LM393AWDT - Dual Open-Collector Comparator | STMicroelectronics
MPN: LM393AWDT ✓ 啟用中LM393AWDT 概覽
A voltage comparator is a semiconductor component that evaluates one input voltage against another and reports the relationship as a logic output. The LM393 belongs to the comparator hierarchy within analog and mixed-signal semiconductors. Its two independent channels allow one device to perform two threshold, level-detection, or window-monitoring functions without sharing internal signal paths.
The principal feature of the LM393AWDT is its pair of open-collector outputs. Each output can pull a logic node low, while an external pull-up resistor establishes the high state. This architecture works with the voltage levels used by many digital systems and allows multiple open-collector outputs to share a bus when the design requires wired logic. The device also includes two comparators in one 8-pin SOIC, reducing board area compared with two separate single-channel packages.
The two internal channels are electrically independent, supporting simultaneous comparisons such as upper-limit and lower-limit monitoring. Input and output pins are arranged in a conventional SOIC-8 footprint. Because the outputs are open collector rather than push-pull, circuit design must include suitable pull-up components and account for output rise time, load capacitance, and bus capacitance.
Typical uses include industrial control and automation, sensor threshold conditioning, battery and power-system monitoring, industrial control and automation, and embedded control systems. In each case, the comparator converts an analog voltage relationship into a logic signal that can drive an input, control an interrupt, or indicate a system state.
Layout should keep input traces short and route output traces away from sensitive analog nodes. Place pull-up resistors near the driven logic input when long traces or slow bus edges are possible. Verify the logic family, supply range, input common-mode limits, output sink capability, and propagation timing against the manufacturer datasheet before releasing the design.
This product page combines the LM393AWDT device description, pin assignment, package information, engineering application guidance, comparison parameters, and qualified drop-in alternatives. It is intended to help designers select the comparator quickly while completing the mandatory electrical and footprint checks for a production circuit.
直接替換替代品,適用於 LM393AWDT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM393AWDT (相同外形與佔位) — 差異在於 Package, Output Type, Operating Temperature Range, Number of Channels, Response Time.
LM393ADT
✅ 直接替換聯絡詢價
查看資料表 →LM393DT
✅ 直接替換✓ 有庫存
$0.0461 / 單位
查看資料表 →LM393BDR
✅ 直接替換📋 參考替代品(不在目錄中)
LM393AWDT 最大額定值與電氣特性
| Comparator Type | General-purpose voltage comparator |
| Number of Channels | 2 channels |
| 輸出類型 | Open-collector |
| Supply Architecture | Single supply |
| 封裝 | 8-pin SOIC |
| 安裝類型 | Surface mount |
LM393AWDT 腳位配置
| 腳位 1 | OUT1 — Comparator 1 open-collector output |
| 腳位 2 | IN1- — Comparator 1 inverting input |
| 腳位 3 | IN1+ — Comparator 1 non-inverting input |
| 腳位 4 | GND — Ground connection |
| 腳位 5 | IN2+ — Comparator 2 non-inverting input |
| 腳位 6 | IN2- — Comparator 2 inverting input |
| 腳位 7 | OUT2 — Comparator 2 open-collector output |
| 腳位 8 | VCC — Positive supply connection |
典型應用
LM393AWDT 適用於 6 應用s: Industrial Sensor Threshold Detection, Battery Voltage Monitoring, Power-Supply Sequencing Control, Embedded Control Logic, Window and Limit Monitoring, General-Purpose Logic Interface.
Industrial Sensor Threshold Detection
The LM393AWDT is well suited to industrial sensor threshold detection because it provides two independent comparator channels in one 8-pin SOIC. One channel can compare a conditioned sensor voltage with an upper threshold, while the second handles a lower threshold or another control signal. Its open-collector outputs can pull alarm or controller inputs low, with external pull-up resistors establishing the active-high digital state. This arrangement reduces component count while preserving independent channels. The design must keep sensor traces short, provide a stable reference for threshold generation, and confirm that the signal and supply voltages remain inside the comparator’s documented input common-mode and supply ranges.
推薦
Battery Voltage Monitoring
The LM393AWDT can implement battery or supply-rail monitoring using its two independent voltage-comparison channels. One channel may detect an undervoltage condition while the other identifies an overvoltage condition, producing separate open-collector flags for an embedded controller. The 8-pin SOIC package reduces board area, and the open-collector interface allows each flag to share a suitably rated pull-up arrangement. Because comparator accuracy depends on the reference and divider tolerances, the design should account for resistor tolerance, input offset, noise, and propagation delay. Supply current and operating-range limits must also be checked against the target battery platform before production release.
推薦
Power-Supply Sequencing Control
The LM393AWDT is applicable to basic power-supply sequencing because two independent comparator channels can evaluate different rail thresholds. One open-collector output can indicate that a rail has crossed an upper boundary, while the other can monitor a lower rail or a delayed enable signal. External pull-up resistors define the logic-high state, making the outputs usable with controller inputs and discrete control stages. The implementation should include hysteresis or filtering where threshold chatter would be harmful, and it must respect each comparator channel’s propagation delay. The device does not directly regulate a supply, so its role is decision and control rather than power conversion.
推薦
Embedded Control Logic
The LM393AWDT can convert analog conditions into logic decisions in an embedded control system. Two independent channels can handle separate control events, such as a temperature threshold and a pressure or position limit, with each open-collector output connected to a controller input through an appropriate pull-up. Combining both channels in one 8-pin SOIC simplifies routing compared with two separate single-channel comparators. For reliable operation, route the reference and sensor paths away from switching nodes, use a defined ground return, and check the input common-mode range at every temperature. Firmware should also allow for the propagation delay and any threshold hysteresis introduced by the external network.
推薦
Window and Limit Monitoring
The two-channel architecture of the LM393AWDT naturally supports upper- and lower-limit monitoring in feedback-control and protection systems. Each open-collector output can represent a separate out-of-range condition, allowing a controller to distinguish high-limit, low-limit, and in-range states. The 8-pin SOIC package makes the LM393AWDT suitable for compact analog supervision sections, while the open-collector outputs provide flexible interface options with pull-up resistors. Reference accuracy, input offset, and resistor tolerance determine the effective threshold limits, so these errors should be included in the safety margin. Temperature and propagation-delay effects must also be evaluated for dynamic control loops.
推薦
General-Purpose Logic Interface
The LM393AWDT is useful as a general-purpose logic interface when an analog voltage must be converted into a digital state for another logic block. Its two open-collector outputs can drive controller inputs, fault inputs, or discrete gate-control circuits, provided the required pull-up voltage and sink current are compatible. The 8-pin SOIC footprint supports compact placement near the sensed signal, reducing sensitivity to noise and delay. Designers should place pull-up resistors near the receiving input, avoid excessive capacitive loading on the output node, and use filtering if the compared signal crosses its threshold slowly. The manufacturer datasheet should be consulted for input offset, response time, and output-current limits.
推薦
推薦產品摘要
工程參考資料,適用於 LM393AWDT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM393ADT | LM393DT | LM393BDR | LM393LVDR | LM393DR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 |
| Comparator Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
| Special Features | Two independent low-power comparator channels | Two independent comparator channels | Two independent comparator channels | LM393 family comparator | Lower-voltage-range comparator alternative | LM393 family comparator |
主要差異化特點
- Two independent channels in one 8-pin SOIC (對比LM393BDR)
- Direct same-family ordering path (對比LM393ADT)
- Selection distinction for lower-voltage systems (對比LM393LVDR)
設計說明
Place the LM393AWDT close to the signals being compared and route pins 2, 3, 5, and 6 away from switching nodes and high-current return paths. A continuous ground plane under the device and a low-impedance connection from pin 4 to the circuit ground reference reduce pickup and common-mode errors. Keep the input traces short because added capacitance, coupled noise, and trace resistance can shift the effective threshold and slow the comparator response.
Use external pull-up resistors for pins 1 and 7 because the LM393AWDT has open-collector outputs. Place each resistor near the corresponding receiver input when the output also drives a bus. Select the resistance using the required sink current, bus capacitance, and desired rising-edge rate. Avoid excessively large pull-up values, which can create slow edges and additional switching noise that may disturb adjacent digital or analog circuitry.
Do not assume that equal pin numbers or equal package dimensions guarantee that another LM393-family device is interchangeable. Confirm pin 1 orientation, the functions of pins 1 through 8, supply limits, input common-mode range, propagation delay, and output sink capability. Also confirm whether the output is open collector or push-pull, since the latter requires a different external interface and pull-up strategy.
合規資訊
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact LM393AWDT ordering code. Confirm the current material declarations with STMicroelectronics before using the part in a regulated production design.