Texas Instruments

INA326EA/250 - 1kHz Precision Instrumentation Amplifier | TI

MPN: INA326EA/250 ✓ Aktif
2.7 V to 5.5 V Vdss 8-pin VSSOP (DGK) Package
MOQ: 1 |

INA326EA/250 Genel Bakış

The Texas Instruments INA326EA/250 is a precision, low-drift CMOS instrumentation amplifier with rail-to-rail input and output operation, 100 µV maximum input offset voltage, 114 dB typical gain bandwidth at 1 kHz, and 33 nV/√Hz typical input noise. The device is supplied in an 8-pin VSSOP (DGK) package and operates from 2.7 V to 5.5 V.

An instrumentation amplifier is a specialized analog amplifier optimized for measuring small differential signals while rejecting common-mode interference. Its internal architecture provides gain, differential sensing, and input common-mode rejection in one device. Within the broader hierarchy, an instrumentation amplifier is an amplifier IC and a precision signal-conditioning component used ahead of converters, sensors, and data-acquisition systems. The INA326 family is designed for systems requiring low drift, low noise, and rail-to-rail signal-chain flexibility.

Key characteristics include one amplifier channel, a 0.1 V/V to 1000 V/V programmable gain range, rail-to-rail inputs and outputs, a 2.7 V to 5.5 V supply range, and operation from -40 °C to 85 °C. The combination of 100 µV maximum input offset and 33 nV/√Hz typical noise supports accurate extraction of low-level differential signals. The 1 kHz gain-bandwidth characteristic makes the device suitable for precision rather than high-speed signal acquisition.

The INA326EA/250 uses a CMOS implementation to combine low input bias current, low offset voltage, and low drift with rail-to-rail input and output behavior. Because its output can approach the supply rails, downstream circuitry can use a wide portion of the available analog voltage range. Its programmable gain allows one device family to serve applications ranging from modest differential amplification to high-gain sensor conditioning while preserving the same 8-pin footprint.

Typical uses include bridge and strain-gauge signal conditioning, low-level current measurement, precision sensor interfaces, medical instrumentation, industrial process measurement, and data-acquisition front ends. The device is particularly appropriate when the target signal is differential, the common-mode environment is demanding, and measurement accuracy matters more than wideband throughput. A suitable analog-to-digital converter can then digitize the conditioned output.

A key design consideration is to preserve the differential nature of the input signal. Keep input routing compact, use symmetric interconnections where practical, and place the gain-setting resistor close to the RG pin. Follow the Texas Instruments datasheet pin-description table when assigning PCB tracks, and confirm that the selected gain, supply voltage, and output-swing requirements remain compatible with the intended sensor.

This page consolidates the Texas Instruments product characteristics, ordering information, package details, technical comparisons, and application guidance for engineers evaluating the INA326EA/250. It also organizes drop-in ordering options, practical design considerations, and search-focused technical information into one engineering reference.

Drop-in alternatifler için INA326EA/250 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

INA326EA/250G4

✅ Yerleştirme
📦 8-pin VSSOP (DGK)
Same 2.7 V to 5.5 V supply, 0.1 V/V to 1000 V/V gain range, rail-to-rail I/O, 100 µV maximum offset, and 1 kHz gain bandwidth; ordering suffix differs by 0% in key ratings.

📋 Katalogda Olmayan Referans Alternatifi

INA326EA/250 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Precision CMOS instrumentation amplifier, 1 amplifier channel
Supply Voltage Range 2.7 V to 5.5 V
Gain Bandwidth 1 kHz
Typical Gain Bandwidth 114 dB at 1 kHz
Maximum Input Offset Voltage 100 µV
Input Noise Density 33 nV/√Hz typical at 1 kHz
Programmable Gain Range 0.1 V/V to 1000 V/V
Input Common-Mode Capability Rail-to-rail
Output Swing Capability Rail-to-rail
Number of Channels 1 channel
Technology CMOS
İşletim Sıcaklığı Aralığı -40 °C to +85 °C
Paket 8-pin VSSOP (DGK)
Montaj Türü Surface mount
RoHS Durumu Compliant

INA326EA/250 8-pin vssop (dgk) Pin Yapısı Kılavuzu

INA326EA/250 (8-pin vssop (dgk) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-pin vssop (dgk) paket pin çizelgesi için INA326EA/250

Ayrıntılı pin çıkış verisi mevcut değil: INA326EA/250.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

INA326EA/250 için uygundur 6 uygulamas: Strain-Gauge and Bridge Sensor Conditioning, Precision Current Measurement, Medical and Diagnostic Instrumentation, Industrial Process Measurement, Data-Acquisition Front Ends, Portable Sensor and IoT Interfaces.

🏭

Strain-Gauge and Bridge Sensor Conditioning

The INA326EA/250 fits low-level bridge measurements where differential excitation produces a small output around a substantial common-mode voltage. Its rail-to-rail input operation, 100 µV maximum input offset voltage, and programmable gain from 0.1 V/V to 1000 V/V help preserve accuracy while amplifying the bridge imbalance. The device is normally placed between the bridge and an ADC, with the gain-setting resistor connected according to the manufacturer configuration. Keep bridge excitation and sense paths short and symmetrical to reduce pickup and imbalance error.

⚡

Precision Current Measurement

The INA326EA/250 can amplify the voltage generated by a current shunt or current-transformer secondary when the signal is differential and low amplitude. Its 33 nV/√Hz typical input noise and low offset support measurements where the useful signal is close to the amplifier noise and offset limits. Because it is a precision, 1 kHz-bandwidth device rather than a wideband amplifier, the application benefits most when the measured current changes slowly enough for accurate settling and filtering.

💊

Medical and Diagnostic Instrumentation

The INA326EA/250 is appropriate for biomedical front ends that measure small differential sensor signals while rejecting interference from the surrounding environment. Rail-to-rail input and output capability provides useful signal range from a 2.7 V to 5.5 V supply, while the 100 µV maximum offset supports a low baseline error. For patient-connected or diagnostic equipment, engineers must also evaluate isolation, protection, leakage, safety, and applicable medical requirements separately from the amplifier's performance ratings.

🏭

Industrial Process Measurement

The INA326EA/250 supports low-level industrial sensor interfaces where a transducer produces a differential voltage and the controller requires accurate amplification before conversion. Its precision CMOS architecture, low-drift positioning, rail-to-rail I/O, and programmable gain suit pressure, temperature, and process-control signals. The 1 kHz gain-bandwidth characteristic limits high-speed transient capture, so the interface should include suitable filtering and ensure that amplifier settling meets the control-loop timing requirements.

🖥️

Data-Acquisition Front Ends

The INA326EA/250 can serve as the analog gain stage immediately before an ADC in a precision data-acquisition channel. A gain of 0.1 V/V to 1000 V/V allows the same amplifier family to handle signals of different amplitudes, while the 114 dB typical gain bandwidth at 1 kHz supports accurate low-frequency measurements. Use close input routing, a compact gain resistor, and appropriate anti-alias filtering. The ADC selection should match the amplifier's output swing, bandwidth, noise, and conversion requirements.

🧩

Portable Sensor and IoT Interfaces

The INA326EA/250 is suitable for battery-powered sensor nodes when the sensor output is small and differential and the system operates from a low-voltage rail. Its supply range begins at 2.7 V, and rail-to-rail input and output behavior can improve utilization of the available voltage in compact designs. The precision nature of the amplifier makes it useful for environmental, wearable, and condition-monitoring nodes. Designers should account for supply noise, sensor excitation, ADC conversion time, and the amplifier's own current consumption when calculating battery life.

What is the operating voltage of INA326EA/250?
The INA326EA/250 operates from 2.7 V to 5.5 V according to the Texas Instruments product page. Its rail-to-rail inputs and outputs allow the signal interface to use nearly the available supply range. Designers should confirm output headroom at the selected gain and ensure the sensor common-mode voltage and amplified output remain inside the device limits.
What are the key specifications of INA326EA/250 that engineers should know?
The INA326EA/250 is a one-channel, precision CMOS instrumentation amplifier with rail-to-rail input and output operation. According to Texas Instruments, it operates from 2.7 V to 5.5 V, provides a programmable gain range of 0.1 V/V to 1000 V/V, and has 100 µV maximum input offset voltage. Its typical gain bandwidth is 114 dB at 1 kHz, with 33 nV/√Hz typical input noise at 1 kHz.
Where to download the INA326EA/250 datasheet PDF?
The official INA326 data is available from the Texas Instruments INA326 product page at https://www.ti.com/product/INA326. That page provides the manufacturer datasheet, ordering information, parameters, and quality documentation for the INA326 family. Use the manufacturer's document for the final pin descriptions, recommended external components, gain-setting limits, and electrical test conditions.
Where can I find the INA326EA/250 pinout?
The INA326EA/250 pinout is published in the pin-configuration section of the Texas Instruments INA326 datasheet. The device uses an 8-pin VSSOP (DGK) package. Use the manufacturer's pin-description table when assigning PCB tracks, especially for the differential inputs, reference connections, gain-setting terminal, supply pins, and output.
How noisy is the INA326EA/250?
The INA326EA/250 has a typical input noise density of 33 nV/√Hz at 1 kHz, according to Texas Instruments. Combined with a maximum input offset voltage of 100 µV, this makes the amplifier suitable for low-level differential measurements. Actual system noise also depends on the selected gain, resistor noise, sensor source impedance, bandwidth, and the noise contributed by the following converter.
What is the best drop-in replacement for INA326EA/250?
The INA326EA/250G4 is the closest orderable drop-in option identified for the INA326EA/250 because it retains the same INA326 electrical configuration and 8-pin VSSOP (DGK) footprint. The difference is the ordering suffix rather than a change in gain, supply range, or pin assignment. Confirm the marking, reel format, and quality requirements before approving the substitution.
Can INA326EA/250G4 replace INA326EA/250?
Yes, the INA326EA/250G4 is pin-compatible with the INA326EA/250 and retains the same 8-pin VSSOP package and principal electrical ratings. The distinction is the manufacturer ordering suffix. A PCB designed for INA326EA/250 therefore does not require a footprint change, although procurement teams should verify the exact orderable code and packaging documentation.
INA326EA/250 vs INA326EA/250G4 — which is better?
The INA326EA/250 and INA326EA/250G4 use the same 8-pin VSSOP (DGK) package and represent the same core INA326 device configuration. According to the Texas Instruments ordering listing, INA326EA/250G4 is identified as an 8-pin VSSOP device rated from -40 °C to 85 °C. Choose whichever exact ordering code matches the required production format; no electrical or layout migration is indicated.
When should I choose INA326EA/250 over a general-purpose op amp?
Choose the INA326EA/250 when the source is differential and common-mode rejection, offset control, and gain-setting convenience are more important than wideband performance. It integrates the functions normally assembled from several precision amplifiers and resistors. A general-purpose op-amp circuit can be appropriate for higher bandwidth, but it usually requires additional matching and common-mode rejection analysis.
Is INA326EA/250 suitable for strain-gauge and bridge sensor measurement?
Yes, the INA326EA/250 is suitable for precision bridge and strain-gauge front ends because it combines rail-to-rail input operation, 100 µV maximum offset voltage, low drift, and programmable gain. The input arrangement and gain resistor must follow the manufacturer reference configuration. Care is still required to keep excitation and signal traces compact and to account for sensor imbalance when calculating practical error.
Where to buy INA326EA/250 online?
Use the Request a Quote form on this page to request the INA326EA/250 and obtain current commercial availability, lot-related information, and lead time. The official Texas Instruments part-details page at https://www.ti.com/product/INA326/part-details/INA326EA/250G4 identifies the orderable device and its 8-pin VSSOP configuration. Current sourcing terms should always be confirmed through the quotation workflow.
What is the price of INA326EA/250?
Current pricing for the INA326EA/250 is available through the Request a Quote form on this page. The form is the appropriate channel for quantity pricing, production-lot requirements, and any applicable logistics costs. Use the exact INA326EA/250 order code and state the required quantity and packaging format so the quotation reflects the correct device.
What is the lead time for INA326EA/250?
Current lead time for the INA326EA/250 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing availability, and the selected orderable suffix. The Texas Instruments product page provides the authoritative family and ordering details, while the quotation workflow provides the present commercial schedule.
Is INA326EA/250 in stock?
Use the Request a Quote form on this page to check current availability for the INA326EA/250. Inventory status changes with demand and lot allocation, so it should be confirmed for the exact orderable code and required quantity. Texas Instruments lists the INA326 as an active precision, low-drift CMOS instrumentation amplifier family.
What is the best cross-brand equivalent for INA326EA/250?
No cross-brand drop-in equivalent is established for the INA326EA/250 from the available substitution records. The requirement is stricter than merely sharing an 8-pin package: the replacement must also match the INA326 pin assignment, 2.7 V to 5.5 V supply range, gain architecture, offset, noise, and rail-to-rail behavior. For a cross-brand design, compare those electrical limits and recalculate the surrounding circuit rather than assuming footprint compatibility.

Mühendislik referans verileri: INA326EA/250 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the INA326EA/250 for precision differential signal conditioning when the design requires rail-to-rail input and output operation, a 2.7 V to 5.5 V supply, programmable gain from 0.1 V/V to 1000 V/V, and low offset and noise. The INA326EA/250G4 is the closest identified drop-in ordering option because it retains the same electrical ratings and 8-pin VSSOP footprint; select it when its exact suffix and production documentation meet procurement requirements. If the application needs high-speed signal capture, neither identified option should be assumed to provide wideband performance: both are positioned around a 1 kHz gain-bandwidth characteristic. For a cross-brand replacement, require a verified pin mapping and comparison of supply range, gain method, offset, noise, common-mode range, output swing, and bandwidth before approving it. For low-level bridge, current-sense, medical, industrial, and data-acquisition channels, the INA326EA/250 is most suitable when accuracy and common-mode rejection are more important than high-frequency throughput.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün INA326EA/250G4
Package 8-pin VSSOP (DGK) 8-pin VSSOP (DGK)
Brand Texas Instruments Texas Instruments
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V
Number of Channels 1 channel 1 channel
Programmable Gain Range 0.1 V/V to 1000 V/V 0.1 V/V to 1000 V/V
Maximum Input Offset Voltage 100 µV 100 µV
Input Noise Density 33 nV/√Hz typical at 1 kHz 33 nV/√Hz typical at 1 kHz
Gain Bandwidth 1 kHz, with 114 dB typical gain bandwidth 1 kHz, with 114 dB typical gain bandwidth
Input and Output Capability Rail-to-rail input and output Rail-to-rail input and output
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C
Technology Precision, low-drift CMOS Precision, low-drift CMOS

Ana Farklılayıcılar

  • Exact same electrical and package configuration (karşılaştırma:INA326EA/250G4)
  • Rail-to-rail differential signal interface (karşılaştırma:INA326EA/250G4)
  • Precision noise and offset performance (karşılaştırma:INA326EA/250G4)

Tasarım Notları

Route the two inputs as a compact differential pair and connect the gain-setting resistor directly to the RG pin with a short, low-inductance trace. Keep the input network close to the amplifier to minimize parasitic capacitance and susceptibility to coupled noise. For a bridge sensor, maintain symmetrical geometry between the excitation and sensing paths so that a small physical disturbance does not become a differential measurement error.

Do not select the gain solely to make the signal appear large. First verify the sensor's output range, common-mode voltage, required bandwidth, and allowable error, then check that the amplified output can settle within the system's input range. The device is optimized for precision, 1 kHz-bandwidth measurements; excessive gain can consume output swing or reduce usable bandwidth before conversion.

Place the device's supply decoupling capacitor next to the supply and ground pins, and use a short ground return to minimize supply ripple and ground bounce. Apply filtering after amplification when the bandwidth requirement permits it. Account for the amplifier's 33 nV/√Hz input noise, the gain-setting resistor's own thermal noise, and the ADC's input-referred noise when establishing an end-to-end noise target.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

RoHS compliance is identified in the Mouser product listing. No additional REACH, halogen-free, conflict-minerals, or automotive qualification statement is confirmed.

Veri doğrulanma tarihi: 2026-11-19 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

INA326EA/250 datasheet INA326EA/250 pinout INA326EA/250 datasheet pdf INA326EA/250 specifications INA326EA/250 8 pin VSSOP INA326EA/250 rail to rail INA326EA/250 replacement INA326EA/250 equivalent INA326EA/250 vs INA326EA/250G4 INA326EA/250 price INA326EA/250 stock Texas Instruments INA326EA/250

İlgili Bileşenler ve Terimler

Texas Instruments INA326EA/250 INA326EA/250G4 INA326 precision instrumentation amplifier instrumentation amplifier amplifier IC CMOS rail-to-rail input rail-to-rail output programmable gain input offset voltage input noise density gain bandwidth low-dropout signal conditioning precision measurement 8-pin VSSOP DGK package surface mount SMD bridge sensor strain gauge current shunt data acquisition
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle