LM224KDR - 30V, 1.2MHz Quad Op Amp | Texas Instruments
MPN: LM224KDR ✓ 啟用中LM224KDR 概覽
An operational amplifier is an analog building block that amplifies the voltage difference between its non-inverting and inverting inputs. The LM224 contains four independent, high-gain, frequency-compensated amplifiers in one package. This quad arrangement reduces board area and component count in designs requiring multiple amplification channels, such as sensor conditioning, active filtering, instrumentation, and low-frequency control loops.
The principal features include four amplifier circuits, a 30 V maximum supply rating, 1.2 MHz gain-bandwidth product, and 2 kV ESD protection. Frequency compensation is integrated into each amplifier, simplifying implementation of conventional inverting, non-inverting, summing, and comparator-style circuits. The wide supply range supports single-supply operation from batteries and industrial control rails as well as split-supply systems that require a bipolar input or output range.
The LM224 is intended for general-purpose analog designs where a higher-performance precision amplifier is unnecessary. Its bandwidth is suitable for low-frequency instrumentation and feedback-control paths, while the integrated ESD protection improves robustness in electrically noisy equipment. Designers must still observe the limits for input common-mode voltage, output swing, output current, supply voltage, and temperature when designing around the amplifier.
Typical applications include industrial sensor interfaces, process-control signal conditioning, audio preamplification, power-supply feedback networks, active filters, and general instrumentation. Four amplifiers in one package are especially useful when several channels must track similar bandwidth, supply, and environmental requirements. In multi-channel designs, consistent grounding and decoupling remain important for preventing channel-to-channel coupling.
For PCB implementation, place the input, output, supply, and feedback components close to their associated pins. Decouple each supply rail locally, route sensitive input signals away from switching nodes and high-current paths, and avoid long feedback loops. Verify common-mode and output-swing requirements over the full input range before finalizing the signal chain.
This product record combines manufacturer and distributor information with practical guidance for package selection, signal conditioning, PCB layout, and drop-in replacement evaluation. It highlights where the LM224KDR fits, which parameters need verification during substitution, and which design constraints matter most in industrial and general-purpose analog systems.
直接替換替代品,適用於 LM224KDR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM224KDR (相同外形與佔位) — 差異在於 Package, Mounting Type, Amplifier Type, Supply Configuration, AEC-Q100 Qualification.
LM224KN
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LM224DR
✅ 直接替換 ⚠️ 規格未經驗證✓ 有庫存
$0.1641 / 單位
查看資料表 →LM224DRG3
✅ 直接替換📋 參考替代品(不在目錄中)
LM224KDR 最大額定值與電氣特性
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Maximum Supply Voltage | 30 V |
| Gain-Bandwidth Product | 1.2 MHz |
| ESD Protection | 2 kV |
| 工作溫度範圍 | -25°C to +85°C |
| 封裝 | 14-pin SOIC (D) |
| Package Width | 0.154 in (3.90 mm) |
| 安裝類型 | Surface mount |
| Supply Configuration | Single supply or split supply |
| Amplifier Architecture | High-gain, frequency-compensated |
| Channel Independence | 4 independent amplifier channels |
| Industrial Temperature Grade | Industrial grade |
LM224KDR 0.154 in (3.90 mm) 腳位配置指南
LM224KDR(0.154 in (3.90 mm) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LM224KDR.
請參閱 資料表 以查看完整腳位配置。
典型應用
LM224KDR 適用於 6 應用s: Industrial Sensor Signal Conditioning, Active Audio Filters, Power-Supply Feedback Control, Process-Control Loops, General Instrumentation, Data Acquisition and Interface Conditioning.
Industrial Sensor Signal Conditioning
The LM224KDR suits industrial sensor-conditioning channels because it combines four independent amplifiers, a 30 V maximum supply rating, and a 1.2 MHz gain-bandwidth product in one 14-SOIC package. It can amplify low-level sensor outputs, implement differential-to-single-ended conversion, and build gain stages around transducers whose bandwidth remains well below the amplifier capability. The specified -25°C to +85°C range supports typical industrial environments. Designers should still verify input common-mode range and output swing, place bypass capacitors near the supply pins, and route sensor inputs away from motors and switching power stages to minimize coupled noise.
推薦
Active Audio Filters
The LM224KDR is appropriate for low-frequency active filtering and audio preamplification because its 1.2 MHz gain-bandwidth product provides useful bandwidth for common audio and control-band stages. Four amplifiers can implement cascaded filters, balanced input stages, or gain-sharing sections without requiring four separate packages. Single- or split-supply operation supports both ground-referenced and centered-bias audio architectures. Critical design work includes checking output swing, input common-mode limits, stable feedback-network values, and startup behavior. Short feedback paths and a low-impedance analog ground improve channel consistency and reduce susceptibility to switching noise.
推薦
Power-Supply Feedback Control
The LM224KDR can provide error amplification, voltage comparison, and feedback shaping in industrial power-conversion systems operating from a single supply or a split supply. Its 30 V maximum supply rating permits use in higher-voltage control environments, while four independent channels allow separate error, current, voltage, and auxiliary functions when their operating requirements permit. The 1.2 MHz bandwidth is well suited to many low-frequency control loops but may require compensation review in high-bandwidth converters. Engineers should validate stability, output-current demand, common-mode limits, and power-supply bypass placement before using it inside a compensation loop.
推薦
Process-Control Loops
The LM224KDR fits low-frequency process-control loops requiring several analog signal channels around the same regulated supply. Each of its four high-gain, frequency-compensated amplifiers can form a noninverting amplifier, inverting summer, comparator, or active-filter stage, reducing board area in controllers with multiple analog channels. Its -25°C to +85°C operating specification suits industrial equipment, while the 30 V supply capability accommodates higher-voltage I/O stages. Use separate input filtering where sensor leads are long, maintain consistent reference grounding, and confirm that each channel remains within its common-mode and output-swing limits over the complete process range.
推薦
General Instrumentation
The LM224KDR provides a compact four-channel analog front end for laboratory and industrial instrumentation that needs amplification but not precision-performance specifications. Typical uses include buffer stages, differential amplifiers, gain controls, and active filters. The 14-SOIC package simplifies assembly and the 1.2 MHz gain-bandwidth product supports bandwidth requirements commonly encountered in slow measurement paths. Because the LM224 is a general-purpose amplifier, instrument designers should calculate offset, bias-current, noise, and output-swing contributions against the measurement budget. A stable reference, local supply bypass, and guarded high-impedance input layout are essential for repeatable measurements.
推薦
Data Acquisition and Interface Conditioning
The LM224KDR is useful in data-acquisition systems requiring several conditioned channels before conversion or digital processing. Four amplifier sections can handle sensor buffers, differential inputs, level shifting, and anti-alias filter stages within the bandwidth supported by the 1.2 MHz gain-bandwidth product. Single-supply operation can simplify systems that share a 5 V or 12 V rail, while split supplies provide more signal headroom for bipolar sensors. Place input and feedback components close to the device, bypass the supply locally, and isolate high-impedance nodes from clocked and switching circuitry. Confirm conversion-driver compatibility and the required settling behavior at the selected closed-loop gain.
推薦
工程參考資料,適用於 LM224KDR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM224K | LM224DR | LM224DRG3 | LM324KDR | LM2902KDR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-SOIC (D) | 14-SOIC (D) | 14-SOIC (D) | 14-SOIC (D) | 14-SOIC (D) | 14-SOIC (D) |
| Amplifier Circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
主要差異化特點
- Four amplifiers are integrated in one 14-SOIC package (對比LM224DR)
- Documented 2 kV ESD protection (對比LM224DRG3)
- Industrial operating range with a 30 V maximum supply (對比LM2902KDR)
設計說明
Place each bypass capacitor directly between the appropriate supply pin and ground, with the shortest practical return path. Keep amplifier inputs, feedback components, and reference nodes away from switching-node copper and high-current outputs. For long sensor leads, terminate inputs close to the source and use a shielded route or passive filtering before the amplifier. Consistent grounding across all four channels is important when one LM224KDR serves multiple measurement channels.
Do not assume the four amplifier channels can operate outside their input common-mode or output-swing limits. Check the selected feedback gain, bias point, load, and power-rail arrangement against the manufacturer electrical characteristics, especially in single-supply operation. Stable resistor and capacitor values must be selected for the intended closed-loop gain and bandwidth. The 1.2 MHz gain-bandwidth product is not a guarantee that every gain configuration remains stable at the highest frequency.
The LM224KDR includes 2 kV ESD protection, but ESD protection does not remove the need for layout-level noise control. Avoid connecting long unprotected traces directly to sensitive inputs, and keep power and signal returns separate where practical. Use a stable low-impedance analog ground for reference returns and place filtering close to the source of interference. Validate conducted and radiated behavior in the final enclosure because board placement and cable routing can dominate practical ESD immunity.
A substitute with the same 14-SOIC footprint does not automatically preserve every operating condition. Before replacing LM224KDR, compare supply voltage, gain-bandwidth product, input offset, input bias current, common-mode range, output swing, output-current capability, ESD rating, noise, and temperature grade. Verify that the replacement is the required amplifier channel arrangement and that its stability requirements match the existing feedback network.
合規資訊
Compliance attributes were not stated in the retrieved product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the current manufacturer product documentation or declarations.