STMicroelectronics

LM393AWDT - Dual Open-Collector Comparator | STMicroelectronics

MPN: LM393AWDT ✓ Aktif
Single supply Vdss 8-pin SOIC Package
MOQ: 1 |

LM393AWDT Genel Bakış

The STMicroelectronics LM393AWDT is a low-power dual voltage comparator with two independent comparator channels, open-collector outputs, and a single-supply operating architecture packaged in an 8-pin SOIC. It is designed for comparing two input voltages and producing a digital logic state when the selected channel changes polarity.

A voltage comparator is a semiconductor component that evaluates one input voltage against another and reports the relationship as a logic output. The LM393 belongs to the comparator hierarchy within analog and mixed-signal semiconductors. Its two independent channels allow one device to perform two threshold, level-detection, or window-monitoring functions without sharing internal signal paths.

The principal feature of the LM393AWDT is its pair of open-collector outputs. Each output can pull a logic node low, while an external pull-up resistor establishes the high state. This architecture works with the voltage levels used by many digital systems and allows multiple open-collector outputs to share a bus when the design requires wired logic. The device also includes two comparators in one 8-pin SOIC, reducing board area compared with two separate single-channel packages.

The two internal channels are electrically independent, supporting simultaneous comparisons such as upper-limit and lower-limit monitoring. Input and output pins are arranged in a conventional SOIC-8 footprint. Because the outputs are open collector rather than push-pull, circuit design must include suitable pull-up components and account for output rise time, load capacitance, and bus capacitance.

Typical uses include industrial control and automation, sensor threshold conditioning, battery and power-system monitoring, industrial control and automation, and embedded control systems. In each case, the comparator converts an analog voltage relationship into a logic signal that can drive an input, control an interrupt, or indicate a system state.

Layout should keep input traces short and route output traces away from sensitive analog nodes. Place pull-up resistors near the driven logic input when long traces or slow bus edges are possible. Verify the logic family, supply range, input common-mode limits, output sink capability, and propagation timing against the manufacturer datasheet before releasing the design.

This product page combines the LM393AWDT device description, pin assignment, package information, engineering application guidance, comparison parameters, and qualified drop-in alternatives. It is intended to help designers select the comparator quickly while completing the mandatory electrical and footprint checks for a production circuit.

Drop-in alternatifler için LM393AWDT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LM393AWDT (aynı form faktörü ve ayağa oturma) — farklı olan Package, Output Type, Operating Temperature Range, Number of Channels, Response Time.

Texas Instruments
Package: SOIC-8 (D), 3.90 mm body width
Operating Temperature Range: 0 °C to +70 °C
Number of Channels: 2
İle Karşılaştır LM393AWDT →
STMicroelectronics
Package: SOIC-8
Output Type: Open Collector
Operating Temperature Range: -40°C to +105°C
İle Karşılaştır LM393AWDT →
Texas Instruments
Package: 8-pin SOIC (D)
Output Type: Open drain
Operating Temperature Range: -40°C to +125°C
İle Karşılaştır LM393AWDT →

LM393ADT

✅ Yerleştirme
STMicroelectronics
📦 SOIC-8
General-purpose dual differential comparator · 2 channels · 2 independent channels · Rail-to-rail · Open-collector · Single supply or split supply

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM393DT

✅ Yerleştirme
STMicroelectronics
📦 SOIC-8
2 · 2 V to 36 V · ±1 V to ±18 V · 0.4 mA (typical) · 2 mV (typical) · 25 nA (typical) · 1.3 µs (typical) · Open Collector

✓ Stokta

$0.0461 / Birim

Veri Şablonunu Görüntüle →

LM393BDR

✅ Yerleştirme
📦 SOIC-8
Provides 2 comparator channels versus 2 channels for LM393AWDT, a 0 channel-count difference; manufacturer-specific electrical limits and timing must be matched.

📋 Katalogda Olmayan Referans Alternatifi

LM393LVDR

✅ Yerleştirme
Texas Instruments
📦 SOIC-8
Dual general-purpose voltage comparator · 2 channels · 1.65 V to 5.5 V · Rail-to-rail · Open drain · 3000 uV · 0.1 mA · 600 ns

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM393DR

✅ Yerleştirme
Texas Instruments
📦 SOIC-8
Texas Instruments · LM393DR · Dual Differential Comparator · 2 · Open-Collector · 2 V to 36 V · ±1 V to ±18 V · 1 mV

✓ Stokta

$0.11 / Birim

Veri Şablonunu Görüntüle →

LM393AWDT Maksimum Değerlendirmeler & Elektriksel Özellikler

Comparator Type General-purpose voltage comparator
Number of Channels 2 channels
Çıkış Türü Open-collector
Supply Architecture Single supply
Paket 8-pin SOIC
Montaj Türü Surface mount

LM393AWDT Pin Yapısı

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUT1 — Comparator 1 open-collector output
Pin 2 IN1- — Comparator 1 inverting input
Pin 3 IN1+ — Comparator 1 non-inverting input
Pin 4 GND — Ground connection
Pin 5 IN2+ — Comparator 2 non-inverting input
Pin 6 IN2- — Comparator 2 inverting input
Pin 7 OUT2 — Comparator 2 open-collector output
Pin 8 VCC — Positive supply connection

Tipik Uygulamalar

LM393AWDT için uygundur 6 uygulamas: Industrial Sensor Threshold Detection, Battery Voltage Monitoring, Power-Supply Sequencing Control, Embedded Control Logic, Window and Limit Monitoring, General-Purpose Logic Interface.

🏭

Industrial Sensor Threshold Detection

The LM393AWDT is well suited to industrial sensor threshold detection because it provides two independent comparator channels in one 8-pin SOIC. One channel can compare a conditioned sensor voltage with an upper threshold, while the second handles a lower threshold or another control signal. Its open-collector outputs can pull alarm or controller inputs low, with external pull-up resistors establishing the active-high digital state. This arrangement reduces component count while preserving independent channels. The design must keep sensor traces short, provide a stable reference for threshold generation, and confirm that the signal and supply voltages remain inside the comparator’s documented input common-mode and supply ranges.

⚡

Battery Voltage Monitoring

The LM393AWDT can implement battery or supply-rail monitoring using its two independent voltage-comparison channels. One channel may detect an undervoltage condition while the other identifies an overvoltage condition, producing separate open-collector flags for an embedded controller. The 8-pin SOIC package reduces board area, and the open-collector interface allows each flag to share a suitably rated pull-up arrangement. Because comparator accuracy depends on the reference and divider tolerances, the design should account for resistor tolerance, input offset, noise, and propagation delay. Supply current and operating-range limits must also be checked against the target battery platform before production release.

⚡

Power-Supply Sequencing Control

The LM393AWDT is applicable to basic power-supply sequencing because two independent comparator channels can evaluate different rail thresholds. One open-collector output can indicate that a rail has crossed an upper boundary, while the other can monitor a lower rail or a delayed enable signal. External pull-up resistors define the logic-high state, making the outputs usable with controller inputs and discrete control stages. The implementation should include hysteresis or filtering where threshold chatter would be harmful, and it must respect each comparator channel’s propagation delay. The device does not directly regulate a supply, so its role is decision and control rather than power conversion.

🧩

Embedded Control Logic

The LM393AWDT can convert analog conditions into logic decisions in an embedded control system. Two independent channels can handle separate control events, such as a temperature threshold and a pressure or position limit, with each open-collector output connected to a controller input through an appropriate pull-up. Combining both channels in one 8-pin SOIC simplifies routing compared with two separate single-channel comparators. For reliable operation, route the reference and sensor paths away from switching nodes, use a defined ground return, and check the input common-mode range at every temperature. Firmware should also allow for the propagation delay and any threshold hysteresis introduced by the external network.

📺

Window and Limit Monitoring

The two-channel architecture of the LM393AWDT naturally supports upper- and lower-limit monitoring in feedback-control and protection systems. Each open-collector output can represent a separate out-of-range condition, allowing a controller to distinguish high-limit, low-limit, and in-range states. The 8-pin SOIC package makes the LM393AWDT suitable for compact analog supervision sections, while the open-collector outputs provide flexible interface options with pull-up resistors. Reference accuracy, input offset, and resistor tolerance determine the effective threshold limits, so these errors should be included in the safety margin. Temperature and propagation-delay effects must also be evaluated for dynamic control loops.

🔧

General-Purpose Logic Interface

The LM393AWDT is useful as a general-purpose logic interface when an analog voltage must be converted into a digital state for another logic block. Its two open-collector outputs can drive controller inputs, fault inputs, or discrete gate-control circuits, provided the required pull-up voltage and sink current are compatible. The 8-pin SOIC footprint supports compact placement near the sensed signal, reducing sensitivity to noise and delay. Designers should place pull-up resistors near the receiving input, avoid excessive capacitive loading on the output node, and use filtering if the compared signal crosses its threshold slowly. The manufacturer datasheet should be consulted for input offset, response time, and output-current limits.

What is LM393AWDT?
The LM393AWDT is an STMicroelectronics low-power IC containing two independent general-purpose voltage comparators with open-collector outputs in an 8-pin SOIC. According to the STMicroelectronics datasheet, each channel compares an inverting and a non-inverting input and changes its output state when the differential input polarity changes. The two channels are independent, allowing two separate threshold or level-detection functions in one package.
What is the LM393AWDT pinout?
The LM393AWDT uses a standard 8-pin SOIC comparator pinout: pin 1 is OUT1, pin 2 is IN1−, pin 3 is IN1+, pin 4 is GND, pin 5 is IN2+, pin 6 is IN2−, pin 7 is OUT2, and pin 8 is VCC. According to the STMicroelectronics datasheet, the exposed functions correspond to two independent comparator channels sharing supply and ground connections.
Where can I download the LM393AWDT datasheet PDF?
The LM393AWDT datasheet PDF is available from the manufacturer-linked document listed on this page and from the STMicroelectronics product documentation. It defines the 8-pin SOIC pin assignment, open-collector outputs, electrical limits, and typical application characteristics. Use the manufacturer document as the controlling reference for supply voltage, input common-mode range, propagation delay, and thermal limits.
How does the LM393AWDT open-collector output work?
Each LM393AWDT open-collector output can pull its connected node low but cannot actively drive that node high. An external pull-up resistor is required to establish the high logic level. According to the STMicroelectronics datasheet, this arrangement supports wired-logic applications and requires the designer to select a resistor that satisfies the required sink current while maintaining a suitable rising edge.
What can replace LM393AWDT?
LM393AWDT can be replaced only by a dual comparator with the same 8-pin SOIC footprint, compatible input and output pin functions, and suitable electrical ratings. The closest choices identified include LM393ADT and LM393DT from STMicroelectronics, plus LM393BDR, LM393LVDR, and LM393DR from other manufacturers. Confirm supply range, input common-mode limits, output behavior, timing, and temperature grade before substitution.
Is LM393AWDT the same as LM393ADT?
The LM393AWDT and LM393ADT both implement the same dual, open-collector comparator architecture in an 8-pin SOIC, but their ordering suffixes can denote different packaging, reel, or temperature-grade options. The LM393AWDT is ordered in tape-and-reel form with the suffix set used by STMicroelectronics. Review the manufacturer ordering table to confirm the exact temperature, packing, and quality requirements.
Where to buy LM393AWDT online?
Use the Request a Quote form on this page to request LM393AWDT availability, order quantity, and current lead time. The request identifies the exact MPN, LM393AWDT, so the purchasing team can confirm the matching 8-pin SOIC and manufacturing suffix rather than substituting a related but different ordering code. Packaging, minimum order quantity, and shipment quantity should be confirmed with the quotation.
What is the price of LM393AWDT?
The current commercial terms for LM393AWDT are returned through the Request a Quote form on this page. The form permits quantity, shipment destination, target date, and required packaging details to be included in the request. This avoids presenting a stale quantity-break figure and keeps the quotation tied to the exact LM393AWDT ordering code.
What is the lead time for LM393AWDT?
The current LM393AWDT lead time depends on order quantity, inventory position, packaging configuration, and manufacturing status. Submit the requested quantity and target date through the Request a Quote form on this page. The purchasing response should confirm the schedule for the exact 8-pin SOIC device rather than a generic LM393 family part.
Is LM393AWDT in stock?
Inventory for the exact LM393AWDT ordering code can change independently of the broader LM393 family, so availability should be confirmed through the Request a Quote form on this page. Include the required quantity and reel or shipment format in the request. Do not assume that stock for another LM393 suffix satisfies the exact product requirements.
LM393AWDT vs LM393LVDR - which is better for a low-voltage design?
The LM393LVDR is generally the more relevant candidate for a design specifically targeting lower-voltage operation, while the LM393AWDT should be selected when its documented supply and input ranges match the existing circuit. The manufacturer comparison identifies LM393LV as an alternative with a lower voltage range and improved performance characteristics. Confirm the actual rail voltage and timing requirements before choosing.
What is the difference between LM393AWDT and LM393BDR?
Both parts are dual comparator solutions in an 8-pin SOIC, but their manufacturer-specific electrical limits and implementation details must be compared before substitution. The LM393AWDT uses STMicroelectronics open-collector outputs, while the LM393BDR is identified as a Texas Instruments LM393-family alternative. Check supply voltage, common-mode range, propagation delay, and output sink current in the respective datasheets.
When should I choose LM393AWDT over a lower-voltage comparator?
Choose the LM393AWDT when its documented operating range, open-collector interface, and 8-pin SOIC footprint match an established design more closely than a lower-voltage alternative. A reduced-voltage comparator may improve power consumption in some systems but can require rail-level changes or different input-range validation. Select the part whose complete electrical envelope covers the worst-case operating conditions.
Is LM393AWDT suitable for industrial sensor threshold detection?
The LM393AWDT is suitable for industrial threshold detection when its two independent channels, open-collector outputs, and documented operating limits fit the sensor signal range. Each channel can compare a conditioned sensor voltage against a threshold, and the open-collector result can drive an alert or digital control input. Industrial qualification and extended-temperature requirements must be checked separately.
What are the key specifications of LM393AWDT that engineers should know?
The key LM393AWDT specifications are two independent comparator channels, open-collector outputs, single-supply operation, and an 8-pin SOIC package. The device is identified by STMicroelectronics as a low-power, general-purpose dual voltage comparator. Exact supply range, common-mode range, offset voltage, propagation delay, sink current, and temperature limits should be taken from the manufacturer datasheet for the production design.
What is the best Texas Instruments equivalent for LM393AWDT?
The LM393BDR is the closest Texas Instruments candidate identified for a same-footprint replacement of the LM393AWDT because both are dual comparators in an 8-pin SOIC. The LM393LVDR is another option when its lower-voltage range better fits the target rail. Verify pin-level behavior and every worst-case electrical limit because package equality alone does not establish interchangeability.

Mühendislik referans verileri: LM393AWDT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LM393AWDT when an existing 8-pin SOIC design requires two independent general-purpose comparators with open-collector outputs and its documented supply and input ranges cover the circuit. It is particularly practical for threshold detection, rail monitoring, and embedded control interfaces where a wired-logic output is useful. LM393ADT and LM393DT are natural same-family choices when the required ordering suffix, temperature grade, or packing method differs. Consider LM393LVDR when the design intentionally targets a lower-voltage range and its timing and common-mode limits satisfy the application. LM393BDR and LM393DR can support second-source strategies, but their manufacturer-specific electrical limits must be checked against the STMicroelectronics datasheet. In every case, verify pin orientation, output architecture, input common-mode range, propagation delay, sink current, and operating temperature before approving a replacement.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LM393ADT LM393DT LM393BDR LM393LVDR LM393DR
Brand STMicroelectronics STMicroelectronics STMicroelectronics Texas Instruments Texas Instruments Texas Instruments
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Comparator Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount
Special Features Two independent low-power comparator channels Two independent comparator channels Two independent comparator channels LM393 family comparator Lower-voltage-range comparator alternative LM393 family comparator

Ana Farklılayıcılar

  • Two independent channels in one 8-pin SOIC (karşılaştırma:LM393BDR)
  • Direct same-family ordering path (karşılaştırma:LM393ADT)
  • Selection distinction for lower-voltage systems (karşılaştırma:LM393LVDR)

Tasarım Notları

Place the LM393AWDT close to the signals being compared and route pins 2, 3, 5, and 6 away from switching nodes and high-current return paths. A continuous ground plane under the device and a low-impedance connection from pin 4 to the circuit ground reference reduce pickup and common-mode errors. Keep the input traces short because added capacitance, coupled noise, and trace resistance can shift the effective threshold and slow the comparator response.

Use external pull-up resistors for pins 1 and 7 because the LM393AWDT has open-collector outputs. Place each resistor near the corresponding receiver input when the output also drives a bus. Select the resistance using the required sink current, bus capacitance, and desired rising-edge rate. Avoid excessively large pull-up values, which can create slow edges and additional switching noise that may disturb adjacent digital or analog circuitry.

Do not assume that equal pin numbers or equal package dimensions guarantee that another LM393-family device is interchangeable. Confirm pin 1 orientation, the functions of pins 1 through 8, supply limits, input common-mode range, propagation delay, and output sink capability. Also confirm whether the output is open collector or push-pull, since the latter requires a different external interface and pull-up strategy.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact LM393AWDT ordering code. Confirm the current material declarations with STMicroelectronics before using the part in a regulated production design.

Veri doğrulanma tarihi: 2026-11-13 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

LM393AWDT datasheet LM393AWDT pinout LM393AWDT datasheet pdf LM393AWDT equivalent LM393AWDT replacement LM393AWDT cross reference LM393AWDT vs LM393LVDR LM393AWDT price LM393AWDT stock STMicroelectronics LM393AWDT LM393AWDT SOIC-8 pinout LM393AWDT application circuit

İlgili Bileşenler ve Terimler

STMicroelectronics LM393AWDT LM393ADT LM393DT LM393BDR LM393LVDR LM393DR dual voltage comparator comparator analog comparator semiconductor open-collector output single-supply operation SOIC-8 SOIC family surface-mount package input offset voltage propagation delay input common-mode range industrial sensor threshold detection battery voltage monitoring power-supply sequencing embedded control logic wired logic
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle