Analog Devices

AD7472YRU - 12-Bit 1.5 MSPS ADC | Analog Devices

MPN: AD7472YRU ✓ פעיל
2.7 V to 5.25 V Vdss 24-pin TSSOP Package
כמות הזמנה מינימלית: 1 |

AD7472YRU סקירה

The Analog Devices AD7472YRU is a 12-bit, single-channel, parallel-output successive-approximation analog-to-digital converter capable of 1.5 MSPS throughput from a single 2.7 V to 5.25 V supply. It is packaged in a 24-pin TSSOP surface-mount package for compact data-acquisition and signal-conditioning systems.

An ADC is a data-acquisition IC that converts an analog voltage into a digital code. The AD7472 belongs to the parallel-output SAR ADC family, combining a 12-bit resolution, 1.5 MSPS sampling capability, and low 4 mW power operation in a single package. The AD7470 is the related 10-bit member of the family, while AD7472 provides the higher resolution needed when the input-to-output quantization step must be smaller.

Key characteristics include 12-bit resolution, 1.5 MSPS maximum throughput, a 2.7 V to 5.25 V analog supply range, and a low-noise internal reference. The parallel interface presents the conversion result across dedicated digital output pins, allowing direct connection to a microcontroller, FPGA, DSP, or logic device without requiring a serial data link.

The successive-approximation architecture performs one conversion through a sequence of internal comparator decisions. Its throughput is suitable for industrial process monitoring, sensor acquisition, portable measurement equipment, and embedded control loops. Because the interface is parallel, the host processor must be able to accept and latch 12 bits of conversion data within the available acquisition interval.

A typical implementation places the AD7472 close to the analog input source and routes its digital outputs to a logic device. Short analog traces reduce pickup of noise and switching artifacts, while a solid ground plane and careful separation of analog and digital return currents help preserve conversion accuracy. The manufacturer datasheet should be consulted for the complete pin-description table, recommended input and reference circuits, and acquisition timing diagrams.

The AD7472YRU is suited to designers who require a parallel-output SAR converter with a compact 24-pin TSSOP footprint. AD7472ARU and AD7472BRU provide related temperature-grade choices, while the AD7470 members trade resolution for higher throughput. This page also organizes pricing evidence, replacement guidance, comparison parameters, and practical design notes for faster component selection.

חלופות תחליף ישיר עבור AD7472YRU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם AD7472YRU (אותו גורם צורה וטביעת רגל) — שונים ב Package, Input Type, Number of Channels, Resolution, Architecture.

Analog Devices
Package: 24-TSSOP (RU-24), 4.40 mm width
Input Type: Single-Ended
Number of Channels: 1
השווה עם AD7472YRU →
Analog Devices
Package: TSSOP-24
Input Type: Single-ended
Number of Channels: 1
השווה עם AD7472YRU →

AD7472ARUZ-REEL

✅ Drop-In ⚠️ מפרטים לא מאומתים
Analog Devices
📦 TSSOP-24
12 bits · 1 · SAR (Successive Approximation) · 1.5 MSPS · 2.7 V to 5.25 V · Parallel · 3.34 mW typical · 7.97 mW typical

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD7472BRU-REEL

✅ Drop-In
Analog Devices
📦 TSSOP-24
12 bits · 1.5 MSPS (AD7472 12-bit grade); 1.75 MSPS (AD7470 10-bit grade) · SAR (Successive Approximation) · 1 · 0 V to 2.5 V (with 2.5 V reference) · 2.7 V to 5.25 V · 3.34 mW typ

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD7470ARU

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 TSSOP-24
Resolution is 10 bits instead of 12 bits, a 16.7% reduction, while throughput increases to 1.75 MSPS from 1.5 MSPS

📋 חלופה להתייחסות (לא בקטלוג)

AD7470BRU

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 TSSOP-24
Resolution is 10 bits instead of 12 bits, a 16.7% reduction, while throughput increases to 1.75 MSPS from 1.5 MSPS

📋 חלופה להתייחסות (לא בקטלוג)

AD7472YRU דירוגים מרביים ומאפיינים חשמליים

ADC Type Successive-approximation ADC
רזולוציה 12 bit
Number of Channels 1 channel
Input Type Single-ended analog input
קצב דגימה 1.5 MSPS
Supply Voltage Range 2.7 V to 5.25 V
Power Consumption 4 mW
Output Interface Parallel
מארז 24-pin TSSOP
Package Type TSSOP-24
סוג הרכבה Surface Mount
Reference Internal low-noise reference

מדריך תצורת פינים של AD7472YRU tssop-24

תצורת פינים עבור AD7472YRU (מארזת tssop-24). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת tssop-24 עבור AD7472YRU

אין נתוני פריסת פינים מפורטים עבור AD7472YRU.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

AD7472YRU מתאים עבור 6 יישוםs: Industrial Sensor Acquisition, Precision Data-Acquisition Systems, Embedded Control and Monitoring, Portable Measurement Instruments, Audio and Vibration Monitoring, FPGA-Based Signal Processing.

🏭

Industrial Sensor Acquisition

The AD7472YRU is suitable for acquiring conditioned pressure, temperature, or position signals in industrial measurement systems. Its 12-bit resolution provides a finer digital representation than the 10-bit AD7470 family, while the 1.5 MSPS rate supports moderately fast process-control updates. Place the converter near the sensor interface to keep the analog input trace short, then latch the parallel outputs in an FPGA or microcontroller. The single 2.7 V to 5.25 V supply range supports both 3.3 V and 5 V designs, reducing the number of rails required around the acquisition chain.

📟

Precision Data-Acquisition Systems

The 12-bit resolution and 1.5 MSPS throughput of the AD7472YRU fit compact precision DAQ modules that digitize several slow or medium-speed analog channels through multiplexing. Its parallel output allows the host processor to capture each code with a straightforward digital interface, avoiding the serial overhead of a serial-output converter. The 24-pin TSSOP package also supports dense board layouts, although a dedicated ground plane and short analog routing remain important for preserving measurement quality.

🔧

Embedded Control and Monitoring

The AD7472YRU can serve as the analog front end of an embedded controller that monitors a condition, pressure, or analog process variable and updates a control loop. Its 1.5 MSPS maximum rate is sufficient for many feedback and monitoring tasks, while 12-bit quantization gives the controller more useful information about small input changes. Connect its parallel outputs to the host MCU or DSP and use the acquisition timing from the manufacturer datasheet to establish the conversion and data-latch interval.

📱

Portable Measurement Instruments

The low 4 mW power operation and 2.7 V to 5.25 V supply range of the AD7472YRU suit battery-powered handheld measurement equipment. A 3.3 V implementation can reduce both supply complexity and converter power demand compared with a higher-voltage analog rail, while the parallel outputs can be handled by a low-power embedded controller. Low power does not remove the need for careful reference grounding and analog layout, so the input network and bypass components should remain close to the device.

🎧

Audio and Vibration Monitoring

The AD7472YRU can be used for low-frequency vibration, acoustic, or waveform monitoring where the 12-bit resolution improves visibility of small signal changes and the 1.5 MSPS rate captures the required bandwidth. Place the converter at the output of a low-noise amplifier and anti-alias filter, and route the parallel output to an FPGA timing engine. The application must account for the 10-bit AD7470's higher 1.75 MSPS rate when sampling requirements prioritize maximum speed over output resolution.

🖥️

FPGA-Based Signal Processing

The parallel data bus of the AD7472YRU maps naturally onto an FPGA acquisition pipeline, allowing the conversion code to be captured, filtered, or integrated without a serial interface. The 12-bit output and 1.5 MSPS throughput support continuous moderate-rate sampling, while the 24-pin TSSOP package allows placement near the analog front end. Designers should time the latch event from the acquisition sequence in the manufacturer datasheet and keep digital output routing away from the sensitive analog input and reference paths.

סיכום מוצרים מומלצים

AD7472BRU Same-family 12-bit ADC with a different temperature grade בשימוש ב-: Industrial Sensor Acquisition, Precision Data-Acquisition Systems, Portable Measurement Instruments, Audio and Vibration Monitoring AD7472ARU Same-family 12-bit ADC with a different temperature grade בשימוש ב-: Industrial Sensor Acquisition, Precision Data-Acquisition Systems, Portable Measurement Instruments, FPGA-Based Signal Processing AD7470ARU Higher-throughput 10-bit family alternative where lower resolution is acceptable בשימוש ב-: Embedded Control and Monitoring, Audio and Vibration Monitoring, FPGA-Based Signal Processing AD7470BRU Higher-throughput 10-bit family alternative where lower resolution is acceptable בשימוש ב-: Embedded Control and Monitoring
What is the resolution and sampling rate of AD7472YRU?
The AD7472YRU provides 12-bit resolution at up to 1.5 MSPS sampling throughput. Analog Devices describes the AD7472 as a high-speed, low-power successive-approximation ADC, with the 12-bit configuration operating at up to 1.5 MSPS from a single 2.7 V to 5.25 V supply.
What type of ADC is the AD7472YRU?
The AD7472YRU is a single-channel, 12-bit parallel-output successive-approximation, or SAR, ADC. Its parallel output transfers the sampled conversion result directly to digital logic rather than using a serial data interface, making it suitable for microcontrollers, FPGAs, DSPs, and data-acquisition modules.
What is the supply voltage range of AD7472YRU?
The AD7472YRU operates from a single supply between 2.7 V and 5.25 V. The Analog Devices product description identifies this range for both the 10-bit AD7470 and 12-bit AD7472 members, allowing operation from 3.3 V or 5 V system rails.
Where can I download the AD7472YRU datasheet?
The official AD7472 datasheet and product information are available from the Analog Devices product page at https://www.analog.com/en/products/ad7472.html. That page provides the manufacturer data sheet and device resources, while the AD7472YRU-specific pin and package details should be matched against the 24-pin TSSOP ordering information.
Where can I find the AD7472YRU pinout?
Use the pin-description table and package drawing in the Analog Devices AD7472 data sheet to locate the AD7472YRU pinout. The component is specified in a 24-pin TSSOP package, and its parallel data outputs, analog input, supply pins, reference pins, and control signals must be assigned exactly as shown in the manufacturer diagram.
Is AD7472YRU suitable for sensor measurement and industrial control?
Yes, the AD7472YRU fits sensor measurement and industrial control designs that need 12-bit resolution at up to 1.5 MSPS. Its single-channel SAR architecture, 2.7 V to 5.25 V operating range, and parallel interface allow a conditioned transducer signal to be measured by a microcontroller or FPGA with a relatively simple acquisition circuit.
What is the difference between AD7472YRU and AD7472ARU?
The AD7472YRU and AD7472ARU are members of the same 12-bit AD7472 family and use the same 24-pin TSSOP interface. Their principal distinction is the ordering temperature grade, so the correct selection depends on the required ambient-temperature range and qualification conditions of the finished equipment.
What is the difference between AD7472YRU and AD7472BRU?
The AD7472YRU and AD7472BRU share the 12-bit SAR architecture, 1.5 MSPS throughput class, 2.7 V to 5.25 V supply range, and 24-pin TSSOP footprint. The ordering suffix identifies the temperature grade, so engineers should choose the grade that covers the product's ambient-temperature and reliability requirements.
When should I choose AD7472YRU instead of an AD7470 device?
Choose the AD7472YRU when 12-bit resolution is more important than maximizing conversion speed. The AD7470 is the 10-bit family member and reaches up to 1.75 MSPS, while the AD7472 provides 12-bit resolution at up to 1.5 MSPS, reducing the quantization step at the expense of some throughput.
Can AD7470BRU replace AD7472YRU as a drop-in part?
AD7470BRU can be considered for designs that tolerate a resolution change, but it is not an exact functional substitute. It provides 10-bit resolution at up to 1.75 MSPS compared with the AD7472YRU's 12-bit resolution at up to 1.5 MSPS, so firmware scaling and signal-accuracy requirements must be reviewed before substitution.
What can replace AD7472YRU on the same PCB?
The closest drop-in choices are temperature-grade variants of the AD7472 in the same 24-pin TSSOP footprint, including AD7472ARU and AD7472BRU. AD7470BRU and AD7470ARU share the family architecture but reduce resolution from 12 bits to 10 bits, making them suitable only when the lower quantization accuracy is acceptable.
What are the key specifications of AD7472YRU that engineers should know?
The key AD7472YRU specifications are 12-bit resolution, 1.5 MSPS maximum sampling rate, one analog input, a 2.7 V to 5.25 V single-supply range, 4 mW power operation, a parallel output interface, and a 24-pin TSSOP package. These values define the part's suitability for compact, single-channel data-acquisition systems.
Where can I buy AD7472YRU online?
Use the Request a Quote form on this page to request current AD7472YRU availability, quantity breaks, and delivery terms. The form allows buyers to obtain a current quotation for the exact 24-pin TSSOP ordering code without relying on an outdated listing or an unconfirmed stock position.
What is the current price of AD7472YRU?
Submit the Request a Quote form on this page for a current AD7472YRU quotation. Pricing is maintained dynamically because component costs, availability, and volume requirements vary; the form accepts the exact MPN and requested quantity for a transaction-ready response.
What is the lead time and stock status of AD7472YRU?
Request the current AD7472YRU lead time and allocation through the Request a Quote form on this page. A distributor listing alone does not guarantee a current stock position, so the manufacturing and delivery window should be confirmed for the required quantity and date before committing the design.

נתוני עזר הנדסיים עבור AD7472YRU — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the AD7472YRU when the design requires 12-bit quantization, parallel output, and a conversion rate up to 1.5 MSPS from a 2.7 V to 5.25 V supply. AD7472ARU and AD7472BRU are the most direct replacements because they preserve the same resolution, interface, and TSSOP-24 footprint; select the ordering suffix according to the required temperature grade and qualification environment. Consider AD7470ARU or AD7470BRU only when 10-bit resolution is acceptable and the extra throughput of 1.75 MSPS provides a functional benefit. The AD7470 options are not exact replacements because their output codes have fewer bits and require different scaling in the acquisition system. For any substitution, verify the pin assignments, acquisition timing, analog input range, reference behavior, and temperature limits against the manufacturer data sheet before releasing the PCB.

השוואה עם חלופות

פרמטר מוצר זה AD7472ARU AD7472BRU AD7470ARU AD7470BRU
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package TSSOP-24 TSSOP-24 TSSOP-24 TSSOP-24 TSSOP-24
Resolution 12 bit 12 bit 12 bit 10 bit 10 bit
Sampling Rate 1.5 MSPS 1.5 MSPS 1.5 MSPS 1.75 MSPS 1.75 MSPS
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V
ADC Architecture Successive approximation Successive approximation Successive approximation Successive approximation Successive approximation
Number of Channels 1 channel 1 channel 1 channel 1 channel 1 channel
Output Interface Parallel Parallel Parallel Parallel Parallel
Temperature Grade Y suffix ordering grade A suffix ordering grade B suffix ordering grade A suffix ordering grade B suffix ordering grade

מבדילים עיקריים

  • Higher conversion resolution within the same family (לעומתAD7470ARU)
  • Same-footprint temperature-grade flexibility (לעומתAD7472BRU)
  • Resolution prioritized over maximum throughput (לעומתAD7470BRU)

הערות תכנון

Route the analog input directly from the sensing or conditioning circuit to the AD7472YRU input pin, and keep the digital output traces away from that path. A continuous ground plane under the analog section helps establish a low-impedance return. Place supply-bypass and reference components close to their associated pins, following the layout and component values shown in the Analog Devices data sheet.

Capture each conversion using the conversion-complete timing and acquisition interval defined in the manufacturer data sheet. Because the AD7472YRU uses a parallel interface, the receiving FPGA or MCU must meet the setup and hold requirements at the indicated sampling edge. Avoid deriving an equivalent timing sequence solely from the 1.5 MSPS headline rate.

Do not treat an AD7470 device as an exact AD7472YRU replacement. The AD7470 family operates at up to 1.75 MSPS but provides only 10-bit resolution, whereas the AD7472 provides 12 bits at up to 1.5 MSPS. A substitution may also require firmware rescaling and verification of the full-scale code range before it is approved for production.

Design the analog and digital supplies around the 2.7 V to 5.25 V operating range. Bypass each supply connection at the device with the capacitance and placement recommended in the manufacturer data sheet, and keep switching-regulator loops and their high-current paths away from the analog input and reference network.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available product information identifies the AD7472 family as a low-power ADC but does not provide explicit RoHS, REACH, halogen-free, or conflict-minerals declarations. AEC-Q100 status is marked not applicable because the part is not identified as an automotive-qualified device.

הנתונים אומתו בתאריך: 2026-11-18 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

AD7472YRU datasheet AD7472YRU pinout AD7472YRU datasheet pdf AD7472YRU specifications AD7472YRU TSSOP-24 pinout AD7472 12-bit ADC application circuit AD7472YRU vs AD7472BRU AD7472YRU vs AD7470BRU AD7472YRU equivalent AD7472YRU drop-in replacement AD7472YRU price AD7472YRU stock Analog Devices AD7472YRU AD7472YRU lead time AD7472YRU schematic

רכיבים ומונחים קשורים

Analog Devices AD7472YRU AD7472ARU AD7472BRU AD7470ARU AD7470BRU ADC analog-to-digital converter successive-approximation ADC SAR ADC 12-bit resolution 1.5 MSPS throughput parallel output interface TSSOP-24 TSSOP package family surface mount single-channel ADC 2.7 V to 5.25 V supply low-power conversion internal reference data acquisition industrial sensor measurement FPGA acquisition embedded control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר