EPC1PC8CC vs EPC1PC8 Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC1PC8CC tarafından Intel ve EPC1PC8 tarafından AlteraAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC1PC8CC | EPC1PC8 |
|---|---|---|
| Marka | Intel | Altera |
| Kategori | Memory ICs | Memory ICs |
| Yaşam Döngüsü Durumu | Obsolete | Obsolete |
| Bellek Boyutu | 1 Mbit (1,048,576 bits) | 1 Mbit (1,048,576 bits) |
| Bellek Türü | EPROM (OTP, UV-erasable window optional) | OTP Configuration PROM (Non-volatile) |
| Fonksiyon | FPGA Configuration PROM | — |
| Configuration Interface | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) | Altera proprietary serial (DATA, DCLK, OE, nCS) |
| Supply Voltage VCC | 3.0 V to 3.6 V (typical 3.3 V) | — |
| Maximum DCLK Frequency | 17.6 MHz (17.6 Mb/s effective bitstream rate) | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: full industrial range from datasheet] | — |
| Paket | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) | 8-pin PDIP (8-PDIP, 300 mil) |
| Montaj Türü | Through-Hole (DIP socketable) | Through-Hole (THT) |
| Cascade Support | Not supported in DIP-8 package (nCASC pin not exposed) | — |
| Programming Interface | JTAG via Altera Quartus / Quartus Prime ByteBlaster | — |
| Error Detection | Built-in CRC during configuration transfer | — |
| MSL Seviyesi | 1 (unlimited floor life) | [DATA_NEEDED: moisture sensitivity level] |
| Lead-Free / RoHS | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant | — |
| Compatible FPGA Families | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria | — |
| Pin Sayısı | 8 | — |
| Supply Voltage (VCC) | — | 5.0 V (typical) |
| Programmability | — | One-Time Programmable (OTP) |
| Target FPGAs | — | ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A |
| Pin Pitch | — | 2.54 mm (0.100 in) |
| İşletim Sıcaklığı | — | 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range] |
| Programming Hardware | — | Altera MasterBlaster / ByteBlaster (legacy programmer) |
| Configuration Mode | — | Serial (1-bit data, 1-bit clock) |
| RoHS Durumu | — | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free | — | [DATA_NEEDED: lead-free / SnPb plating] |