Ürünler (21.000+)

STM32L452RCT6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L452RCT6

STM32L452RCT6 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L452RCT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor, operating at up to 80 MHz and delivering 100 DMIPS. It combines 256 KB of embedded Flash memory with 160 KB of SRAM in a 64-LQFP surface-mount package measuring 10 mm by 10 mm. The device is designed for compact, low-power embedded systems requiring substantial processing performance, analog control, communications, and flexible low-power operation. An ultra-low-power microcontroller is an integrated semiconductor that balances processing capability with minimized energy consumption. Within the product hierarchy, it is an Arm Cortex-M4 MCU, a 32-bit RISC microcontroller, and a member of the STM32L4 power-management-oriented product family. Low-power operating modes allow the processor to remain responsive while reducing energy use during idle, standby, shutdown, and battery-backed operation. This makes the device suitable for systems where average power consumption matters as much as peak processing performance. The STM32L452RCT6 integrates 52 I/O pins, a floating-point unit, USB device connectivity, digital filtering and analog conversion capabilities, and interfaces including CAN and QSPI. Its operating supply range of 1.71 V to 3.6 V supports low-voltage battery-powered designs. The manufacturer lists operating-temperature options from -40 °C to 85 °C or 125 °C, allowing selection according to environmental requirements. FlexPowerControl supports explicit control of low-power behavior, while Stop and Shutdown modes can reduce consumption when extended active processing is unnecessary. The Cortex-M4 architecture provides a strong balance of performance and efficiency for embedded control, sensor processing, communications, and human-interface tasks. Its floating-point unit accelerates mathematical operations that would otherwise require software emulation. The 256 KB Flash partition supports firmware and application code, while 160 KB of SRAM provides working memory for protocol stacks, data buffers, graphics, and control algorithms. This combination of memory capacity and peripheral integration reduces the need for external components in moderately complex embedded designs. Typical applications include low-power USB-connected sensors, industrial monitoring equipment, portable medical instruments, USB data loggers, energy-management controllers, compact human-interface panels, and connected embedded products. The USB device interface is particularly useful for configuration, data transfer, and firmware update workflows. CAN and QSPI connectivity broaden the design options for industrial networks and external flash-memory expansion. Developers can also use analog peripherals and digital filtering for direct acquisition and conditioning of sensor signals. Power-rail and decoupling decisions are critical in a 1.71 V to 3.6 V design. Place the required input, output, and bypass capacitors close to their corresponding pins, keep sensitive analog and communication traces away from high-current switching paths, and verify all timing constraints against the STM32L452xx manufacturer datasheet. Firmware should also use the device's clock, flash, and low-power configuration procedures rather than treating the MCU as a conventional 80 MHz processor. This product page combines manufacturer specifications, package and application guidance, sourcing workflows, and same-family replacement analysis. It also distinguishes documented characteristics from details that require confirmation with the manufacturer datasheet, helping engineers plan PCB reuse, firmware validation, power-budget analysis, and second-source qualification with greater confidence.

RFQ İletişim
STM32L452RET6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 512KB | ST
STM32L452RET6

STM32L452RET6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 512KB | ST

The STMicroelectronics STM32L452RET6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core with FPU, operating at up to 80 MHz with 512 KB of Flash and 160 KB of SRAM in a 64-pin LQFP (10x10 mm) package. It features a wide 1.71 V to 3.6 V supply range, USB Device, DFSDM, and integrated SMPS support, while consuming as little as 22 nA in Shutdown mode and 145 nA in VBAT mode. What is an ultra-low-power ARM Cortex-M4 microcontroller? It is a 32-bit processor core designed for embedded systems that balances computational performance with exceptionally low energy consumption. The Cortex-M4 includes a single-precision floating-point unit (FPU) and DSP extensions, enabling efficient math-intensive workloads. In the system hierarchy, a microcontroller (MCU) is a complete computer-on-a-chip integrating CPU, memory, and peripherals, and belongs to the embedded processor category within the broader semiconductor landscape. The STM32L4 series specifically targets energy-constrained applications, extending battery life in portable, wearable, and IoT devices. Key features of the STM32L452RET6 include seven low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, Shutdown), a 12-bit ADC with hardware oversampling, a 12-bit DAC, two comparators, and an operational amplifier. The device also integrates a true random number generator (TRNG), AES-256 hardware crypto accelerator, secure firmware install, and a 96-bit unique ID. Communication interfaces include USB 2.0 Full-Speed Device, three USARTs, two UARTs, three I2C, three SPI, one CAN, and one SDMMC. Technically, the STM32L452RET6 is built on a low-leakage 90 nm process and supports up to 100 DMIPS / 273 CoreMark. The integrated SMPS step-down converter generates the core voltage internally, further reducing active current. A flexible memory protection unit (MPU), FSMC external memory controller, and Quad-SPI (in higher-density siblings) support external memories. The device operates across -40 C to +85 C (or +125 C with the '6' high-temp suffix variant). Typical applications include industrial sensors, smart meters, healthcare devices, wearable electronics, asset trackers, and IoT endpoints. Its combination of ultra-low quiescent current, Cortex-M4 DSP performance, and rich analog peripherals makes it ideal for battery-powered metering, medical wearables, and remote sensor nodes. When designing, leverage Stop 2 mode with RTC for periodic wake-up duty cycles, place 100 nF decoupling on every VDD/VSS pair, and use STM32CubeMX + STM32CubeIDE for clock tree configuration, peripheral init, and power-mode tuning. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
STM32L452RET6P - 80MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics
STM32L452RET6P

STM32L452RET6P - 80MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics

The STMicroelectronics STM32L452RET6P is an ultra-low-power Arm Cortex-M4 32-bit microcontroller plus FPU, operating at up to 80 MHz with 100 DMIPS, integrating 512 KB of Flash and 160 KB of SRAM in a 64-pin LQFP (10x10 mm) package. It supports a 1.71 V to 3.6 V supply and is offered in -40 C to 85/125 C temperature grades for industrial and portable designs. An ultra-low-power MCU (ULP-MCU) is a microcontroller class engineered to minimise active and standby energy consumption through FlexPowerControl, multiple low-power modes (Shutdown, Standby, Stop, VBAT), and fast wakeup times. The STM32L4 family sits in ST's low-power hierarchy as Cortex-M4F -> STM32L4 series -> ultra-low-power MCU -> 32-bit microcontroller -> embedded MCU, balancing DSP capability, analog integration and energy efficiency for battery-powered edge devices. Key features include: Cortex-M4 with FPU and 100 DMIPS throughput; 512 KB single-bank Flash plus 160 KB SRAM; integrated SMPS step-down converter for core supply; USB 2.0 Full-Speed Device with embedded PHY and dedicated DFS (dedicated oscillator); two 12-bit ADCs, two 12-bit DACs, two op-amps and two comparators; rich connectivity including CAN 2.0B, two I2C, three SPI, four USART, two UART and one LPUART; plus 8x40 (4x40-segment) LCD driver and AES-256 hardware encryption. Shutdown current is 22 nA (5 wakeup pins), VBAT mode draws 145 nA, and Stop mode with RTC reaches about 1.1 uA typical. The device integrates a Cortex-M4F core with single-precision FPU, MPU and DSP extensions, plus ST's proprietary ART Accelerator for zero-wait-state Flash execution at full 80 MHz. Embedded SMPS, low-power voltage regulator, and independent RTC supply domain are partitioned to support advanced run/sleep/shutdown state machines without losing backup registers. Typical applications are fitness/wearable sensor hubs, smart-meter and asset-tracking endpoints, industrial sensor nodes, medical wearables, low-power PC peripherals with USB, audio playback paths leveraging the on-chip DFSDM and SAI, and home appliances with LCD display panels. When designing with STM32L452RET6P, prefer BOR-enabled power-up sequencing, route the SMPS inductor carefully on a 4-layer PCB to minimise radiated noise, and use ST's STM32CubeMX and HAL/LL libraries to accelerate peripheral configuration. Consider the higher-density STM32L4R/4A part if the application needs 1 MB Flash. This page synthesises distributor pricing, drop-in LQFP-64 alternatives and practical design notes not collated on the manufacturer datasheet, helping procurement and embedded engineers evaluate the STM32L452RET6P against contemporary ARM Cortex-M4F peers.

RFQ İletişim
STM32L452RET6TR - 80MHz 512KB Flash MCU | STMicroelectronics
STM32L452RET6TR

STM32L452RET6TR - 80MHz 512KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L452RET6TR is an ultra-low-power Arm Cortex-M4 32-bit microcontroller with FPU running at up to 80 MHz, featuring 512 KB of Flash memory and 160 KB of SRAM in a 64-pin LQFP (10x10 mm) package. It delivers 100 DMIPS at 80 MHz while drawing only 84 uA/MHz in run mode, making it one of the most power-efficient Cortex-M4 devices in the STM32L4 series. An ultra-low-power microcontroller (MCU) is a single-chip computer that integrates a processor core, non-volatile program memory (Flash), volatile data memory (SRAM), and a broad set of peripherals such as ADCs, DACs, timers, and serial interfaces. The STM32L452RET6TR sits in the STM32L4 family, which is part of the broader STM32 32-bit MCU portfolio, itself a member of the Arm Cortex-M ecosystem. Ultra-low-power MCUs are designed for battery-powered and energy-harvesting systems where every microamp matters, while still providing enough compute throughput for real-time control and signal processing. Key features include FlexPowerControl with a 1.71 V to 3.6 V supply range, 145 nA in VBAT mode for RTC and 32x32-bit backup registers, 22 nA in Shutdown mode with 5 wakeup pins, and a 12-bit ADC with hardware oversampling. The device also integrates a USB Device controller, DFSDM (digital filter for sigma-delta modulators), and multiple low-power timers, enabling always-on sensing with minimal energy cost. The STM32L452RET6TR is built on ST's ultra-low-leakage 90 nm process and uses a proprietary adaptive real-time memory accelerator to achieve 100 DMIPS at 80 MHz without wait states. Its analog peripherals include two 12-bit ADCs, one 12-bit DAC, and two ultra-low-power comparators, allowing direct interfacing with sensors and eliminating external signal-conditioning components in many designs. Typical applications include portable medical monitors, industrial IoT sensor nodes, smart metering, wearable fitness trackers, and battery-operated asset trackers. The combination of 512 KB Flash, 160 KB SRAM, and a rich analog front end makes it suitable for edge processing tasks such as filtering, FFT, and motor control. When designing with this device, pay close attention to the VDD/VBAT power architecture and the decoupling network. The 64-pin LQFP package provides 52 user I/O pins, so plan pin allocation carefully to avoid conflicts between the USB, ADC, and timer functions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, second-sourcing, and layout decisions.

RFQ İletişim
STM32L452REY6TR - Ultra-low-power ARM Cortex-M4 MCU | STMicroelectronics
STM32L452REY6TR

STM32L452REY6TR - Ultra-low-power ARM Cortex-M4 MCU | STMicroelectronics

The STM32L452REY6TR is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4 core with FPU. It operates at a maximum frequency of 80 MHz and delivers 100 DMIPS with 1.25 DMIPS/MHz, making it suitable for a wide range of battery-powered and energy-efficient applications. The device features 512 KB of Flash memory and 160 KB of SRAM, providing ample storage for complex firmware and data buffering. What is an ARM Cortex-M4 microcontroller? It is a 32-bit processor core designed for embedded systems, offering a balance of performance, power efficiency, and rich peripheral integration. The Cortex-M4 includes a floating-point unit (FPU) and DSP instructions, enabling efficient handling of mathematical and signal-processing tasks. In the system hierarchy, the STM32L452REY6TR sits at the application processor level, managing sensors, communication interfaces, and control loops, while interfacing with memory, power management, and external peripherals. Key features include an operating voltage range of 1.71V to 3.6V, multiple low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, and Shutdown) with current consumption as low as 28 µA in Stop 2 mode, and a rich set of peripherals including multiple USARTs, SPIs, I2Cs, USB 2.0 FS, CAN, and 12-bit ADCs/DACs. The device also integrates a true random number generator (TRNG), a CRC calculation unit, and a 12-channel DMA controller. The STM32L452REY6TR is built on ST's ultra-low-power technology, featuring a flexible power architecture with internal regulators and a low-power RTC. It supports a wide temperature range of -40°C to +85°C and is available in a 64-pin UFBGA package (Y6 suffix), which is ideal for space-constrained designs. The package measures 4.0 x 4.0 mm with a 0.5 mm pitch, offering excellent thermal performance and compactness. Typical applications include industrial sensors, smart meters, wearable devices, medical monitoring equipment, and IoT edge nodes. The combination of low power consumption, high performance, and extensive connectivity makes it a versatile choice for battery-operated systems that require advanced processing capabilities. When designing with this MCU, careful attention to power supply decoupling and PCB layout is essential to achieve the specified low-power performance. Use multiple decoupling capacitors close to the power pins and follow the layout guidelines in the datasheet to minimize noise and ensure reliable operation.

RFQ İletişim
STM32L452VCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L452VCI6

STM32L452VCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L452VCI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with floating-point unit, an 80 MHz operating frequency, 256 KB of Flash memory, and a 100-UFBGA 7 x 7 mm package. The device combines USB Device connectivity, DFSDM capability, analog functions, and embedded peripherals in a compact surface-mount package for power-conscious embedded systems. An ultra-low-power microcontroller is a semiconductor controller optimized to complete sensing, control, communications, and data-processing tasks while minimizing active and standby energy consumption. Within the product hierarchy, the STM32L452VCI6 is an Arm Cortex-M4 MCU, a 32-bit RISC microcontroller, and a member of STM32L4 power management-oriented embedded devices. Its USB and DFSDM interfaces distinguish it from basic low-power MCUs while its 7 x 7 mm package supports space-constrained designs. The principal verified features include an Arm Cortex-M4 processor with FPU, operation up to 80 MHz, and 256 KB of Flash storage. The Cortex-M4 architecture supports efficient embedded control and digital signal-processing workloads, while the FPU accelerates suitable floating-point calculations. USB Device support enables the MCU to communicate with a host computer or USB-equipped peripheral, and DFSDM provides a dedicated path for external analog data acquisition. The STM32L452VC family is positioned for applications requiring a balance between processing performance, low-power operation, analog connectivity, and compact packaging. Its 256 KB of Flash provides embedded program storage, while the STM32L4 platform is designed for energy-sensitive products that need more capability than a basic low-power MCU but do not require a high-performance application processor. Typical uses include USB-connected data acquisition equipment, low-power industrial sensing modules, compact audio or communication products, environmental monitoring devices, and portable instrumentation. DFSDM is particularly relevant when an application must acquire signals through an external sigma-delta converter while avoiding a general-purpose ADC for every input. The 100-UFBGA package also helps reduce board area where that benefit outweighs assembly and inspection complexity. Designers should verify the complete pin assignment, exposed-pad requirements, power sequencing, decoupling, and operating-temperature limits against the manufacturer datasheet before layout release. The 7 x 7 mm BGA footprint also demands assembly processes capable of inspecting fine-pitch solder joints. Firmware and peripheral configurations should be checked in detail because USB, DFSDM, clocking, and low-power modes can affect both board design and software architecture. This product page consolidates verified manufacturer and distributor information, distinguishes the target from same-family options, and adds application guidance, comparison parameters, and practical design cautions that are not organized together in the manufacturer datasheet.

RFQ İletişim
STM32L452VCT6 - Ultra-Low-Power ARM Cortex-M4 MCU | STMicroelectronics
STM32L452VCT6

STM32L452VCT6 - Ultra-Low-Power ARM Cortex-M4 MCU | STMicroelectronics

The STM32L452VCT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4 core with FPU. It operates at a maximum frequency of 80 MHz and delivers 100 DMIPS with 1.25 DMIPS/MHz, making it suitable for a wide range of battery-powered and energy-efficient applications. The device features 256 KB of Flash memory and 160 KB of SRAM, providing ample storage for complex firmware and data buffering. What is an ARM Cortex-M4 microcontroller? It is a 32-bit processor core designed for embedded systems, offering a balance of performance, power efficiency, and rich peripheral integration. The Cortex-M4 includes a floating-point unit (FPU) and DSP instructions, enabling efficient handling of mathematical and signal-processing tasks. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and programmable peripherals on a single chip, serving as the 'brain' of embedded systems. The STM32L4 series specifically targets ultra-low-power applications, extending battery life in portable and IoT devices. Key features of the STM32L452VCT6 include multiple low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, and Shutdown) with current consumption as low as 28 µA in Stop 2 mode with SRAM retention. It integrates a 12-bit ADC with 5 Msps, two 12-bit DACs, two comparators, and two operational amplifiers. Communication interfaces include I2C, SPI, USART, UART, LPUART, SAI, and CAN, along with USB 2.0 full-speed device/host/OTG. The device also features a true random number generator (TRNG), a CRC calculation unit, and a 96-bit unique ID. The STM32L452VCT6 is built on ST's ultra-low-power technology with an adaptive voltage scaling and a flexible power architecture. It includes a multi-speed internal RC oscillator (16 MHz) and a low-power internal oscillator (32 kHz), reducing external component count. The device supports external crystal oscillators for high-accuracy timing and includes a real-time clock (RTC) with calendar and alarm functions. The integrated LCD driver supports up to 8x40 segments, enabling direct connection to segment LCDs without external drivers. Typical applications include industrial sensors, smart meters, healthcare devices, wearable fitness trackers, and IoT edge nodes. Its ultra-low-power modes and rich analog peripherals make it ideal for battery-operated systems that require long operational life. The device also supports secure firmware updates with its read-out protection and memory protection unit, enhancing system security. When designing with the STM32L452VCT6, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 µF capacitor on the main VDD rail. Use the internal LDO or external SMPS step-down converter for optimal power efficiency. The VBAT pin should be connected to a backup battery or tied to VDD if not used. For low-power operation, configure unused GPIOs as analog inputs to minimize leakage current.

RFQ İletişim
STM32L462CEU6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L462CEU6

STM32L462CEU6 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L462CEU6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor, operating up to 80 MHz with 512 KB of Flash memory and USB device connectivity in a 48-pin UFQFPN package. The device combines a 100 DMIPS-class Cortex-M4 core with floating-point capability, 160 KB of SRAM, AES-256 hardware acceleration, and DFSDM support. An ultra-low-power microcontroller is designed to balance responsive computation with low energy consumption during active operation and low-power standby states. The STM32L4 family sits within the hierarchy of embedded MCU, 32-bit RISC microcontroller, low-power processor, and power-management-oriented semiconductor. These characteristics make the STM32L462CEU6 appropriate for compact products where USB connectivity, security, and efficient control processing are required in the same device. Principal features include an Arm Cortex-M4 core with FPU, a maximum operating frequency of 80 MHz, 512 KB of program Flash, 160 KB of SRAM, and USB device support. The hardware AES-256 accelerator supports encrypted data handling without offloading every cryptographic operation to software. DFSDM interfaces can work with external sigma-delta converters, helping designers build compact measurement or signal-conditioning systems. The STM32L462CEU6 belongs to the STM32L462xx family and uses an Arm Cortex-M4 RISC architecture. Its combination of high processing speed, low-power design, and dedicated peripherals reduces the need for separate USB controllers, security engines, or high-speed analog interface devices. Firmware can integrate USB communications, control logic, secure data storage, and sensor acquisition within a unified embedded architecture. Typical uses include USB-connected data acquisition, compact industrial controllers, secure access equipment, low-power sensor nodes, portable medical or diagnostic modules, and USB-connected human-interface devices. The 48-pin package provides a practical balance between peripheral access, board area, and manufacturing complexity for applications that need more I/O than an ultra-small MCU package can offer. When laying out the PCB, follow the manufacturer pinout, exposed-pad, decoupling, and thermal-via guidance exactly. Place bypass capacitors close to the supply pins, provide a continuous ground reference beneath the device where the package permits, and confirm USB impedance-controlled routing and ESD protection before release to production. This page consolidates the exact STM32L462CEU6 specifications, same-footprint alternatives, application guidance, and design checks engineers need when planning an ultra-low-power USB-capable embedded system. It also identifies where pin-level, electrical-limit, lifecycle, and supply details must be confirmed in the official STMicroelectronics documentation.

RFQ İletişim
STM32L471QGI6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32L471QGI6

STM32L471QGI6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32L471QGI6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 RISC core, operating at up to 80 MHz, with 1 MB of Flash memory and 128 KB of SRAM in a 132-pin UFBGA package measuring 7 x 7 mm. It supports a 1.71 V to 3.6 V supply range and is specified for -40°C to +85°C operation. A microcontroller is a programmable system-on-chip that integrates a CPU, memory, peripheral interfaces, and clocking into one device. The STM32L4 family belongs to the hierarchy microcontroller -> embedded processor -> programmable controller -> semiconductor. Its low-power design and broad peripheral integration make this class of device useful for compact embedded products that must balance processing capability, energy efficiency, and board area. Key features include the 80 MHz Arm Cortex-M4 core, 1 MB of Flash, 128 KB of SRAM, 12-bit conversion peripherals, and support for up to 109 I/O functions according to the listed product specifications. The STM32L471QGI6 also includes DFSDM capability, providing a digital filter for sigma-delta modulator-based signal acquisition. Its 132-UFBGA package supports a high pin count while occupying only 7 x 7 mm of board area. The device operates from a 1.71 V to 3.6 V supply and combines an Arm Cortex-M4 processor with integrated Flash and SRAM for compact firmware storage and working memory. Its industrial temperature range covers -40°C to +85°C, supporting applications in consumer equipment, industrial controls, connected sensors, portable instrumentation, and compact automation products. The broad supply range also allows deployment from low-voltage battery-powered systems through conventional 3.3 V equipment. Typical applications include low-power sensor nodes, industrial data-acquisition modules, portable measurement instruments, compact motor and process controllers, and connected embedded-control products. In each case, the 80 MHz processing rate supports responsive control and communication tasks, while DFSDM and the 12-bit conversion capabilities support analog-signal acquisition. The 7 x 7 mm UFBGA package is especially useful when component footprint and I/O density are important design constraints. PCB design requires careful attention to the 132-pin UFBGA escape routing and thermal management. Follow the manufacturer's land pattern, pin table, and recommended decoupling arrangement exactly; assign every ball from the package drawing rather than relying on inferred pin functions. For low-power operation, select the appropriate clock, peripheral, and sleep configuration in firmware, and confirm timing at the minimum operating voltage and maximum temperature. This product page consolidates the key device characteristics, sourcing information, application guidance, and engineering considerations needed to evaluate the STM32L471QGI6 before starting a compact embedded-control design.

RFQ İletişim
STM32L471RET6 - ARM Cortex-M4F 80MHz MCU | STMicroelectronics
STM32L471RET6

STM32L471RET6 - ARM Cortex-M4F 80MHz MCU | STMicroelectronics

The STMicroelectronics STM32L471RET6 is a high-performance ARM Cortex-M4F based microcontroller with floating-point unit (FPU) running at up to 80 MHz. It is part of the STM32L4 series, designed for ultra-low-power applications without compromising performance. The device integrates 512 KB of flash memory and 128 KB of SRAM, along with a rich set of peripherals including multiple 12-bit ADCs, DACs, comparators, op-amps, and advanced communication interfaces such as USART, SPI, I2C, CAN, and USB OTG FS. It is available in a 64-pin LQFP package (LQFP64) with a 10x10 mm body and 0.5 mm pitch. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine control units to wearable health monitors. In the system hierarchy, a microcontroller is a type of embedded processor, which falls under the broader category of integrated circuits (ICs) and semiconductors. The STM32L471RET6 is a mid-range MCU in the STM32L4 family, positioned between the lower-power STM32L0/L1 series and the higher-performance STM32F4 series, offering a balance of energy efficiency and processing capability. Key features of the STM32L471RET6 include its ultra-low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, and Shutdown) with current consumption as low as 100 nA in Shutdown mode. The device supports a wide supply voltage range of 1.71V to 3.6V, making it suitable for battery-powered applications. It also features a 12-bit ADC with hardware oversampling, a 12-bit DAC, and a true random number generator (TRNG). The FPU accelerates mathematical computations, which is beneficial for signal processing and control algorithms. The MCU is manufactured using ST's 90 nm process technology, enabling low dynamic power consumption. Technical depth: The STM32L471RET6 is built around the ARM Cortex-M4F core with DSP instructions and a single-precision FPU. It includes a memory protection unit (MPU) for enhanced security and reliability. The device supports up to 8x32-bit timers, including a low-power timer (LPTIM) that can operate in Stop mode. Communication peripherals include 3x USART, 3x SPI, 3x I2C, 1x CAN, 1x USB OTG FS, and 1x SAI (serial audio interface). The ADC has a resolution of 12 bits with up to 16 external channels and can operate at up to 5 Msps. The DAC has two channels with 12-bit resolution. The device also includes a flexible memory controller (FMC) for external memory expansion, supporting SRAM, PSRAM, NOR, and NAND flash. Typical applications include industrial sensors and actuators, smart meters, medical devices (e.g., glucose monitors, infusion pumps), wearable fitness trackers, IoT nodes, and portable instrumentation. The ultra-low-power modes and rich analog peripherals make it ideal for battery-operated devices that require long battery life and precise analog measurements. For example, in a smart meter, the STM32L471RET6 can handle metrology calculations, communication protocols, and display control while consuming minimal power in sleep mode between measurements. Design consideration: When designing with the STM32L471RET6, pay attention to the power supply decoupling. Place a 100 nF ceramic capacitor close to each VDD pin and a 4.7 uF capacitor at the main power input. For the VDDA pin, use a dedicated 1 uF capacitor to ensure stable analog performance. Also, configure the clock system carefully: the device can run from an internal 16 MHz HSI oscillator, but for precise timing, use an external 8 MHz crystal with appropriate load capacitors. The boot pins (BOOT0 and BOOT1) must be set correctly for the desired boot mode (flash, system memory, or SRAM).

RFQ İletişim
STM32L471VET6 - 80MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32L471VET6

STM32L471VET6 - 80MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32L471VET6 is an ultra-low-power, 32-bit microcontroller based on the Arm Cortex-M4 processor, operating at up to 80 MHz and packaged in a 100-pin LQFP measuring 14 x 14 mm. It provides 512 KB of embedded Flash memory, 128 KB of SRAM, and an integrated floating-point unit for efficient control-oriented and connected embedded processing. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The STM32L471VET6 belongs to the STM32L4 family of 32-bit Arm Cortex-M4 microcontrollers, combining low-power operation with substantial processing performance. Its architecture supports connected industrial, sensor, metering, and equipment-control applications where energy efficiency, real-time response, and a broad peripheral set are important. Principal device attributes include an 80 MHz maximum clock, 512 KB Flash, 128 KB SRAM, a 32-bit Arm Cortex-M4 core, and single-precision floating-point support. The 100-pin LQFP package exposes substantially more I/O than smaller MCU packages, making it suitable for systems requiring several communication peripherals, analog inputs, timers, and external memory interfaces. Digital signal processing benefits from the Cortex-M4 FPU while retaining deterministic embedded-control operation. The STM32L4 architecture balances processing capability with low-power modes for battery-operated and industrial systems. Its 512 KB Flash provides room for application firmware, boot code, configuration data, and protocol libraries, while 128 KB of SRAM supports working buffers and real-time control tasks. The exact supported operating voltage, clock tree, peripheral configuration, current consumption, and temperature limits must be selected from the manufacturer datasheet and device option-byte configuration. Typical applications include industrial sensor nodes, low-energy wireless equipment, building automation, portable instrumentation, motor and motion control, and connected measurement systems. The combination of 80 MHz processing, hardware floating-point capability, 512 KB Flash, and 100-pin I/O capacity supports complex control algorithms, local data processing, and communication protocol stacks while maintaining a compact surface-mount footprint. PCB design should preserve the pin assignment and decoupling requirements defined in the manufacturer datasheet. Place the required input and output capacitors close to their associated supply pins, route high-current and sensitive analog nets away from fast-switching nodes, and use a continuous ground plane. Confirm the exact pin names, alternate functions, oscillator requirements, and programming interface before releasing the PCB. This product page combines the manufacturer specifications, package information, sourcing references, drop-in alternatives, application guidance, and design considerations needed to evaluate the STM32L471VET6. It also distinguishes directly pin-compatible STM32L4 options from broader functional alternatives so engineers can assess replacement decisions against memory, peripheral, and firmware requirements.

RFQ İletişim
STM32L471VGT6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32L471VGT6

STM32L471VGT6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32L471VGT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with an operating frequency up to 80 MHz, 1 MB of Flash memory, a single-precision FPU, and a 100-pin LQFP package measuring 14 x 14 mm. It is designed for embedded systems requiring efficient Cortex-M4 processing, extensive mixed-signal connectivity, and low-power operation in industrial, consumer, medical, and connected-equipment applications. An ultra-low-power microcontroller is a semiconductor device optimized to perform control, measurement, communications, and data-processing tasks while minimizing energy consumption. The STM32L471 belongs to STMicroelectronics’ STM32L4 family, combining the Arm Cortex-M4 processor hierarchy with energy-efficient embedded control, analog peripherals, digital interfaces, and memory in one integrated device. Its architecture is suitable for designs that must balance processing capability, peripheral integration, board area, and power efficiency. The STM32L471VGT6 combines an 80 MHz Arm Cortex-M4 core with 1 MB of Flash and a single-precision floating-point unit. The Cortex-M4 processor supports the standard Arm single-precision data-processing instructions and a complete set of DSP instructions. This combination gives embedded developers a compact platform for control loops, signal processing, protocol handling, and floating-point calculations without requiring a separate DSP or math coprocessor. The device also includes digital and analog resources suited to mixed-signal embedded products. Its broad peripheral integration can reduce the number of discrete components on a compact PCB. The manufacturer’s STM32L471xx documentation identifies the family as an ultra-low-power Cortex-M4 MCU platform and confirms the 80 MHz maximum operating frequency and single-precision FPU architecture used by this ordering code. Typical applications include industrial sensor controllers, low-power data loggers, medical monitoring equipment, building controls, communication modules, compact motor-control systems, and battery-powered IoT devices. The 100-pin LQFP package provides ample external connectivity for mixed-signal boards, while the 1 MB Flash capacity provides room for larger firmware images, boot routines, diagnostics, and application logic. Designers should preserve the voltage and decoupling requirements specified in the manufacturer datasheet, place decoupling capacitors close to the supply pins, and maintain clear separation between sensitive analog inputs, high-speed digital signals, and switching-power circuitry. Firmware compatibility between related STM32L4 devices should be verified rather than assumed, particularly when changing memory configuration, peripheral availability, or boot behavior. This page organizes the STM32L471VGT6’s core identifiers, package information, sourcing path, and engineering guidance with practical context for PCB integration. It also distinguishes exact device attributes from data that must be confirmed in the manufacturer’s pin table and electrical-characteristics documentation before a new board is released to production.

RFQ İletişim
STM32L471ZGT6 - 1MB Flash 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L471ZGT6

STM32L471ZGT6 - 1MB Flash 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L471ZGT6 is an ultra-low-power 32-bit microcontroller based on the high-performance Arm Cortex-M4 RISC core with FPU, operating at frequencies up to 80 MHz, packaged in a 144-pin LQFP. The device integrates 1 MB of Flash, 128 KB of SRAM, and a rich peripheral set including CAN, USB, multiple UART/SPI/I2C interfaces, 12-bit ADCs, and a real-time clock for energy-sensitive embedded control applications. An ultra-low-power microcontroller (MCU) is a class of microprocessor that minimizes active and standby current consumption through techniques such as voltage scaling, multiple low-power operating modes, peripheral clock gating, and integrated DC-DC converters. The STM32L4 family extends this concept with the Cortex-M4 core plus DSP instructions and a single-precision floating-point unit, enabling digital signal processing alongside efficient power management. Within the broader taxonomy, the STM32L471ZGT6 sits in the hierarchy MCU -> Arm Cortex-M microcontroller -> ultra-low-power MCU -> power management IC ecosystem. Key features include a 1.8 V to 3.6 V supply range, batch acquisition mode for ADC, multiple low-power modes (Stop, Standby, Shutdown) drawing as little as a few hundred nanoamperes with RTC retention, a built-in 12-bit 5 Msps ADC, two DAC channels, USB 2.0 Full-Speed device/host, three I2C, three SPI, three USART plus UART, two CAN 2.0B, SDMMC, and a Crypt/AES-256 hardware accelerator. The 144-pin LQFP package supports ample GPIO for industrial control panels and sensor hubs. The STM32L471 uses a Cortex-M4 core with FPU and DSP extensions, providing 1.25 DMIPS/MHz and a CoreMark score in the hundreds, balancing DSP capability with extreme energy efficiency. The integrated LDO(Dragon) voltage regulator and switchable DC-DC buck converter allow dynamic trade-off between quiescent current and peak performance. Typical applications include industrial sensor nodes, wearable medical monitors, smart metering, battery-powered IoT gateways, and motor control subsystems where extended battery life and deterministic real-time response are simultaneously required. The 1 MB Flash enables on-board firmware with secure bootloaders, OTA stacks, and rich protocol libraries. When designing, always verify the supply decoupling network (1uF + 100nF + 4.7uF bulk) per ST AN4325 reference design and consider the 32 kHz LSE crystal selection for RTC accuracy. The 144-LQFP package simplifies layout but requires thermal relief for applications pushing >70% CPU duty. This page synthesizes verified distributor pricing, parametric drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet alone.

RFQ İletişim
STM32L475RCT3 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32L475RCT3

STM32L475RCT3 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L475RCT3 is an ultra-low-power 32-bit microcontroller built around the Arm Cortex-M4 processor with single-precision floating-point capability, operating at up to 80 MHz and integrating 256 KB of Flash memory. The device is offered in a 64-pin LQFP package measuring 10 mm by 10 mm and includes USB OTG and DFSDM connectivity. A microcontroller is a programmable system-on-chip that combines a processor core, memory, and peripherals such as GPIO, timers, serial interfaces, and analog blocks. The STM32L4 family belongs to the broader embedded-controller hierarchy and is designed for low-power applications that require more processing capability than simple 8-bit or 16-bit controllers. Its Cortex-M4 architecture supports efficient digital signal processing and floating-point calculations while retaining a broad embedded software ecosystem. Three headline features distinguish the STM32L475RCT3: an 80 MHz Arm Cortex-M4 core, 256 KB of embedded Flash, and a 64-pin LQFP package. The Cortex-M4 processor includes a single-precision FPU and DSP instructions, making the MCU suitable for control algorithms, audio-oriented processing, and sensor acquisition. USB OTG expands the available host or device connectivity, while the DFSDM peripheral supports digital filtering and signal acquisition tasks. The STM32L475 device family emphasizes low-power operation without limiting real-time processing capability. At the system level, Flash provides executable program storage while the MCU integrates an Arm Cortex-M4 core, memory, communication peripherals, and low-power operating modes on one package. This consolidation reduces component count and makes the device appropriate for compact embedded systems that must process data locally while limiting energy use. Typical uses include industrial sensing, connected industrial equipment, medical monitoring devices, USB-connected data acquisition, portable instruments, and low-power edge nodes. In each case, the 80 MHz core can execute control and signal-processing functions, while low-power modes support systems that spend substantial time idle or operating intermittently. PCB implementation must preserve the 64-LQFP footprint, signal integrity, and power-delivery requirements shown in the manufacturer datasheet. Keep decoupling close to supply pins, route sensitive analog and clock signals away from fast switching nodes, and confirm toolchain, debug-probe, bootloader, and peripheral support before committing the firmware architecture. This page combines the manufacturer device specifications with practical sourcing guidance, drop-in alternatives, application guidance, and design notes. These engineering-oriented details help evaluate the STM32L475RCT3 beyond a basic catalog description and support faster design, purchasing, and assembly decisions.

RFQ İletişim
STM32L475VCT6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L475VCT6

STM32L475VCT6 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L475VCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with a maximum operating frequency of 80 MHz, 256 KB of embedded Flash memory, and a 100-lead LQFP package measuring 14 x 14 mm. It also integrates a single-precision floating-point unit, DSP instructions, USB OTG, and DFSDM capability for compact, low-power embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32L4 family belongs to the Arm Cortex-M4 microcontroller hierarchy, combining real-time control performance with low-power operation. Within this family, the STM32L475VC device targets applications requiring a balance of processing throughput, memory capacity, connectivity, and analog signal acquisition. The Cortex-M4 core operates at up to 80 MHz and supports single-precision floating-point calculations and a full set of DSP instructions. Its 256 KB Flash memory provides 256K x 8 storage, while the integrated USB OTG interface supports connected USB applications. DFSDM capability is useful for direct digital conversion of signals from sigma-delta modulators, reducing the need for separate analog front-end components. The STM32L475VCT6 combines conventional MCU processing with dedicated communication and signal-processing peripherals. USB OTG supports dual-role, device, or host-oriented designs when the board design and firmware support the required configuration. DFSDM can reduce signal-chain size in precision acquisition systems, while the Cortex-M4 DSP and FPU instructions accelerate filtering and control calculations. These features support an efficient architecture without requiring a separate DSP or communications processor. Typical uses include industrial monitoring, portable medical instruments, low-power sensor nodes, USB-connected data acquisition, embedded control systems, and consumer devices with local signal processing. The device is particularly suitable when firmware must perform control-loop work, data conditioning, and USB communication in a single microcontroller. Its 100-pin LQFP package also provides a practical choice for prototype boards and designs requiring a generous pin count. PCB implementation should preserve the LQFP-100 land pattern, power and decoupling topology, clock stability, and exposed signal-routing clearances described by the manufacturer. Use the pin-description and alternate-function tables in the manufacturer datasheet when assigning ports, communication signals, analog inputs, and debug functions. Firmware migration is simplified within supported STM32L4 toolchains, but board-level peripheral assignments still require verification against the final schematic. This page consolidates the principal device characteristics, package information, qualified drop-in alternatives, and practical design guidance into one engineering reference. It also identifies where detailed electrical limits or pin assignments must be confirmed in the official STM32L475xx datasheet before a production design is released.

RFQ İletişim
STM32L475VGT6 - 1MB Flash Cortex-M4 MCU, 100-LQFP | STMicroelectronics
STM32L475VGT6

STM32L475VGT6 - 1MB Flash Cortex-M4 MCU, 100-LQFP | STMicroelectronics

The STMicroelectronics STM32L475VGT6 is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, 1 MB of Flash, 128 KB of SRAM, and 80 MHz maximum CPU clock, housed in a 100-pin LQFP (14x14 mm) package. It targets battery-powered and energy-harvesting embedded systems where both DSP-class performance and microamp-level quiescent current are required. A microcontroller (MCU) is a single-chip integrated circuit containing a processor core, program/data memory, and programmable peripherals that govern a specific embedded function. The STM32L475VGT6 is a member of the STM32L4 ultra-low-power family, which sits within the broader STM32 32-bit MCU portfolio and is engineered around ST's 110 nm ultra-low-leakage process with adaptive real-time (ART) accelerator. The Cortex-M4 core implements the ARMv7-M architecture with single-precision FPU and DSP extensions, making the part a member of the ARM Cortex-M family that is hierarchically classed as an embedded microcontroller -> 32-bit MCU -> semiconductor IC. Key features include a wide 1.71 V to 3.6 V supply range, batch-collecting 12-bit 5 Msps ADC, two 12-bit DACs, two op-amps, two comparators, USB 2.0 OTG full-speed (with internal PHY), CAN 2.0B, SDMMC, SAI, DFSDM, multiple timers, and a true random number generator (TRNG) for security. Seven main low-power modes (Low-power Run, Sleep, Low-power Sleep, Stop 0/1/2, Standby, Shutdown) bring the typical Stop-mode current down to the microampere range and Standby/Shutdown to the nanoampere range, enabling multi-year battery life when paired with an energy-aware application design. The architecture combines the Cortex-M4 DSP+FPUs with ST's ART Accelerator (instruction cache + pre-fetch) and an MPU, allowing sustained 100 DMIPS performance while maintaining ultra-low dynamic power. An embedded voltage regulator supports dynamic voltage scaling through the PDR1 (power-down) and LP regulator paths, decoupling core voltage from the external supply. Typical applications include wearable fitness/health monitors, smart-metering and home/building automation nodes, industrial sensor hubs, medical point-of-care devices, low-power wireless IoT gateways, asset trackers, and USB-powered human-interface peripherals. The integrated USB OTG FS removes the need for an external PHY in many HID/CDC designs. When designing with the STM32L475VGT6, follow the reference manual's decoupling and layout guidance (one 100 nF per VDD pair, one bulk 4.7 uF on the regulator input) and place the HSE crystal traces within the documented loading and guard-band limits. Selecting the right low-power pair must also consider whether the application can tolerate the wake-up latency of Stop 2 / Standby modes versus the higher autonomy of Low-power Run.

USD $5,20 İletişim
STM32L476QEI6 - 80MHz 512KB Cortex-M4 MCU | STMicroelectronics
STM32L476QEI6

STM32L476QEI6 - 80MHz 512KB Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L476QEI6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M4 processor operating up to 80 MHz, with 512 KB of Flash memory, 128 KB of SRAM, and a 132-pin UFBGA package measuring 7 x 7 mm. The device supports 1.8 V, 2.5 V, and 3.3 V operation, integrates an FPU, USB OTG, and LCD-oriented interfaces, and combines embedded-system performance with low-power design capabilities. An ultra-low-power microcontroller is an embedded semiconductor designed to execute firmware while minimizing energy consumption during active processing, sleep, and standby operation. The STM32L4 family belongs to the hierarchy microcontroller, embedded processor, Arm Cortex-M microcontroller, and low-power system-on-chip. This combination makes the STM32L476QEI6 suitable for compact systems where processing capability, peripheral integration, board area, and battery life must be balanced. Principal features include an 80 MHz Arm Cortex-M4 core with hardware floating-point support, 512 KB of programmable Flash, and 128 KB of SRAM. The 132-UFBGA package provides a dense 7 x 7 mm footprint for space-constrained designs. USB OTG and LCD support reduce the need for external interface controllers, while operation from 1.8 V, 2.5 V, and 3.3 V supplies allows integration with common low-voltage system rails. The Cortex-M4 architecture provides a 32-bit instruction set, deterministic interrupt handling, and efficient execution of control, communications, and signal-processing firmware. A hardware FPU accelerates floating-point calculations without relying entirely on software emulation. Integrated low-power modes are important in applications that spend substantial time idle, while the dense package supports wearable, portable, and embedded industrial products without requiring a large communications processor. Typical applications include connected sensor nodes, compact data loggers, medical monitoring equipment, industrial control modules, USB-connected portable devices, and human-interface systems with an LCD. In each case, the 512 KB Flash capacity accommodates a bootloader and embedded application, while SRAM supports working memory, protocol stacks, display buffers, and real-time control tasks. PCB design should account for the fine BGA pitch, ball assignment, exposed-pad or thermal requirements, and the placement of decoupling capacitors. Confirm the complete pin list, recommended land pattern, power-supply topology, and decoupling values in the STM32L476QE manufacturer datasheet before routing the PCB or assigning ball functions. This page consolidates the confirmed core, memory, package, interface, and sourcing characteristics into an engineering-focused product record. It also provides application guidance, selection criteria, design considerations, and a package-aware comparison framework for engineers evaluating the STM32L476QEI6 against other Arm Cortex-M4 microcontrollers.

RFQ İletişim
STM32L476RCT6 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32L476RCT6

STM32L476RCT6 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

STMicroelectronics STM32L476RCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating up to 80 MHz and delivering up to 100 DMIPS, with 256 KB Flash memory in a 64-LQFP 10 mm × 10 mm package. It is designed for compact embedded systems that require efficient processing, low-power operation, USB connectivity, LCD support, and flexible serial peripherals. An ultra-low-power microcontroller is a semiconductor device designed to complete control, sensing, communications, and data-processing tasks while minimizing energy consumption. The STM32L4 series belongs to the STM32 32-bit MCU family and combines an Arm Cortex-M4 core with embedded Flash, SRAM, security functions, analog resources, and communication interfaces. This hierarchy makes the device suitable for industrial controls, portable instruments, connected sensors, medical equipment, and human-interface systems where both processing performance and energy efficiency matter. The STM32L476RCT6 provides 256 KB Flash, a 32-bit RISC architecture, and operation up to 80 MHz. Its integrated USB OTG full-speed interface supports USB-connected peripherals and portable systems, while its LCD interface is useful for local graphical or segmented displays. The device also supports an external switched-mode power supply configuration, as indicated by the STM32L476xx family documentation, giving designers additional options for power-system implementation. Arm Cortex-M4 architecture provides efficient instruction execution and an integrated floating-point unit for control algorithms, digital filtering, and sensor processing. The STM32L476xx family supports up to 100 DMIPS, while the STM32L476RCT6 specifically combines that processing class with 256 KB Flash in a 64-pin LQFP package. The LQFP-64 footprint exposes more peripheral and general-purpose I/O than smaller packages while remaining suitable for leaded, high-temperature assembly processes. Typical applications include industrial sensor nodes, USB-connected data loggers, portable medical monitors, energy-management equipment, LCD-equipped control panels, and connected IoT devices. The combination of an 80 MHz core, USB OTG FS, LCD support, and low-power microcontroller positioning allows one device to consolidate several functions and reduce the number of discrete components in a compact embedded design. PCB implementation should follow the manufacturer’s LQFP-64 pinout and recommended decoupling, clock, reset, and power-layout guidance. Designers should verify the exact pin assignments, peripheral alternate functions, operating-voltage limits, and startup configuration in the STM32L476xx datasheet before releasing a PCB or firmware. This product page combines package, memory, core, interface, and application information with practical comparison data for STM32L476 family alternatives. It is structured to help engineers identify the correct memory-density or temperature-grade family member while preserving the shared STM32L476RCT6 board footprint and hardware design.

RFQ İletişim
STM32L476RET6 - 80MHz ARM Cortex-M4 MCU 512KB Flash | STMicroelectronics
STM32L476RET6

STM32L476RET6 - 80MHz ARM Cortex-M4 MCU 512KB Flash | STMicroelectronics

The STMicroelectronics STM32L476RET6 is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, operating at up to 80 MHz and delivering 100 DMIPS, integrating 512 KB of Flash and 128 KB of SRAM in a 64-pin LQFP (10x10 mm) package. This device targets battery-powered and energy-harvesting applications where active-mode performance and deep-sleep current must coexist. Core peripherals include USB 2.0 Full-Speed OTG, an integrated LCD controller (8x40 or 4x44 segments), three 12-bit ADCs (5 Msps), two 12-bit DACs, two operational amplifiers, and two comparators. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripheral interfaces. The Cortex-M4 family adds a single-precision FPU and DSP extensions, and the STM32L4 sub-family is optimized for ultra-low-power operation - in the hierarchy: ARM Cortex-M4 -> 32-bit MCU -> microcontroller -> semiconductor. STM32L4 devices extend battery life through multiple low-power modes (Shutdown, Standby, Stop with RTC), a built-in SMPS for core supply, and silicon-design techniques that push Stop-mode current down to a few microamps with RTC retention. Key features include a 1.7 V to 3.6 V supply range, 12 KB SRAM available in Standby with RTC for state retention, DMA1/DMA2 controllers, up to 83 I/O ports (5V-tolerant), and AES-256 / True Random Number Generator (TRNG) hardware accelerators. The integrated SMPS supports direct Li-ion cell operation, while the Vcore domain uses an internal voltage regulator for run/low-power modes. Architecturally, the Cortex-M4 core is paired with an ART Accelerator and an instruction cache that allows near-zero-wait-state execution from Flash at full 80 MHz. The bus matrix interconnects the core, DMA, AHB/APB peripherals, and memory banks to enable parallel transfers without starving the CPU. Peripherals such as timers (16-/32-bit), I2C, SPI, USART, UART, SAI, CAN 2.0B, SDMMC, and USB OTG FS share DMA channels, minimizing CPU overhead. Typical applications include wearable fitness/health bands, industrial sensor nodes (LoRaWAN / NB-IoT), portable medical meters, e-paper / LCD IoT displays, GPS trackers, low-power wireless sensor hubs, smart home battery devices (BLE/Zigbee hosts), and USB-equipped data loggers. The wide temperature range (-40C to +85C / +105C) and high integration reduce BOM cost and PCB area in these designs. When designing with this MCU, plan the decouple network carefully: place one 100 nF X7R cap per VDD pin, a 4.7 uF bulk on the main VBAT/VDD rail, and use the optional SMPS inductor (4.7 uH, low-DCR) according to the reference layout. Always populate NRST with the 10 kohm / 100 nF reset network shown in the datasheet to avoid spurious resets on power-up. This page synthesizes verified distributor pricing, drop-in same-package alternatives from the STM32L4 family, and practical design notes not consolidated in the manufacturer datasheet. Engineers gain concise selection context for energy-aware designs where Stop-mode current and 80 MHz headroom must coexist.

RFQ İletişim
STM32L476RGT3 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L476RGT3

STM32L476RGT3 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L476RGT3 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M4 core, floating-point unit, 80 MHz maximum operating frequency, 1 MB of Flash memory, and 128 KB of SRAM in a 64-LQFP 10 x 10 mm package. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one compact device. The STM32L4 family belongs to the hierarchy of 32-bit microcontroller, embedded processor, Arm Cortex-M microcontroller, and power management-aware embedded controller. These devices combine real-time control capabilities with low-power operating modes for industrial, consumer, medical, and connected equipment. The STM32L476RGT3 provides 100 DMIPS performance and includes USB OTG FS, LCD support, and an external switched-mode power supply option. Its 1 MB Flash supports larger embedded applications, while 128 KB of SRAM allows more complex working data. The 80 MHz Cortex-M4 core includes single-precision floating-point hardware for control loops, signal processing, and other arithmetic-intensive tasks without relying entirely on software floating-point routines. Its low-power architecture supports demanding embedded workloads while reducing energy use during idle and low-activity periods. Integrated communication and control peripherals reduce the need for external devices, making the MCU suitable for human-interface equipment, data acquisition, connected sensors, and compact industrial controllers. USB OTG FS is particularly useful for USB-connected portable products, configuration tools, and firmware update workflows. Typical uses include building automation controllers, portable medical monitors, USB data-acquisition equipment, industrial control panels, low-power sensor hubs, and connected human-interface devices. The 64-LQFP package also provides enough pins for external memories, display interfaces, analog inputs, and general-purpose I/O while remaining compatible with conventional leaded assembly and inspection processes. Designers should assign pinmuxing, clocks, low-power modes, and peripheral instances in the STM32CubeMX environment and confirm the selected peripheral pins in the manufacturer pinout and alternate-function tables. The USB data path requires careful routing and decoupling, while ADC and communications signals should be separated from noisy switching paths to improve signal integrity. This product page organizes the key MCU specifications, genuine same-package replacement options, application guidance, comparison parameters, and practical PCB design notes into one engineering-focused reference for evaluating the STM32L476RGT3.

RFQ İletişim
STM32L476RGT6 - 80MHz Cortex-M4 1MB Flash MCU | STMicroelectronics
STM32L476RGT6

STM32L476RGT6 - 80MHz Cortex-M4 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L476RGT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core with FPU running at up to 80 MHz (100 DMIPS), integrating 1 MB of Flash memory, 128 KB of SRAM, USB OTG FS, an LCD controller, and a flexible memory extension architecture, packaged in a 64-pin LQFP (10 x 10 mm) surface-mount package. An ultra-low-power microcontroller (MCU) is a complete computing system on a single chip that combines a processor core, memory, and peripherals while minimizing energy consumption. Within the power-management hierarchy, devices like the STM32L476 sit in the STM32L4 series, positioned above the STM32L0/L1 families and below the high-performance STM32F4/H7 lines, targeting battery-powered and energy-harvesting embedded systems. Key features include the Cortex-M4 with single-precision FPU and DSP instructions for efficient signal processing, six embedded SRAM banks totaling 128 KB with hardware parity checking, a ART accelerator for 0-wait-state execution from Flash, and dual-mode operation via the embedded ST-LINK-free boot loader. Dynamic efficiency is achieved through multiple low-power modes, flexible voltage scaling, and BOR-supervised operation from a 1.71 V to 3.6 V supply. The peripheral set covers USB OTG FS device/host, an 8x to 48x segment LCD driver, three 12-bit ADCs (5 MSPS), two 12-bit DACs, a DFSDM digital filter for sigma-delta modulators, multiple SPI/I2C/UART interfaces, SAI audio, CAN, Quad-SPI for external memory, AES and HASH cryptographic accelerators, an RNG, and a RTC with calendar. Typical applications include battery-powered meters and sensors, portable medical devices, IoT nodes, and human-machine interfaces with LCD displays. The combination of 1 MB Flash and ultra-low active current suits designs needing both code headroom and long battery life. Design consideration: leverage the flexible Stop mode with selectable wake-up peripherals, and budget Flash wait states versus VOS voltage scaling to balance 80 MHz performance against lowest dynamic current. This page synthesizes distributor pricing, drop-in alternatives, pin-compatibility notes, and practical design guidance not found in a single manufacturer datasheet.

RFQ İletişim
STM32L476VGT6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 1MB Flash | STMicroelectronics
STM32L476VGT6

STM32L476VGT6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 1MB Flash | STMicroelectronics

The STM32L476VGT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the high-performance Arm® Cortex®-M4 32-bit RISC core with floating-point unit (FPU). It operates at a frequency of up to 80 MHz, delivering 100 DMIPS performance while maintaining exceptional energy efficiency. The device features 1 Mbyte of Flash memory and 128 Kbytes of SRAM, making it suitable for a wide range of battery-powered and energy-conscious applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine controllers to wearable health monitors. The STM32L476VGT6 belongs to the STM32L4 series, which is optimized for ultra-low-power operation without compromising performance, positioning it within the broader hierarchy of embedded processors and controllers. Key features of the STM32L476VGT6 include its 80 MHz Arm Cortex-M4 core with FPU, 1 MB Flash, 128 KB SRAM, and a rich set of peripherals such as USB OTG FS, LCD controller, and digital filters for sigma-delta modulators (DFSDM). It supports a wide supply voltage range from 1.71V to 3.6V, enabling direct battery operation. The device also integrates advanced low-power modes, including Sleep, Low-power Run, and Stop modes, with typical current consumption in the microamp range, extending battery life in portable applications. Technically, the STM32L476VGT6 leverages ST's proprietary ultra-low-power technology, featuring multiple power domains and dynamic voltage scaling. The FPU accelerates mathematical computations, beneficial for signal processing and control algorithms. The device includes a 12-bit ADC with hardware oversampling, multiple timers, and communication interfaces (I2C, SPI, USART, CAN, and USB). The LCD controller supports up to 8x40 segments, ideal for direct display driving without external components. Typical applications include smart meters, medical devices (e.g., glucose monitors, hearing aids), industrial sensors, and IoT edge nodes. Its ultra-low-power consumption and rich analog peripherals make it ideal for battery-operated devices that require long operational life. The 100-pin LQFP package (14x14 mm) offers a compact footprint with ample I/O for complex designs. When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF bulk capacitor on the main supply. Also, utilize the low-power modes effectively by configuring the RTC and wakeup sources to minimize average current consumption.

RFQ İletişim
STM32L476ZGT6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32L476ZGT6

STM32L476ZGT6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32L476ZGT6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M4 processor, up to 80 MHz operating frequency, 1 MB of Flash memory, and 128 KB of SRAM in a 144-pin LQFP package measuring 20 mm by 20 mm. It combines 100 DMIPS compute performance with USB OTG FS, LCD support, an FPU, and an external switching-mode power supply option. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one compact device. The STM32L4 family belongs to the STM32 ultra-low-power portfolio and is designed for embedded systems requiring broad peripheral connectivity, deterministic control, and low-power operation. Within that hierarchy, the Cortex-M4 core provides general-purpose embedded processing while the STM32L476 device adds extensive connectivity and low-power peripherals. Principal features include up to 80 MHz operation, 100 DMIPS performance, a single-precision hardware FPU, 1 MB of Flash, 128 KB of SRAM, and USB OTG FS connectivity. The 144-pin LQFP package exposes substantially more I/O than smaller packages, making the device suitable for systems that need parallel interfaces, multiple communication peripherals, LCD control, or a high pin count. Its 20 mm by 20 mm body also provides adequate routing space for a multilayer PCB. The Cortex-M4 architecture combines a 32-bit RISC core with DSP extensions and the hardware floating-point unit. This allows efficient control-loop execution, digital filtering, audio-oriented signal processing, and other workloads that benefit from single-precision arithmetic. At the same time, the STM32L476 family supports low-power operating modes that help reduce energy consumption during idle and active-control phases in embedded products. Typical applications include industrial control and automation equipment, human-machine interfaces with LCD displays, USB-connected data loggers, connected sensors, building-control terminals, and compact embedded systems requiring both substantial memory and a large GPIO count. USB OTG FS can support peripheral connectivity, while the LCD interface and extensive pin availability simplify designs that otherwise require additional interface controllers. PCB design should follow the manufacturer pin-definition and land-pattern guidance for the 144-pin LQFP package. Place decoupling capacitors close to the appropriate supply pins, keep sensitive analog and high-speed routing away from switching nodes, and verify that the selected external components support the device's power and clock requirements. Firmware should also be qualified for the intended operating conditions rather than validated only in a nominal laboratory setup. This page combines the official device description and datasheet characteristics with application guidance, package considerations, and same-footprint alternatives for engineers evaluating an STM32L476 design. It is intended to accelerate part selection while keeping memory, core, package, and peripheral compatibility requirements explicit.

RFQ İletişim
STM32L486JGY6TR - Ultra-low-power ARM Cortex-M4F MCU | STMicroelectronics
STM32L486JGY6TR

STM32L486JGY6TR - Ultra-low-power ARM Cortex-M4F MCU | STMicroelectronics

The STM32L486JGY6TR is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4F core with FPU, operating at up to 80 MHz. It is part of the STM32L4 series, designed for high efficiency and long battery life in a wide range of applications. The device integrates 1 Mbyte of Flash memory and 128 Kbytes of SRAM, along with a rich set of peripherals including analog, digital, and communication interfaces. What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded systems, featuring a floating-point unit (FPU) for efficient handling of mathematical operations, and a memory protection unit (MPU) for enhanced security. The Cortex-M4F is part of the ARM Cortex-M family, which includes the M0, M0+, M3, M4, and M7 cores, each offering different performance and power trade-offs. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and peripherals on a single chip, enabling it to control electronic systems in applications ranging from consumer electronics to industrial automation. Key features of the STM32L486JGY6TR include its ultra-low-power modes (Sleep, Low-power run, Low-power sleep, Stop 0/1/2, Standby, and Shutdown), which are critical for battery-powered devices. It also features a 12-bit ADC with hardware oversampling, a 12-bit DAC, two comparators, and operational amplifiers. The device supports multiple communication interfaces: I2C, SPI, USART, UART, LPUART, SAI, CAN, USB OTG FS, and SDMMC. Additionally, it includes a true random number generator (TRNG), a CRC calculation unit, and a 96-bit unique ID. The STM32L486JGY6TR is manufactured using ST's 40nm process technology, which contributes to its low power consumption. The core operates at 1.8V to 3.6V, with a wide temperature range of -40°C to +85°C. The device is available in a 73-ball WLCSP package (0.4mm pitch), making it suitable for space-constrained designs. The package is lead-free and RoHS compliant. Typical applications include wearable devices, smart sensors, medical monitoring equipment, industrial sensors, and IoT edge nodes. The ultra-low-power modes and rich analog peripherals make it ideal for battery-operated devices that require long operational life. For example, in a wearable health monitor, the STM32L486JGY6TR can sample sensor data, process it with the FPU, and communicate via BLE (through an external module) while consuming minimal power. When designing with this device, pay attention to the power supply decoupling: place a 100nF capacitor close to each VDD pin and a 1uF capacitor on the main supply. Also, use the low-power modes effectively by configuring the RTC and wake-up sources to maximize battery life. The device supports a wide range of development tools, including STM32CubeMX and STM32CubeIDE, which simplify configuration and code generation.

RFQ İletişim