XC7A200T-L2FBG676E - 215K-Logic-Cell Artix-7 FPGA | AMD
MPN: XC7A200T-L2FBG676E ✓ Hoạt độngXC7A200T-L2FBG676E Tóm tắt
An FPGA is a reconfigurable digital semiconductor that combines programmable logic, block RAM, digital signal processing resources, and programmable input/output blocks on one device. Within the semiconductor hierarchy, the XC7A200T belongs to the Xilinx 7-series FPGA family and the Artix-7 product line. It is positioned between simpler fixed-function logic and larger FPGA families requiring greater connectivity, performance, or resources.
Principal resources include 215,360 programmable logic cells, 13,140 Kb of block RAM, 740 DSP slices, and 400 I/Os. The DSP resources accelerate fixed-point operations, while block RAM supports packet buffering, data acquisition, and local storage. Four hundred user I/Os provide substantial board-level connectivity for high-speed parallel interfaces, control logic, clocks, and external memory.
The FCBGA-676 package uses a 27 mm by 27 mm substrate and 676 solder balls. Its large ball grid supports dense routing and high I/O counts, but it also requires careful escape routing, multilayer PCB construction, thermal analysis, and assembly-process control. The FBG676 designation identifies a leaded FCBGA configuration associated with the Artix-7 package family.
Typical uses include industrial control, test and measurement equipment, communications infrastructure, high-speed data acquisition, embedded vision, and digital signal-processing systems. The 740 DSP slices make the device suitable for filtering, modulation, demodulation, fixed-point arithmetic, and other parallel processing workloads. Its 400 I/Os allow substantial interface concurrency when board-level routing and signal-integrity requirements are manageable.
PCB design should include ball-grid escape layers, split supply planes, decoupling close to every supply ball group, and thermal paths from the device into inner copper and the PCB stack. The BGA assembly process must control solder-paste volume, reflow profile, voiding beneath the package, and coplanarity. Differential and high-speed interfaces also require length matching and return-path continuity derived from the device pinout and board constraints.
This product page organizes the device specifications, exact-package alternatives, application guidance, and design considerations into one engineering reference. It also distinguishes true same-footprint replacements from devices that require a different package or board redesign.
Bộ thay thế dễ dàng lắp đặt cho XC7A200T-L2FBG676E — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7A200T-L2FBG676E (cùng hình factor và footprint) — khác nhau ở Package, Device Type, Block RAM, Logic Cells, Process Technology.
XC7A200T-1FBG676I
✅ Drop-In✓ Còn hàng
$390 / Đơn vị
Xem tài liệu →XC7A200T-1FBG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A200T-2FBG676I
✅ Drop-In✓ Còn hàng
$100 / Đơn vị
Xem tài liệu →XC7A200T-2FBG676E
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7A200T-3FBG676E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A200T-L2FBG676E Tỷ lệ tối đa & tính chất điện
| FPGA Family | Artix-7 |
| Device Type | Field-Programmable Gate Array (FPGA) |
| Logic Cells | 215,360 cells |
| Block RAM | 13,140 Kb |
| DSP Slices | 740 slices |
| User I/O Count | 400 I/Os |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Package Type | 676-pin FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Package Family | FBG676 |
| Kiểu lắp đặt | Surface Mount |
| Extended Temperature Range | 0°C to 100°C junction |
| Trạng thái RoHS | Compliant |
| Programmable Logic Type | Configurable logic blocks |
| Programmable I/O Resources | 400 user I/Os |
| Signal-Processing Resources | 740 DSP slices |
| On-Chip Memory | 13,140 Kb block RAM |
Hướng dẫn cấu hình chân XC7A200T-L2FBG676E fbg676
Cấu hình chân cho XC7A200T-L2FBG676E (fbg676 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7A200T-L2FBG676E.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7A200T-L2FBG676E phù hợp cho 6 Áp dụngs: Industrial Control and Automation, High-Speed Data Acquisition, Communications and Signal Processing, Test and Measurement Equipment, Embedded Vision and Image Processing, Aerospace and Defense Control Systems.
Industrial Control and Automation
The XC7A200T-L2FBG676E fits industrial controllers that combine deterministic machine control, diagnostics, communications, and local data handling. Its 215,360 logic cells can host control logic and protocol state machines, while 13,140 Kb of block RAM supports event logs and message buffers. The 400 I/Os provide substantial connectivity for sensors, actuators, encoders, and field-bus transceivers. The 0°C to 100°C junction-temperature designation supports extended-temperature operation when paired with an appropriate supply, enclosure, thermal path, and isolation strategy.
Được đề xuất
High-Speed Data Acquisition
The XC7A200T-L2FBG676E is appropriate for parallel data-acquisition systems requiring substantial logic, buffering, and digital processing. The 740 DSP slices can perform filtering and fixed-point transforms, while 13,140 Kb of block RAM can hold sample buffers and intermediate results. Up to 400 user I/Os allow multiple converter, trigger, timing, and status interfaces. Practical designs should define converter data widths and sample rates before implementation, then use source-synchronous routing rules and matched power distribution to preserve signal integrity.
Được đề xuất
Communications and Signal Processing
The XC7A200T-L2FBG676E can implement parallel communication protocols, modulation, filtering, and packet-processing functions because it combines 215,360 logic cells with 740 dedicated DSP slices. Block RAM provides storage for symbol buffers and protocol queues, and the large I/O count supports parallel datapaths. For high-speed serial links, board-level signal integrity and device pin capabilities must be evaluated together. A practical advantage over smaller Artix-7 devices is the ability to consolidate multiple datapaths and buffering functions into one programmable package.
Được đề xuất
Test and Measurement Equipment
The XC7A200T-L2FBG676E supports configurable sequencing, pattern generation, acquisition, and real-time analysis in test equipment. Its programmable logic resources can implement timing and control engines, the 13,140 Kb of block RAM can capture vectors or intermediate measurements, and the 740 DSP slices can accelerate filtering and numeric transforms. The 400 I/Os permit broad instrument I/O concurrency. Production designs should separate sensitive analog or timing-sensitive circuitry from the FPGA and verify power sequencing, termination, and thermal behavior across temperature.
Được đề xuất
Embedded Vision and Image Processing
The XC7A200T-L2FBG676E can serve as a parallel image-processing controller when a design requires deterministic operation, multiple sensor interfaces, and local buffering. The 215,360 logic cells support control pipelines and interface logic, the 13,140 Kb of block RAM accommodates line and frame buffers, and 740 DSP slices accelerate pixel arithmetic and filtering. The 400 I/Os allow multiple camera, storage, and synchronization channels. Designers should budget memory bandwidth, constrain high-speed interfaces, and validate image timing under the intended sensor resolution and frame rate.
Được đề xuất
Aerospace and Defense Control Systems
The XC7A200T-L2FBG676E can be evaluated for programmable avionics, control, monitoring, and data-processing functions that require deterministic logic and extensive I/O. Its 215,360 logic cells, 13,140 Kb of block RAM, and 740 DSP slices support consolidated processing, while the FBG676 package offers 400 user I/Os. The extended-temperature marking alone does not constitute application-specific qualification. Selection must therefore include the exact AMD ordering information, radiation and reliability requirements, environmental testing, configuration-security procedures, and customer-controlled quality processes.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7A200T-L2FBG676E — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7A200T-1FBG676I | XC7A200T-1FBG676C | XC7A200T-2FBG676I | XC7A200T-2FBG676E | XC7A200T-3FBG676E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-pin FCBGA (FBG676) | 676-pin FCBGA (FBG676) | 676-pin FCBGA (FBG676) | 676-pin FCBGA (FBG676) | 676-pin FCBGA (FBG676) | 676-pin FCBGA (FBG676) |
| Series | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells |
| Block RAM | 13,140 Kb | 13,140 Kb | 13,140 Kb | 13,140 Kb | 13,140 Kb | 13,140 Kb |
| DSP Slices | 740 slices | 740 slices | 740 slices | 740 slices | 740 slices | 740 slices |
| User I/O Count | 400 I/Os | 400 I/Os | 400 I/Os | 400 I/Os | 400 I/Os | 400 I/Os |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Speed Designation | L2 | -1 | -1 | -2 | -2 | -3 |
| Temperature Suffix | E | I | C | I | E | E |
Bảo phân biệt quan trọng
- Large programmable resource pool in a single Artix-7 device (vsXC7A200T-3FBG676E)
- Extended-temperature ordering option (vsXC7A200T-2FBG676I)
- Pin-compatible migration across speed grades (vsXC7A200T-1FBG676I)
- Exact FBG676 footprint continuity (vsXC7A200T-2FBG676E)
Ghi chú thiết kế
Treat the FBG676 package as a concentrated heat source and route heat into inner copper through a designed array of thermal vias rather than relying only on the outer copper layers. Confirm the selected board stack, copper weight, via construction, enclosure airflow, and ambient temperature. Use the manufacturer power-estimation methodology with realistic clocking, I/O activity, and resource utilization. Estimated temperature-rise calculations are design checks, not manufacturer specifications, and should be repeated for each implemented configuration.
Build the power distribution network around the manufacturer's recommended ball-group decoupling and supply-separation scheme. Place bulk and local decoupling capacitors close to their assigned supply and ground balls, and connect each decoupling return directly to the nearest ground reference plane. Avoid routing high-speed signals through the power plane's return path, and preserve uninterrupted reference planes beneath BGA escape routing. Validate escape length, via count, and antipad geometry against the selected PCB stack.
Do not substitute an XC7A200T variant solely because it uses an FBG676 package. Confirm the speed designation, temperature suffix, configuration compatibility, electrical limits, and qualification requirements. After changing the ordering code, regenerate the bitstream, rerun synthesis and implementation for the selected part, and inspect timing and power reports. A mechanical drop-in replacement is not automatically a functional drop-in replacement, especially when the design contains little timing margin.
Use the AMD Artix-7 package-device pinout files to create and cross-check the 676-ball footprint. Pay particular attention to power, ground, configuration, clock, and user I/O ball assignments. For memory or high-speed interfaces, match source and destination traces and maintain continuous reference planes. Keep BGA escape routing symmetrical where possible, minimize stubs, and review the complete stack-up with the board manufacturer before releasing the fabrication files.
Plan the assembly process for a 676-ball FCBGA rather than treating it as a leaded BGA. Control stencil aperture area, solder-paste viscosity, reflow temperature, and dwell time using the package assembly guidance. Inspect for solder voids, insufficient fill, bridging, and warpage, particularly beneath the large package. A rework plan should include localized heating limits and verification of the assembled BGA because mechanical stress can create latent interconnect defects.
Thông tin tuân thủ
The component documentation identifies the exact XC7A200T-L2FBG676E as RoHS compliant. Application-specific qualification remains dependent on the exact ordering code and customer requirements.