PIC18F65K80-I/MR - 8-bit MCU, 32KB Flash, ECAN, 64-VQFN | Microchip
MPN: PIC18F65K80-I/MR ✓ NakahandaPIC18F65K80-I/MR Ulas
An 8-bit microcontroller (MCU) is a self-contained computing element that integrates a CPU, non-volatile program memory, volatile data memory, and configurable peripherals on a single silicon die. Within the broader hierarchy, the PIC18F65K80 belongs to the 8-bit MCU class -> PIC18 family -> PIC18F K-series sub-family -> Microcontroller IC category -> Embedded semiconductor. The 'K80' suffix denotes the ECAN-enabled, XLP low-power variant; the '65' pin-count designator selects the 64-pin package family.
Key features include an integrated ECAN module with six programmable receive/transmit buffers and three dedicated transmit buffers, a 12-bit ADC (up to 12 channels depending on package), a CTMU (Charge Time Measurement Unit) for capacitive touch and precise time measurement, nanoWatt XLP sleep currents below 100 nA typical, and multiple serial interfaces (UART, SPI, I2C) suitable for sensor and actuator nodes. The integrated ECAN eliminates the need for an external CAN transceiver controller in node applications.
The device uses a Harvard-architecture enhanced RISC core with 16-bit opcodes fetched from 32 KB Flash, dual-pointer indirect addressing, and a hardware multiplier. It supports in-circuit serial programming (ICSP) and in-circuit debugging (ICD) via Microchip's MPLAB X IDE with PICKit or ICD debug probes.
Typical applications include automotive body and gateway ECUs, building automation controllers, elevator control systems, industrial CAN nodes, sensor hubs, and any 1.8-5.5 V embedded design requiring ECAN connectivity with low standby current. When designing with this MCU, plan for a stable VDD decoupling network (1x 100 nF + 1x 10 µF per VDD pin pair) and connect the exposed thermal pad to the ground plane to meet the package's thermal performance. The CTMU peripheral requires a current source calibration step for accurate capacitive measurements.
This page synthesizes verified distributor pricing, drop-in package alternatives from the same PIC18 K-series family, and practical design notes that are not consolidated in the Microchip datasheet alone, giving procurement and firmware engineers a single reference for sourcing decisions.
Mga alternatibo na pwedeng ilagay na PIC18F65K80-I/MR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC18F65K80-I/MR (parehas na form factor at footprint) — pagkakaiba sa Package, ADC, Core Architecture, Operating Temperature, Mounting Type.
PIC18F66K80-I/MR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC18F65K40-I/MR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC18F65K80-I/MRVAO
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC18F65K80T-I/MR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC18F66K80-I/MRVAO
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC18F65K80-I/MR Mga Pinakamataas na Rating at Electrical Characteristics
| Product Family | PIC® XLP™ 18K (PIC18F K-series) |
| Core | 8-bit PIC18 enhanced RISC |
| Maximum CPU Speed | 64 MHz (16 MIPS) |
| Program Flash Memory | 32 KB (16K x 16) |
| RAM | 3.6 KB (3.6K x 8) |
| EEPROM | 1 KB |
| Supply Voltage (VDD) | 1.8 V to 5.5 V |
| Number of I/O Pins | 54 |
| Packhaging | 64-VQFN (9x9 mm) with exposed pad |
| Uri ng Pagpapasok | Surface Mount |
| CAN Module | ECAN™ (Enhanced CAN, 6 RX / 3 TX buffers) |
| ADC | 12-bit, multi-channel |
| Special Peripherals | CTMU (Charge Time Measurement Unit) |
| Communication Peripherals | UART, SPI, I2C |
| Low-Power Technology | nanoWatt XLP (sub-100 nA sleep typical) |
| Operating Temperature (I grade) | -40°C to +85°C (industrial) |
| Programming/Debug | ICSP + ICD (MPLAB X, PICKit, ICD) |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng PIC18F65K80-I/MR 64-vqfn (9x9 mm) with exposed pad
Pin configuration para sa PIC18F65K80-I/MR (64-vqfn (9x9 mm) with exposed pad package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC18F65K80-I/MR.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC18F65K80-I/MR ay nararapat para sa 7 aplikasyons: Automotive Body and Gateway ECU, Building Automation and HVAC Controllers, Industrial CAN Sensor Nodes, Medical Patient Monitoring Peripherals, Elevator Control and Drive Interface, Low-Power IoT and Sensor Hubs, Battery-Operated Portable Instruments.
Automotive Body and Gateway ECU
The PIC18F65K80-I/MR is an excellent fit for automotive body and gateway ECUs thanks to its integrated ECAN module, nanoWatt XLP sleep currents below 100 nA typical, and 1.8-5.5 V supply tolerance for direct battery connection. The on-chip ECAN with 6 RX and 3 TX programmable buffers handles bus arbitration and message filtering without an external controller, reducing BOM cost and PCB area. With 32 KB Flash it runs CANopen, J1939 light stacks, or proprietary gateway firmware; 3.6 KB RAM supports typical routing tables. The 12-bit ADC and CTMU enable sensor diagnostics for body modules.
Inirekomenda
Building Automation and HVAC Controllers
For building automation, HVAC, and elevator controllers, the PIC18F65K80-I/MR combines ECAN for BACnet or vendor-proprietary building bus, low standby power for always-on sensor nodes, and 54 I/O for actuator interfaces. nanoWatt XLP technology keeps wall-sensor sleep current under 100 nA, extending battery life on wireless bridges. The CTMU peripheral simplifies capacitive touch keypads for thermostats and access panels. Industrial -40C to +85C operating range handles unconditioned electrical rooms.
Inirekomenda
Industrial CAN Sensor Nodes
In industrial CAN sensor nodes, the PIC18F65K80-I/MR offers the ECAN peripheral plus 12-bit ADC and CTMU in a compact 9x9 mm VQFN that fits DIN-rail sensor heads. The 32 KB Flash accommodates CANopen or DeviceNet slave stacks; 3.6 KB RAM is sufficient for process-data buffers. XLP nanoWatt mode reduces idle power in loop-powered 4-20 mA sensor heads. Its 1.8 V minimum supply supports energy-harvested sensors with supercap buffers.
Inirekomenda
Medical Patient Monitoring Peripherals
The PIC18F65K80-I/MR suits medical peripheral designs where low standby current and an integrated ADC + CTMU matter. The 12-bit ADC reads temperature, SpO2, and battery sense signals; CTMU enables touch controls for handheld patient monitors. nanoWatt XLP keeps battery drain below 100 nA in sleep, preserving shelf life. While the MCU lacks IEC 60730 medical-grade certification by default, design teams commonly pair it with safety MCUs in dual-processor architectures.
Inirekomenda
Elevator Control and Drive Interface
Elevator control panels and drive interfaces benefit from the PIC18F65K80-I/MR's 54 I/O count, ECAN connectivity for floor-network communication, and CTMU for touch-button panels. The 16 MIPS throughput handles floor-level dispatch logic and indicator multiplexing without a DSP. Industrial temperature range and the 64-VQFN's compact footprint fit behind panel faceplates where board area is constrained.
Inirekomenda
Low-Power IoT and Sensor Hubs
The PIC18F65K80-I/MR is a strong fit for battery-powered IoT sensor hubs needing ECAN backhaul, local sensor processing, and multi-year standby. nanoWatt XLP achieves deep-sleep currents below 100 nA, allowing coin-cell sensor nodes to last >5 years on a typical duty cycle. The 12-bit ADC and CTMU combine to read battery voltage and capacitive humidity/touch inputs simultaneously. UART/SPI/I2C peripherals connect to sub-GHz radio modules like NRF or LoRa transceivers for hybrid IoT gateways.
Inirekomenda
Battery-Operated Portable Instruments
Portable test and measurement instruments benefit from the PIC18F65K80-I/MR's 1.8 V minimum supply (single Li-ion cell compatibility), 16 MIPS throughput for real-time DSP, and nanoWatt XLP sleep mode that extends battery life between user measurements. The 12-bit ADC with internal voltage reference provides calibrated measurements without external precision components. CTMU enables capacitive buttons and rotary encoders without mechanical switches.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC18F65K80-I/MR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC18F66K80-I/MR | PIC18F65K40-I/MR | PIC18F65K80-I/MRVAO | PIC18F65K80T-I/MR | PIC18F66K80-I/MRVAO |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN (9x9) | 64-VQFN (9x9) | 64-VQFN (9x9) | 64-VQFN (9x9) | 64-VQFN (9x9) | 64-VQFN (9x9) |
| Flash Memory | 32 KB | 64 KB | 32 KB | 32 KB | 32 KB | 64 KB |
| RAM | 3.6 KB | 3.6 KB | 3.6 KB | 3.6 KB | 3.6 KB | 3.6 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Maximum CPU Speed | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS |
| ECAN Module | Yes (6 RX / 3 TX buffers) | Yes | No (MCCP/SCCP instead) | Yes | Yes | Yes |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +125C (Automotive) | -40C to +85C | -40C to +125C (Automotive) |
| Unit Price (qty 1000) | $3.12 (approx, as of 2026-10-09) | $3.50 (approx, higher Flash cost) | $3.05 (approx, newer family) | $4.10 (approx, automotive) | $3.12 (approx, same die, T&R) | $4.55 (approx, automotive) |
Pangunahing mga Pagkakaiba
- Doubled Flash for upgrade headroom (kumpara saPIC18F66K80-I/MR)
- Newer CWG/WWDT/CRC peripherals (kumpara saPIC18F65K40-I/MR)
- Automotive temperature grade option (kumpara saPIC18F65K80-I/MRVAO)
Talaan ng Disenyo
Place one 100 nF ceramic bypass capacitor within 3 mm of every VDD/VDDCORE pin pair, plus one 10 µF bulk capacitor near the package. The exposed thermal pad is internally bonded to ground - solder it to a continuous top-layer ground plane with multiple stitched vias to a ground fill on layer 2. Inadequate ground stitching on the thermal pad increases EMI and reduces ADC accuracy on adjacent channels. nanoWatt XLP sleep current is only achievable with all unused pins configured as outputs driving low and unused peripherals gated off in firmware.
The 64-VQFN (9x9 mm) exposed-pad package requires thermal relief patterns that balance solder joint reliability and thermal dissipation. Use NSMD (non-solder mask defined) pads with 0.2-0.25 mm solder mask expansion around each perimeter pad. The center exposed pad should be split into 4-9 sub-pads with thermal relief spokes to prevent tombstoning during reflow. Estimated: with proper 4-spoke thermal relief and 4-layer 1 oz copper ground plane, theta_JA is approximately 28 C/W - adequate for the K80 family at full 64 MHz without external heatsinking.
Do not enable the ECAN peripheral until the MCP2551 or similar external CAN transceiver has stable VCC and the bus is properly terminated with 120 Ω at each end. Enabling ECAN before the transceiver is ready can corrupt the receive filters. Always keep the ICSP/ICD pins (PGEC1/PGED1) accessible in production designs - adding 4.7 kΩ series resistors is fine, but do not place capacitors on these lines as they will distort programming waveforms. For automotive designs, select the PIC18F65K80-I/MRVAO variant for -40C to +125C grade.
Impormasyon ng Pagsunod sa Kautusan
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified in standard I-grade - choose PIC18F65K80-I/MRVAO automotive variant for AEC-Q100 screening. Lead-free (Pb-free) reflow profile per JEDEC J-STD-020.
