LM224KDR - 30V, 1.2MHz Quad Op Amp | Texas Instruments
MPN: LM224KDR ✓ AktifLM224KDR Genel Bakış
An operational amplifier is an analog building block that amplifies the voltage difference between its non-inverting and inverting inputs. The LM224 contains four independent, high-gain, frequency-compensated amplifiers in one package. This quad arrangement reduces board area and component count in designs requiring multiple amplification channels, such as sensor conditioning, active filtering, instrumentation, and low-frequency control loops.
The principal features include four amplifier circuits, a 30 V maximum supply rating, 1.2 MHz gain-bandwidth product, and 2 kV ESD protection. Frequency compensation is integrated into each amplifier, simplifying implementation of conventional inverting, non-inverting, summing, and comparator-style circuits. The wide supply range supports single-supply operation from batteries and industrial control rails as well as split-supply systems that require a bipolar input or output range.
The LM224 is intended for general-purpose analog designs where a higher-performance precision amplifier is unnecessary. Its bandwidth is suitable for low-frequency instrumentation and feedback-control paths, while the integrated ESD protection improves robustness in electrically noisy equipment. Designers must still observe the limits for input common-mode voltage, output swing, output current, supply voltage, and temperature when designing around the amplifier.
Typical applications include industrial sensor interfaces, process-control signal conditioning, audio preamplification, power-supply feedback networks, active filters, and general instrumentation. Four amplifiers in one package are especially useful when several channels must track similar bandwidth, supply, and environmental requirements. In multi-channel designs, consistent grounding and decoupling remain important for preventing channel-to-channel coupling.
For PCB implementation, place the input, output, supply, and feedback components close to their associated pins. Decouple each supply rail locally, route sensitive input signals away from switching nodes and high-current paths, and avoid long feedback loops. Verify common-mode and output-swing requirements over the full input range before finalizing the signal chain.
This product record combines manufacturer and distributor information with practical guidance for package selection, signal conditioning, PCB layout, and drop-in replacement evaluation. It highlights where the LM224KDR fits, which parameters need verification during substitution, and which design constraints matter most in industrial and general-purpose analog systems.
Drop-in alternatifler için LM224KDR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LM224KDR (aynı form faktörü ve ayağa oturma) — farklı olan Package, Mounting Type, Amplifier Type, Supply Configuration, AEC-Q100 Qualification.
LM224KN
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM224DR
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler✓ Stokta
$0.1641 / Birim
Veri Şablonunu Görüntüle →LM224DRG3
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LM324KDR
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM2902KDR
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM224KDR Maksimum Değerlendirmeler & Elektriksel Özellikler
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Maximum Supply Voltage | 30 V |
| Gain-Bandwidth Product | 1.2 MHz |
| ESD Protection | 2 kV |
| İşletim Sıcaklığı Aralığı | -25°C to +85°C |
| Paket | 14-pin SOIC (D) |
| Package Width | 0.154 in (3.90 mm) |
| Montaj Türü | Surface mount |
| Supply Configuration | Single supply or split supply |
| Amplifier Architecture | High-gain, frequency-compensated |
| Channel Independence | 4 independent amplifier channels |
| Industrial Temperature Grade | Industrial grade |
LM224KDR 0.154 in (3.90 mm) Pin Yapısı Kılavuzu
LM224KDR (0.154 in (3.90 mm) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: LM224KDR.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LM224KDR için uygundur 6 uygulamas: Industrial Sensor Signal Conditioning, Active Audio Filters, Power-Supply Feedback Control, Process-Control Loops, General Instrumentation, Data Acquisition and Interface Conditioning.
Industrial Sensor Signal Conditioning
The LM224KDR suits industrial sensor-conditioning channels because it combines four independent amplifiers, a 30 V maximum supply rating, and a 1.2 MHz gain-bandwidth product in one 14-SOIC package. It can amplify low-level sensor outputs, implement differential-to-single-ended conversion, and build gain stages around transducers whose bandwidth remains well below the amplifier capability. The specified -25°C to +85°C range supports typical industrial environments. Designers should still verify input common-mode range and output swing, place bypass capacitors near the supply pins, and route sensor inputs away from motors and switching power stages to minimize coupled noise.
Önerilen
Active Audio Filters
The LM224KDR is appropriate for low-frequency active filtering and audio preamplification because its 1.2 MHz gain-bandwidth product provides useful bandwidth for common audio and control-band stages. Four amplifiers can implement cascaded filters, balanced input stages, or gain-sharing sections without requiring four separate packages. Single- or split-supply operation supports both ground-referenced and centered-bias audio architectures. Critical design work includes checking output swing, input common-mode limits, stable feedback-network values, and startup behavior. Short feedback paths and a low-impedance analog ground improve channel consistency and reduce susceptibility to switching noise.
Önerilen
Power-Supply Feedback Control
The LM224KDR can provide error amplification, voltage comparison, and feedback shaping in industrial power-conversion systems operating from a single supply or a split supply. Its 30 V maximum supply rating permits use in higher-voltage control environments, while four independent channels allow separate error, current, voltage, and auxiliary functions when their operating requirements permit. The 1.2 MHz bandwidth is well suited to many low-frequency control loops but may require compensation review in high-bandwidth converters. Engineers should validate stability, output-current demand, common-mode limits, and power-supply bypass placement before using it inside a compensation loop.
Önerilen
Process-Control Loops
The LM224KDR fits low-frequency process-control loops requiring several analog signal channels around the same regulated supply. Each of its four high-gain, frequency-compensated amplifiers can form a noninverting amplifier, inverting summer, comparator, or active-filter stage, reducing board area in controllers with multiple analog channels. Its -25°C to +85°C operating specification suits industrial equipment, while the 30 V supply capability accommodates higher-voltage I/O stages. Use separate input filtering where sensor leads are long, maintain consistent reference grounding, and confirm that each channel remains within its common-mode and output-swing limits over the complete process range.
Önerilen
General Instrumentation
The LM224KDR provides a compact four-channel analog front end for laboratory and industrial instrumentation that needs amplification but not precision-performance specifications. Typical uses include buffer stages, differential amplifiers, gain controls, and active filters. The 14-SOIC package simplifies assembly and the 1.2 MHz gain-bandwidth product supports bandwidth requirements commonly encountered in slow measurement paths. Because the LM224 is a general-purpose amplifier, instrument designers should calculate offset, bias-current, noise, and output-swing contributions against the measurement budget. A stable reference, local supply bypass, and guarded high-impedance input layout are essential for repeatable measurements.
Önerilen
Data Acquisition and Interface Conditioning
The LM224KDR is useful in data-acquisition systems requiring several conditioned channels before conversion or digital processing. Four amplifier sections can handle sensor buffers, differential inputs, level shifting, and anti-alias filter stages within the bandwidth supported by the 1.2 MHz gain-bandwidth product. Single-supply operation can simplify systems that share a 5 V or 12 V rail, while split supplies provide more signal headroom for bipolar sensors. Place input and feedback components close to the device, bypass the supply locally, and isolate high-impedance nodes from clocked and switching circuitry. Confirm conversion-driver compatibility and the required settling behavior at the selected closed-loop gain.
Önerilen
Mühendislik referans verileri: LM224KDR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LM224K | LM224DR | LM224DRG3 | LM324KDR | LM2902KDR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-SOIC (D) | 14-SOIC (D) | 14-SOIC (D) | 14-SOIC (D) | 14-SOIC (D) | 14-SOIC (D) |
| Amplifier Circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
Ana Farklılayıcılar
- Four amplifiers are integrated in one 14-SOIC package (karşılaştırma:LM224DR)
- Documented 2 kV ESD protection (karşılaştırma:LM224DRG3)
- Industrial operating range with a 30 V maximum supply (karşılaştırma:LM2902KDR)
Tasarım Notları
Place each bypass capacitor directly between the appropriate supply pin and ground, with the shortest practical return path. Keep amplifier inputs, feedback components, and reference nodes away from switching-node copper and high-current outputs. For long sensor leads, terminate inputs close to the source and use a shielded route or passive filtering before the amplifier. Consistent grounding across all four channels is important when one LM224KDR serves multiple measurement channels.
Do not assume the four amplifier channels can operate outside their input common-mode or output-swing limits. Check the selected feedback gain, bias point, load, and power-rail arrangement against the manufacturer electrical characteristics, especially in single-supply operation. Stable resistor and capacitor values must be selected for the intended closed-loop gain and bandwidth. The 1.2 MHz gain-bandwidth product is not a guarantee that every gain configuration remains stable at the highest frequency.
The LM224KDR includes 2 kV ESD protection, but ESD protection does not remove the need for layout-level noise control. Avoid connecting long unprotected traces directly to sensitive inputs, and keep power and signal returns separate where practical. Use a stable low-impedance analog ground for reference returns and place filtering close to the source of interference. Validate conducted and radiated behavior in the final enclosure because board placement and cable routing can dominate practical ESD immunity.
A substitute with the same 14-SOIC footprint does not automatically preserve every operating condition. Before replacing LM224KDR, compare supply voltage, gain-bandwidth product, input offset, input bias current, common-mode range, output swing, output-current capability, ESD rating, noise, and temperature grade. Verify that the replacement is the required amplifier channel arrangement and that its stability requirements match the existing feedback network.
Uyumluluk Bilgisi
Compliance attributes were not stated in the retrieved product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the current manufacturer product documentation or declarations.