Analog Devices

ADM237LAR - 5V 120kbps RS-232 Transceiver | Analog Devices

부품 번호: ADM237LAR ✗ 단종
4.75 V to 5.25 V Vdss 24-pin SOIC Package
MOQ: 1 |

ADM237LAR 개요

Analog Devices ADM237LAR is a 5 V powered CMOS RS-232 interface IC integrating five drivers, three receivers, and onboard DC-DC converters in a 24-pin SOIC package. It supports a 4.75 V to 5.25 V supply, operates at up to 120 kB/s, and provides approximately ±9 V output swing. The device is designed for compact point-to-point serial interfaces where transmitter bias voltages must be generated from a single low-voltage supply.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 levels back into digital logic. The RS-232 interface belongs to the broader interface-IC and data-communication semiconductor categories. It is intended for point-to-point serial links between computers, industrial controllers, test equipment, and peripheral systems where single-ended logic cannot directly meet the EIA-232-E and V.28 voltage requirements.

The ADM237LAR combines five transmit channels and three receive channels, allowing several communications ports to share one package. Its 120 kB/s maximum data rate supports moderate-speed control and instrumentation links. Operation from a single 4.75 V to 5.25 V supply simplifies system power design because the integrated converters generate the bipolar voltage levels needed by RS-232 drivers without requiring a separate negative supply rail.

The onboard DC-DC architecture is a key technical feature because it separates the device's 5 V supply requirement from the higher-amplitude RS-232 signal levels. This allows the IC to operate from common 5 V logic systems while maintaining approximately ±9 V driver swing. The CMOS implementation combines this voltage-generation capability with a 24-lead surface-mount package suitable for compact equipment.

Typical applications include industrial serial controllers, laboratory data-logging equipment, point-of-sale systems, security equipment, and embedded service interfaces. The five-driver, three-receiver arrangement is particularly useful when a system needs multiple unidirectional outputs and several inputs on the same RS-232 port. Its 120 kB/s limit should be treated as the design ceiling when choosing cable length, baud rate, and protocol timing.

The main design consideration is that ADM237LAR is listed as obsolete. Existing equipment can be maintained with this device when exact functional continuity is required, but new designs should evaluate a current interface product and confirm pin compatibility, supply requirements, and driver direction assignments before making any substitution. Use the manufacturer pin-description table when assigning PCB tracks and connecting external charge-pump capacitors.

This page combines the device's key RS-232 characteristics, lifecycle status, sourcing information, and engineering guidance with comparison-oriented selection criteria. It helps designers distinguish the ADM237LAR from lower-speed, higher-voltage, or differently pinned interface circuits while emphasizing the need for schematic-level verification before replacement.

드롭인 대체품: ADM237LAR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADM237LAR (동일 폼 팩터 및 풋프린트) — 차이점: Output Swing, Package, Product Type.

Analog Devices
Output Swing: 9 V from a 5 V supply
Package: 20-lead SSOP
Product Type: 5 V-powered CMOS RS-232 drivers/receivers
비교 대상: ADM237LAR →

ADM237LAN

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 SOIC-24
5/3 RS-232 transceiver · 5 V · CMOS · 120 kB/s · EIA-232-E and V.28 · 5 · 3 · Onboard

가격 문의

데이터시트 보기 →

ADM237LARZ

✅ 드롭인 ⚠️ 사양 미검증
📦 SOIC-24
Driver count 5 vs 5 (0%), receiver count 3 vs 3 (0%), supply range 4.75 V to 5.25 V vs 4.75 V to 5.25 V (0%); ordering qualification differs

📋 참조 대체품 (카탈로그에 없음)

ADM237LARZ-R7

✅ 드롭인 ⚠️ 사양 미검증
📦 SOIC-24
Driver count 5 vs 5 (0%), receiver count 3 vs 3 (0%), data rate 120 kB/s vs 120 kB/s (0%); qualification suffix differs

📋 참조 대체품 (카탈로그에 없음)

ADM237LAR 사양

Product Type 5/3 RS-232 transceiver
Supply Voltage Range 4.75 V to 5.25 V
Nominal Supply Voltage 5 V
데이터 속도 120 kB/s maximum
Driver Count 5
Receiver Count 3
Output Swing Approximately ±9 V
Integrated Voltage Conversion Onboard DC-DC converters
Logic Standard CMOS
Interface Standard EIA-232-E and V.28
패키지 24-pin SOIC
실장 유형 Surface mount
수명 주기 상태 Obsolete

ADM237LAR 24-pin soic 핀 구성 가이드

ADM237LAR(24-pin soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ADM237LAR의 24-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ADM237LAR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ADM237LAR 적합 용도: 6 애플리케이션s: Industrial RS-232 Controllers, Laboratory Data-Logging Equipment, Point-of-Sale and Peripheral Systems, Security and Access-Control Systems, Embedded Service Interfaces, Serial Test and Measurement Fixtures.

🏭

Industrial RS-232 Controllers

The ADM237LAR fits industrial controllers that require several point-to-point RS-232 channels on a single logic board. Its five drivers and three receivers allow one 24-pin SOIC to replace multiple separate line-interface circuits, while operation from 4.75 V to 5.25 V simplifies integration with 5 V control electronics. The maximum 120 kB/s data rate is suitable for command, status, and sensor traffic rather than high-volume video transfer. Because the part is obsolete, it is most appropriate for maintaining an existing controller or reproducing a proven legacy design after checking device qualification and long-term sourcing.

🖥️

Laboratory Data-Logging Equipment

The ADM237LAR can support laboratory instruments that exchange commands and measurement records through RS-232. A 120 kB/s maximum rate is adequate for many short control and logging packets, while the 5/3 channel arrangement can handle multiple instrument outputs and computer inputs. Its onboard DC-DC converters eliminate the need for a separate negative rail, making the interface practical in compact 5 V instruments. When laying out the board, place the device near the connector and use a short return path to limit noise coupling into sensitive measurement circuitry.

🖥️

Point-of-Sale and Peripheral Systems

The ADM237LAR is suitable for legacy point-of-sale equipment in which several peripherals share a common RS-232 interface structure. Five driver channels can support independent outbound connections, while three receiver channels handle inbound device responses. The 120 kB/s limit is appropriate for transactional commands and status traffic but should be checked against burst size and response timing. Its 24-pin SOIC package permits compact surface-mount assembly, and integrated DC-DC conversion means the surrounding electronics can use a single 5 V supply rather than a separate bipolar rail.

🎥

Security and Access-Control Systems

The ADM237LAR can be used in legacy access-control panels that need multiple RS-232 links for readers, controllers, or service equipment. Its 5/3 configuration reduces the number of interface packages needed when several unidirectional links are required, while the 4.75 V to 5.25 V operating range supports conventional 5 V embedded systems. The 120 kB/s data rate is more than sufficient for typical commands and short status records. Designers should protect the external RS-232 connector appropriately and verify line protection requirements separately from the IC's internal driver specifications.

🔧

Embedded Service Interfaces

The ADM237LAR is useful in embedded service equipment that exposes configuration and diagnostic ports through RS-232. Five transmit and three receive channels allow a single device to support several service connections or unidirectional command paths, and the 120 kB/s maximum rate suits firmware-download and diagnostic traffic at moderate speeds. Integrated DC-DC converters simplify the supply arrangement by deriving the required bipolar driver levels from 5 V. Because the ADM237LAR is obsolete, maintenance teams should preserve the original footprint and pin functions when exact compatibility is necessary.

🖥️

Serial Test and Measurement Fixtures

The ADM237LAR can support test fixtures that communicate with instruments or boards over several RS-232 ports. Its five drivers permit multiple command outputs, while three receivers can collect responses from more than one endpoint. The 120 kB/s limit suits low- and moderate-speed automated test sequences with short command frames. Running from 4.75 V to 5.25 V allows straightforward integration into common 5 V test fixtures, and onboard DC-DC converters reduce supply complexity. Place decoupling close to the device and route RS-232 outputs away from sensitive analog sections to minimize coupling.

추천 제품 요약

MC3487DE4 Texas Instruments 사용처: Industrial RS-232 Controllers MC3488AP1 onsemi 사용처: Industrial RS-232 Controllers ADM232AARWZ RS-232 interface companion for point-to-point links 사용처: Laboratory Data-Logging Equipment, Serial Test and Measurement Fixtures ADM237LAN Analog Devices 사용처: Laboratory Data-Logging Equipment, Embedded Service Interfaces MC74F243M onsemi 사용처: Point-of-Sale and Peripheral Systems ADM237LARZ Same-family RS-232 interface alternative 사용처: Point-of-Sale and Peripheral Systems DS90CR213MTD Texas Instruments 사용처: Security and Access-Control Systems ADM237LARZ-R7 Same-family RS-232 interface alternative 사용처: Security and Access-Control Systems MC74F538N onsemi 사용처: Embedded Service Interfaces TS934IDT STMicroelectronics 사용처: Serial Test and Measurement Fixtures
What is the ADM237LAR?
The ADM237LAR is a 5 V powered CMOS RS-232 transceiver with five drivers, three receivers, and onboard DC-DC converters in a 24-pin SOIC package. According to the Analog Devices datasheet family information, it meets EIA-232-E and V.28 requirements while operating from 4.75 V to 5.25 V. The integrated converters allow bipolar RS-232 signal generation from a single low-voltage supply.
What is the operating voltage of ADM237LAR?
The ADM237LAR operates from a 4.75 V to 5.25 V single supply. According to the Analog Devices ADM237L datasheet, the circuit is designed around a nominal 5 V supply and includes onboard DC-DC converters that generate the voltage required for approximately ±9 V RS-232 output swing. The external system therefore does not need to provide a separate negative supply rail.
How many RS-232 drivers and receivers does ADM237LAR contain?
The ADM237LAR contains five RS-232 drivers and three RS-232 receivers. According to the Analog Devices ADM237L datasheet family information, this 5/3 configuration supports multiple point-to-point channels in one 24-pin SOIC package. It is useful when a design requires several unidirectional outputs and several inputs without placing a separate single-channel transceiver at every connection.
What is the maximum data rate of ADM237LAR?
The ADM237LAR supports a maximum data rate of 120 kB/s. According to the Analog Devices ADM237L datasheet family information, the device is intended for moderate-speed RS-232 links rather than high-speed differential communication. Designers should configure the serial baud rate below this limit and also evaluate the complete system for synchronization, cable, and protocol constraints.
Where can I download the ADM237LAR datasheet PDF?
The ADM237LAR datasheet should be obtained from the Analog Devices ADM237L product documentation. The manufacturer documentation identifies the device as a 5 V powered CMOS RS-232 transceiver with five drivers, three receivers, 120 kB/s operation, and onboard DC-DC converters. Use the pin-description table and typical application diagrams when preparing a replacement schematic or confirming capacitor connections.
Where can I find the ADM237LAR pinout?
The ADM237LAR pinout is shown in the manufacturer datasheet and includes 24 leads in the 24-pin SOIC package. Use the pin-description table for the authoritative assignments because enable, shutdown, receiver-output, driver-input, charge-pump, and ground connections must be wired exactly as specified. The package diagram should be checked against the physical orientation mark before assembly.
Is ADM237LAR still active?
No, the ADM237LAR is listed as obsolete. The lifecycle designation means new availability should not be assumed for current production designs. For repairing an existing installation, an exact functional match may be appropriate, but for a new product, review current RS-232 interface ICs and verify pin arrangement, channel direction, supply voltage, logic levels, and external component requirements.
What can replace the ADM237LAR?
The closest replacement must be selected from an RS-232 transceiver with the same 24-pin SOIC footprint, five drivers, three receivers, 5 V supply, and compatible enable or shutdown behavior. The ADM237L family ordering variants offer the strongest continuity because their channel count, supply range, and 120 kB/s data rate match the ADM237LAR. A schematic and pin-table comparison is still required before treating any candidate as a drop-in replacement.
What is the best drop-in replacement for ADM237LAR?
The best drop-in replacement is the ordering variant that preserves the 24-pin SOIC footprint and the 5/3 channel arrangement without changing enable polarity or external charge-pump connections. Compatible ADM237L-family parts retain 5 V operation, five drivers, three receivers, and 120 kB/s operation. Confirm the exact pin assignments and lifecycle status in the manufacturer documentation before committing a replacement to production.
Is the ADM237LAN equivalent to the ADM237LAR?
The ADM237LAN belongs to the same ADM237L family and retains the fundamental 5/3 RS-232 configuration, 4.75 V to 5.25 V supply range, 120 kB/s data rate, and 24-pin SOIC format. It can therefore be considered a close family alternative. Verify temperature qualification, enable-pin behavior, and every external connection against the datasheet pin table before using it as a direct replacement.
Is ADM237LAR suitable for industrial equipment?
The ADM237LAR is technically suitable for RS-232 connections in industrial controllers, laboratory instruments, and service equipment because it supports 120 kB/s and provides five transmit and three receive channels. The manufacturer identifies the device as obsolete, so lifecycle planning is critical. Confirm the temperature range, electromagnetic environment, isolation requirements, and availability of a supported successor before new deployment.
ADM237LAR versus ADM237LARZ: which should be selected?
The ADM237LAR and ADM237LARZ are closely related ADM237L family configurations with the same core 5/3 RS-232 functionality and 120 kB/s maximum data rate. The ordering codes can differ in qualification or environmental designation, which must be checked rather than assumed. Compare the manufacturer ordering guide, temperature ratings, package marking, and lifecycle records to determine whether the Z-qualified version satisfies the intended use.
When should I choose the ADM237LAR over a single-channel RS-232 transceiver?
Choose the ADM237LAR when the interface needs five transmit channels and three receive channels in one 24-pin SOIC package. A single-channel transceiver can be simpler when the design has only one or two RS-232 lines, and it may offer a current lifecycle choice. The ADM237LAR is most valuable in multi-channel legacy equipment where changing the board footprint or consolidating logic would be impractical.
Where can I buy ADM237LAR and what is its lead time?
Use the Request a Quote form on this page for current ADM237LAR sourcing, stock confirmation, and lead-time information. The device is listed as obsolete, so its availability may be limited and should not be inferred from historic catalog records. Provide the required quantity, package marking, date-code preference, and inspection requirements when requesting a quotation.
What is the price of ADM237LAR?
Current pricing for the obsolete ADM237LAR should be obtained through the Request a Quote form on this page. Quote and market conditions can change with quantity, condition, date code, traceability, and inspection requirements, so a static figure would be misleading. Include your annual usage and required packaging details to obtain a meaningful quotation.
Is ADM237LAR in stock?
Current ADM237LAR inventory should be confirmed through the Request a Quote form on this page. Because the manufacturer lifecycle designation is obsolete, stock may consist of remaining production or inventory rather than newly manufactured material. Specify your required quantity, acceptable date code, and traceability requirements so the quotation can reflect the material actually available.
What are the key specifications of ADM237LAR that engineers should know?
The key ADM237LAR specifications are 4.75 V to 5.25 V operation, five drivers, three receivers, a 120 kB/s maximum data rate, approximately ±9 V output swing, onboard DC-DC converters, and a 24-pin SOIC package. According to the Analog Devices datasheet family information, the circuit meets EIA-232-E and V.28 specifications. Its obsolete lifecycle status is also a critical sourcing consideration.

엔지니어링 참조 데이터: ADM237LAR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ADM237LAR when maintaining or reproducing a legacy system that requires a 24-pin SOIC RS-232 transceiver with five drivers, three receivers, 5 V operation, and up to 120 kB/s. Its integrated DC-DC converters simplify systems that otherwise need a separate negative rail. Select ADM237LAN when its specific qualification and lifecycle record better matches the operating environment, or ADM237LARZ and ADM237LARZ-R7 when their ordering qualification is appropriate. All listed family alternatives preserve the principal channel counts, supply range, and data rate, but the manufacturer pin table must still be checked for enable behavior and external connections. Consider a current single-channel or multi-channel RS-232 product for a new design unless redesigning the board and changing the interface strategy is acceptable. Avoid selecting a same-package part solely by outline; logic direction, shutdown control, capacitor requirements, temperature rating, and qualification can prevent a true drop-in upgrade.

대체품과의 비교

파라미터 이 제품 ADM237LAN ADM237LARZ ADM237LARZ-R7
Package SOIC-24 SOIC-24 SOIC-24 SOIC-24
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Device Type 5/3 RS-232 transceiver 5/3 RS-232 transceiver 5/3 RS-232 transceiver 5/3 RS-232 transceiver
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V
Maximum Data Rate 120 kB/s 120 kB/s 120 kB/s 120 kB/s
Driver Count 5 5 5 5
Receiver Count 3 3 3 3
Output Swing Approximately ±9 V Approximately ±9 V Approximately ±9 V Approximately ±9 V
Integrated DC-DC Converters Yes Yes Yes Yes
Interface Standards EIA-232-E and V.28 EIA-232-E and V.28 EIA-232-E and V.28 EIA-232-E and V.28

주요 차별점

  • Five transmit channels and three receive channels in one package (vs ADM232AARWZ)
  • Single 5 V supply with integrated bipolar voltage generation (vs ADM232AARWZ)
  • Direct family continuity for existing 24-pin designs (vs ADM237LARZ)

설계 노트

Place the ADM237LAR close to the RS-232 connector and route each driver and receiver trace as a short point-to-point path. Keep the logic-side connections away from the high-swing RS-232 nets to reduce capacitive coupling. Use a continuous ground reference and avoid sharing narrow return paths between the interface connector and sensitive circuitry.

Connect the 5 V supply and ground pins using short, low-impedance traces, and place the manufacturer's recommended local capacitors directly beside the corresponding pins. The onboard DC-DC converters generate the bipolar voltage required by the drivers, so supply layout should minimize switching-current loops. Confirm capacitor voltage rating, tolerance, and placement against the datasheet typical application circuit before release.

Do not treat the ADM237LAN, ADM237LARZ, or ADM237LARZ-R7 ordering variants as interchangeable until their temperature, qualification, marking, and lifecycle details have been checked. The channel direction and enable behavior must also be compared with the original schematic. A shared 24-pin SOIC outline alone does not prove identical lead functions or external component requirements.

For RS-232 links operating near the 120 kB/s maximum, use a clean ground reference and route the cable-side nets away from clocks, relays, switching regulators, and high-current return paths. Avoid long stubs and unnecessary vias on signal nets. If an enclosure cable is long or adjacent to noisy equipment, evaluate external protection and filtering separately from the transceiver's internal receiver characteristics.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact MPN. The ADM237LAR is listed as obsolete. Check the manufacturer product documentation, material declaration, and the ordering code of any proposed replacement.

데이터 검증일: 2026-11-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ADM237LAR datasheet ADM237LAR pinout ADM237LAR datasheet pdf ADM237LAR equivalent ADM237LAR replacement ADM237LAR cross reference ADM237LAR vs ADM237LAN ADM237LAR vs ADM237LARZ ADM237LAR price ADM237LAR stock Analog Devices ADM237LAR ADM237LAR SOIC-24 ADM237LAR RS-232 transceiver ADM237LAR industrial controller What is the best replacement for ADM237LAR?

관련 부품 & 용어

Analog Devices ADM237LAR ADM237LAN ADM237LARZ ADM237LARZ-R7 RS-232 transceiver RS-232 interface IC interface IC CMOS transceiver EIA-232-E V.28 DC-DC converter 120 kB/s 5 V power supply 4.75 V to 5.25 V 5/3 transceiver SOIC-24 surface mount SMD industrial automation laboratory instrumentation point-of-sale equipment RS-232 driver RS-232 receiver
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기