IRFR540ZTRPBF - 100V N-Ch MOSFET, 35A, DPAK | Infineon
MPN: IRFR540ZTRPBF ✓ NakahandaIRFR540ZTRPBF Ulas
An N-channel power MOSFET is a voltage-controlled semiconductor switch that uses an insulated gate to modulate current flow between drain and source. When the gate-source voltage exceeds the threshold, a conductive channel forms, allowing current to flow with very low resistance. N-channel MOSFETs sit within the broader hierarchy of discrete semiconductors -> transistors -> MOSFETs -> power MOSFETs, and are the workhorse switching element in DC-DC converters, motor drives, and power-management circuits across industrial, automotive, and consumer systems.
Key features include a drain-source breakdown voltage of 100 V, continuous drain current up to 35 A at case temperature, pulsed current capability significantly higher, avalanche-rated body diode for inductive switching, and a logic-compatible gate threshold. The DPAK (TO-252AA) package exposes the drain tab for direct PCB heatsinking, achieving low thermal resistance in a compact surface-mount footprint that is the de-facto industry standard for medium-power applications.
The device leverages Infineon's proprietary IR MOSFET cell design, which optimizes the trade-off between on-resistance, switching speed, and avalanche ruggedness. With 28.5 mOhm Rds(on) and 39 nC Qg, conduction and switching losses are balanced for hard-switched topologies operating from single-digit to low-hundred kilohertz. The avalanche-rated intrinsic body diode further allows reliable operation in half-bridge and freewheeling configurations.
Typical applications include DC-DC converters (buck and synchronous-rectifier stages), motor-driver H-bridges and half-bridges, solenoid and relay drivers, battery protection circuits, and eMobility auxiliary systems such as 12 V/24 V/48 V load management. The 100 V rating provides comfortable headroom for 24 V industrial buses and 48 V mild-hybrid automotive rails.
When designing with this part, prioritize thermal management: the 91 W power rating applies at case temperature, and the DPAK tab must be soldered to a copper pour sized to keep junction temperature below 150 C. For switching applications, keep the gate-drive loop compact to minimize ringing, and add a small gate-source resistor if paralleling multiple devices.
This page synthesizes distributor pricing, drop-in alternatives from Infineon and competitors, and practical design notes that complement the manufacturer datasheet rather than restating it verbatim.
Mga alternatibo na pwedeng ilagay na IRFR540ZTRPBF — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok IRFR540ZTRPBF (parehas na form factor at footprint) — pagkakaiba sa Technology, Package, Operating Junction Temperature, Mounting Type, Drain-Source Voltage (VDS).
IRFR3710ZTRPBF
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →IRFR4510TRPBF
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
IRFR540ZTRLPBF
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AUIRFR540Z
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
VBE1104N
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
IRFB3207ZPBF
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →IRFR540ZTRPBF Mga Pinakamataas na Rating at Electrical Characteristics
| Uri ng Transistor | N-Channel MOSFET |
| Drain-Source Voltage (Vds) | 100 V |
| Continuous Drain Current (Id) | 35 A (at Tc) |
| On-Resistance Rds(on) Max | 28.5 mOhm at Vgs=10V |
| Total Gate Charge (Qg) | 39 nC |
| Power Dissipation (Pd) | 91 W (at Tc) |
| Hanay ng Temperature na Operasyon | -55 C to +175 C (junction) |
| Packhaging | TO-252AA (DPAK) surface mount |
| Technology | IR MOSFET |
| Uri ng Pagpapasok | Surface Mount |
| Bilang ng Pin | 3 (Gate, Drain, Source) |
| Level ng MSL | 1 (unlimited floor life at <30 C / 85% RH) |
| Tindminan RoHS | Compliant |
| Lead-Free / Halogen-Free | Yes / Yes |
| Automotive Qualified | Yes (AEC-Q101) |
Pin Configuration ng IRFR540ZTRPBF
| Pin 1 | GATE — Gate drive input; controls channel conduction |
| Pin 2 | DRAIN — Drain terminal; also connected to metal tab on package back |
| Pin 3 | SOURCE — Source terminal; common return path |
Ligtas na Operating Area (DC, Tj=25C)
Tipikal na mga Gamit
IRFR540ZTRPBF ay nararapat para sa 7 aplikasyons: DC-DC Buck Converter Synchronous Rectifier, 12V/24V Brushed DC Motor Driver Half-Bridge, Battery Protection and Load Switch, Solenoid and Relay Driver, LED Lighting Driver Power Stage, 48V Mild-Hybrid Automotive Auxiliary Systems, Uninterruptible Power Supply (UPS) and Inverter.
DC-DC Buck Converter Synchronous Rectifier
The IRFR540ZTRPBF serves as the low-side synchronous rectifier in 24V-input buck converters delivering 5-20A output. Its 28.5 mOhm Rds(on) at Vgs=10V and 39 nC Qg balance conduction and switching losses for hard-switched topologies at 100-500 kHz. The DPAK tab solders directly to the PCB copper pour, achieving thermal resistance low enough for continuous 10-15A rectifier duty without forced air. Source-connected to the switching node, the device's avalanche-rated body diode handles dead-time conduction. Compared to a Schottky rectifier, the MOSFET reduces rectification loss by 50-70% but requires careful gate-drive timing to prevent shoot-through.
Inirekomenda
12V/24V Brushed DC Motor Driver Half-Bridge
In H-bridge motor drivers for 12V/24V brushed DC motors (window lift, seat adjust, fans, pumps), the IRFR540ZTRPBF's 35A continuous drain current and 100V Vds comfortably handle inrush currents and back-EMF. The avalanche-rated body diode eliminates the need for an external freewheeling diode in most cases. Paired with a complementary gate driver such as the IR2109SPBF, the H-bridge delivers up to ~250W continuous mechanical power per leg. The DPAK package enables direct PCB mounting in space-constrained automotive modules where TO-220 would not fit.
Inirekomenda
Battery Protection and Load Switch
The IRFR540ZTRPBF works as a low-side load switch or reverse-battery protection element in 12V/24V lead-acid and Li-ion battery management systems. The 35A current rating supports main battery disconnect for packs up to ~400W continuous load. Its low Rds(on) of 28.5 mOhm at full Vgs keeps steady-state dissipation below 35W at 35A. AEC-Q101 qualification (in the AUIRFR540Z variant) makes it suitable for automotive battery management modules. A simple gate drive controlled by MCU logic or a dedicated BMS IC enables controlled inrush, soft-start, and over-current shutdown.
Inirekomenda
Solenoid and Relay Driver
Industrial solenoid valves, pneumatic actuators, and electromechanical relays benefit from the IRFR540ZTRPBF's 35A peak handling and 100V avalanche rating. When driving large inductive loads (solenoids store substantial energy), the body diode absorbs back-EMF directly when the MOSFET turns off, eliminating flyback diodes in many circuits. The fast switching enables PWM proportional control at 1-10 kHz for variable-force solenoids. Compatible with 24V industrial control systems and 12V/24V automotive actuators. Pair with a gate driver like the IR2128SPBF for fast turn-off and protected switching.
Inirekomenda
LED Lighting Driver Power Stage
In high-brightness LED drivers for architectural, automotive headlight, and industrial lighting, the IRFR540ZTRPBF operates as the main switching element in constant-current buck or boost converters. Its 100V rating supports 48V LED strings with comfortable margin, and 35A continuous current drives LED arrays up to several hundred watts. The 28.5 mOhm Rds(on) keeps converter efficiency above 95% in well-designed buck topologies. Fast switching (39 nC Qg) enables operation at 100 kHz+ for compact magnetics. The DPAK package handles thermal dissipation in enclosed luminaire housings.
Inirekomenda
48V Mild-Hybrid Automotive Auxiliary Systems
Modern 48V mild-hybrid vehicles require power MOSFETs rated above the 60V class to handle 48V bus transients and load-dump events. The IRFR540ZTRPBF's 100V Vds provides >2x headroom over the 48V nominal bus voltage, meeting automotive electrical transient requirements. Applications include 48V eBoost auxiliary pumps, electric turbo actuators, and DC-DC converters interfacing the 48V bus with 12V subsystems. The AEC-Q101 qualified AUIRFR540Z variant is preferred for these safety-relevant systems. The DPAK package enables compact PCB integration in IP-rated automotive modules.
Inirekomenda
Uninterruptible Power Supply (UPS) and Inverter
In low-power UPS systems and small DC-AC inverters, the IRFR540ZTRPBF switches the low-voltage (24-48V) DC bus into the transformer or filter stage. Its 35A continuous current supports inverter outputs up to ~1 kVA at 24V bus voltage. The fast switching (39 nC Qg) and avalanche-rated body diode suit hard-switched full-bridge inverter topologies operating at 20-50 kHz. The DPAK package's exposed metal tab provides effective heatsinking for the continuous conduction losses typical in inverter designs. The AEC-Q101 qualified variant is used in vehicle inverter systems.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for IRFR540ZTRPBF — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | IRFR3710ZTRPBF | IRFR4510TRPBF | IRFR540ZTRLPBF | AUIRFR540Z | VBE1104N |
|---|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | VBsemi |
| Package | TO-252AA (DPAK) | TO-252AA (DPAK) | TO-252AA (DPAK) | TO-252AA (DPAK) | TO-252AA (DPAK) | TO-252AA (DPAK) |
| Drain-Source Voltage (Vds) | 100 V | 100 V | 100 V | 100 V | 100 V | 100 V |
| Approx. Unit Price (qty 1000) | $0.39 | ~$0.55 | ~$0.60 | ~$0.39 | ~$0.55 | ~$0.20 |
Pangunahing mga Pagkakaiba
- Automotive AEC-Q101 qualification on identical die (kumpara saIRFR540Z (standard grade))
- Lower Rds(on) at same Vds rating (kumpara saIRFR4510TRPBF)
- Lower cost than AEC-Q101-only alternatives (kumpara saAUIRFR540Z (AEC-Q101 only))
Talaan ng Disenyo
The DPAK package's 91 W power dissipation rating applies at case temperature Tc=25 C. In real PCB-mounted designs, the effective power limit is set by Rtheta_JA, which depends on copper-pour area: a 1 square inch 2 oz copper pad achieves ~50 C/W, limiting continuous dissipation to ~3 W before derating. Estimate: at Id=10A and Rds(on)=28.5 mOhm, conduction loss is 2.85 W; at Id=20A it is 11.4 W requiring significant cooling. For 20 A+ designs, use multiple parallel MOSFETs or migrate to D2PAK (TO-263) for lower thermal resistance.
Minimize the gate-drive loop by placing the gate resistor and gate-driver output as physically close to the GATE pin (pin 1) as possible. Keep the high-current loop (DRAIN -> load -> SOURCE -> GND -> back to DRAIN) compact to reduce stray inductance and switching ringing. The DPAK's exposed metal tab (drain) must be soldered to a copper pour sized for the application's thermal dissipation; vias under the tab to internal ground/power planes further reduce thermal resistance. Add a small gate-source resistor (10-100 kOhm) to prevent accidental turn-on from dv/dt-induced gate charge.
Estimated gate-drive requirement: at Qg=39 nC and a target switching time of 50 ns, peak gate current = Qg/t = 0.78 A, which a standard CMOS gate driver cannot source. Use a dedicated gate driver (TC4420/TC4429 for low-side; IR2109SPBF/IR2110SPBF for half-bridge). Exceeding Vgs(max) of +/-20 V destroys the gate oxide; use a 12V Zener clamp or gate-drive voltage regulator. For inductive loads (motors, solenoids, transformers), the intrinsic body diode handles back-EMF in most cases but verify avalanche energy (EAS) against worst-case stored energy.
At switching frequencies above 100 kHz, the DPAK package's lead inductance (~5 nH source lead) causes significant drain-voltage ringing during hard switching. Snubber circuits (RC or RCD across drain-source) reduce ringing and EMI but dissipate additional power. For lowest ringing, select gate-drive resistors that slow switching edges to ~50-100 ns. The body diode's reverse-recovery charge (Qrr) adds switching loss in synchronous-rectifier applications; consider Schottky diode paralleling for highest-efficiency designs above 200 kHz.
Impormasyon ng Pagsunod sa Kautusan
AEC-Q101 (automotive MOSFET grade) qualified per Infineon datasheet. RoHS and REACH compliant per product page. Lead-free / Halogen-free per PBF suffix. Conflict-minerals status available via Infineon product compliance declarations.
