DRV8873HPWPR vs DRV8434ARGER Karşılaştırma
Ayrıntılı yan yana karşılaştırma DRV8873HPWPR tarafından Texas Instruments ve DRV8434ARGER tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ Aktif
Özellik Karşılaştırması
| Parametre | DRV8873HPWPR | DRV8434ARGER |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Motor Drivers | Motor Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Motor Type | Brushed DC | Bipolar stepper |
| Ağ Yapısı | H-Bridge (4 N-channel MOSFETs) | — |
| Supply Voltage (VM) | 4.5 V to 38 V | 4.5 V to 48 V |
| Absolute Maximum VM | 40 V | — |
| Peak Output Current | 10 A | — |
| Continuous Output Current | 3.5 A (with proper PCB thermal design) | — |
| RDS(on) per HS+LS FET | [DATA_NEEDED: typical mOhm at 25 C] | — |
| Integrated Current Sensing | Yes (IPROPI analog output) | — |
| Control Interface | PH/EN (hardware) or PWM, selectable via MODE | Step/Direction + SPI |
| Current Regulation | Yes (Smart-tune or fixed off-time) | — |
| İşletim Sıcaklığı | -40 C to +125 C | -40 C to +125 C |
| Paket | 24-pin HTSSOP (PWP) with PowerPAD | VQFN-24 (RGE) 4x4 mm with thermal pad |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 3 (168 hr / 260 C) | 2 (1 year floor life) |
| RoHS Durumu | Compliant | Compliant |
| AEC-Q100 | Not qualified (use DRV8873-Q1 for automotive) | — |
| Number of H-Bridges | — | 2 |
| Çıkış Konfigürasyonu | — | NMOS H-bridge |
| Full-Scale Output Current | — | 2.5 A per phase (peak) |
| RMS Output Current | — | 1.5 A per phase (typical) |
| Microstepping Resolution | — | Full-step to 1/256 step |
| Current Sensing | — | Integrated (no external sense resistor) |
| Stall Detection | — | Yes (GPIO output) |
| Decay Mode | — | Smart Tune (mixed decay) |
| Sleep Pin | — | Yes (nSLEEP, active low) |
| Fault Pin | — | Yes (nFAULT, active low, open-drain) |
| Protection Features | — | UVLO, OCP, OVP, OTP, open load, stall |