STMicroelectronics

LM324WDT - Low-Power Quad Op Amp | STMicroelectronics | Industrial

MPN: LM324WDT ✗ Son Kullanım Zamanı
3 V to 32 V Vdss Low input bias current Id 14-SO SOIC Package
MOQ: 1 |

LM324WDT Genel Bakış

STMicroelectronics LM324WDT is a low-power, general-purpose quadruple operational amplifier with four independent amplifiers, push-pull output capability, and a 14-pin SOIC package. The device operates from 3 V to 32 V on a single supply and combines four channels with low power consumption and low input bias current. Its 14-SO configuration supports common industrial signal-conditioning, control, sensing, and low-frequency analog circuits.

A quad operational amplifier is a semiconductor containing four independent high-gain amplifier sections in one package. An operational amplifier compares voltages applied to its inverting and non-inverting inputs and drives its output according to the difference between them. The quad format belongs to the broader analog-amplifier hierarchy and can replace four separate single-channel amplifier packages when the channels do not require isolated supplies.

The LM324WDT's principal features include four amplifier circuits, a push-pull output stage, low input bias current, low power consumption, and high open-loop voltage gain. The 3 V to 32 V operating-voltage range allows operation from regulated 5 V systems through higher industrial supply rails. Operating all four channels from one package also reduces board area, although common power and ground connections require careful layout planning.

Internally, the device uses the widely established LM324 universal standard amplifier architecture with integrated phase-compensation capacitors. This architecture prioritizes low cost, broad supply-voltage compatibility, and ease of general-purpose analog design rather than the very low offset, low noise, high speed, or rail-to-rail output characteristics found in precision amplifiers. The push-pull output structure supports bidirectional output drive within the available supply limits.

Typical uses include low-frequency sensor amplification, transducer signal conditioning, current-to-voltage conversion, voltage comparison, basic active filtering, control-loop amplification, and general instrumentation. The four channels can process related signals or perform independent functions such as buffering, error amplification, summing, and threshold detection. For battery-operated or power-sensitive systems, the low-power architecture is especially useful when the required signal bandwidth remains modest.

For stable operation, follow the manufacturer datasheet when selecting supply bypassing capacitors, handling input and output signals near the supply rails, and accommodating output-current limits. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be biased to a defined potential rather than left floating. The wide input and output common-mode limitations of the LM324 family should be checked before using it in high-side sensing or rail-to-rail signal chains.

This page combines exact catalog information, pin-level implementation guidance, same-package replacement choices, and application-oriented design notes. It helps engineers determine whether the LM324WDT's four-channel, 3 V to 32 V general-purpose architecture is appropriate for a new design or an existing 14-SO PCB.

Drop-in alternatifler için LM324WDT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LM324WDT (aynı form faktörü ve ayağa oturma) — farklı olan Package, Amplifier Type, Input Offset Voltage, Supply Voltage Range, Operating Temperature Range.

Texas Instruments
Package: 14-pin SOIC (D)
Input Offset Voltage: 3 mV
Operating Temperature Range: 0 C to +70 C
İle Karşılaştır LM324WDT →
STMicroelectronics
Package: 14-pin SO package
Amplifier Type: 1 general-purpose operational amplifier
İle Karşılaştır LM324WDT →
Texas Instruments
Package: SOIC (D), 14 pins
Amplifier Type: General Purpose
Input Offset Voltage: 2 mV (max, BA version)
İle Karşılaştır LM324WDT →
Texas Instruments
Package: 14-pin SOIC
Amplifier Type: Quad general-purpose operational amplifier
Input Offset Voltage: Plus or minus 2 mV maximum for BA versions at 25 C
İle Karşılaştır LM324WDT →
STMicroelectronics
Package: SOIC-14
Amplifier Type: General Purpose
Input Offset Voltage: 2 mV typical
İle Karşılaştır LM324WDT →
STMicroelectronics
Amplifier Type: General Purpose
Supply Voltage Range: 3 V to 30 V (single supply) or +/-1.5 V to +/-15 V
İle Karşılaştır LM324WDT →

LM324DT

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
STMicroelectronics
📦 14-SO SOIC
4 · 3 V to 32 V · ±1.5 V to ±16 V · 700 µA typical · 2 mV typical · 20 nA typical · 1.3 MHz typical · 0.4 V/µs typical

✗ Stokta Yok

$0.0827 / Birim

Veri Şablonunu Görüntüle →

LM324QT

✅ Yerleştirme
STMicroelectronics
📦 14-SO SOIC
General Purpose · 4 · 1.3 MHz · 0.4 V/us · 100 dB · 375 uA · 3 V to 30 V (single supply) or +/-1.5 V to +/-15 V · Includes ground (negative rail)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM324DR

✅ Yerleştirme
Texas Instruments
📦 14-SO SOIC
Quad general-purpose operational amplifier · 4 · Four independent high-gain frequency-compensated operational amplifiers · 3 V to 36 V for B versions · Plus or minus 2 mV maximum for BA versions at 25 C · 2 kV HBM for B, BA, and K versions · Internal RF and EMI filter for B and BA versions · Single supply or split supply

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM324ADR

✅ Yerleştirme
Texas Instruments
📦 14-SO SOIC
4 circuits · 30 V · 1.2 MHz · 3 mV · Single supply or split supply · Internally compensated · True differential inputs · 14 pins

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM324BAIDR

✅ Yerleştirme
Texas Instruments
📦 14-SO SOIC
4 · 3 V to 36 V · 1.2 MHz · 2 mV (max, BA version) · Push-Pull · -40C to +85C · SOIC (D), 14 pins · Surface Mount

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM324WDT Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type General-purpose operational amplifier
Number of Amplifier Channels 4 channels
Çıkış Türü Push-pull
Supply Voltage Range 3 V to 32 V
Architecture Quad operational amplifier
Input Bias Current Low input bias current
Power Consumption Low power consumption
Open-Loop Voltage Gain High gain
Phase Compensation Integrated capacitors
Paket 14-SO SOIC
Pin Sayısı 14 pins
Montaj Türü Surface mount
Product Type Low-power quad operational amplifier
Compliance RoHS and REACH status not stated
Automotive Qualification AEC-Q100 status not stated

LM324WDT Pin Yapısı

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pin 1 OUT1 — Amplifier 1 output
Pin 2 -IN1 — Amplifier 1 inverting input
Pin 3 +IN1 — Amplifier 1 non-inverting input
Pin 4 V- — Negative supply or ground connection
Pin 5 +IN2 — Amplifier 2 non-inverting input
Pin 6 -IN2 — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 OUT3 — Amplifier 3 output
Pin 9 -IN3 — Amplifier 3 inverting input
Pin 10 +IN3 — Amplifier 3 non-inverting input
Pin 11 V+ — Positive supply connection
Pin 12 -IN4 — Amplifier 4 inverting input
Pin 13 +IN4 — Amplifier 4 non-inverting input
Pin 14 OUT4 — Amplifier 4 output

Tipik Uygulamalar

LM324WDT için uygundur 6 uygulamas: Industrial Sensor Signal Conditioning, Current-to-Voltage Conversion, Control-System Error Amplifier, Audio and Communication Buffering, Active Filtering and Summing, Battery-Powered Portable Instrumentation.

🏭

Industrial Sensor Signal Conditioning

The LM324WDT is well suited to low-frequency industrial sensor conditioning because four low-power amplifier channels can buffer, scale, and offset several related sensor signals on one board. Its 3 V to 32 V supply range supports 5 V instrumentation as well as higher-voltage industrial rails. Use one channel for the input amplifier and others for offset correction or active filtering. The designer must keep signals inside the LM324's specified common-mode and output-swing ranges, because the device is not rail-to-rail at input or output.

⚡

Current-to-Voltage Conversion

The LM324WDT can implement four current-to-voltage conversion or transimpedance stages when the required signal bandwidth is modest. Low input bias current helps reduce error when working with high-impedance sensors, while the four-channel architecture consolidates multiple measurements into one 14-SO package. Place the amplifier close to the sensing node to minimize leakage and parasitic capacitance, and add compensation appropriate to the feedback network. Verify stability with the intended source capacitance rather than relying only on nominal bandwidth.

🔧

Control-System Error Amplifier

The LM324WDT provides four low-power channels for error amplification, actuator feedback, threshold comparison, and auxiliary control functions in basic analog control systems. Its high open-loop gain supports closed-loop error correction, while the 3 V to 32 V supply range permits operation from low-voltage controls to higher-voltage industrial buses. Four channels reduce footprint compared with separate packages, but common ground and supply routing can couple noise between channels. Separate sensitive feedback routing from power-intensive actuator paths and use local supply bypassing.

🎧

Audio and Communication Buffering

The LM324WDT can serve as a general-purpose buffer or gain stage in line-level audio, communications, and other low-frequency analog systems. Its push-pull output stage drives the output in both directions more effectively than an open-collector implementation, while the four-channel format supports repeated buffering or mixing functions. The device is best suited to signals that remain within its input and output swing limits. Confirm noise, bandwidth, and slew-rate requirements for the highest-frequency channel before using it in precision audio paths.

📡

Active Filtering and Summing

The LM324WDT can implement active filters, summers, difference amplifiers, and threshold detectors when low-to-moderate frequencies and simple gain settings are sufficient. Four independent channels permit a cascaded second-order filter, a summing stage, and two utility channels within one package. Passive component tolerances directly influence gain and cutoff accuracy, so use suitable resistor and capacitor tolerances for the required response. Keep the summing-node impedances balanced and avoid driving capacitive loads that could compromise stability.

📱

Battery-Powered Portable Instrumentation

The LM324WDT is appropriate for portable, battery-powered instrumentation that needs several low-frequency analog channels and can operate from a compact supply. Its low-power operation and low input bias current help reduce consumption and loading from high-impedance sensors, while the four-channel package minimizes board area. The minimum 3 V operating supply supports energy-efficient embedded designs. For portable products, verify supply current across the complete output range and confirm that the input common-mode range includes the sensor's operating voltage.

Where can I buy LM324WDT online?
The LM324WDT can be requested through the Request a Quote form on this page for the STMicroelectronics 14-SO version. The form supports current sourcing, quantity review, lead-time confirmation, and delivery questions without relying on a static price. The requested MPN is LM324WDT, so the quote should explicitly identify the manufacturer and package before order placement.
What is the price of LM324WDT?
The current price of LM324WDT should be confirmed through the Request a Quote form on this page. Quote handling is appropriate because availability, order quantity, and manufacturer allocation can affect the final commercial terms. State the required quantity, target package, and delivery location in the request so the commercial response can be matched to the exact LM324WDT configuration.
What is the lead time for LM324WDT?
The current LM324WDT lead time should be confirmed through the Request a Quote form on this page. Lead time can vary with manufacturer allocation, order quantity, and the authorized manufacturing channel. The exact suffix matters: LM324WDT identifies a specific 14-SO ordering configuration, and the quote request should retain that full suffix to avoid receiving a different package or temperature option.
Is LM324WDT in stock?
Current LM324WDT inventory should be checked through the Request a Quote form on this page. Some catalog results identify the part as stocked, but live inventory is transactional and may change independently of product-page indexing. A quote request provides the most appropriate confirmation for the exact manufacturer, quantity, package, and required delivery date.
What are the key specifications of LM324WDT that engineers should know?
The LM324WDT is a four-channel, general-purpose operational amplifier in a 14-SO package. According to the manufacturer documentation, it supports a 3 V to 32 V supply range and uses push-pull outputs, while its defining characteristics include low power consumption, low input bias current, and high open-loop gain. Four integrated channels can simplify board layout and reduce the number of separate amplifier packages.
What is the operating voltage of LM324WDT?
The LM324WDT operates from 3 V to 32 V on a single supply. According to the manufacturer product description for the LM324 universal standard family, this range supports low-voltage logic-adjacent circuits as well as higher-voltage industrial systems. The actual signal swing and input common-mode range are narrower than the supply limits, so those conditions must be checked separately in the datasheet.
Where can I download the LM324WDT datasheet PDF?
The LM324WDT datasheet can be reached through the datasheet link on this page, which points to the identified 14-page LM324WDT document hosted by AllDataSheet. Use the manufacturer's application information together with that datasheet to confirm electrical limits, pin functions, recommended operating conditions, and package details before releasing a production design.
Where can I find the LM324WDT pinout?
The LM324WDT uses the standard 14-SO quad-op-amp arrangement, with pinout details provided in the pin table on this page. Pins 1, 7, 8, and 14 are amplifier outputs; the non-inverting inputs are pins 3, 5, 10, and 13; the inverting inputs are pins 2, 6, 9, and 12. Supply pins are 11 for positive supply and 4 for negative supply or ground.
LM324WDT vs LM324QT - which is better for a 14-SO design?
LM324WDT and LM324QT are both identified as 14-SO general-purpose quad operational amplifiers, but their ordering suffixes may correspond to different manufacturer packaging or temperature options. According to catalog descriptions, both use the same four-channel amplifier category and low-power characteristics. Confirm the exact suffix definition and pin compatibility in each manufacturer's datasheet before changing the released BOM.
When should I choose LM324WDT over LM324DT?
Choose LM324WDT when the exact ordering configuration and 14-SO footprint match the design requirement; choose LM324DT only after confirming that its electrical ratings, temperature grade, and pin arrangement are equivalent. Both parts belong to the same LM324 family, but suffix differences can alter orderable packaging. For a drop-in substitution, verify the manufacturer pin-description table rather than relying only on the family name.
What can replace LM324WDT?
The closest replacements are 14-SO LM324-family devices whose pin description, supply range, channel count, and electrical limits match the original. Candidates include LM324QT from the same manufacturer and compatible LM324DR, LM324ADR, and LM324BA devices from other manufacturers. Every replacement still requires a manufacturer-specific review of common-mode range, output swing, supply current, stability, and temperature grade.
Is LM324WDT the same as LM324DR?
LM324WDT and LM324DR can occupy the same 14-SO footprint family, but they are not interchangeable solely because their package names match. According to LM324-family documentation, the key checks are four amplifier channels, pin-to-pin connections, 3 V to 32 V operation, input and output common-mode limits, and output-current capability. A direct substitution also requires review of load stability and temperature grade.
What is the best TI equivalent for LM324WDT?
A Texas Instruments LM324-family device such as LM324DR can be considered when its 14-SO pinout and electrical characteristics satisfy the circuit. The TI amplifier discussion identifies LM324-family drop-in options, while the cross-reference data supports checking pin-compatible alternatives. Before approval, compare input offset, bias current, bandwidth, slew rate, output swing, noise, and load-capacitance stability with LM324WDT.
Is LM324WDT suitable for industrial sensor conditioning?
Yes, LM324WDT is suitable for many low-frequency industrial sensor-conditioning circuits. Its 3 V to 32 V supply range, low power consumption, low input bias current, and four independent channels support current-to-voltage conversion, buffering, filtering, and threshold detection. The main limitations are the non-rail-to-rail input and output ranges, modest bandwidth, and the need to stay within the specified common-mode limits.
Why should unused LM324WDT amplifier inputs be biased?
Unused LM324WDT amplifier inputs should be tied to a defined voltage rather than allowed to float. According to standard operational-amplifier design practice, an undefined input can create offset errors, oscillation, or unpredictable output behavior near the supply rails. Connecting each unused input to a suitable mid-supply reference or another valid bias point helps keep the unused amplifier channel stable.

Mühendislik referans verileri: LM324WDT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose LM324WDT for new low-frequency analog designs that need four general-purpose amplifier channels, low power consumption, and operation from 3 V to 32 V. Its 14-SO footprint is appropriate when the PCB already uses the standard LM324 pin arrangement. Choose LM324DT when that ordering suffix matches the required manufacturer, temperature, and packaging configuration more closely. Choose LM324QT when its grade and qualification are preferable within the same manufacturer family. LM324DR, LM324ADR, and LM324BA are useful cross-brand options when their individual electrical limits, temperature ratings, and stability characteristics meet the circuit requirements. None should be approved solely by package appearance: verify every pin, the common-mode input range, output swing, supply current, load capability, and capacitive-load behavior before releasing a drop-in replacement.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LM324DT LM324QT LM324DR LM324ADR LM324BA
Package 14-SO SOIC 14-SO SOIC 14-SO SOIC 14-SO SOIC 14-SO SOIC 14-SO SOIC
Brand STMicroelectronics STMicroelectronics STMicroelectronics Texas Instruments Texas Instruments Texas Instruments
Amplifier Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Product Category General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Ana Farklılayıcılar

  • Four independent amplifiers in one 14-SO package (karşılaştırma:LM324DR)
  • Single-supply operation across a wide voltage range (karşılaştırma:LM324QT)
  • Push-pull output stage for bidirectional drive (karşılaştırma:LM324ADR)
  • Low-power and low-input-bias characteristics (karşılaştırma:LM324BA)

Tasarım Notları

Place the required supply-decoupling capacitor immediately between pins 11 and 4, with a short and low-inductance return path. Because all four amplifiers share the same supply pins, supply disturbance can affect every channel simultaneously. Add a second local bypass capacitor when the manufacturer recommends it, and keep high-current return paths away from the sensitive input and feedback traces.

Route each non-inverting input, inverting input, and output directly to its associated circuit nodes. Keep feedback components close to pins 2, 6, 9, and 12 to minimize parasitic capacitance and feedback-loop area. Treat the exposed circuit board under the SOIC body as a thermal and electrical consideration even though this package does not use a dedicated exposed pad.

Do not assume that the 3 V to 32 V supply range also defines the usable input or output range. Check the common-mode input limits and output swing against the actual signal. Similarly, tie unused amplifier inputs to a defined bias voltage. Leaving an input floating can make the associated output unpredictable and may introduce instability into adjacent measurement circuits.

Use short traces for high-impedance sensor inputs and keep them away from supply and output routing. The LM324 family is intended primarily for low-frequency general-purpose operation, so high-gain layouts can amplify thermal noise and layout leakage. Select resistor values that avoid excessive loading and maintain feedback stability at the lowest expected signal frequency and the highest expected capacitive load.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer listings identify the LM324WDT as a general-purpose 14-SO amplifier but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Veri doğrulanma tarihi: 2026-11-17 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

LM324WDT LM324WDT datasheet LM324WDT datasheet pdf LM324WDT pinout LM324WDT schematic LM324WDT equivalent LM324WDT replacement LM324WDT cross reference LM324WDT vs LM324QT LM324WDT 14-SO footprint LM324WDT application circuit STMicroelectronics LM324WDT LM324WDT price LM324WDT stock LM324WDT quad op amp

İlgili Bileşenler ve Terimler

STMicroelectronics Texas Instruments LM324WDT LM324DT LM324QT LM324DR LM324ADR LM324BA operational amplifier quad operational amplifier general-purpose amplifier analog amplifier semiconductor low-dropout power rail push-pull output stage input bias current open-loop voltage gain common-mode input range signal conditioning active filtering current-to-voltage conversion 14-SO SOIC SOIC family surface-mount package RoHS REACH AEC-Q100
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle