MAX3221ECPWE4 - 250kbps RS-232 Transceiver | Texas Instruments
MPN: MAX3221ECPWE4 ✓ 啟用中MAX3221ECPWE4 概覽
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 levels and converts received RS-232 levels back into CMOS-compatible logic. In the electronic hierarchy, a transceiver belongs to the interface IC and line-driver/receiver family, where it connects modern digital systems to the voltage, polarity, and noise-immunity characteristics of the RS-232 standard. The MAX3221ECPWE4 is intended for equipment that needs one bidirectional serial channel rather than the multiple channels available from larger transceivers.
Key features include a 3V to 5.5V operating range, operation up to 250kbps, and ±15kV IEC ESD protection. The low-voltage supply capability allows the device to operate directly from 3.3V or 5V system rails. A single channel reduces package size and power requirements when a design does not require multiple RS-232 ports. The integrated driver, receiver, and charge-pump circuitry also simplifies the external interface arrangement.
The MAX3221ECPWE4 combines one RS-232 driver and one receiver in a 16-terminal TSSOP package. Its receiver converts the incoming differential voltage on the RS-232 line into a CMOS-compatible output, while the driver converts a CMOS-compatible input into the electrical levels required by RS-232. The dual charge-pump circuit generates the positive and negative voltage levels used by the driver. According to the Texas Instruments MAX3221 datasheet, the device supports data rates up to 250kbps.
Typical applications include industrial serial interfaces, point-of-sale equipment, instrumentation, data acquisition systems, and embedded systems that require a single RS-232 port. The device is particularly suitable for compact controller boards operating from 3.3V or 5V rails. Because only one channel is included, systems needing several simultaneous RS-232 ports should use a multichannel transceiver instead.
When laying out a design, route the driver output and receiver input to their protected connector-side networks and keep sensitive logic traces away from the exposed RS-232 interface. Use the external components and connector arrangement shown in the manufacturer datasheet for charge-pump capacitors and interface protection. Confirm signal levels, grounding, cable length, and ESD requirements at the connector boundary.
This product record combines the exact ordering information, package details, electrical highlights, verified alternatives, and application guidance needed to evaluate the MAX3221ECPWE4. The comparison section distinguishes same-family and cross-brand drop-in options, while the design notes focus on signal routing, protection, and practical implementation decisions.
直接替換替代品,適用於 MAX3221ECPWE4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3221ECPWE4 (相同外形與佔位) — 差異在於 ESD Protection, Maximum Data Rate, Number of Drivers, Number of Receivers, Supply Voltage Range.
TRS3221ECPWR
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3221CPWE4
✅ 直接替換聯絡詢價
查看資料表 →MAX3221CPWRG4
✅ 直接替換聯絡詢價
查看資料表 →MAX3221EUE+
✅ 直接替換聯絡詢價
查看資料表 →SN65C3221EPWR
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3221ECPWE4 規格
| Product Type | Single-channel RS-232 line driver/receiver |
| Number of Drivers | 1 driver |
| Number of Receivers | 1 receiver |
| Maximum Data Rate | 250kbps |
| Supply Voltage Range | 3V to 5.5V |
| ESD Protection | ±15kV IEC ESD protection |
| 封裝 | 16-pin TSSOP |
| Terminal Count | 16 terminals |
| 安裝類型 | Surface mount |
| Temperature Grade | Commercial |
| 供應電流 | 1µA AutoShutdown supply current |
| Power-Saving Feature | AutoShutdown |
| Charge-Pump Circuit | Dual charge-pump circuit |
| Driver Input Logic Level | 0.8V driver and control low-level input voltage |
| Green Product Status | Green product with no Sb or Br |
| RoHS Compliance | Compliant |
MAX3221ECPWE4 16-pin tssop 腳位配置指南
MAX3221ECPWE4(16-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3221ECPWE4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3221ECPWE4 適用於 6 應用s: Industrial Serial Control Interfaces, Point-of-Sale and Retail Equipment, Data Acquisition and Instrumentation, Embedded Service and Maintenance Ports, Security and Access-Control Systems, Communication and Networking Equipment.
Industrial Serial Control Interfaces
The MAX3221ECPWE4 fits industrial controllers that require one RS-232 connection for configuration, testing, or legacy equipment. Its 3V-to-5.5V supply range supports both 3.3V and 5V controller rails, while the 250kbps rate covers conventional serial protocols used by data loggers and service interfaces. The single-driver, single-receiver arrangement minimizes board area compared with a multichannel transceiver. Use the manufacturer's recommended charge-pump capacitors and interface network, and route the RS-232 side toward the connector while separating it from sensitive analog or clock circuitry. The ±15kV IEC ESD protection improves interface resilience, although the completed product still requires appropriate grounding and cable practices.
推薦
Point-of-Sale and Retail Equipment
The MAX3221ECPWE4 is appropriate for point-of-sale terminals, receipt-printer interfaces, and compact retail peripherals that use a single RS-232 port. Its 16-pin TSSOP package and single-channel architecture conserve PCB area, while operation from 3.3V or 5V supports common embedded-controller platforms. A maximum data rate of 250kbps is sufficient for many peripheral protocols, and AutoShutdown can reduce current demand during inactive periods. Place the transceiver near the external connector, provide a stable common ground, and keep the charge-pump and driver traces away from display, keypad, and communication circuitry. Validate the logic thresholds and connector-side network for the specific peripheral before releasing production hardware.
推薦
Data Acquisition and Instrumentation
The MAX3221ECPWE4 can provide a single RS-232 command channel for laboratory instruments, data loggers, and measurement equipment. Its 250kbps maximum data rate supports common serial-control and configuration traffic, while ±15kV IEC ESD protection is useful where an instrument may be connected to an external cable. The 3V-to-5.5V supply range allows use with either 3.3V or 5V signal-processing systems. Because this is a single-channel device, choose it when one control port is sufficient; use a multichannel transceiver when several instruments must be connected simultaneously. Follow the datasheet interface topology and verify ground behavior, cable length, and grounding strategy with the complete measurement system.
推薦
Embedded Service and Maintenance Ports
The MAX3221ECPWE4 is well suited to embedded equipment that exposes a maintenance or service port through RS-232. The 16-pin TSSOP package fits compact controller boards, and the 3V-to-5.5V supply range supports embedded processors operating at 3.3V or 5V. A 250kbps link provides adequate speed for configuration logs, diagnostic commands, and firmware-related service traffic. AutoShutdown helps reduce power use when the service port is not active, making the device suitable for intermittently connected interfaces. Keep the connector entry point isolated from sensitive internal nets, use a low-impedance ground strategy, and verify the receiver threshold against the logic system. Confirm all 16 terminal assignments before considering a same-package substitute.
推薦
Security and Access-Control Systems
The MAX3221ECPWE4 can serve as a wired RS-232 interface in access-control readers, door controllers, and alarm panels that need a single commissioning or diagnostic connection. Its 3V-to-5.5V operating range supports low-voltage embedded control platforms, and the 250kbps data rate is adequate for configuration and status traffic. The stated ±15kV IEC ESD protection adds valuable robustness when the port connects to an external cable. The single-channel configuration reduces board area in compact enclosures. In a finished security product, maintain a continuous signal ground, place the protection network at the connector boundary, and separate the RS-232 route from sensitive sensor wiring. Confirm the final cable and grounding strategy as part of system-level ESD validation.
推薦
Communication and Networking Equipment
The MAX3221ECPWE4 is useful in communication equipment that retains a single RS-232 management, diagnostic, or legacy interface. A 250kbps maximum rate is appropriate for configuration consoles and status links, while the 3V-to-5.5V supply range enables integration with modern 3.3V and 5V hardware. The 16-pin TSSOP package allows a compact implementation without adding the area of a multichannel transceiver. For exposed network equipment, place the transceiver near the serial connector, route the driver and receiver paths as a protected interface, and avoid crossing them with sensitive high-speed traces. Use the Texas Instruments application circuit and verify signal levels, common-mode voltage, grounding, and cable length before production release.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3221ECPWE4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TRS3221ECPWR | MAX3221CPWE4 | MAX3221CPWRG4 | MAX3221EUE+ | SN65C3221EPWR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Maxim Integrated | Texas Instruments |
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Device Type | Single-channel RS-232 line driver/receiver | Single-channel RS-232 transceiver | Single-channel MAX3221-family transceiver | Single-channel MAX3221-family transceiver | Single-channel MAX3221-family transceiver | Single-channel RS-232 transceiver |
| Number of Drivers | 1 driver | 1 driver | 1 driver | 1 driver | 1 driver | 1 driver |
| Number of Receivers | 1 receiver | 1 receiver | 1 receiver | 1 receiver | 1 receiver | 1 receiver |
| Supply Voltage Range | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V |
主要差異化特點
- Direct Texas Instruments pin-compatible replacement (對比TRS3221ECPWR)
- Single-channel solution with integrated charge pump (對比MAX3232CUE+T)
- Cross-reference match with the same principal protection rating (對比SN65C3221EPWR)
設計說明
Place the MAX3221ECPWE4 close to the RS-232 connector and route the driver and receiver nets directly toward the protected interface network. Keep charge-pump capacitor connections short and symmetrical, and avoid placing sensitive logic traces beneath or beside the interface section. This arrangement reduces transient-current paths through the logic ground and improves the effectiveness of the device's ±15kV IEC ESD protection.
Do not assume that identical TSSOP-16 packages guarantee interchangeable operation. Before substituting TRS3221ECPWR, MAX3221CPWE4, MAX3221CPWRG4, MAX3221EUE+, or SN65C3221EPWR, compare every pin name, enable threshold, receiver output state, charge-pump capacitor connection, and external-interface component value against the manufacturer datasheets. Pay particular attention to shutdown behavior and logic levels.
Decouple the MAX3221ECPWE4 supply pins with the capacitance and placement specified in the Texas Instruments application circuit. The 3V-to-5.5V supply range supports both 3.3V and 5V systems, but the charge-pump circuit requires clean local power to maintain stable driver output. Use a low-impedance ground connection and avoid sharing narrow return paths with switching regulators or motors.
Treat the RS-232 side as a high-voltage, surge-sensitive interface even though the logic side operates from 3.3V or 5V. Keep the connector return path continuous, terminate or bias unused receiver inputs according to the datasheet, and verify the external series and protection components. The 250kbps maximum rate does not remove the need for controlled impedance and a low-noise reference ground.
合規資訊
The MAX3221 family is identified as a green product with no antimony or bromine. RoHS compliance is confirmed, while REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require manufacturer confirmation for the exact ordering code.