Texas Instruments

MAX3221ECPWE4 - 250kbps RS-232 Transceiver | Texas Instruments

MPN: MAX3221ECPWE4 ✓ Aktif
3V to 5.5V Vdss 1µA AutoShutdown supply current Id 16-pin TSSOP Package
MOQ: 1 |

MAX3221ECPWE4 Genel Bakış

Texas Instruments MAX3221ECPWE4 is a single-channel RS-232 line driver/receiver with a 250kbps maximum data rate, a 3V to 5.5V supply range, and ±15kV IEC ESD protection. The device is packaged in a 16-pin TSSOP and provides one driver and one receiver for serial-port interfaces. Its dual charge-pump design supports RS-232 signal generation from a single low-voltage supply.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 levels and converts received RS-232 levels back into CMOS-compatible logic. In the electronic hierarchy, a transceiver belongs to the interface IC and line-driver/receiver family, where it connects modern digital systems to the voltage, polarity, and noise-immunity characteristics of the RS-232 standard. The MAX3221ECPWE4 is intended for equipment that needs one bidirectional serial channel rather than the multiple channels available from larger transceivers.

Key features include a 3V to 5.5V operating range, operation up to 250kbps, and ±15kV IEC ESD protection. The low-voltage supply capability allows the device to operate directly from 3.3V or 5V system rails. A single channel reduces package size and power requirements when a design does not require multiple RS-232 ports. The integrated driver, receiver, and charge-pump circuitry also simplifies the external interface arrangement.

The MAX3221ECPWE4 combines one RS-232 driver and one receiver in a 16-terminal TSSOP package. Its receiver converts the incoming differential voltage on the RS-232 line into a CMOS-compatible output, while the driver converts a CMOS-compatible input into the electrical levels required by RS-232. The dual charge-pump circuit generates the positive and negative voltage levels used by the driver. According to the Texas Instruments MAX3221 datasheet, the device supports data rates up to 250kbps.

Typical applications include industrial serial interfaces, point-of-sale equipment, instrumentation, data acquisition systems, and embedded systems that require a single RS-232 port. The device is particularly suitable for compact controller boards operating from 3.3V or 5V rails. Because only one channel is included, systems needing several simultaneous RS-232 ports should use a multichannel transceiver instead.

When laying out a design, route the driver output and receiver input to their protected connector-side networks and keep sensitive logic traces away from the exposed RS-232 interface. Use the external components and connector arrangement shown in the manufacturer datasheet for charge-pump capacitors and interface protection. Confirm signal levels, grounding, cable length, and ESD requirements at the connector boundary.

This product record combines the exact ordering information, package details, electrical highlights, verified alternatives, and application guidance needed to evaluate the MAX3221ECPWE4. The comparison section distinguishes same-family and cross-brand drop-in options, while the design notes focus on signal routing, protection, and practical implementation decisions.

Drop-in alternatifler için MAX3221ECPWE4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX3221ECPWE4 (aynı form faktörü ve ayağa oturma) — farklı olan ESD Protection, Maximum Data Rate, Number of Drivers, Number of Receivers, Supply Voltage Range.

Analog Devices
ESD Protection: Enhanced ESD protection on RS-232 pins
Maximum Data Rate: 235 kbps
Number of Drivers: 1
İle Karşılaştır MAX3221ECPWE4 →

TRS3221ECPWR

✅ Yerleştirme
📦 16-pin TSSOP
Same 1-driver, 1-receiver, 250kbps, and 3V-to-5.5V interface; published comparison identifies complete terminal and package replacement with 0% rate or supply-range difference.

📋 Katalogda Olmayan Referans Alternatifi

MAX3221CPWE4

✅ Yerleştirme
Texas Instruments
📦 16-pin TSSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 1 · 1 · ±15 kV · Dual charge pump · Dedicated enable function · 16-pin TSSOP

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3221CPWRG4

✅ Yerleştirme
Texas Instruments
📦 16-pin TSSOP
Single-channel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbit/s · 1 · 1 · 1/1 full-duplex transceiver · ±15 kV · TIA/EIA-232-F

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3221EUE+

✅ Yerleştirme
Analog Devices
📦 16-pin TSSOP
1/1 RS-232 transceiver · 1 · 1 · 3 V to 5.5 V · 235 kbps · 1 µA · AutoShutdown with automatic wake-up · Single-supply operation with charge-pump voltage generation

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

SN65C3221EPWR

✅ Yerleştirme
📦 16-pin TSSOP
Same 1-driver, 1-receiver, 250kbps, 3V-to-5.5V, and ±15kV IEC ESD feature set with pin-to-pin-compatible serial connections; 0% rate and ESD-protection difference.

📋 Katalogda Olmayan Referans Alternatifi

MAX3221ECPWE4 Özellikler

Product Type Single-channel RS-232 line driver/receiver
Number of Drivers 1 driver
Number of Receivers 1 receiver
Maximum Data Rate 250kbps
Supply Voltage Range 3V to 5.5V
ESD Protection ±15kV IEC ESD protection
Paket 16-pin TSSOP
Terminal Count 16 terminals
Montaj Türü Surface mount
Temperature Grade Commercial
Besleme Akımı 1µA AutoShutdown supply current
Power-Saving Feature AutoShutdown
Charge-Pump Circuit Dual charge-pump circuit
Driver Input Logic Level 0.8V driver and control low-level input voltage
Green Product Status Green product with no Sb or Br
RoHS Compliance Compliant

MAX3221ECPWE4 16-pin tssop Pin Yapısı Kılavuzu

MAX3221ECPWE4 (16-pin tssop paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-pin tssop paket pin çizelgesi için MAX3221ECPWE4

Ayrıntılı pin çıkış verisi mevcut değil: MAX3221ECPWE4.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX3221ECPWE4 için uygundur 6 uygulamas: Industrial Serial Control Interfaces, Point-of-Sale and Retail Equipment, Data Acquisition and Instrumentation, Embedded Service and Maintenance Ports, Security and Access-Control Systems, Communication and Networking Equipment.

🏭

Industrial Serial Control Interfaces

The MAX3221ECPWE4 fits industrial controllers that require one RS-232 connection for configuration, testing, or legacy equipment. Its 3V-to-5.5V supply range supports both 3.3V and 5V controller rails, while the 250kbps rate covers conventional serial protocols used by data loggers and service interfaces. The single-driver, single-receiver arrangement minimizes board area compared with a multichannel transceiver. Use the manufacturer's recommended charge-pump capacitors and interface network, and route the RS-232 side toward the connector while separating it from sensitive analog or clock circuitry. The ±15kV IEC ESD protection improves interface resilience, although the completed product still requires appropriate grounding and cable practices.

🔧

Point-of-Sale and Retail Equipment

The MAX3221ECPWE4 is appropriate for point-of-sale terminals, receipt-printer interfaces, and compact retail peripherals that use a single RS-232 port. Its 16-pin TSSOP package and single-channel architecture conserve PCB area, while operation from 3.3V or 5V supports common embedded-controller platforms. A maximum data rate of 250kbps is sufficient for many peripheral protocols, and AutoShutdown can reduce current demand during inactive periods. Place the transceiver near the external connector, provide a stable common ground, and keep the charge-pump and driver traces away from display, keypad, and communication circuitry. Validate the logic thresholds and connector-side network for the specific peripheral before releasing production hardware.

📡

Data Acquisition and Instrumentation

The MAX3221ECPWE4 can provide a single RS-232 command channel for laboratory instruments, data loggers, and measurement equipment. Its 250kbps maximum data rate supports common serial-control and configuration traffic, while ±15kV IEC ESD protection is useful where an instrument may be connected to an external cable. The 3V-to-5.5V supply range allows use with either 3.3V or 5V signal-processing systems. Because this is a single-channel device, choose it when one control port is sufficient; use a multichannel transceiver when several instruments must be connected simultaneously. Follow the datasheet interface topology and verify ground behavior, cable length, and grounding strategy with the complete measurement system.

🖥️

Embedded Service and Maintenance Ports

The MAX3221ECPWE4 is well suited to embedded equipment that exposes a maintenance or service port through RS-232. The 16-pin TSSOP package fits compact controller boards, and the 3V-to-5.5V supply range supports embedded processors operating at 3.3V or 5V. A 250kbps link provides adequate speed for configuration logs, diagnostic commands, and firmware-related service traffic. AutoShutdown helps reduce power use when the service port is not active, making the device suitable for intermittently connected interfaces. Keep the connector entry point isolated from sensitive internal nets, use a low-impedance ground strategy, and verify the receiver threshold against the logic system. Confirm all 16 terminal assignments before considering a same-package substitute.

🛡️

Security and Access-Control Systems

The MAX3221ECPWE4 can serve as a wired RS-232 interface in access-control readers, door controllers, and alarm panels that need a single commissioning or diagnostic connection. Its 3V-to-5.5V operating range supports low-voltage embedded control platforms, and the 250kbps data rate is adequate for configuration and status traffic. The stated ±15kV IEC ESD protection adds valuable robustness when the port connects to an external cable. The single-channel configuration reduces board area in compact enclosures. In a finished security product, maintain a continuous signal ground, place the protection network at the connector boundary, and separate the RS-232 route from sensitive sensor wiring. Confirm the final cable and grounding strategy as part of system-level ESD validation.

🌐

Communication and Networking Equipment

The MAX3221ECPWE4 is useful in communication equipment that retains a single RS-232 management, diagnostic, or legacy interface. A 250kbps maximum rate is appropriate for configuration consoles and status links, while the 3V-to-5.5V supply range enables integration with modern 3.3V and 5V hardware. The 16-pin TSSOP package allows a compact implementation without adding the area of a multichannel transceiver. For exposed network equipment, place the transceiver near the serial connector, route the driver and receiver paths as a protected interface, and avoid crossing them with sensitive high-speed traces. Use the Texas Instruments application circuit and verify signal levels, common-mode voltage, grounding, and cable length before production release.

Önerilen Ürünler Özeti

MAX3221ECPWE4 Texas Instruments Kullanıldığı Yer: Industrial Serial Control Interfaces, Point-of-Sale and Retail Equipment, Data Acquisition and Instrumentation, Embedded Service and Maintenance Ports, Security and Access-Control Systems, Communication and Networking Equipment SN65C3221EPWR Pin-compatible single-channel alternative Kullanıldığı Yer: Industrial Serial Control Interfaces, Data Acquisition and Instrumentation, Communication and Networking Equipment TRS3221ECPWR Same-package drop-in interface Kullanıldığı Yer: Point-of-Sale and Retail Equipment, Security and Access-Control Systems MAX3221EUE+ Analog Devices Kullanıldığı Yer: Embedded Service and Maintenance Ports
What are the key specifications of MAX3221ECPWE4?
The MAX3221ECPWE4 provides one RS-232 driver, one receiver, and a maximum data rate of 250kbps in a 16-pin TSSOP package. According to the Texas Instruments MAX3221 datasheet, its supply range is 3V to 5.5V and its interface includes ±15kV IEC ESD protection. The device also uses AutoShutdown to reduce supply current and a dual charge-pump circuit for single-supply RS-232 operation.
What is the operating voltage of MAX3221ECPWE4?
The MAX3221ECPWE4 operates from a 3V to 5.5V supply. According to the Texas Instruments MAX3221 datasheet, this range allows the transceiver to be powered by common 3.3V or 5V system rails. The supply must remain within the stated limits, while the protected RS-232 line interfaces handle the higher voltage levels present on the connector side.
How fast is MAX3221ECPWE4?
The MAX3221ECPWE4 supports RS-232 data rates up to 250kbps. Texas Instruments identifies the device as a 3V to 5.5V, single-channel RS-232 line driver/receiver rated for 250kbps operation. This rate is suitable for conventional serial links that do not require the higher throughput associated with newer RS-232 transceiver families.
Where can I download the MAX3221ECPWE4 datasheet PDF?
The official MAX3221ECPWE4 technical information is available through the Texas Instruments MAX3221 product page at https://www.ti.com/product/MAX3221. The manufacturer datasheet contains the pin configuration, operating limits, electrical characteristics, charge-pump application circuit, and recommended interface network. Use the ordering information on that page to confirm that the MAX3221ECPWE4 suffix matches the required 16-pin TSSOP configuration.
Where can I find the MAX3221ECPWE4 pinout?
The MAX3221ECPWE4 pinout is documented in the pin-configuration section of the Texas Instruments MAX3221 datasheet. The device has 16 terminals in a TSSOP package, and its pin functions cover the driver, receiver, charge-pump capacitors, power rails, and enable-related controls. Assign PCB tracks by following the numbered package drawing and pin-description table in the manufacturer document.
Does MAX3221ECPWE4 provide ESD protection?
The MAX3221ECPWE4 includes ±15kV IEC ESD protection on its RS-232 interface. Texas Instruments states this protection rating in the MAX3221 product description. It strengthens the transceiver against electrostatic discharge at the user-facing line interface, although cable routing, grounding, connector construction, and external protection still determine the protection achieved by the complete equipment.
What can replace MAX3221ECPWE4?
The TRS3221ECPWR can replace the MAX3221ECPWE4 as a pin-compatible, same-package option according to the published cross-reference comparison. The listed alternatives retain a 250kbps, 3V-to-5.5V RS-232 interface in a 16-pin TSSOP configuration. Confirm enable behavior, charge-pump capacitor values, and every pin connection against the manufacturer datasheet before approving a replacement.
Is MAX3221ECPWE4 the same as TRS3221ECPWR?
The TRS3221ECPWR is identified as a complete, pin-compatible replacement for the MAX3221ECPWE4 in a published comparison. Both are single-driver, single-receiver RS-232 transceivers supporting 250kbps operation from 3V to 5.5V in 16-pin TSSOP packages. Despite the interchangeability, review the device-specific logic thresholds and enable functions before using either part in a new design.
What is the best Texas Instruments equivalent for MAX3221ECPWE4?
The TRS3221ECPWR is the closest listed Texas Instruments drop-in candidate because the comparison describes it as a complete replacement with consistent terminals, packages, and principal performance characteristics. It retains one driver, one receiver, a 250kbps rate, and a 3V-to-5.5V supply range. Validate the exact pin functions and external charge-pump capacitor values during component substitution.
What is the best Texas Instruments RS-232 equivalent for MAX3221ECPWE4?
The SN65C3221EPWR is a published cross-brand alternative with one line driver, one receiver, a dual charge-pump circuit, ±15kV IEC ESD protection, and pin-to-pin-compatible serial-port connections. It uses a 16-pin TSSOP package and serves as a close functional replacement for a single-channel 250kbps RS-232 interface. Verify logic thresholds and control-pin behavior before production use.
When should I choose MAX3221ECPWE4 over another RS-232 transceiver?
Choose the MAX3221ECPWE4 when the design requires one RS-232 channel, a 3V-to-5.5V supply, a data rate up to 250kbps, and ±15kV IEC ESD protection in a 16-pin TSSOP package. It is also appropriate when AutoShutdown is valuable for reducing supply current in intermittently connected equipment. Select a multichannel device instead when the system needs more than one port.
Is MAX3221ECPWE4 suitable for a 3.3V embedded system?
The MAX3221ECPWE4 is suitable for a 3.3V embedded system because its specified supply range includes 3V to 5.5V. The single RS-232 channel, AutoShutdown function, and 250kbps maximum data rate fit compact controllers, instrumentation, and service equipment. Ensure the connected logic levels meet the receiver and driver thresholds documented by Texas Instruments.
Where can I buy MAX3221ECPWE4 online?
Use the Request a Quote form on this page to ask for MAX3221ECPWE4 availability, current lead time, and order handling for the exact Texas Instruments ordering code. The manufacturer and distributor listings identified for this part cover the MAX3221ECPWE4 16-pin TSSOP device. Share the required quantity and packaging preference with the supplier so the quotation matches the intended production configuration.
What is the price of MAX3221ECPWE4?
Submit a quotation request through the Request a Quote form on this page for the current MAX3221ECPWE4 price, quantity breaks, stock position, and lead time. Pricing can change with supplier inventory, order quantity, and market conditions. Include the exact MAX3221ECPWE4 ordering suffix and the required shipment quantity to receive a current commercial response.
What is the lead time for MAX3221ECPWE4?
Request the current lead time through the Request a Quote form on this page. Lead time depends on supplier stock, the requested quantity, and the exact MAX3221ECPWE4 packing configuration. For new production releases, allow time for schedule review, incoming inspection, and any quality or traceability documentation requested with the shipment.
Is MAX3221ECPWE4 in stock?
The current stock position for MAX3221ECPWE4 should be confirmed through the Request a Quote form on this page. Availability can vary by manufacturer inventory and distributor allocation, particularly for exact suffix and packing-code requirements. Provide the required quantity, delivery date, and shipment destination so the response reflects the configuration needed for your build.
How should MAX3221ECPWE4 be protected at an RS-232 connector?
Keep the MAX3221ECPWE4 interface circuit close to the RS-232 connector and route protected driver and receiver nets away from sensitive logic. The device provides ±15kV IEC ESD protection, but correct grounding, cable design, connector selection, and the manufacturer-recommended external network remain essential. Follow the Texas Instruments datasheet layout because charge-pump and interface traces can carry disruptive transient currents.

Mühendislik referans verileri: MAX3221ECPWE4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX3221ECPWE4 when the design needs one RS-232 channel, a 3.3V or 5V supply, operation up to 250kbps, and ±15kV IEC ESD protection in a 16-pin TSSOP package. Choose the TRS3221ECPWR when you want a published same-footprint Texas Instruments replacement with matching headline specifications. Choose the SN65C3221EPWR when its pin-compatible serial connections and equivalent single-channel performance match the required interface. The MAX3221CPWE4 and MAX3221CPWRG4 are suitable same-family alternatives only after checking the protection designation and control behavior. None of these single-channel options reduces the need to verify the complete pin map, external charge-pump capacitors, shutdown logic, and connector network. For systems requiring multiple RS-232 ports, select a multichannel transceiver instead of adding several separate devices.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün TRS3221ECPWR MAX3221CPWE4 MAX3221CPWRG4 MAX3221EUE+ SN65C3221EPWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Maxim Integrated Texas Instruments
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Device Type Single-channel RS-232 line driver/receiver Single-channel RS-232 transceiver Single-channel MAX3221-family transceiver Single-channel MAX3221-family transceiver Single-channel MAX3221-family transceiver Single-channel RS-232 transceiver
Number of Drivers 1 driver 1 driver 1 driver 1 driver 1 driver 1 driver
Number of Receivers 1 receiver 1 receiver 1 receiver 1 receiver 1 receiver 1 receiver
Supply Voltage Range 3V to 5.5V 3V to 5.5V 3V to 5.5V 3V to 5.5V 3V to 5.5V 3V to 5.5V

Ana Farklılayıcılar

  • Direct Texas Instruments pin-compatible replacement (karşılaştırma:TRS3221ECPWR)
  • Single-channel solution with integrated charge pump (karşılaştırma:MAX3232CUE+T)
  • Cross-reference match with the same principal protection rating (karşılaştırma:SN65C3221EPWR)

Tasarım Notları

Place the MAX3221ECPWE4 close to the RS-232 connector and route the driver and receiver nets directly toward the protected interface network. Keep charge-pump capacitor connections short and symmetrical, and avoid placing sensitive logic traces beneath or beside the interface section. This arrangement reduces transient-current paths through the logic ground and improves the effectiveness of the device's ±15kV IEC ESD protection.

Do not assume that identical TSSOP-16 packages guarantee interchangeable operation. Before substituting TRS3221ECPWR, MAX3221CPWE4, MAX3221CPWRG4, MAX3221EUE+, or SN65C3221EPWR, compare every pin name, enable threshold, receiver output state, charge-pump capacitor connection, and external-interface component value against the manufacturer datasheets. Pay particular attention to shutdown behavior and logic levels.

Decouple the MAX3221ECPWE4 supply pins with the capacitance and placement specified in the Texas Instruments application circuit. The 3V-to-5.5V supply range supports both 3.3V and 5V systems, but the charge-pump circuit requires clean local power to maintain stable driver output. Use a low-impedance ground connection and avoid sharing narrow return paths with switching regulators or motors.

Treat the RS-232 side as a high-voltage, surge-sensitive interface even though the logic side operates from 3.3V or 5V. Keep the connector return path continuous, terminate or bias unused receiver inputs according to the datasheet, and verify the external series and protection components. The 250kbps maximum rate does not remove the need for controlled impedance and a low-noise reference ground.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The MAX3221 family is identified as a green product with no antimony or bromine. RoHS compliance is confirmed, while REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require manufacturer confirmation for the exact ordering code.

İlgili Aramalar

MAX3221ECPWE4 datasheet MAX3221ECPWE4 pinout MAX3221ECPWE4 datasheet pdf MAX3221ECPWE4 equivalent MAX3221ECPWE4 replacement MAX3221ECPWE4 vs TRS3221ECPWR MAX3221ECPWE4 vs SN65C3221EPWR Texas Instruments MAX3221ECPWE4 MAX3221ECPWE4 250kbps RS-232 MAX3221ECPWE4 16-TSSOP MAX3221ECPWE4 RS-232 interface MAX3221ECPWE4 price MAX3221ECPWE4 stock MAX3221ECPWE4 cross reference

İlgili Bileşenler ve Terimler

Texas Instruments MAX3221ECPWE4 TRS3221ECPWR SN65C3221EPWR MAX3221CPWE4 MAX3221CPWRG4 MAX3221EUE+ RS-232 RS-232 transceiver line driver line receiver interface IC CMOS AutoShutdown dual charge-pump circuit 250kbps 3V to 5.5V ±15kV IEC ESD protection TSSOP-16 surface mount industrial control point-of-sale equipment data acquisition RoHS green product
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle