Renesas Electronics

DG412DVZ - Quad SPST CMOS Analog Switch | Renesas

MPN: DG412DVZ ✓ Aktif
35 ohms Rds(on) 16-TSSOP Package
MOQ: 1 |

DG412DVZ Genel Bakış

Renesas Electronics DG412DVZ is a monolithic quad CMOS analog switch containing four independent single-pole, single-throw (SPST) switches configured as normally open devices. The 16-TSSOP package provides a compact surface-mount solution for routing low-voltage analog or digital signals. Each switch has a 1:1 signal configuration and an on-resistance specified at 35 ohms by the product listing.

An analog switch is a semiconductor interface that connects or isolates circuit nodes under digital control. The DG412 belongs to the broader hierarchy of CMOS analog switches, multiplexer and demultiplexer devices, and signal-routing integrated circuits. Its four independent SPST channels allow separate control of four signal paths instead of forcing the designer to use one common multiplexer configuration. This makes the device suitable for analog measurement, test, communication, and control systems where independent routing is required.

The key verified features are four switch circuits, 1:1 signal routing, 35-ohm on resistance, normally open SPST construction, CMOS-compatible control, and a 16-pin TSSOP package. The normally open architecture keeps each switched path disconnected until its corresponding control input activates it. This behavior is useful when signal integrity, fault isolation, or predictable default states matter. The compact TSSOP outline also supports denser layouts than a larger through-hole package.

Renesas describes the DG412 family as monolithic CMOS analog switches with four independent SPST channels and TTL- and CMOS-compatible digital inputs. The DG412 series is positioned as a drop-in replacement for the earlier DG211 and DG212 device families. Its independent architecture separates each analog path while providing digital control from common logic systems, which is important in instrumentation and embedded test equipment.

Typical uses include signal isolation between a sensor and an analog-to-digital converter, channel selection in automated test systems, routing control signals between circuits, and disconnecting unused loads. In each case, the 35-ohm on resistance influences signal attenuation and drive requirements. Engineers should also verify the complete electrical limits and control timing from the manufacturer datasheet before operating signals near the device's specified limits.

PCB implementation requires care because analog switches can inject charge into high-impedance nodes and can respond to fast control-edge transients. Place the device close to the switched signal, provide a stable ground reference, and route control inputs away from sensitive analog traces. Avoid long unprotected control wires, and use the pin-description table in the manufacturer datasheet when assigning every TSSOP connection.

This page organizes the verified DG412DVZ product identity, package information, purchasing path, technical comparisons, and replacement guidance into one engineering-focused reference. It also identifies where application-specific electrical requirements must be checked against the DG411/DG412/DG413 datasheet before a board design is released for production.

Drop-in alternatifler için DG412DVZ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller DG412DVZ (aynı form faktörü ve ayağa oturma) — farklı olan Mounting Type, Package, Switch Configuration.

Maxim Integrated
Mounting Type: Through-hole
Package: PDIP-16, 0.3 inch
Switch Configuration: 4 independent SPST
İle Karşılaştır DG412DVZ →

DG412DVZ-T

✅ Yerleştirme
📦 16-TSSOP
Same DG412 electrical configuration and 35-ohm on resistance; only the catalog packing suffix changes, with 0% difference in the identified switch and package characteristics.

📋 Katalogda Olmayan Referans Alternatifi

DG411DVZ

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 16-TSSOP
Same four-channel SPST CMOS switch topology and 16-TSSOP class, but a different DG411 series; individual voltage, timing, and on-resistance limits must be compared before substitution.

📋 Katalogda Olmayan Referans Alternatifi

DG411DVZ-T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 16-TSSOP
Same DG411 SPST topology and 16-TSSOP package as DG411DVZ, with a packing suffix; it remains a different series from DG412 and therefore requires electrical-limit verification.

📋 Katalogda Olmayan Referans Alternatifi

DG412DVZ Maksimum Değerlendirmeler & Elektriksel Özellikler

Number of Switch Circuits 4 circuits
Switch Configuration 1:1 SPST
On Resistance 35 ohms
Number of Terminals 16 terminals
Paket 16-TSSOP
Montaj Türü Surface mount
Technology CMOS
Control Compatibility TTL-compatible and CMOS-compatible digital inputs
Default Contact State Normally open
Channel Independence 4 independent SPST switches
Temperature Grade Industrial

DG412DVZ 16-tssop Pin Yapısı Kılavuzu

DG412DVZ (16-tssop paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-tssop paket pin çizelgesi için DG412DVZ

Ayrıntılı pin çıkış verisi mevcut değil: DG412DVZ.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

DG412DVZ için uygundur 6 uygulamas: Sensor Signal Isolation, ADC Channel Routing, Automated Test Systems, Communication Signal Routing, Battery-Powered Instrumentation, Control and Peripheral Routing.

🧩

Sensor Signal Isolation

The DG412DVZ fits sensor-interfaces that need several analog paths to be connected or disconnected independently. Its four normally open SPST switches prevent one sensor branch from disturbing another when inactive, while the 35-ohm on resistance provides a defined series impedance in the closed state. Place the switch close to the sensor interface and use the lowest-impedance return path available. Check leakage, charge injection, and off isolation against high-impedance sensor requirements in the Renesas datasheet.

⚡

ADC Channel Routing

DG412DVZ can route four independently controlled sources toward an analog-to-digital converter, allowing unused channels to remain disconnected from the conversion node. The 1:1 configuration preserves signal polarity, and the 35-ohm on resistance must be included when calculating divider ratios, source loading, and acquisition settling. For high-resolution conversions, verify injected charge, switch resistance matching, leakage, and switching timing from the manufacturer datasheet before selecting acquisition times.

🏭

Automated Test Systems

The four independent SPST channels make DG412DVZ useful in automated test equipment for connecting test stimuli to several nodes under digital control. Normally open contacts establish a defined disconnected state between measurements, reducing unwanted cross-connection. The 35-ohm on resistance affects drive level and sensing accuracy, so account for it in the test-path budget. Control timing also determines how quickly a new path may be trusted after switching.

🌐

Communication Signal Routing

DG412DVZ can provide independent connect and disconnect functions in low-speed communication equipment, especially where a transmitter, receiver, or termination network must be isolated during alternate operating modes. The 1:1 SPST topology does not reverse signal polarity, and the 35-ohm on resistance influences insertion loss and logic-level loading. Keep the analog traces short, provide a continuous ground reference, and verify whether control-edge transients require external filtering for the signal being routed.

📱

Battery-Powered Instrumentation

The normally open DG412DVZ channels can disconnect loads and inactive circuit sections to reduce unintended current flow in battery-powered instruments. The four independent controls provide targeted isolation rather than shutting down an entire analog path at once. The 35-ohm on resistance should be evaluated for the maximum switched current and logic-level margin. Because switched nodes can transient when control inputs change, use clean control drive and confirm leakage behavior over the intended temperature range.

🔧

Control and Peripheral Routing

DG412DVZ can route or isolate control and peripheral signals between logic subsystems where four independent paths are more useful than a shared multiplexer. TTL- and CMOS-compatible digital inputs support integration with embedded logic, while the normally open state offers a predictable inactive condition. Keep control traces away from sensitive analog nets and use a solid ground reference to limit switching transients. Confirm the supply range, input thresholds, and timing from the manufacturer datasheet for the selected logic family.

Önerilen Ürünler Özeti

DG412DVZ Renesas Electronics Kullanıldığı Yer: Sensor Signal Isolation, ADC Channel Routing, Automated Test Systems, Communication Signal Routing, Battery-Powered Instrumentation, Control and Peripheral Routing DG411DVZ Same-family SPST routing option Kullanıldığı Yer: Sensor Signal Isolation, ADC Channel Routing, Automated Test Systems, Communication Signal Routing, Battery-Powered Instrumentation, Control and Peripheral Routing
What is the DG412DVZ?
The DG412DVZ is a Renesas Electronics monolithic CMOS analog switch containing four independent SPST, normally open switch circuits in a 16-TSSOP package. According to the Renesas DG411, DG412 and DG413 datasheet, each switch provides a 1:1 signal path, and the digital control inputs are compatible with both TTL and CMOS logic. The device is intended for compact, surface-mount analog-signal routing and isolation.
What is the on resistance of DG412DVZ?
The DG412DVZ has a specified on resistance of 35 ohms. According to the Renesas product listing, the device is a four-circuit 1:1 analog switch in a 16-TSSOP package. This resistance contributes to signal attenuation and output drive requirements when the switch is closed. Use the manufacturer datasheet to confirm the applicable voltage, current, and test conditions before finalizing the signal-path budget.
Where can I download the DG412DVZ datasheet PDF?
The official DG412DVZ datasheet is available from Renesas through the DG411, DG412 and DG413 document page. The document covers the monolithic quad-SPST CMOS switch family and its common electrical characteristics. It is the appropriate source for supply limits, control thresholds, timing, dynamic resistance, off isolation, charge injection, and the complete 16-pin connection table. Open the linked datasheet and select the document containing DG412DVZ.
Where can I find the DG412DVZ pinout?
The DG412DVZ pinout is documented in the pin-configuration and pin-description tables of the Renesas DG411, DG412 and DG413 datasheet. The device uses a 16-TSSOP package with four SPST channels and normally open contacts. Use that table to map each switched terminal, control input, and supply connection to the physical PCB footprint rather than inferring pin functions from a generic analog-switch diagram.
Is DG412DVZ suitable for industrial applications?
Yes, the DG412DVZ is identified as an industrial-temperature-grade component in the product listing. Its four independent normally open SPST channels and 35-ohm on resistance make it suitable for industrial signal-routing and isolation functions when the signal amplitude, current, switching speed, and temperature remain within the manufacturer limits. Review the operating-temperature and absolute-maximum ratings in the Renesas datasheet before production release.
DG412DVZ vs DG412DVZ-T - which one should I select?
DG412DVZ and DG412DVZ-T identify the same DG412 electrical configuration in 16-TSSOP packaging, with the suffix distinguishing the packing format for automated assembly. The DG412DVZ-T listing is the tape-and-reel orderable form, while the base DG412DVZ listing is the primary catalog entry. Both retain four independent SPST switches, 35-ohm on resistance, and 1:1 routing, so the mechanical packing requirement should determine the final selection.
What is the best drop-in replacement for DG412DVZ?
The closest documented drop-in replacement is DG412DVZ-T, which retains the 16-TSSOP package, four SPST channels, normally open behavior, 35-ohm on resistance, and digital control arrangement. DG411DVZ can also match the footprint and switching topology, although its electrical characteristics must be checked against the DG412 requirements. No broader set of fully documented, package-identical alternatives is established, so do not substitute a muxing switch or a normally closed device without schematic verification.
Can DG411DVZ replace DG412DVZ?
DG411DVZ is a close same-package candidate because the DG411 family also uses four independent SPST CMOS analog switches and the manufacturer describes the DG411/DG412/DG413 devices as related switch families. However, DG411 and DG412 are distinct catalog families, so voltage limits, on resistance, timing, control levels, and pin functions must be checked before replacement. The DG412DVZ-T remains the most direct documented alternative.
When should I choose DG412DVZ over a multiplexer?
Choose DG412DVZ when the design requires four independent on/off paths rather than selecting one of several inputs with a shared output. Its four normally open SPST switches can isolate, connect, or disconnect signals independently, making it appropriate for sensor selection, test routing, and load isolation. A multiplexer is preferable when many signals must be scanned through one common endpoint and simultaneous independent connections are unnecessary.
Is DG412DVZ suitable for sensor and ADC signal routing?
Yes, the DG412DVZ can route signals from up to four independent sources when the source impedance, signal amplitude, and required settling time fit the device characteristics. The 35-ohm on resistance must be included in the source-load and settling analysis. Pay particular attention to charge injection, off isolation, and leakage when the ADC input has high source impedance, using the manufacturer datasheet for the relevant limits.
Where can I buy DG412DVZ and what is the lead time?
Use the Request a Quote form on this page to request DG412DVZ availability, lead time, and order quantities. The DG412DVZ and DG412DVZ-T catalog entries identify a 16-TSSOP Renesas device, while current stock and delivery timing can change by region and order volume. For production planning, submit the required quantity, packing format, and delivery location with the quote request rather than relying on a static stock indication.
What is the price of DG412DVZ?
Use the Request a Quote form on this page for the current DG412DVZ unit price, volume tiers, and currency. The commercial quote reflects order quantity, package form, delivery location, and current component availability. The base DG412DVZ and tape-and-reel DG412DVZ-T are separate catalog entries, so include the exact suffix and desired quantity when requesting pricing for the part to be assembled.
Is DG412DVZ in stock?
Current DG412DVZ inventory should be confirmed through the Request a Quote form on this page. Stock can vary between the base 16-TSSOP catalog entry and the DG412DVZ-T tape-and-reel order code. Provide the required quantity, packing preference, and destination when requesting a quotation so that the response reflects the actual orderable configuration rather than a generic listing status.
What are the key specifications of DG412DVZ that engineers should know?
The principal DG412DVZ specifications are four independent SPST channels, normally open contacts, 1:1 signal routing, 35-ohm on resistance, CMOS technology, TTL- and CMOS-compatible control, and a 16-TSSOP surface-mount package. These features place it in the analog-switch and signal-routing IC category. Supply voltage, timing, isolation, charge injection, and absolute maximum ratings should be selected from the manufacturer datasheet for the intended design.
What can replace DG412DVZ in a 16-TSSOP circuit?
DG412DVZ-T is the most direct documented replacement because it preserves the DG412 device configuration and 16-TSSOP footprint. DG411DVZ is another same-brand family candidate for evaluation because it also provides four independent SPST switches, but it is a different DG411 series device and requires a complete pin and electrical review. Avoid replacing the part with a normally closed DG413-type switch or a multiplexer without redesigning the control and routing logic.

Mühendislik referans verileri: DG412DVZ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose DG412DVZ for a compact 16-TSSOP design that requires four independent, normally open SPST analog paths with a listed 35-ohm on resistance and TTL- or CMOS-compatible control. DG412DVZ-T is the preferred choice when the assembly process requires the tape-and-reel catalog form; the electrical configuration and footprint remain the same. DG411DVZ and DG411DVZ-T can be evaluated when supply availability or design standardization favors the DG411 family, but they are distinct series and require review of pin functions, contact state, voltage limits, timing, and resistance. Avoid selecting a normally closed switch, a multiplexer, or a device with fewer independent channels as a direct substitute. For production, use the Request a Quote form for the exact suffix and quantity, and use the Renesas DG411/DG412/DG413 datasheet to validate absolute maximum ratings, switching performance, and the final PCB layout.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün DG412DVZ-T DG411DVZ DG411DVZ-T
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Number of Switch Circuits 4 circuits 4 circuits 4 circuits 4 circuits
Switch Configuration 1:1 SPST 1:1 SPST SPST SPST
Technology CMOS CMOS CMOS CMOS
Number of Terminals 16 terminals 16 terminals 16 terminals 16 terminals
Control Compatibility TTL-compatible and CMOS-compatible digital inputs TTL-compatible and CMOS-compatible digital inputs TTL-compatible and CMOS-compatible digital inputs TTL-compatible and CMOS-compatible digital inputs

Ana Farklılayıcılar

  • Documented direct catalog alternative (karşılaştırma:DG412DVZ-T)
  • Independent four-channel routing (karşılaştırma:DG411DVZ)
  • Normally open default isolation (karşılaştırma:DG411DVZ-T)

Tasarım Notları

Include the 35-ohm on resistance in the complete signal-path calculation for attenuation, logic-level margin, and output-current demand. For high-impedance receivers, also evaluate the switch leakage and off isolation specified in the manufacturer datasheet. Keep the switched node and its return path short, because long PCB traces add capacitance and can increase settling time after a control transition.

Place DG412DVZ near the signal source and receiver to minimize trace capacitance and coupling. Use the pin-description table in the Renesas datasheet to assign all 16 connections and connect the supply and ground pins to a low-impedance plane. Keep digital control routing away from sensitive analog nets, and provide a bypass capacitor close to the device when the application circuit requires local supply decoupling.

Do not treat a SPST switch as a multiplexer, and do not assume that a similarly named DG411 or DG413 device has identical behavior. Verify normally open versus normally closed contacts, control polarity, input thresholds, supply range, and timing before substituting. A footprint match alone does not establish functional drop-in compatibility, particularly when the design relies on a defined disconnected state.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The DG412 catalog information identifies an industrial-grade device but does not establish the requested environmental or material compliance statuses. Confirm package-specific declarations with Renesas before production release.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

DG412DVZ DG412DVZ datasheet DG412DVZ datasheet pdf DG412DVZ pinout DG412DVZ equivalent DG412DVZ replacement DG412DVZ cross reference DG412DVZ vs DG412DVZ-T DG412DVZ TSSOP-16 DG412DVZ 35 ohm SPST Renesas DG412DVZ DG412DVZ price

İlgili Bileşenler ve Terimler

Renesas Electronics DG412DVZ DG412DVZ-T DG411DVZ DG411DVZ-T DG412 DG411 DG413 DG211 DG212 analog switch CMOS analog switch SPST switch normally open switch multiplexer signal-routing integrated circuit interface IC semiconductor 16-TSSOP TSSOP package family surface mount SMD on resistance charge injection off isolation TTL-compatible digital input CMOS-compatible digital input industrial instrumentation automated test equipment sensor signal isolation
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle