ADM237LAR - 5V 120kbps RS-232 Transceiver | Analog Devices
MPN: ADM237LAR ✗ اختتامِ زندگیADM237LAR جائزہ
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 levels back into digital logic. The RS-232 interface belongs to the broader interface-IC and data-communication semiconductor categories. It is intended for point-to-point serial links between computers, industrial controllers, test equipment, and peripheral systems where single-ended logic cannot directly meet the EIA-232-E and V.28 voltage requirements.
The ADM237LAR combines five transmit channels and three receive channels, allowing several communications ports to share one package. Its 120 kB/s maximum data rate supports moderate-speed control and instrumentation links. Operation from a single 4.75 V to 5.25 V supply simplifies system power design because the integrated converters generate the bipolar voltage levels needed by RS-232 drivers without requiring a separate negative supply rail.
The onboard DC-DC architecture is a key technical feature because it separates the device's 5 V supply requirement from the higher-amplitude RS-232 signal levels. This allows the IC to operate from common 5 V logic systems while maintaining approximately ±9 V driver swing. The CMOS implementation combines this voltage-generation capability with a 24-lead surface-mount package suitable for compact equipment.
Typical applications include industrial serial controllers, laboratory data-logging equipment, point-of-sale systems, security equipment, and embedded service interfaces. The five-driver, three-receiver arrangement is particularly useful when a system needs multiple unidirectional outputs and several inputs on the same RS-232 port. Its 120 kB/s limit should be treated as the design ceiling when choosing cable length, baud rate, and protocol timing.
The main design consideration is that ADM237LAR is listed as obsolete. Existing equipment can be maintained with this device when exact functional continuity is required, but new designs should evaluate a current interface product and confirm pin compatibility, supply requirements, and driver direction assignments before making any substitution. Use the manufacturer pin-description table when assigning PCB tracks and connecting external charge-pump capacitors.
This page combines the device's key RS-232 characteristics, lifecycle status, sourcing information, and engineering guidance with comparison-oriented selection criteria. It helps designers distinguish the ADM237LAR from lower-speed, higher-voltage, or differently pinned interface circuits while emphasizing the need for schematic-level verification before replacement.
کے لیے ڈراپ اِن متبادل ADM237LAR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADM237LAR (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Output Swing, Package, Product Type.
ADM237LAN
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADM237LARZ
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADM237LARZ-R7
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADM237LAR تفصیلات
| Product Type | 5/3 RS-232 transceiver |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Nominal Supply Voltage | 5 V |
| ڈیٹا ریٹ | 120 kB/s maximum |
| Driver Count | 5 |
| Receiver Count | 3 |
| Output Swing | Approximately ±9 V |
| Integrated Voltage Conversion | Onboard DC-DC converters |
| Logic Standard | CMOS |
| Interface Standard | EIA-232-E and V.28 |
| پیکیج | 24-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount |
| لائف سائیکل کی حالت | Obsolete |
ADM237LAR 24-pin soic پن کنفیگریشن گائیڈ
ADM237LAR (24-pin soic پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADM237LAR.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ADM237LAR کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial RS-232 Controllers, Laboratory Data-Logging Equipment, Point-of-Sale and Peripheral Systems, Security and Access-Control Systems, Embedded Service Interfaces, Serial Test and Measurement Fixtures.
Industrial RS-232 Controllers
The ADM237LAR fits industrial controllers that require several point-to-point RS-232 channels on a single logic board. Its five drivers and three receivers allow one 24-pin SOIC to replace multiple separate line-interface circuits, while operation from 4.75 V to 5.25 V simplifies integration with 5 V control electronics. The maximum 120 kB/s data rate is suitable for command, status, and sensor traffic rather than high-volume video transfer. Because the part is obsolete, it is most appropriate for maintaining an existing controller or reproducing a proven legacy design after checking device qualification and long-term sourcing.
تجویز کردہ
Laboratory Data-Logging Equipment
The ADM237LAR can support laboratory instruments that exchange commands and measurement records through RS-232. A 120 kB/s maximum rate is adequate for many short control and logging packets, while the 5/3 channel arrangement can handle multiple instrument outputs and computer inputs. Its onboard DC-DC converters eliminate the need for a separate negative rail, making the interface practical in compact 5 V instruments. When laying out the board, place the device near the connector and use a short return path to limit noise coupling into sensitive measurement circuitry.
تجویز کردہ
Point-of-Sale and Peripheral Systems
The ADM237LAR is suitable for legacy point-of-sale equipment in which several peripherals share a common RS-232 interface structure. Five driver channels can support independent outbound connections, while three receiver channels handle inbound device responses. The 120 kB/s limit is appropriate for transactional commands and status traffic but should be checked against burst size and response timing. Its 24-pin SOIC package permits compact surface-mount assembly, and integrated DC-DC conversion means the surrounding electronics can use a single 5 V supply rather than a separate bipolar rail.
تجویز کردہ
Security and Access-Control Systems
The ADM237LAR can be used in legacy access-control panels that need multiple RS-232 links for readers, controllers, or service equipment. Its 5/3 configuration reduces the number of interface packages needed when several unidirectional links are required, while the 4.75 V to 5.25 V operating range supports conventional 5 V embedded systems. The 120 kB/s data rate is more than sufficient for typical commands and short status records. Designers should protect the external RS-232 connector appropriately and verify line protection requirements separately from the IC's internal driver specifications.
تجویز کردہ
Embedded Service Interfaces
The ADM237LAR is useful in embedded service equipment that exposes configuration and diagnostic ports through RS-232. Five transmit and three receive channels allow a single device to support several service connections or unidirectional command paths, and the 120 kB/s maximum rate suits firmware-download and diagnostic traffic at moderate speeds. Integrated DC-DC converters simplify the supply arrangement by deriving the required bipolar driver levels from 5 V. Because the ADM237LAR is obsolete, maintenance teams should preserve the original footprint and pin functions when exact compatibility is necessary.
تجویز کردہ
Serial Test and Measurement Fixtures
The ADM237LAR can support test fixtures that communicate with instruments or boards over several RS-232 ports. Its five drivers permit multiple command outputs, while three receivers can collect responses from more than one endpoint. The 120 kB/s limit suits low- and moderate-speed automated test sequences with short command frames. Running from 4.75 V to 5.25 V allows straightforward integration into common 5 V test fixtures, and onboard DC-DC converters reduce supply complexity. Place decoupling close to the device and route RS-232 outputs away from sensitive analog sections to minimize coupling.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADM237LAR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADM237LAN | ADM237LARZ | ADM237LARZ-R7 |
|---|---|---|---|---|
| Package | SOIC-24 | SOIC-24 | SOIC-24 | SOIC-24 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Device Type | 5/3 RS-232 transceiver | 5/3 RS-232 transceiver | 5/3 RS-232 transceiver | 5/3 RS-232 transceiver |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Maximum Data Rate | 120 kB/s | 120 kB/s | 120 kB/s | 120 kB/s |
| Driver Count | 5 | 5 | 5 | 5 |
| Receiver Count | 3 | 3 | 3 | 3 |
| Output Swing | Approximately ±9 V | Approximately ±9 V | Approximately ±9 V | Approximately ±9 V |
| Integrated DC-DC Converters | Yes | Yes | Yes | Yes |
| Interface Standards | EIA-232-E and V.28 | EIA-232-E and V.28 | EIA-232-E and V.28 | EIA-232-E and V.28 |
اہم امتیازی خصوصیات
- Five transmit channels and three receive channels in one package (بمقابلہADM232AARWZ)
- Single 5 V supply with integrated bipolar voltage generation (بمقابلہADM232AARWZ)
- Direct family continuity for existing 24-pin designs (بمقابلہADM237LARZ)
ڈیزائن نوٹس
Place the ADM237LAR close to the RS-232 connector and route each driver and receiver trace as a short point-to-point path. Keep the logic-side connections away from the high-swing RS-232 nets to reduce capacitive coupling. Use a continuous ground reference and avoid sharing narrow return paths between the interface connector and sensitive circuitry.
Connect the 5 V supply and ground pins using short, low-impedance traces, and place the manufacturer's recommended local capacitors directly beside the corresponding pins. The onboard DC-DC converters generate the bipolar voltage required by the drivers, so supply layout should minimize switching-current loops. Confirm capacitor voltage rating, tolerance, and placement against the datasheet typical application circuit before release.
Do not treat the ADM237LAN, ADM237LARZ, or ADM237LARZ-R7 ordering variants as interchangeable until their temperature, qualification, marking, and lifecycle details have been checked. The channel direction and enable behavior must also be compared with the original schematic. A shared 24-pin SOIC outline alone does not prove identical lead functions or external component requirements.
For RS-232 links operating near the 120 kB/s maximum, use a clean ground reference and route the cable-side nets away from clocks, relays, switching regulators, and high-current return paths. Avoid long stubs and unnecessary vias on signal nets. If an enclosure cable is long or adjacent to noisy equipment, evaluate external protection and filtering separately from the transceiver's internal receiver characteristics.
تعمیل کی معلومات
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact MPN. The ADM237LAR is listed as obsolete. Check the manufacturer product documentation, material declaration, and the ordering code of any proposed replacement.