Analog Devices

LT1057ISW - Dual 14V/us Precision JFET Op Amp | Analog Devices

MPN: LT1057ISW ✓ Nakahanda
150 uV typical; 450 uV maximum Vdss 10 pA Id 8-pin SOIC Package
MOQ: 1 |

LT1057ISW Ulas

The Analog Devices LT1057ISW is a matched dual JFET-input precision operational amplifier with a typical slew rate of 14 V/us, a minimum gain-bandwidth product of 5 MHz, and low input bias current of 10 pA, housed in an 8-pin SOIC package. The matched dual architecture provides two amplifiers with closely matched characteristics for instrumentation, precision signal processing, and high-speed analog control.

A JFET-input operational amplifier is a voltage-amplifier IC whose input stage uses junction field-effect transistors. This input architecture is valued for high input impedance, very low bias current, and low input-current noise. Within the broader semiconductor hierarchy, the LT1057 is an operational amplifier, a precision analog amplifier, and a linear integrated circuit intended for signal conditioning rather than power conversion.

The LT1057 combines a 14 V/us typical slew rate with a minimum 5 MHz gain-bandwidth product. Its fast settling performance reaches 0.02%, making it useful where signal transitions must settle accurately at relatively high operating frequencies. The typical input offset voltage is 150 uV, with a maximum of 450 uV for the LT1057, while the low 10 pA bias current supports high-impedance sensing and minimizes current-dependent errors.

The matched dual configuration supports precision applications requiring two amplifier channels with similar behavior. It can serve as a dual noninverting amplifier, dual difference amplifier, instrumentation front end, sample-and-hold buffer, or active-filter building block. The 8-pin configuration supports common industry-standard dual-op-amp layouts, reducing design changes when moving from older bipolar or JFET-input dual amplifiers to the LT1057 family.

Typical uses include precision instrumentation, low-level signal conditioning, high-impedance sensor interfaces, active filters, and analog measurement systems. The low bias current is especially beneficial when source impedances are high, while the 14 V/us typical slew rate helps preserve signal integrity when driving moderate capacitances or processing faster waveforms.

When laying out a circuit, place input and feedback components close to the relevant amplifier pins and keep sensitive input traces away from high-current switching paths. Provide stable bypassing at the power pins, verify output-current and supply-voltage limits against the manufacturer specifications, and check stability when driving capacitive loads.

This product page combines the LT1057 family specifications, manufacturer documentation, package information, cross-reference candidates, and practical guidance for evaluating the LT1057ISW in precision analog systems.

Mga alternatibo na pwedeng ilagay na LT1057ISW — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

LT1057CSW

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin SOIC
Same 14 V/us typical slew rate, 5 MHz minimum gain-bandwidth product, and 150 uV typical offset; ordering-code temperature-grade difference remains to be confirmed.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1057IS

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin SOIC
Same 14 V/us typical slew rate and 5 MHz minimum gain-bandwidth product; narrow-versus-wide SOIC lead geometry must be checked before PCB reuse.

📋 Alternatibo na Reference (hindi sa katalogo)

LF412A

✅ Drop-In
📦 8-pin SOIC
The LT1057 provides a 14 V/us typical slew rate and 150 uV typical offset, while the LF412A comparison values require confirmation before substitution.

📋 Alternatibo na Reference (hindi sa katalogo)

OP-215

✅ Drop-In
📦 8-pin SOIC
The LT1057 provides a 14 V/us typical slew rate and 150 uV typical offset, while the OP-215 comparison values require confirmation before substitution.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1057ISW Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Dual precision operational amplifier
Input Transistor Type JFET
Number of Amplifiers 2 circuits
Slew Rate 14 V/us typical; 10 V/us minimum
Gain-Bandwidth Product 5 MHz minimum
Input Offset Voltage 150 uV typical; 450 uV maximum
Input Bias Current 10 pA
Settling Performance 0.02% fast settling time
Channel Matching Matched dual amplifier
Operating Temperature Grade Industrial
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount

Pin Configuration ng LT1057ISW

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUT A — Channel A output
Pin 2 -IN A — Channel A inverting input
Pin 3 +IN A — Channel A non-inverting input
Pin 4 V- — Negative power supply
Pin 5 +IN B — Channel B non-inverting input
Pin 6 -IN B — Channel B inverting input
Pin 7 OUT B — Channel B output
Pin 8 V+ — Positive power supply

Tipikal na mga Gamit

LT1057ISW ay nararapat para sa 6 aplikasyons: Precision Instrumentation Front End, High-Impedance Sensor Signal Conditioning, Active Audio and Control Filters, Low-Level Measurement Amplifier, High-Speed Analog Signal Conditioning, Sample-and-Hold Buffer Stage.

🔧

Precision Instrumentation Front End

The LT1057ISW fits precision instrumentation because its JFET input stage has a 10 pA bias current and its typical input offset voltage is 150 uV, helping limit errors in low-level sensor signals. The two matched channels can support differential signal conditioning without introducing substantial channel mismatch. With a minimum gain-bandwidth product of 5 MHz and a 14 V/us typical slew rate, the amplifier also retains useful bandwidth and transient performance. Place the amplifier close to the sensing network, keep input traces short, and verify the required gain and common-mode range against the application limits.

🧩

High-Impedance Sensor Signal Conditioning

The LT1057ISW is well suited to high-impedance sensor interfaces because its specified 10 pA input bias current minimizes the error produced when bias current flows through a large source resistance. Its 150 uV typical offset voltage supports accurate amplification of small transducer outputs, while the 5 MHz minimum gain-bandwidth product provides more bandwidth than a purely low-frequency precision amplifier may require. The dual channels can condition complementary sensor outputs or provide gain and filtering functions. PCB insulation, guarded input routing, and clean grounding remain important because high-impedance nodes can collect leakage and stray interference.

🎧

Active Audio and Control Filters

The LT1057ISW can implement active filtering in audio and control systems where both low input current and fast transient response are valuable. Its 14 V/us typical slew rate and 10 V/us minimum slew rate provide ample large-signal response for moderate filter frequencies, while the 5 MHz minimum gain-bandwidth product supports accurate closed-loop behavior above the audio band. The matched dual architecture permits two filter sections with similar AC characteristics. Component tolerances and amplifier gain accuracy should be calculated together, and output loading must remain within the device's operating limits.

📡

Low-Level Measurement Amplifier

The LT1057ISW suits low-level measurement stages that combine high source impedance with accurate signal representation. The 10 pA input bias current reduces the voltage offset caused by source resistance, and the 150 uV typical input offset voltage limits additional signal error. Two amplifiers can form a precision difference stage when component matching and resistor-network accuracy are adequate. The 5 MHz minimum gain-bandwidth product helps preserve signal shape, while the 14 V/us typical slew rate improves response to fast input transitions. Input common-mode and output swing limits must be checked before finalizing the gain plan.

📱

High-Speed Analog Signal Conditioning

The LT1057ISW is appropriate for moderate-speed analog conditioning because its minimum 5 MHz gain-bandwidth product and 14 V/us typical slew rate provide faster response than a general-purpose precision amplifier may offer. Its JFET inputs also preserve low input bias current, allowing the same device to condition relatively high-impedance sources. The amplifier can be used in gain, inversion, impedance conversion, or active-filter stages. Pay attention to settling behavior for small-signal measurements and add isolation when driving capacitive loads that could otherwise create excessive output current or instability.

🖥️

Sample-and-Hold Buffer Stage

The LT1057ISW can form a sample-and-hold buffer using one channel for acquisition and the other for complementary processing. Its low 10 pA input bias current reduces the disturbance imposed on the signal source, and its 14 V/us typical slew rate helps the output follow changing input levels. The minimum 5 MHz gain-bandwidth product supports closed-loop bandwidth required by the sampling interval. The exact hold capacitor, switch arrangement, and settling target require a detailed stability and error analysis, while supply bypassing should be positioned close to the amplifier pins.

Buod ng mga Inirekomendang Produkto

LT1057IS Same dual JFET-input amplifier family Ginagamit sa: Precision Instrumentation Front End, High-Impedance Sensor Signal Conditioning, Low-Level Measurement Amplifier, Sample-and-Hold Buffer Stage OP-215 Dual precision amplifier reference Ginagamit sa: Precision Instrumentation Front End, Active Audio and Control Filters, High-Speed Analog Signal Conditioning, Sample-and-Hold Buffer Stage LF412A JFET-input instrumentation amplifier alternative Ginagamit sa: High-Impedance Sensor Signal Conditioning, Low-Level Measurement Amplifier LT1057CSW Same-family dual amplifier option Ginagamit sa: Active Audio and Control Filters, High-Speed Analog Signal Conditioning
Where to buy LT1057ISW online?
Use the Request a Quote form on this page to request LT1057ISW availability, order quantities, and current commercial terms. The component is an Analog Devices dual JFET-input precision operational amplifier in an 8-pin SOIC package, so quote requests should identify the exact LT1057ISW MPN and required delivery quantity.
What is the price of LT1057ISW?
Submit the LT1057ISW MPN and required quantity through the Request a Quote form on this page. The LT1057ISW is offered as an 8-pin SOIC dual JFET-input operational amplifier with a typical 14 V/us slew rate and a minimum 5 MHz gain-bandwidth product, allowing the distributor to confirm current commercial terms without stale pricing.
What is the lead time for LT1057ISW?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can depend on the order quantity, package form, and manufacturing availability, so provide the required quantity and target delivery date when requesting a quotation for the LT1057ISW.
Is LT1057ISW in stock?
The Request a Quote form on this page is the appropriate channel for checking current LT1057ISW stock and allocation. The part is an Analog Devices dual JFET-input precision operational amplifier in an 8-pin SOIC package, and a written quotation can confirm available inventory, lead time, and the exact LT1057ISW ordering code.
LT1057ISW vs LF412A - which is better for precision instrumentation?
The LT1057ISW is generally the better choice when priority is placed on speed and precision because the manufacturer identifies it as an upgrade for systems using the LF412A. According to the Analog Devices LT1057 datasheet, the LT1057 provides a 14 V/us typical slew rate, a minimum 5 MHz gain-bandwidth product, and 150 uV typical input offset voltage.
What is the difference between LT1057ISW and OP-215?
The LT1057ISW is a matched dual JFET-input precision amplifier intended to upgrade systems using the OP-215 and other established bipolar or JFET-input duals. The manufacturer highlights a 14 V/us typical slew rate, 10 V/us minimum slew rate, 5 MHz minimum gain-bandwidth product, and 150 uV typical offset for the LT1057.
When should I choose LT1057ISW over LF412A?
Choose LT1057ISW when the design benefits from the manufacturer's stated LT1057 upgrades over LF412A systems, especially higher slew rate and tighter offset performance. The LT1057 offers a 14 V/us typical slew rate and 150 uV typical input offset voltage while retaining the industry-standard 8-pin dual-amplifier configuration.
Is LT1057ISW suitable for high-impedance sensor interfaces?
Yes, the LT1057ISW is suitable for high-impedance sensor interfaces because its JFET input stage has a specified 10 pA input bias current. That low bias current limits the voltage error created when current flows through a high source resistance, while the minimum 5 MHz gain-bandwidth product supports useful signal bandwidth.
What can replace LT1057ISW?
The LT1057ISW can be replaced only after confirming package geometry, pin functions, electrical limits, temperature grade, and required accuracy. The LF412A and OP-215 are identified by Analog Devices as families upgraded by the LT1057, while LT1057 grade and packaging variants can provide closer alternatives when their ordering codes are verified.
Is LT1057ISW the same as LT1057CSW?
The LT1057ISW and LT1057CSW are closely related dual LT1057-family amplifiers, but the final ordering code determines temperature grade and commercial ordering configuration. Both use the same core family architecture; verify the complete MPN suffix, package drawing, temperature rating, and operating limits before treating one as a drop-in replacement for the other.
Where to download the LT1057ISW datasheet PDF?
Download the official LT1057 family datasheet from the Analog Devices technical-documentation link listed on this page. The document covers the LT1057 matched JFET-input dual operational amplifier and reports key characteristics including 14 V/us typical slew rate, 10 V/us minimum slew rate, 5 MHz minimum gain-bandwidth product, and 150 uV typical offset voltage.
Where can I find the LT1057ISW pinout?
Use the pin configuration and package drawings in the official Analog Devices LT1057 family datasheet. The LT1057 uses an 8-pin dual-op-amp arrangement: channel A output, channel A inverting input, channel A non-inverting input, negative supply, channel B non-inverting input, channel B inverting input, channel B output, and positive supply.
What are the key specifications of LT1057ISW that engineers should know?
The LT1057ISW is a matched dual JFET-input precision op amp with a 14 V/us typical slew rate, 10 V/us minimum slew rate, 5 MHz minimum gain-bandwidth product, 150 uV typical offset voltage, 450 uV maximum offset voltage, and 10 pA input bias current. It uses an 8-pin SOIC package for surface-mounted dual-amplifier designs.
What is the best LF412A equivalent for LT1057ISW?
The LT1057ISW itself is the relevant upgrade path for systems previously using an LF412A because Analog Devices explicitly identifies the LT1057 as an upgrade to LF412A applications. The LT1057 retains the standard 8-pin dual-op-amp arrangement while specifying a 14 V/us typical slew rate and 150 uV typical input offset voltage.
How should LT1057ISW be bypassed on a PCB?
Place the required power-supply bypass capacitors close to the positive and negative supply pins, using the manufacturer application guidance for capacitor selection. Keep the input and feedback paths short, route sensitive input nodes away from switching-current paths, and account for the LT1057's 14 V/us slew rate when driving capacitive loads.

Impormasyon ng Talumpati sa Engineering for LT1057ISW — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the LT1057ISW when a design needs a dual JFET-input amplifier with low 10 pA input bias current, 150 uV typical offset voltage, a 5 MHz minimum gain-bandwidth product, and 14 V/us typical slew rate. It is especially suitable for high-impedance instrumentation and precision measurement stages where input-current error must remain small. Choose LT1057CSW when the commercial-grade ordering option meets the product requirements and its exact package and temperature suffix are confirmed. Choose LT1057IS when the narrower SOIC lead geometry matches the PCB and the ordering-code differences are acceptable. LF412A and OP-215 can be evaluated for existing designs, but the LT1057 offers the manufacturer's stated upgrade in speed and precision. Confirm supply limits, common-mode range, output swing, load stability, package drawing, and temperature grade before approving any substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LT1057CSW LT1057IS LF412A OP-215
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Analog Devices Analog Devices Analog Devices Texas Instruments Analog Devices
Amplifier Configuration Matched dual Dual Dual Dual Dual

Pangunahing mga Pagkakaiba

  • Fast slew rate within a precision JFET-input dual amplifier (kumpara saOP-215)
  • Manufacturer-identified upgrade path for LF412A systems (kumpara saLF412A)
  • Matched dual-channel architecture (kumpara saLT1057IS)

Talaan ng Disenyo

Place each input, feedback, and supply-bypass component close to its associated LT1057ISW pin. Sensitive non-inverting inputs should have short traces and a grounded guard where practical. Because the JFET input bias current is specified at 10 pA, long PCB leakage paths and contaminated surfaces can become significant at very high source impedances.

Do not treat nominal offset voltage as the total error budget. Include resistor tolerance, input bias-current error, noise, output loading, and temperature effects in the calculation. With a 150 uV typical input offset and 10 pA input bias current, source resistance and resistor-network errors can become comparable to the amplifier offset in precision measurement circuits.

Use the 14 V/us typical slew rate and 10 V/us minimum slew rate as design limits when driving capacitive or long interconnects. Estimate output-current demand from capacitive load and slew rate, then verify stability with an isolation resistor if the load is highly capacitive. Maintain short output paths and provide local supply bypassing to reduce transient disturbance.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The available product documentation identifies an industrial-grade dual JFET-input operational amplifier but does not establish the target MPN's RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

Kaugnay na Hanapin

LT1057ISW datasheet LT1057ISW datasheet pdf LT1057ISW pinout LT1057ISW specifications LT1057ISW equivalent LT1057ISW replacement LT1057ISW cross reference LT1057ISW vs LF412A LT1057ISW vs OP-215 Analog Devices LT1057ISW LT1057 dual JFET op amp LT1057ISW price LT1057ISW stock LT1057ISW footprint LT1057ISW application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices Linear Technology LT1057ISW LT1057 LT1057CSW LT1057IS OP-215 LF412A dual operational amplifier precision operational amplifier JFET-input amplifier linear integrated circuit semiconductor gain-bandwidth product slew rate input bias current input offset voltage common-mode voltage range instrumentation amplifier active filter high-impedance sensor interface 8-pin SOIC SOIC family surface-mount package RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ