BTG70501EPLXUMA1 vs BTS70402EPGXUMA1 مقایسه
مقایسه دقیق کنار به کنار BTG70501EPLXUMA1 توسط Infineon و BTS70402EPGXUMA1 توسط Infineon. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | BTG70501EPLXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| برند | Infineon | Infineon |
| دسته‌بندی | Power MOSFET Drivers | Power MOSFET Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Switch Type | High-Side Power Switch (PROFET +2 12V) | — |
| Number of Channels | 1 | 4 |
| Input / Output Ratio | 1:1 | — |
| پیکربندی خروجی | N-Channel High-Side | High-side, N-channel MOSFET |
| Current Limit (Typ.) | 3 A | — |
| Supply Voltage Vcc Range | 2.7 V to 28 V | — |
| Load-Dump Withstand | [DATA_NEEDED: load-dump transient rating] | — |
| On-State Resistance (Typ) | [DATA_NEEDED: Rdson value] | — |
| Operating Temperature (Tj) | -40 C to +150 C | — |
| Diagnostic Functions | Open-load, short-to-GND, short-to-Vbat, overtemperature | — |
| Current Limit Switch (CLS) Mode | Yes (for ADAS / power distribution) | — |
| بسته‌بندی | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| نوع نصب | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 (automotive) | — |
| سطح MSL | [DATA_NEEDED: MSL rating] | — |
| وضعیت RoHS | Compliant | — |
| Lead-Free | Yes | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| عملکرد | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| محدوده دمای کاری | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |