BTG70501EPLXUMA1 vs BTS70402EPGXUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTG70501EPLXUMA1 tarafından Infineon ve BTS70402EPGXUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTG70501EPLXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Switch Type | High-Side Power Switch (PROFET +2 12V) | — |
| Number of Channels | 1 | 4 |
| Input / Output Ratio | 1:1 | — |
| Çıkış Konfigürasyonu | N-Channel High-Side | High-side, N-channel MOSFET |
| Current Limit (Typ.) | 3 A | — |
| Supply Voltage Vcc Range | 2.7 V to 28 V | — |
| Load-Dump Withstand | [DATA_NEEDED: load-dump transient rating] | — |
| On-State Resistance (Typ) | [DATA_NEEDED: Rdson value] | — |
| Operating Temperature (Tj) | -40 C to +150 C | — |
| Diagnostic Functions | Open-load, short-to-GND, short-to-Vbat, overtemperature | — |
| Current Limit Switch (CLS) Mode | Yes (for ADAS / power distribution) | — |
| Paket | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Montaj Türü | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 (automotive) | — |
| MSL Seviyesi | [DATA_NEEDED: MSL rating] | — |
| RoHS Durumu | Compliant | — |
| Lead-Free | Yes | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonksiyon | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| İşletim Sıcaklığı Aralığı | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |