Texas Instruments

INA110KPG4 - Fast-Settling FET Instrumentation Amplifier | Texas Instruments

MPN: INA110KPG4 ✗ Son Kullanım Zamanı
±6 V to ±18 V Vdss 16-pin PDIP Package
MOQ: 1 |

INA110KPG4 Genel Bakış

Texas Instruments INA110KPG4 is a fast-settling, FET-input instrumentation amplifier packaged in a 16-pin PDIP. It accepts supply voltages from ±6 V to ±18 V, provides single-ended output, supports gains of 1, 10, 100, or 1000, and features a 2.5 MHz bandwidth with 500 µV input offset voltage. The device is intended for precision signal-conditioning systems that require high input impedance, low bias current, and accurate differential measurement.

An instrumentation amplifier is a specialized amplifier optimized for measuring the difference between two low-level input signals. Its internal architecture provides high input impedance, low output impedance, excellent common-mode rejection, and stable gain set by a resistor or selectable internal gain network. This makes the INA110KPG4 useful when sensor outputs are small, source impedance is high, or the measurement must reject common-mode interference appearing equally on both inputs.

The INA110KPG4 combines a 2.5 MHz bandwidth with fast settling, making it suitable for measurement channels that need to respond quickly after a control, excitation, or sensor input changes. Its FET-input stage supports low input bias current, while the 500 µV input offset specification defines the dc error budget for high-gain measurements. The 16-pin PDIP format is appropriate for through-hole prototype boards, laboratory instrumentation, educational systems, and established production assemblies that accept a dual-inline footprint.

The amplifier can operate with positive and negative supply rails, allowing the output to remain centered around ground while processing bipolar sensor signals. A reference connection permits output-voltage shifting when the system requires a nonzero midpoint. The available gains of 1, 10, 100, and 1000 allow the same device architecture to cover both high-level measurements and small differential signals without changing packages.

Typical uses include bridge-transducer amplification, low-current measurement, biomedical instrumentation, industrial sensor interfaces, laboratory measurement systems, and data-acquisition modules. The device is especially useful when the source impedance is too high for a conventional voltage-amplifier input or when the measured differential signal is much smaller than the surrounding common-mode voltage.

When laying out a board, keep the input and output paths short, provide a stable low-noise reference network, and observe the supply-voltage limits of ±6 V to ±18 V. Breadboard connections and long unprotected input tracks should be avoided because leakage, contamination, and parasitic capacitance can degrade accuracy and settling performance.

This product page combines package details, operating limits, application guidance, and verified drop-in alternatives. It also provides practical design notes for a legacy bipolar-supply instrumentation amplifier used in sensitive analog measurement systems.

Drop-in alternatifler için INA110KPG4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller INA110KPG4 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Supply Voltage Range.

Texas Instruments
Package: 16-pin plastic DIP (PDIP)
Supply Voltage Range: 12 V to 36 V
İle Karşılaştır INA110KPG4 →

INA110KP

✅ Yerleştirme
Texas Instruments
📦 16-pin PDIP
Instrumentation amplifier · 1 circuit · FET input · Current feedback · 1, 10, 100, 200, and 500 V/V · 2.5 MHz · 17 V/µs · 4 µs to 0.01%

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

INA110KPG4 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Fast-settling FET-input instrumentation amplifier
Internal Amplifier Count 3 amplifiers
Supply Voltage Range ±6 V to ±18 V
Input Offset Voltage 500 µV
Bandwidth 2.5 MHz
Çıkış Türü Single-ended
Input Stage FET-input
Available Gains 1, 10, 100, and 1000
Paket 16-pin PDIP
Package Pin Count 16 pins
Package Row Spacing 7.62 mm
Package Pitch 0.300 in
Montaj Stili Through-hole
Yaşam Döngüsü Durumu Inactive

INA110KPG4 0.300 in Pin Yapısı Kılavuzu

INA110KPG4 (0.300 in paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

0.300 in paket pin çizelgesi için INA110KPG4

Ayrıntılı pin çıkış verisi mevcut değil: INA110KPG4.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

INA110KPG4 için uygundur 6 uygulamas: Bridge Transducer Signal Conditioning, Low-Current Sensor Measurement, Biomedical Signal Acquisition, Industrial Pressure and Strain Monitoring, Laboratory Instrumentation, Data Acquisition Front End.

🏭

Bridge Transducer Signal Conditioning

The INA110KPG4 fits bridge-transducer front ends that produce a small differential voltage in the presence of a larger common-mode voltage. Its FET-input instrumentation-amplifier architecture avoids loading the sensor source, while selectable gains of 1, 10, 100, and 1000 allow the bridge output to be scaled before digitization. The 2.5 MHz bandwidth supports rapid response, and the single-ended output is convenient for a following data converter or measurement instrument. The 16-pin PDIP package also makes the amplifier practical for laboratory bridge boards and established through-hole assemblies.

🧩

Low-Current Sensor Measurement

The INA110KPG4 is appropriate for low-current sensors whose output impedance is too high for a conventional input stage. Its FET-input design supports low-bias-current measurement, while the instrumentation-amplifier configuration converts a weak differential sensor voltage into a single-ended signal referenced to ground or another selected reference. Gains of 10, 100, or 1000 can increase small-sensor output to a more useful measurement level. The 500 µV input offset specification must be considered alongside the selected gain when establishing the total measurement error.

💊

Biomedical Signal Acquisition

The INA110KPG4 can condition differential biomedical or physiological sensor signals in a laboratory acquisition system. High input impedance reduces the burden placed on the sensor, and the selectable internal gains accommodate signal ranges from volts to millivolts. Its 2.5 MHz bandwidth is suitable for many general-purpose physiological measurement channels, while the single-ended output simplifies connection to an ADC input. Because medical applications can involve patient protection, the completed circuit must also satisfy the applicable safety, isolation, leakage, and electrode requirements of the finished system.

🏭

Industrial Pressure and Strain Monitoring

The INA110KPG4 suits pressure, load-cell, and strain-gauge monitoring circuits that operate in electrically noisy industrial environments. Its high-input-impedance differential stage reduces source loading, and the available gains of 1, 10, 100, and 1000 let designers select the signal scaling appropriate for the sensor range. The fast-settling, 2.5 MHz architecture provides useful response for changing mechanical loads, while the 500 µV offset specification helps define precision at higher gain. Board layout should keep input traces short and minimize leakage around the sensitive pins.

🔧

Laboratory Instrumentation

The INA110KPG4 is well suited to bench instrumentation that measures small differential voltages with a grounded single-ended output. Its 16-pin PDIP package is convenient for prototype and educational platforms, and its three internal amplifiers provide selectable gain without requiring a complete external instrumentation-amplifier network. The 2.5 MHz bandwidth permits reasonably fast measurements, while ±6 V to ±18 V supplies permit bipolar operation around ground. The reference connection gives the instrument designer an additional way to offset the output when matching an analog-to-converter input range.

🖥️

Data Acquisition Front End

The INA110KPG4 can form the analog front end of a multichannel data-acquisition system for differential sensor signals. Selectable gains of 1, 10, 100, and 1000 normalize different input ranges before conversion, while the single-ended output can feed an ADC or sample-and-hold stage. Its 2.5 MHz bandwidth is adequate for many general-purpose acquisition channels and helps the amplifier settle following each conversion cycle. Designers should account for the 500 µV input offset, especially at gain 1000, and use clean grounding and supply arrangements to preserve measurement quality.

What is the INA110KPG4?
The INA110KPG4 is a fast-settling, FET-input instrumentation amplifier from Texas Instruments. It uses three internal amplifiers, accepts bipolar supply voltages from ±6 V to ±18 V, provides a single-ended output, and offers selectable gains of 1, 10, 100, and 1000. The device is packaged in a 16-pin PDIP and is intended for precision differential-signal measurement.
What are the key specifications of INA110KPG4 that engineers should know?
The principal INA110KPG4 specifications are a 2.5 MHz bandwidth, 500 µV input offset voltage, ±6 V to ±18 V supply operation, and a 16-pin PDIP package. According to the Texas Instruments datasheet, the device is a three-amplifier, single-ended-output instrumentation amplifier with selectable gains of 1, 10, 100, and 1000.
Where can I download the INA110KPG4 datasheet PDF?
The INA110KPG4 datasheet PDF is available from the Texas Instruments product documentation linked on this page and from the datasheet listing linked here. It contains the electrical characteristics, gain-selection connections, reference configuration, pin assignments, and application information needed to design the amplifier around the 2.5 MHz bandwidth and ±18 V maximum supply magnitude.
Where can I find the INA110KPG4 pinout?
The INA110KPG4 pinout is defined in the pin-configuration section of the Texas Instruments INA110 datasheet. The device uses a 16-pin PDIP package with a 0.300 in pitch and 7.62 mm row spacing. Use the manufacturer pin-description table to assign input, output, reference, supply, and gain-network connections before laying out a replacement board.
What supply voltage does the INA110KPG4 require?
The INA110KPG4 operates from ±6 V to ±18 V, meaning that both the positive and negative rails must be present for normal bipolar operation. The Texas Instruments datasheet identifies an 18 V maximum magnitude for each supply rail. Its symmetric supply arrangement lets the single-ended output represent bipolar sensor signals around ground.
How fast is the INA110KPG4?
The INA110KPG4 has a specified bandwidth of 2.5 MHz and is designed for fast settling after input changes. This combination is useful in laboratory and industrial systems that must acquire a changed sensor value quickly, although actual settling accuracy also depends on gain, source impedance, reference configuration, and the surrounding circuit.
Can the INA110KPG4 measure bipolar differential signals?
Yes, the INA110KPG4 is designed to measure bipolar differential signals while using positive and negative supply rails. It accepts inputs from ±6 V to ±18 V and produces a single-ended output referenced to the circuit ground or to a selected reference voltage. The reference connection can shift the output range when a nonzero zero point is required.
When should I choose the INA110KPG4 over a conventional operational amplifier?
Choose the INA110KPG4 when the source has high impedance, the useful signal is small relative to a common-mode voltage, or stable differential gain is more important than a minimal circuit footprint. Its three-amplifier instrumentation architecture provides high input impedance and selectable gains of 1, 10, 100, and 1000, while a conventional op amp generally requires additional input and feedback networks.
What can replace the INA110KPG4?
The INA110KP is the closest identified drop-in option because it uses the same Texas Instruments INA110 architecture and a 16-pin PDIP package. The INA110KPG4 has a specific green-material ordering suffix, so engineers should confirm the required grade, markings, and procurement status before treating INA110KP as an exact substitution.
Is INA110KPG4 the same as INA110KP?
The INA110KPG4 and INA110KP belong to the same Texas Instruments INA110 device family and use a 16-pin PDIP package. Their functional architecture and principal electrical ratings are therefore closely aligned, but the orderable suffixes can identify different material or processing options. Confirm the marking requirements and current product status before substitution.
What is the best Analog Devices equivalent for INA110KPG4?
The cross-reference information identifies an Analog Devices compatible equivalent, but it does not provide the exact orderable MPN. A valid drop-in selection must be checked against the 16-pin PDIP footprint, gain-network connections, ±6 V to ±18 V supplies, 500 µV offset class, and 2.5 MHz bandwidth requirement. Use the Request a Quote form to request a specifically qualified substitute.
INA110KPG4 vs INA110KP — which is better for an existing board?
The INA110KPG4 and INA110KP are closely related choices for a board using the 16-pin PDIP INA110 footprint. The INA110KPG4 carries a green-material suffix, while INA110KP is listed separately. For an existing design, both package outline and pin-level gain-network wiring must match; ordering-specific requirements can determine which one is preferable.
Where can I buy INA110KPG4 online?
Use the Request a Quote form on this page to request INA110KPG4 availability, current pricing, and a suitable order quantity. The device is marked inactive, so procurement should explicitly confirm remaining supply, lot traceability, and the required package suffix rather than assuming that every historical catalog reference reflects current availability.
What is the lead time for INA110KPG4?
Lead time for the INA110KPG4 must be confirmed for the requested quantity and package through the Request a Quote form on this page. The Texas Instruments listing identifies the device as inactive, so lead time depends on remaining factory or channel inventory and traceability requirements. A quotation should also state the manufacturer packing format and authorized source.
Is INA110KPG4 in stock?
Current INA110KPG4 stock should be confirmed through the Request a Quote form on this page. The product listing identifies the part as inactive, so historical availability does not establish present inventory. When requesting a quote, specify the required quantity, acceptable date code, traceable manufacturer origin, and whether substitutions such as INA110KP are permitted.

Mühendislik referans verileri: INA110KPG4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the INA110KPG4 when an established design requires a 16-pin PDIP fast-settling FET-input instrumentation amplifier with gains of 1, 10, 100, and 1000. Its 2.5 MHz bandwidth, 500 µV offset specification, and single-ended output suit bridge sensors, low-level current measurements, laboratory instruments, and industrial data-acquisition front ends. INA110KP is the closest identified board-compatible option in the same package, but the ordering suffix and marking requirements should be confirmed before substitution. A functional cross-reference is not automatically a drop-in replacement; any candidate must match the package outline, gain-network wiring, supply limits, offset performance, and bandwidth. Because the INA110KPG4 is listed as inactive, obtain lot traceability and lifecycle confirmation through the Request a Quote form before committing a new production design.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün INA110KP
Brand Texas Instruments Texas Instruments
Package 16-pin PDIP 16-pin PDIP
Product Type Fast-settling FET-input instrumentation amplifier FET-input instrumentation amplifier
Package Pitch 0.300 in (7.62 mm) 16-pin PDIP

Ana Farklılayıcılar

  • Fast 2.5 MHz instrumentation-amplifier bandwidth (karşılaştırma:INA110KP)
  • Selectable gain range in a 16-pin PDIP footprint (karşılaştırma:INA110KP)
  • Single-ended output with bipolar supplies (karşılaştırma:INA110KP)

Tasarım Notları

Keep the INA110KPG4 input traces short, symmetric, and away from switching nodes and high-current return paths. High input impedance does not eliminate sensitivity to leakage from board contamination, flux residue, or long unprotected traces. Maintain a consistent ground reference between the two inputs and place any gain-setting or reference components close to the associated device pins.

Evaluate settling with the intended gain, source impedance, reference connection, and downstream load rather than relying only on the 2.5 MHz bandwidth figure. Long wiring, breadboard contacts, and connector capacitance can materially change effective response. Use short analog traces, a stable reference network, and an acquisition sequence that allows the output to settle before sampling.

Do not apply a single-ended signal directly between the differential inputs without accounting for the common-mode voltage and source impedance. Both input nodes and the reference network must remain inside the device's permitted operating conditions. Also verify the gain connection on the manufacturer pin diagram because the internal gain network uses package pins rather than a separate external feedback resistor.

Provide clean positive and negative supply rails within the specified ±6 V to ±18 V range. Decouple each supply rail close to the device, and connect the bypass return directly to the device ground reference. Poor supply grounding can degrade output behavior and inject noise into a low-level differential measurement even when the amplifier itself is correctly connected.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The component is an instrumentation amplifier rather than an automotive-qualified device. Specific environmental, material, and conflict-minerals declarations were not identified in the product information and remain unknown.

İlgili Aramalar

INA110KPG4 datasheet INA110KPG4 pinout INA110KPG4 datasheet pdf INA110KPG4 specifications INA110KPG4 equivalent INA110KPG4 replacement INA110KPG4 cross reference INA110KPG4 vs INA110KP INA110KPG4 16 pin PDIP INA110KPG4 instrumentation amplifier Texas Instruments INA110KPG4 INA110KPG4 price INA110KPG4 stock

İlgili Bileşenler ve Terimler

Texas Instruments INA110KPG4 INA110KP fast-settling instrumentation amplifier FET-input amplifier three-amplifier architecture single-ended output differential signal common-mode voltage input offset voltage bandwidth input impedance gain selection 16-pin PDIP dual-inline package surface-mount alternative through-hole mounting bridge transducer load cell strain gauge pressure sensor biomedical instrumentation industrial data acquisition low-current measurement analog front end
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle