MW7IC2240NR1 vs MW7IC2240NBR1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma MW7IC2240NR1 tarafından NXP Semiconductors ve MW7IC2240NBR1 tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | MW7IC2240NR1 | MW7IC2240NBR1 |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | RF Amplifiers | RF Amplifiers |
| Yaşam Döngüsü Durumu | Aktif | Obsolete |
| Fonksiyon | RF Power Amplifier (W-CDMA, multi-stage) | — |
| Technology | LDMOS (Laterally Diffused MOSFET) | RF LDMOS (multi-stage integrated) |
| Frequency Range | 2110 MHz to 2170 MHz (usable 2000-2200 MHz) | 2110 MHz to 2170 MHz (usable 2000-2200 MHz) |
| Average Output Power | 4 W (W-CDMA, 28 V) | — |
| Power Gain (Min) | 15 dB | — |
| Drain Supply Voltage | 24 V to 32 V (28 V typical) | — |
| Input VSWR | 5:1 | 5:1 |
| Output VSWR | 5:1 | 5:1 |
| Nominal Impedance | 50 ohm (DC-blocked input, >3 ohm output) | 50 ohm (on-chip matched) |
| Spurious Emissions | Below -60 dBc from 100 mW to 10 W CW Pout | — |
| On-Chip Matching | Yes (input 50 ohm DC-blocked, partial output) | — |
| Quiescent Current Compensation | Integrated with temperature compensation | — |
| Enable Function | Yes | — |
| Paket | TO-270 WBL-16 (TO-270WB16), 16-pin ceramic | TO-272 WB-16 (over-molded plastic, 16-lead) |
| Operating Modulation Formats | W-CDMA, TD-SCDMA, LTE-FDD, multi-carrier | — |
| Montaj Türü | Surface Mount / flange mount with ground pad | Surface Mount |
| Modulation / RF Type | — | W-CDMA (also TD-SCDMA, LTE) |
| Output Power (Average) | — | 4 W Avg. @ 2112.5 MHz, single-carrier W-CDMA |
| Supply Voltage (VDD) | — | 28 V (rated 24 V to 32 V operation) |
| Quiescent Current Stage 1 (IDQ1) | — | 90 mA |
| Quiescent Current Stage 2 (IDQ2) | — | 420 mA |
| Minimum Gain | — | 15 dB (typical 30 dB) |
| P1dB (Output) | — | 46 dBm (per distributor listing) |
| Terminal Finish | — | Matte Tin (Sn) |
| Package Body Material | — | Plastic / Epoxy |
| Operating Mode | — | 100% PAR tested for W-CDMA-like signals |
| RoHS Durumu | — | [DATA_NEEDED: RoHS compliance] |