DRV8873HPWPR vs DRV8434ARGER مقایسه
مقایسه دقیق کنار به کنار DRV8873HPWPR توسط Texas Instruments و DRV8434ARGER توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ فعال
مقایسه مشخصات
| پارامتر | DRV8873HPWPR | DRV8434ARGER |
|---|---|---|
| برند | Texas Instruments | Texas Instruments |
| دسته‌بندی | Motor Drivers | Motor Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Motor Type | Brushed DC | Bipolar stepper |
| توپولوژی | H-Bridge (4 N-channel MOSFETs) | — |
| Supply Voltage (VM) | 4.5 V to 38 V | 4.5 V to 48 V |
| Absolute Maximum VM | 40 V | — |
| Peak Output Current | 10 A | — |
| Continuous Output Current | 3.5 A (with proper PCB thermal design) | — |
| RDS(on) per HS+LS FET | [DATA_NEEDED: typical mOhm at 25 C] | — |
| Integrated Current Sensing | Yes (IPROPI analog output) | — |
| Control Interface | PH/EN (hardware) or PWM, selectable via MODE | Step/Direction + SPI |
| Current Regulation | Yes (Smart-tune or fixed off-time) | — |
| دمای کاری | -40 C to +125 C | -40 C to +125 C |
| بسته‌بندی | 24-pin HTSSOP (PWP) with PowerPAD | VQFN-24 (RGE) 4x4 mm with thermal pad |
| نوع نصب | Surface Mount | Surface Mount |
| سطح MSL | 3 (168 hr / 260 C) | 2 (1 year floor life) |
| وضعیت RoHS | Compliant | Compliant |
| AEC-Q100 | Not qualified (use DRV8873-Q1 for automotive) | — |
| Number of H-Bridges | — | 2 |
| پیکربندی خروجی | — | NMOS H-bridge |
| Full-Scale Output Current | — | 2.5 A per phase (peak) |
| RMS Output Current | — | 1.5 A per phase (typical) |
| Microstepping Resolution | — | Full-step to 1/256 step |
| Current Sensing | — | Integrated (no external sense resistor) |
| Stall Detection | — | Yes (GPIO output) |
| Decay Mode | — | Smart Tune (mixed decay) |
| Sleep Pin | — | Yes (nSLEEP, active low) |
| Fault Pin | — | Yes (nFAULT, active low, open-drain) |
| Protection Features | — | UVLO, OCP, OVP, OTP, open load, stall |