Microchip Technology

MCP3302T-BI/SL - 13-Bit Dual-Channel ADC | Microchip

MPN: MCP3302T-BI/SL ✓ Nakahanda
4.5 V to 5.5 V Vdss 14-pin SOIC Package
MOQ: 1 |

MCP3302T-BI/SL Ulas

The Microchip Technology MCP3302T-BI/SL is a 13-bit, dual-channel successive-approximation analog-to-digital converter with four differential or single-ended inputs, a 100 kSPS conversion rate, and an SPI serial interface in a 14-pin SOIC package. It operates from a 4.5 V to 5.5 V supply, making it suitable for precision industrial instrumentation, sensor acquisition, and low-power embedded measurement systems.

An ADC is a semiconductor that converts an analog voltage into a digital number for processing by a microcontroller or other digital system. The MCP3302 belongs to the successive-approximation ADC hierarchy, which uses an internal sample-and-hold circuit, comparator, and successive conversion process. Its differential inputs support measurement of voltage differences, while the SPI interface allows a host processor to retrieve conversion results through a compact, serial connection.

Key features include 13-bit resolution, two simultaneous-looking analog input channels, four selectable analog inputs, 100 kSPS sampling performance, and a 4.5 V to 5.5 V analog supply range. The four-input architecture allows two channels to be configured as differential inputs or as four single-ended channels. This flexibility supports bridge sensors, ratiometric measurements, potentiometer sensing, and multiple analog signals sharing one converter.

The MCP3302 uses a serial peripheral interface compatible with the industry-standard SPI framing used by Microchip's related MCP3301 family. A microcontroller can issue a conversion command, wait for the indicated conversion interval, and read the 13-bit result through the serial data and clock lines. Differential operation reduces common-mode sensitivity when the measured signal is small relative to the voltage referenced by the converter.

Typical applications include industrial process-control modules, battery-powered remote sensors, laboratory measurement equipment, environmental monitors, and compact control boards. The low-power operating environment and small SOIC footprint are useful where board area and energy use are constrained. Designers should also account for analog-reference quality, input settling time, source impedance, and PCB layout when establishing conversion accuracy.

For reliable operation, bypass the analog supply close to the device and route analog and digital return currents separately. Reference and signal traces should remain short, with analog ground arranged to minimize voltage drops caused by digital output currents. Input-driver settling must be checked against the converter's sampling network, especially when multiplexed sensors have high output impedance.

This product page combines the manufacturer specifications, verified distributor listings, package information, replacement analysis, and application-focused engineering guidance. It also distinguishes a true pin-compatible alternative from broader functional ADC options, helping designers evaluate PCB reuse, interface continuity, resolution, conversion rate, and supply requirements before approving a substitution.

Mga alternatibo na pwedeng ilagay na MCP3302T-BI/SL — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MCP3302T-BI/SL (parehas na form factor at footprint) — pagkakaiba sa Input Type.

Microchip Technology
Input Type: Fully differential

MCP3302-BI/SL

✅ Drop-In
Microchip Technology
📦 14-pin SOIC
13 bit · 2 channels · 4 channels · 1 SAR converter · Fully differential · SPI serial interface · 14-pin SOIC · Surface mount

Magkontak para sa presyo

Tingnan ang Datasheet →

MCP3302T-BI/SL Mga Pinakamataas na Rating at Electrical Characteristics

Pangangasiwaan 13 bit
Converter Type Successive-approximation (SAR) ADC
Number of Channels 2 channels
Input Configuration 4 differential or single-ended inputs
Input Type Differential and single-ended
Rate ng Pagkupita 100 kSPS
Supply Voltage Range 4.5 V to 5.5 V
Digital Interface SPI serial interface
Packhaging 14-pin SOIC
Uri ng Pagpapasok Surface mount
Bilang ng Pins 14 pins
Output Code 13-bit ADC result

Gabay sa Pin Configuration ng MCP3302T-BI/SL 14-pin soic

Pin configuration para sa MCP3302T-BI/SL (14-pin soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 14-pin soic package para sa MCP3302T-BI/SL

Wala ng detalyadong pinout data na magagamit para sa MCP3302T-BI/SL.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MCP3302T-BI/SL ay nararapat para sa 6 aplikasyons: Industrial Process Measurement, Battery-Powered Remote Sensor Nodes, Environmental Monitoring, Laboratory Instrumentation, Battery Charger and Power-System Monitoring, Precision Digital Potentiometer Readback.

🏭

Industrial Process Measurement

The MCP3302T-BI/SL fits industrial process-control modules that monitor pressure, temperature, flow, or level signals with a 4.5 V to 5.5 V supply. Its 13-bit resolution and 100 kSPS rate support responsive conversion of slowly changing process variables, while differential inputs help reject common-mode voltage present on long sensor wiring. The 14-pin SOIC package also keeps the converter compact for multi-channel controller boards. Designers should use the differential configuration when the sensor output is centered around a nonzero reference voltage and should verify input range, settling behavior, and isolation requirements at the connector.

🧩

Battery-Powered Remote Sensor Nodes

The MCP3302T-BI/SL is appropriate for battery-powered remote sensor nodes where analog measurements must be captured without a continuous high-power conversion load. Microchip positions the MCP3302 family for battery-operated systems, and the 100 kSPS conversion rate supports periodic sensing as well as moderate-rate monitoring. Two channels and four selectable inputs allow a node to combine two differential measurements or monitor four single-ended sensors. Duty-cycling the converter and placing it on a switched low-power rail can reduce average energy use, provided the host controller and sensor drivers preserve the required acquisition timing.

🧩

Environmental Monitoring

The MCP3302T-BI/SL can digitize outputs from temperature, humidity, gas, and soil-moisture sensors in compact environmental monitoring equipment. The 13-bit result format provides useful resolution for slow-changing environmental variables, and the selectable differential or single-ended input architecture simplifies boards that mix ratiometric and grounded sensor outputs. At 100 kSPS, the converter is considerably faster than typical environmental sensing needs, allowing the firmware to group multiple channels into one acquisition cycle. Input protection, filtering, and sensor excitation noise should be evaluated separately from ADC resolution.

🔧

Laboratory Instrumentation

The MCP3302T-BI/SL suits compact laboratory instruments that need accurate, repeatable capture of low-level analog measurements. Its 13-bit resolution and differential-input capability are useful for amplifier outputs, potentiometers, bridge sensors, and calibrated reference voltages, while the 100 kSPS rate supports faster sweeps than many conventional panel meters require. The SPI interface allows a microcontroller to perform control functions and communicate results to a host computer. For precision measurement, engineers should evaluate the reference implementation, input leakage, noise performance, and printed-board cleanliness rather than relying on nominal resolution alone.

⚡

Battery Charger and Power-System Monitoring

The MCP3302T-BI/SL can monitor voltages in battery-management and power-conversion systems where the designer needs a compact secondary measurement channel. The 4.5 V to 5.5 V operating range is suitable for systems with a regulated 5 V control rail, and the converter can observe individual cell or divider-derived voltages when those signals remain within the permitted input range. Differential operation supports measurements referenced to a nonzero midpoint, while the 13-bit resolution provides useful visibility into gradual changes. Protection, scaling, and isolation should be added as appropriate because the ADC is not a standalone high-voltage measurement front end.

🔧

Precision Digital Potentiometer Readback

The MCP3302T-BI/SL can read back the wiper voltage of a digital potentiometer when system designers require confirmation of an analog setting. Two ADC channels allow one channel to measure a potentiometer position while the other monitors a reference or calibration point, and the 100 kSPS rate supports faster closed-loop adjustment than many slow user-interface systems require. Differential input operation can reduce sensitivity to common-mode supply variation when the wiper voltage is referenced to one end of the network. Input impedance, settling time, and the source resistance of the potentiometer must be checked against the acquisition network.

What is the MCP3302T-BI/SL?
The MCP3302T-BI/SL is a 13-bit, dual-channel successive-approximation ADC with four differential or single-ended inputs, a 100 kSPS sampling rate, and an SPI interface in a 14-pin SOIC package. According to the Microchip MCP3302 product page, the device combines full differential inputs with low power consumption for battery-powered systems and remote data-acquisition equipment.
What is the sampling rate of MCP3302T-BI/SL?
The MCP3302T-BI/SL supports a maximum sampling rate of 100 kSPS. According to the Microchip MCP3302 family documentation, this rate is suitable for continuously monitoring analog sensors while keeping the serial conversion command and result-read sequence compatible with a standard SPI host controller.
How many ADC channels and inputs does MCP3302T-BI/SL have?
The MCP3302T-BI/SL provides two ADC channels with a selectable arrangement of four analog inputs. Microchip describes the device as a 13-bit ADC with two channels and four differential or single-ended inputs, allowing the same converter to support two differential measurements or four single-ended measurements.
What is the voltage range of MCP3302T-BI/SL?
The MCP3302T-BI/SL operates from a 4.5 V to 5.5 V supply. The verified Microchip and distributor product descriptions identify this supply range, but the exact allowable analog input voltage, reference voltage, and absolute maximum ratings must be confirmed in the manufacturer datasheet before applying signals outside the application's common-mode range.
Does MCP3302T-BI/SL use SPI?
Yes, the MCP3302T-BI/SL uses an SPI serial interface to receive conversion commands and return 13-bit results. Microchip identifies the interface as industry-standard SPI, which allows the converter to share serial bus connections with a suitable host microcontroller while using dedicated chip-select signaling for device selection.
Where can I download the MCP3302T-BI/SL datasheet?
The official MCP3302 datasheet and product resources are accessible through the Microchip MCP3302 product page linked on this listing. The manufacturer documentation contains the authoritative pin descriptions, electrical characteristics, timing diagrams, input-equivalent circuits, and recommended application layouts needed for PCB implementation.
Where can I find the MCP3302T-BI/SL pinout?
The MCP3302T-BI/SL pinout is shown in the manufacturer datasheet's pin-configuration diagram for the 14-pin SOIC package. Use that diagram when assigning power, ground, analog inputs, reference connections, and SPI signals, and consult the pin-description table before assigning any dual-function or no-connect positions.
What can replace MCP3302T-BI/SL?
The directly documented replacement is MCP3302-BI/SL, which retains the MCP3302 function and 14-pin SOIC footprint while differing in shipment form rather than electrical operation. Verify the manufacturer pin configuration, temperature grade, reference arrangement, and available stock form before approving it for an existing design.
Is MCP3302T-BI/SL the same as MCP3302-BI/SL?
The MCP3302T-BI/SL and MCP3302-BI/SL share the MCP3302 device family and 14-pin SOIC electrical configuration; the principal visible distinction is the orderable shipment form associated with the T suffix. Confirm the suffix-specific packing and temperature information in the manufacturer ordering information before treating them as exact production substitutes.
Is MCP3302T-BI/SL suitable for battery-powered sensor acquisition?
The MCP3302T-BI/SL is suitable for many battery-powered acquisition systems because Microchip identifies the MCP3302 family as a low-power converter for battery-operated and remote data-acquisition applications. The 100 kSPS rate supports responsive sensor monitoring, while duty-cycled conversions and sleep behavior can reduce average system energy use.
MCP3302T-BI/SL vs MCP3301T-BI/SN - which is better for a four-channel sensor board?
The MCP3302T-BI/SL is the stronger choice when the design requires differential-input capability within the MCP3302 family's 13-bit architecture. The MCP3301T-BI/SN belongs to the closely related MCP3301 family, so its channel count, input arrangement, timing, and pin mapping must be compared with the target board before considering it as a replacement.
When should I choose MCP3302T-BI/SL over another 13-bit ADC?
Choose the MCP3302T-BI/SL when the design needs two ADC channels, four differential or single-ended inputs, a 100 kSPS conversion rate, and SPI communication in a 14-pin SOIC package. Select another converter only when it matches the required input topology, reference voltage, absolute accuracy, interface timing, package, and qualification criteria.
What are the key specifications of MCP3302T-BI/SL that engineers should know?
The principal specifications are 13-bit resolution, 100 kSPS conversion performance, two ADC channels, four selectable differential or single-ended inputs, a 4.5 V to 5.5 V supply range, an SPI interface, and a 14-pin SOIC package. These characteristics place the device in the low-power precision ADC category for embedded and industrial measurement.
How should I design the PCB around MCP3302T-BI/SL?
Place analog bypass capacitors close to the supply and ground pins, keep analog and digital return paths separated, and minimize the distance from the source to the analog input pins. Reference and signal routing should be short and quiet, and input-driver settling must be verified with the manufacturer's sampling circuit and acquisition timing.
Where to buy MCP3302T-BI/SL online?
Use the Request a Quote form on this page to request MCP3302T-BI/SL availability, order quantities, and current lead time. The request can specify the desired shipment form, quantity, and target delivery schedule, allowing the supply chain to confirm the exact suffix and production status before an order is placed.
What is the price of MCP3302T-BI/SL?
Use the Request a Quote form on this page for the current commercial terms of MCP3302T-BI/SL. Pricing depends on quantity, shipment form, market conditions, and current inventory, so the form is the appropriate route for a quote tied to the exact orderable MPN rather than a potentially stale market figure.
Is MCP3302T-BI/SL in stock and what is its lead time?
Request current MCP3302T-BI/SL stock and lead-time confirmation through the Request a Quote form on this page. Include the required quantity, target shipment form, production schedule, and delivery location so supply can distinguish the exact T-BI/SL order code from related MCP3302 variants.

Impormasyon ng Talumpati sa Engineering for MCP3302T-BI/SL — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MCP3302T-BI/SL when the design requires a 13-bit SAR ADC with two channels, four selectable differential or single-ended inputs, 100 kSPS conversion performance, SPI communication, and a 4.5 V to 5.5 V supply in a 14-pin SOIC package. It is particularly suitable for battery-powered remote sensing, industrial process measurement, environmental monitoring, and compact instrumentation where differential measurements and a compact footprint are important. MCP3302-BI/SL is the directly documented same-family alternative when its suffix-specific shipment form and production conditions are acceptable; verify the ordering information before substitution. A related MCP3301-family device should be selected only after confirming that its channel configuration, input multiplexing, timing, reference arrangement, and pin mapping satisfy the PCB and firmware requirements. Do not substitute a converter merely because it also offers an SPI interface and similar resolution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MCP3302-BI/SL
Package 14-pin SOIC 14-pin SOIC
Brand Microchip Technology Microchip Technology
Resolution 13 bit 13 bit
Converter Architecture Successive-approximation (SAR) Successive-approximation (SAR)
Sampling Rate 100 kSPS 100 kSPS
ADC Channels 2 channels 2 channels
Input Arrangement 4 differential or single-ended inputs 4 differential or single-ended inputs
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V
Serial Interface SPI SPI
Orderable Configuration Difference T-BI/SL tape-and-reel order code BI/SL order code; tube packing is identified in the family listing

Pangunahing mga Pagkakaiba

  • Direct PCB reuse within the MCP3302 family (kumpara saMCP3302-BI/SL)
  • Supports differential and single-ended measurement configurations (kumpara saMCP3302-BI/SL)
  • Combines 13-bit resolution with a 100 kSPS conversion rate (kumpara saMCP3302-BI/SL)

Talaan ng Disenyo

Place the analog bypass capacitor directly beside the analog supply and ground pins, and keep the connection loop as small as practical. Route analog inputs away from SPI clock and data traces. Use a continuous ground plane where possible, but partition analog return paths so digital output currents do not flow beneath the reference, input, or converter area. Follow the layout shown in the manufacturer's datasheet because the internal sampling capacitor makes trace length and return-current control part of the acquisition accuracy.

Verify that each source settles to the required accuracy within the converter's acquisition interval. High-impedance sensors, long traces, protection diodes, and filtering networks can introduce leakage or settle more slowly than a low-impedance divider. Evaluate the complete source impedance and capacitance rather than checking only the sensor's nominal resistance. For differential measurements, both input branches should have similar impedance and timing so their difference does not continue changing during sampling.

Keep the 4.5 V to 5.5 V analog supply within its specified operating range and provide local high-frequency decoupling close to the device. Reference quality directly affects the conversion scale, so the reference path should avoid digital-current coupling and excessive trace resistance. If the reference is external, confirm its startup, stability, and noise behavior against the acquisition sequence. For battery systems, sequence the ADC supply and reference to prevent an unstable rail from corrupting measurements.

Do not treat the 13-bit conversion code as 13 bits of guaranteed absolute accuracy; offset error, gain error, nonlinearity, reference error, and noise can reduce real-world measurement precision. Use the manufacturer timing diagrams to determine when the result is valid after asserting the sample command. Avoid changing the input multiplexer immediately before conversion without allowing the prior conversion to finish and the new source to settle.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The exact suffix-specific environmental, material, and qualification declarations were not identified in the manufacturer product-page text or distributor listings. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the current Microchip product documentation and declarations for MCP3302T-BI/SL.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MCP3302T-BI/SL datasheet MCP3302T-BI/SL pinout MCP3302T-BI/SL datasheet pdf MCP3302T-BI/SL equivalent MCP3302T-BI/SL replacement MCP3302T-BI/SL price MCP3302T-BI/SL stock MCP3302T-BI/SL SPI ADC MCP3302T-BI/SL 100 kSPS MCP3302T-BI/SL SOIC-14 MCP3302T-BI/SL sensor acquisition MCP3302T-BI/SL vs MCP3302-BI/SL Microchip MCP3302T-BI/SL MCP3302 14-pin SOIC ADC MCP3302 differential input ADC

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology MCP3302T-BI/SL MCP3302-BI/SL MCP3301T-BI/SN MCP3301T-BI/MS 13-bit ADC successive-approximation ADC SAR analog-to-digital converter data converter semiconductor SPI Serial Peripheral Interface differential input single-ended input 14-pin SOIC SOIC package family surface-mount package SMD 100 kSPS 4.5 V to 5.5 V supply industrial process control battery-powered systems remote data acquisition
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ