XC7Z045-2FBG676CES - 350K Logic Cell Zynq SoC | AMD
MPN: XC7Z045-2FBG676CES ✓ NakahandaXC7Z045-2FBG676CES Ulas
A Zynq system-on-chip is an FPGA-and-processor hybrid, combining the deterministic parallel performance of FPGA fabric with the programmability of a general-purpose embedded processor. Within the broader semiconductor hierarchy, this device is a system-on-chip, an adaptive SoC, an FPGA, and an embedded processing platform. It allows software running on the ARM Cortex-A9 processor to interact with hardware implemented in the programmable-logic section.
The XC7Z045 provides 350K logic cells and an 800 MHz processor operating point. Listings identify connectivity including CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, and USB OTG. The 676-FCBGA package offers dense connectivity for high-speed fabric, memory interfaces, processor peripherals, and general-purpose I/O, although a complete pin map requires the package documentation and board design files.
The Zynq architecture is organized around shared memory and programmable logic. Software can execute in the ARM processing system while dedicated hardware blocks accelerate parallel workloads. This division is useful when deterministic timing, high data throughput, or custom interfaces are required without moving the entire application into RTL. CoreSight support provides a common debug and trace framework for the integrated processing and logic resources.
Typical uses include industrial control, machine vision, network equipment, embedded servers, data acquisition, communications infrastructure, and high-performance embedded systems. A 350K-cell fabric can implement parallel image-processing pipelines, protocol bridges, custom accelerators, or high-speed interface logic, while the Cortex-A9 side supports control software, networking stacks, and an operating system.
Board design must account for the 27 mm by 27 mm FCBGA, its ball grid, power sequencing, decoupling, thermal management, and high-speed routing. Use the manufacturer package files and reference designs when assigning balls, validating escape routing, and planning thermal vias rather than relying on generic BGA layout assumptions.
This product record combines the device architecture, package and interface details, commercial procurement guidance, drop-in family alternatives, and practical implementation considerations in a format that helps engineers evaluate hardware partitioning and PCB design before committing to a Zynq-7000 design.
Mga alternatibo na pwedeng ilagay na XC7Z045-2FBG676CES — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7Z045-2FBG676CES (parehas na form factor at footprint) — pagkakaiba sa Package, Logic Cells, Maximum Clock Frequency, Operating Temperature, Speed Grade.
XC7Z045-2FBG676I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z045-2FBG676E
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z045-2FBG676C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z045-1FBG676CES
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z045-1FBG676I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z045-2FBG676CES Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Zynq-7000 Kintex-7 FPGA system-on-chip |
| Processor Cores | 2 ARM Cortex-A9 cores |
| Processor Frequency | 800 MHz |
| Programmable Logic | 350K logic cells |
| Debug Support | CoreSight |
| Packhaging | 676-FCBGA, 27 mm x 27 mm |
| Package Type | FCBGA |
| Ball Count | 676 balls |
| Package Dimensions | 27 mm x 27 mm |
| Volte ng Pagbibigay | 1.2 V / 3.3 V |
| Instruction Set | Thumb-2, 32-bit |
| CAN Bus Support | Yes |
| Ethernet Support | Yes |
| I2C Support | Yes |
| MMC/SD/SDIO Support | Yes |
| SPI Support | Yes |
| UART/USART Support | Yes |
| USB Support | USB OTG |
Gabay sa Pin Configuration ng XC7Z045-2FBG676CES 27 mm x 27 mm
Pin configuration para sa XC7Z045-2FBG676CES (27 mm x 27 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7Z045-2FBG676CES.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7Z045-2FBG676CES ay nararapat para sa 6 aplikasyons: Industrial Machine Vision, Industrial Control and Automation, Network and Communications Equipment, High-Speed Data Acquisition, Embedded Edge Server, Communications and Storage Adapter.
Industrial Machine Vision
XC7Z045-2FBG676CES fits machine-vision systems that combine parallel sensor processing with embedded control. Its 350K programmable logic cells can accelerate pixel formatting, thresholding, filtering, and frame-buffer workflows, while the dual ARM Cortex-A9 cores at an 800 MHz operating point handle camera control, image analysis, and communications. Ethernet, USB OTG, SPI, and MMC/SD/SDIO connectivity support sensor, storage, and host interfaces. The principal benefit is hardware/software partitioning that reduces external accelerator requirements; the trade-off is careful power, thermal, and high-speed BGA design around the 27 mm by 27 mm 676-FCBGA package.
Inirekomenda
Industrial Control and Automation
XC7Z045-2FBG676CES is suitable for factory automation controllers requiring deterministic hardware logic alongside a conventional processor runtime. The programmable-logic fabric can implement timing-critical I/O, motion sequencing, encoder processing, or field-bus isolation, while the dual Cortex-A9 processor manages control logic, diagnostics, and data logging. The listed CAN bus, Ethernet, I2C, SPI, UART/USART, and USB OTG capabilities enable a compact controller around one programmable device. Compared with a processor-only controller, the FPGA fabric can execute parallel tasks with predictable timing; design effort must still cover decoupling, rail sequencing, thermal vias, and high-speed escape routing.
Inirekomenda
Network and Communications Equipment
XC7Z045-2FBG676CES can serve as an integrated networking controller where programmable throughput and embedded services are both important. The 350K-cell fabric can host packet classification, data-plane pipelines, or custom protocol interfaces, while the dual Cortex-A9 cores execute network services and management software. Ethernet and UART/USART interfaces support system connectivity, and USB OTG can support configuration, maintenance, or external peripheral paths. Consolidating these functions may reduce board count and simplify data exchange between software and hardware. The engineering trade-off is that multi-gigabit interfaces require meticulous signal-integrity analysis, and the 676-FCBGA needs a full escape-routing and thermal strategy rather than a simple low-speed layout.
Inirekomenda
High-Speed Data Acquisition
XC7Z045-2FBG676CES is appropriate for data-acquisition instruments requiring parallel preprocessing followed by higher-level software analysis. Custom logic can perform channel multiplexing, filtering, triggering, packing, and interface conversion at FPGA rates, while the Cortex-A9 subsystem formats results, controls storage, and communicates with a host. I2C and SPI are available for slower sensors and converters, while Ethernet and USB OTG can move larger data sets. This partitioning helps preserve deterministic acquisition timing and reduces the burden on the embedded processor. Board developers must verify supported memory interfaces, define compatible I/O standards, provide clean power rails, and budget thermal performance for sustained high-speed switching.
Inirekomenda
Embedded Edge Server
XC7Z045-2FBG676CES supports edge-server concepts that combine an embedded operating system with reconfigurable accelerator logic. The dual-core ARM Cortex-A9 processor can run networking, storage, and control services, while the FPGA fabric implements a custom accelerator for cryptography, compression, filtering, or protocol processing. The 800 MHz operating point and 350K logic cells provide a useful balance between general-purpose control and parallel throughput. Ethernet and USB OTG support external connectivity, while MMC/SD/SDIO can provide local storage access. The key engineering trade-off is software-to-hardware data movement, so designers should minimize boundary crossings and use dedicated interfaces or shared memory wherever the architecture permits.
Inirekomenda
Communications and Storage Adapter
XC7Z045-2FBG676CES can bridge storage, network, and embedded interfaces that would otherwise require several discrete devices. The programmable-logic section can adapt data widths, implement buffering, and isolate clock domains, while the Cortex-A9 system provides protocol management and configuration. Listed MMC/SD/SDIO, SPI, I2C, Ethernet, UART/USART, CAN bus, and USB OTG interfaces provide multiple integration paths for embedded storage and communications designs. Consolidating interfaces can reduce component count and make timing constraints easier to tailor in hardware. Conversely, high-speed routing and simultaneous processor and FPGA activity can increase power density, requiring validated power planes, thermal vias, and signal-integrity simulation.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7Z045-2FBG676CES — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7Z045-2FBG676I | XC7Z045-2FBG676E | XC7Z045-2FBG676C | XC7Z045-1FBG676CES | XC7Z045-1FBG676I |
|---|---|---|---|---|---|---|
| Package | 676-FCBGA, 27 mm x 27 mm | 676-FCBGA, 27 mm x 27 mm | 676-FCBGA | 676-FCBGA | 676-FCBGA | 676-FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Product Type | Zynq-7000 Kintex-7 FPGA system-on-chip | Zynq-7000 Kintex-7 FPGA system-on-chip | Zynq-7000 Kintext-7 FPGA system-on-chip | Zynq-7000 Kintex-7 FPGA system-on-chip | Zynq-7000 Kintex-7 FPGA system-on-chip | Zynq-7000 Kintex-7 FPGA system-on-chip |
| Special Ordering Suffix | CES | I | E | C | CES with -1 speed grade | I with -1 speed grade |
Pangunahing mga Pagkakaiba
- Higher listed processor operating point within the same XC7Z045 family (kumpara saXC7Z045-1FBG676CES)
- Closest same-package ordering variant with matching core architecture (kumpara saXC7Z045-2FBG676I)
- Integrated processing and programmable logic in one 676-FCBGA device (kumpara saXC7K410T-2FBG676I)
Talaan ng Disenyo
Treat the 676-FCBGA as a high-pin-count, high-speed design rather than a conventional two-row package. Use the AMD package files to define every ball assignment, preserve the prescribed escape-routing geometry, and validate layer transitions before placement. Differential and memory interfaces should be routed with continuous reference planes and without unnecessary vias. The published product attributes confirm the 27 mm by 27 mm package, but they do not reproduce the complete ball map, so the manufacturer package files must govern PCB layout.
Build the power tree around the listed 1.2 V and 3.3 V rails and verify sequencing, voltage tolerances, and transient requirements against the manufacturer datasheet and reference designs. Place bulk and high-frequency decoupling according to the recommended schematic, with the smallest capacitors adjacent to the relevant supply balls. Avoid routing return current through compromised power-plane splits, and account for the simultaneous processor and FPGA current draw when selecting regulators, copper area, and thermal vias.
Estimate junction temperature from actual logic utilization, processor workload, switching activity, I/O activity, ambient temperature, and PCB thermal resistance rather than relying on nominal FPGA power. A 27 mm by 27 mm FCBGA can concentrate heat beneath the die, making an uninterrupted ground plane and a distributed thermal-via array important. Validate the assembled board in its enclosure because airflow and neighboring components can materially change the result. Use the manufacturer power-estimation and thermal tools for the final thermal sign-off.
Do not treat the final suffix as cosmetic: the -1 and -2 ordering codes identify different speed grades, while the terminal suffix can identify different operating-temperature or qualification conditions. Confirm every required characteristic before changing the device. Also avoid choosing a superficially similar XC7Z045 in a 900-ball package, because a different ball count and footprint would require a complete PCB redesign rather than a drop-in substitution.
Impormasyon ng Pagsunod sa Kautusan
The available product records identify the device and package but do not provide component-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm these attributes using the applicable AMD product documentation and customer declaration.