AMD

XC7A200T-L2FBG676E - 215K-Logic-Cell Artix-7 FPGA | AMD

MPN: XC7A200T-L2FBG676E ✓ Nakahanda
1 V Vdss 676-pin FCBGA Package 13,140 Kb block RAM Memory
MOQ: 1 |

XC7A200T-L2FBG676E Ulas

AMD XC7A200T-L2FBG676E is an Artix-7 field-programmable gate array with 215,360 logic cells, 13,140 Kb of block RAM, 740 DSP slices, and 400 I/Os, manufactured on a 28 nm process in a 676-pin FCBGA package. The device supports a 1 V core supply and is specified for an extended 0°C to 100°C junction-temperature range.

An FPGA is a reconfigurable digital semiconductor that combines programmable logic, block RAM, digital signal processing resources, and programmable input/output blocks on one device. Within the semiconductor hierarchy, the XC7A200T belongs to the Xilinx 7-series FPGA family and the Artix-7 product line. It is positioned between simpler fixed-function logic and larger FPGA families requiring greater connectivity, performance, or resources.

Principal resources include 215,360 programmable logic cells, 13,140 Kb of block RAM, 740 DSP slices, and 400 I/Os. The DSP resources accelerate fixed-point operations, while block RAM supports packet buffering, data acquisition, and local storage. Four hundred user I/Os provide substantial board-level connectivity for high-speed parallel interfaces, control logic, clocks, and external memory.

The FCBGA-676 package uses a 27 mm by 27 mm substrate and 676 solder balls. Its large ball grid supports dense routing and high I/O counts, but it also requires careful escape routing, multilayer PCB construction, thermal analysis, and assembly-process control. The FBG676 designation identifies a leaded FCBGA configuration associated with the Artix-7 package family.

Typical uses include industrial control, test and measurement equipment, communications infrastructure, high-speed data acquisition, embedded vision, and digital signal-processing systems. The 740 DSP slices make the device suitable for filtering, modulation, demodulation, fixed-point arithmetic, and other parallel processing workloads. Its 400 I/Os allow substantial interface concurrency when board-level routing and signal-integrity requirements are manageable.

PCB design should include ball-grid escape layers, split supply planes, decoupling close to every supply ball group, and thermal paths from the device into inner copper and the PCB stack. The BGA assembly process must control solder-paste volume, reflow profile, voiding beneath the package, and coplanarity. Differential and high-speed interfaces also require length matching and return-path continuity derived from the device pinout and board constraints.

This product page organizes the device specifications, exact-package alternatives, application guidance, and design considerations into one engineering reference. It also distinguishes true same-footprint replacements from devices that require a different package or board redesign.

Mga alternatibo na pwedeng ilagay na XC7A200T-L2FBG676E — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok XC7A200T-L2FBG676E (parehas na form factor at footprint) — pagkakaiba sa Package, Device Type, Block RAM, Logic Cells, Process Technology.

AMD
Package: 676-pin FCBGA (FBG676)
Device Type: Artix-7 Field-Programmable Gate Array (FPGA)
Ikabit sa XC7A200T-L2FBG676E →
AMD
Package: FCBGA-676 (FBG676)
Logic Cells: 740K
Ikabit sa XC7A200T-L2FBG676E →
AMD
Package: 676-FCBGA (27x27)
Process Technology: 28nm HKMG
Ikabit sa XC7A200T-L2FBG676E →
AMD
Package: 676-BBGA FCBGA
Device Type: Artix-7 field-programmable gate array
Block RAM: 13,455,360 bits (12.83 Mbit)
Ikabit sa XC7A200T-L2FBG676E →
AMD
Package: 676-ball FCBGA
Device Type: Artix-7 FPGA
Ikabit sa XC7A200T-L2FBG676E →

XC7A200T-1FBG676I

✅ Drop-In
AMD
📦 676-pin FCBGA (FBG676)
Artix-7 · 740K · 215,360 · 13,140 Kb · 10.5 Mb · 365 · 400 · 1.0 V

✓ Sa Stock

$390 / Yunit

Tingnan ang Datasheet →

XC7A200T-1FBG676C

✅ Drop-In
AMD
📦 676-pin FCBGA (FBG676)
Artix-7 Field-Programmable Gate Array (FPGA) · 215,360 cells · 13,140 Kb · 740 slices · 400 inputs and 400 outputs · 676 terminals · 676-pin FCBGA (FBG676) · 27 mm x 27 mm

Magkontak para sa presyo

Tingnan ang Datasheet →

XC7A200T-2FBG676I

✅ Drop-In
AMD
📦 676-pin FCBGA (FBG676)
Artix-7 · 16825 · 215360 · 13455360 · 400 · 676-FCBGA (27x27) · -40°C to 100°C (TJ) · SMD (SMT)

✓ Sa Stock

$100 / Yunit

Tingnan ang Datasheet →

XC7A200T-2FBG676E

✅ Drop-In
📦 676-pin FCBGA (FBG676)
Retains the -2 speed designation and E temperature suffix but omits the target's L prefix; the core FPGA resources and package are unchanged.

📋 Alternatibo na Reference (hindi sa katalogo)

XC7A200T-3FBG676E

✅ Drop-In
AMD
📦 676-pin FCBGA (FBG676)
Artix-7 · Artix-7 field-programmable gate array · 215,360 cells · 33,650 ALMs · 16,825 logic cells · 13,455,360 bits (12.83 Mbit) · 400 I/O · 28 nm

Magkontak para sa presyo

Tingnan ang Datasheet →

XC7A200T-L2FBG676E Mga Pinakamataas na Rating at Electrical Characteristics

FPGA Family Artix-7
Device Type Field-Programmable Gate Array (FPGA)
Logic Cells 215,360 cells
Block RAM 13,140 Kb
DSP Slices 740 slices
User I/O Count 400 I/Os
Process Technology 28 nm
Core Supply Voltage 1 V
Package Type 676-pin FCBGA
Package Dimensions 27 mm x 27 mm
Package Family FBG676
Uri ng Pagpapasok Surface Mount
Extended Temperature Range 0°C to 100°C junction
Tindminan RoHS Compliant
Programmable Logic Type Configurable logic blocks
Programmable I/O Resources 400 user I/Os
Signal-Processing Resources 740 DSP slices
On-Chip Memory 13,140 Kb block RAM

Gabay sa Pin Configuration ng XC7A200T-L2FBG676E fbg676

Pin configuration para sa XC7A200T-L2FBG676E (fbg676 package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng fbg676 package para sa XC7A200T-L2FBG676E

Wala ng detalyadong pinout data na magagamit para sa XC7A200T-L2FBG676E.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

XC7A200T-L2FBG676E ay nararapat para sa 6 aplikasyons: Industrial Control and Automation, High-Speed Data Acquisition, Communications and Signal Processing, Test and Measurement Equipment, Embedded Vision and Image Processing, Aerospace and Defense Control Systems.

🏭

Industrial Control and Automation

The XC7A200T-L2FBG676E fits industrial controllers that combine deterministic machine control, diagnostics, communications, and local data handling. Its 215,360 logic cells can host control logic and protocol state machines, while 13,140 Kb of block RAM supports event logs and message buffers. The 400 I/Os provide substantial connectivity for sensors, actuators, encoders, and field-bus transceivers. The 0°C to 100°C junction-temperature designation supports extended-temperature operation when paired with an appropriate supply, enclosure, thermal path, and isolation strategy.

📺

High-Speed Data Acquisition

The XC7A200T-L2FBG676E is appropriate for parallel data-acquisition systems requiring substantial logic, buffering, and digital processing. The 740 DSP slices can perform filtering and fixed-point transforms, while 13,140 Kb of block RAM can hold sample buffers and intermediate results. Up to 400 user I/Os allow multiple converter, trigger, timing, and status interfaces. Practical designs should define converter data widths and sample rates before implementation, then use source-synchronous routing rules and matched power distribution to preserve signal integrity.

🌐

Communications and Signal Processing

The XC7A200T-L2FBG676E can implement parallel communication protocols, modulation, filtering, and packet-processing functions because it combines 215,360 logic cells with 740 dedicated DSP slices. Block RAM provides storage for symbol buffers and protocol queues, and the large I/O count supports parallel datapaths. For high-speed serial links, board-level signal integrity and device pin capabilities must be evaluated together. A practical advantage over smaller Artix-7 devices is the ability to consolidate multiple datapaths and buffering functions into one programmable package.

🔧

Test and Measurement Equipment

The XC7A200T-L2FBG676E supports configurable sequencing, pattern generation, acquisition, and real-time analysis in test equipment. Its programmable logic resources can implement timing and control engines, the 13,140 Kb of block RAM can capture vectors or intermediate measurements, and the 740 DSP slices can accelerate filtering and numeric transforms. The 400 I/Os permit broad instrument I/O concurrency. Production designs should separate sensitive analog or timing-sensitive circuitry from the FPGA and verify power sequencing, termination, and thermal behavior across temperature.

🎥

Embedded Vision and Image Processing

The XC7A200T-L2FBG676E can serve as a parallel image-processing controller when a design requires deterministic operation, multiple sensor interfaces, and local buffering. The 215,360 logic cells support control pipelines and interface logic, the 13,140 Kb of block RAM accommodates line and frame buffers, and 740 DSP slices accelerate pixel arithmetic and filtering. The 400 I/Os allow multiple camera, storage, and synchronization channels. Designers should budget memory bandwidth, constrain high-speed interfaces, and validate image timing under the intended sensor resolution and frame rate.

✈️

Aerospace and Defense Control Systems

The XC7A200T-L2FBG676E can be evaluated for programmable avionics, control, monitoring, and data-processing functions that require deterministic logic and extensive I/O. Its 215,360 logic cells, 13,140 Kb of block RAM, and 740 DSP slices support consolidated processing, while the FBG676 package offers 400 user I/Os. The extended-temperature marking alone does not constitute application-specific qualification. Selection must therefore include the exact AMD ordering information, radiation and reliability requirements, environmental testing, configuration-security procedures, and customer-controlled quality processes.

What are the key specifications of XC7A200T-L2FBG676E that engineers should know?
The XC7A200T-L2FBG676E is an Artix-7 FPGA with 215,360 logic cells, 13,140 Kb of block RAM, 740 DSP slices, and 400 user I/Os. According to the manufacturer datasheet, it uses a 28 nm process, a 1 V core supply, and a 676-pin FCBGA package measuring 27 mm by 27 mm. Its extended-temperature designation indicates operation from 0°C to 100°C junction temperature. These resources determine its suitability for parallel digital processing, embedded storage, and interface-heavy industrial systems.
Where can I download the XC7A200T-L2FBG676E datasheet PDF?
The XC7A200T-L2FBG676E datasheet PDF is available through the manufacturer documentation links and the listed document mirrors. The primary document is the Artix-7 FPGA DC and AC Switching Characteristics data sheet, which covers device resources, package information, pin characteristics, electrical limits, and speed-grade behavior. Use the exact MPN when reviewing ordering information, and consult the AMD package-pinout files for complete ball assignments and PCB-library data.
Where can I find the XC7A200T-L2FBG676E pinout and package information?
The XC7A200T-L2FBG676E pinout is published in the Artix-7 package-device pinout files and the manufacturer FPGA pinout documentation referenced by the AMD package resources. The device uses an FBG676 package with 676 balls on a 27 mm by 27 mm substrate. Use the package pinout file for exact ball names, supply assignments, and user I/O locations; the public pinout resource provides the data needed to create a PCB footprint and verify power connectivity.
Can XC7A200T-L2FBG676E replace XC7A200T-3FBG676E?
The XC7A200T-L2FBG676E and XC7A200T-3FBG676E use the same FBG676 package and therefore support the same board footprint. Their speed-grade designation differs, with the target carrying L2 and the alternative carrying 3, so replacement suitability depends on timing closure, power limits, and the original design constraints. Confirm the complete ordering information, electrical limits, configuration compatibility, and timing margins before treating the substitution as production-equivalent.
What is the difference between XC7A200T-L2FBG676E and XC7A200T-2FBG676I?
Both devices are based on the XC7A200T Artix-7 FPGA and use the 676-pin FCBGA package, but their ordering suffixes identify different grade or temperature options. The target is ordered as XC7A200T-L2FBG676E, while the comparison part is ordered as XC7A200T-2FBG676I. Their shared 215,360-cell, 13,140-Kb block-RAM, and 740-DSP architecture makes them mechanically compatible, while the suffix change requires verification against the manufacturer's ordering guide and system timing requirements.
What can replace XC7A200T-L2FBG676E on the same PCB?
Same-PCB replacements must use the FBG676 footprint and preserve the required configuration, memory, DSP, and I/O functions. Suitable candidates include the XC7A200T-1FBG676C, XC7A200T-1FBG676I, XC7A200T-2FBG676E, XC7A200T-2FBG676I, and XC7A200T-3FBG676E variants identified in the package comparisons. The closest functional choice depends on speed grade and temperature suffix. Validate the replacement against timing, power, qualification, and lifecycle requirements rather than relying only on package equality.
When should I choose XC7A200T-L2FBG676E over a faster XC7A200T variant?
Choose XC7A200T-L2FBG676E when its specified performance grade, power behavior, temperature qualification, and system timing margins satisfy the design. A faster -3 grade may provide additional timing margin, but it can alter power consumption and thermal requirements. For designs operating near a critical path, compare the speed grade under the actual voltage, temperature, and utilization conditions. For designs with generous timing margin, the target may be preferable when its electrical and thermal characteristics better match the product objectives.
Is XC7A200T-L2FBG676E suitable for industrial control and data-acquisition systems?
The XC7A200T-L2FBG676E is suitable for many industrial control and data-acquisition systems because it combines 215,360 logic cells, 13,140 Kb of block RAM, 740 DSP slices, and 400 I/Os. Its extended 0°C to 100°C junction-temperature designation supports applications beyond ordinary commercial-temperature conditions. The board must still be designed for the specified operating environment, including supply regulation, thermal management, isolation requirements, EMC controls, and any application-specific qualification obligations.
How much power does the XC7A200T-L2FBG676E consume?
XC7A200T-L2FBG676E power consumption depends on core voltage, switching activity, I/O loading, configuration state, junction temperature, and the selected speed grade. The manufacturer datasheet provides device-specific operating conditions and current information needed for system-level calculation. Use Vivado power estimation and the datasheet limits for the intended design. Board design should preserve the required supply sequencing and provide adequate thermal dissipation around the 676-ball FCBGA.
How should the 676-pin FCBGA be handled during PCB layout and assembly?
The 676-pin FCBGA requires multilayer routing, controlled escape routing, and a validated BGA land pattern with appropriate pad and solder-mask definitions. Place decoupling close to the relevant supply balls and maintain continuous return paths beneath high-speed nets. Assembly controls should include controlled stencil apertures, reflow profiling, X-ray inspection, and void monitoring beneath the package. The 27 mm by 27 mm body also requires thermal vias and sufficient inner copper to transfer heat away from the device.
Where can I buy XC7A200T-L2FBG676E and what is its current lead time?
Use the Request a Quote form on this page to request availability, lead time, and ordering support for the exact XC7A200T-L2FBG676E MPN. Quote requests should include the required quantity, date code needs, target delivery date, and whether the complete FBG676 package and grade are mandatory. Commercial stock and lead time can change, so obtaining a current written quotation avoids relying on an outdated listing or assuming that a different speed-grade suffix is interchangeable.
What is the price of XC7A200T-L2FBG676E?
The current commercial price for XC7A200T-L2FBG676E is handled through the Request a Quote form on this page. The form can return a quantity-based quotation for the exact 676-pin FCBGA ordering code and any requested volume or date-code constraints. Because FPGA pricing can depend strongly on configuration, lead time, and availability, request a quotation rather than relying on a historical listing or an alternate package suffix that does not match the required device.
Is XC7A200T-L2FBG676E in stock?
Current stock for XC7A200T-L2FBG676E should be confirmed through the Request a Quote form on this page. Availability can vary by the exact suffix, production status, and requested quantity. Include the target quantity and required delivery date in the request so the supply response reflects the intended build. Do not treat a listing for a nearby -1, -2, or -3 speed grade as confirmation that the exact XC7A200T-L2FBG676E order code is available.
What is the best AMD equivalent for XC7A200T-L2FBG676E?
The closest AMD equivalents are same-package XC7A200T variants in the FBG676 configuration, such as XC7A200T-1FBG676I, XC7A200T-2FBG676I, XC7A200T-2FBG676E, and XC7A200T-3FBG676E. All retain the 215,360-cell Artix-7 device identity and 676-ball package, but the speed-grade and temperature suffixes differ. Select the candidate that satisfies the original timing, power, temperature, qualification, and lifecycle constraints, then rerun implementation and timing checks before release.
Does XC7A200T-L2FBG676E support the same FPGA design tools as other Artix-7 devices?
The XC7A200T-L2FBG676E is supported by the AMD Xilinx FPGA design flow, including Vivado Design Suite and the associated programming and configuration tools for 7-series devices. Designers should install the device support for the exact package and speed-grade suffix, then confirm pin constraints and timing during implementation. A drop-in device with the same package can retain an existing board layout, but it still requires a fresh bitstream, timing analysis, and hardware validation.
Is XC7A200T-L2FBG676E RoHS compliant?
The XC7A200T-L2FBG676E is identified as RoHS compliant in its component documentation. RoHS compliance concerns restrictions on specified hazardous substances in the electronic product, but it does not by itself establish suitability for every automotive, industrial, or safety-regulated application. For qualified deployments, review the exact ordering code, material declarations, environmental test requirements, and customer-specific quality procedures before approving the device.

Impormasyon ng Talumpati sa Engineering for XC7A200T-L2FBG676E — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose XC7A200T-L2FBG676E when the design uses the Artix-7 XC7A200T resource set, requires the FBG676 footprint, and satisfies the L2 ordering code's timing, power, and temperature requirements. Select XC7A200T-3FBG676E when additional timing margin is needed and its power and thermal behavior fit the system. Consider XC7A200T-1FBG676I or XC7A200T-1FBG676C when the design can operate with the lower speed designation and the required temperature grade is acceptable. Use XC7A200T-2FBG676I when the I temperature suffix meets the deployment environment, and evaluate XC7A200T-2FBG676E when its ordering-code differences are acceptable. Every candidate retains the same package, so the PCB can generally be reused, but timing closure, configuration, qualification, and environmental requirements must be revalidated for the exact selected MPN.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto XC7A200T-1FBG676I XC7A200T-1FBG676C XC7A200T-2FBG676I XC7A200T-2FBG676E XC7A200T-3FBG676E
Brand AMD AMD AMD AMD AMD AMD
Package 676-pin FCBGA (FBG676) 676-pin FCBGA (FBG676) 676-pin FCBGA (FBG676) 676-pin FCBGA (FBG676) 676-pin FCBGA (FBG676) 676-pin FCBGA (FBG676)
Series Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Logic Cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells
Block RAM 13,140 Kb 13,140 Kb 13,140 Kb 13,140 Kb 13,140 Kb 13,140 Kb
DSP Slices 740 slices 740 slices 740 slices 740 slices 740 slices 740 slices
User I/O Count 400 I/Os 400 I/Os 400 I/Os 400 I/Os 400 I/Os 400 I/Os
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Core Supply Voltage 1 V 1 V 1 V 1 V 1 V 1 V
Speed Designation L2 -1 -1 -2 -2 -3
Temperature Suffix E I C I E E

Pangunahing mga Pagkakaiba

  • Large programmable resource pool in a single Artix-7 device (kumpara saXC7A200T-3FBG676E)
  • Extended-temperature ordering option (kumpara saXC7A200T-2FBG676I)
  • Pin-compatible migration across speed grades (kumpara saXC7A200T-1FBG676I)
  • Exact FBG676 footprint continuity (kumpara saXC7A200T-2FBG676E)

Talaan ng Disenyo

Treat the FBG676 package as a concentrated heat source and route heat into inner copper through a designed array of thermal vias rather than relying only on the outer copper layers. Confirm the selected board stack, copper weight, via construction, enclosure airflow, and ambient temperature. Use the manufacturer power-estimation methodology with realistic clocking, I/O activity, and resource utilization. Estimated temperature-rise calculations are design checks, not manufacturer specifications, and should be repeated for each implemented configuration.

Build the power distribution network around the manufacturer's recommended ball-group decoupling and supply-separation scheme. Place bulk and local decoupling capacitors close to their assigned supply and ground balls, and connect each decoupling return directly to the nearest ground reference plane. Avoid routing high-speed signals through the power plane's return path, and preserve uninterrupted reference planes beneath BGA escape routing. Validate escape length, via count, and antipad geometry against the selected PCB stack.

Do not substitute an XC7A200T variant solely because it uses an FBG676 package. Confirm the speed designation, temperature suffix, configuration compatibility, electrical limits, and qualification requirements. After changing the ordering code, regenerate the bitstream, rerun synthesis and implementation for the selected part, and inspect timing and power reports. A mechanical drop-in replacement is not automatically a functional drop-in replacement, especially when the design contains little timing margin.

Use the AMD Artix-7 package-device pinout files to create and cross-check the 676-ball footprint. Pay particular attention to power, ground, configuration, clock, and user I/O ball assignments. For memory or high-speed interfaces, match source and destination traces and maintain continuous reference planes. Keep BGA escape routing symmetrical where possible, minimize stubs, and review the complete stack-up with the board manufacturer before releasing the fabrication files.

Plan the assembly process for a 676-ball FCBGA rather than treating it as a leaded BGA. Control stencil aperture area, solder-paste viscosity, reflow temperature, and dwell time using the package assembly guidance. Inspect for solder voids, insufficient fill, bridging, and warpage, particularly beneath the large package. A rework plan should include localized heating limits and verification of the assembled BGA because mechanical stress can create latent interconnect defects.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The component documentation identifies the exact XC7A200T-L2FBG676E as RoHS compliant. Application-specific qualification remains dependent on the exact ordering code and customer requirements.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

xc7a200t datasheet xc7a200t board xc7a200t development board xc7a200t price xc7a200t fpga xc7a200t 2fbg484i xc7a200t 2fbg676i xc7a200t 2ffg1156i xc7a200t 1ffg1156i xc7a200t 2sbg484i XC7A200T-L2FBG676E datasheet XC7A200T-L2FBG676E pinout XC7A200T-L2FBG676E replacement XC7A200T-L2FBG676E FBG676 footprint AMD XC7A200T-L2FBG676E

Mga kaugnay na Mga Komponente at mga Tuntunin

AMD XC7A200T-L2FBG676E XC7A200T-1FBG676I XC7A200T-1FBG676C XC7A200T-2FBG676I XC7A200T-2FBG676E XC7A200T-3FBG676E Artix-7 7-series FPGA field-programmable gate array FPGA CPLD programmable logic logic cell block RAM DSP slice user I/O FBG676 676-pin FCBGA BGA package surface mount 28 nm process Vivado Design Suite industrial control data acquisition RoHS
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ