6EDL04I065NRXUMA1 - 650V 3-Phase Gate Driver IC | Infineon
MPN: 6EDL04I065NRXUMA1 ✓ فعال6EDL04I065NRXUMA1 جائزہ
Key features include a maximum blocking voltage of +650 V, integrated Over Current Protection (OCP), an Enable (EN) input for hardware shutdown, a Fault output flag, and built-in bootstrap diodes (BSD) that eliminate external discrete diodes for the high-side supply. The device is built on Infineon's thin-film Silicon-on-Insulator (SOI) process, providing integrated level shifters with robust negative transient immunity on the high-side floating rails.
Typical applications include 3-phase motor drives for HVAC fans, pumps, and compressors, as well as low-power general-purpose inverters where a 650 V blocking rating and integrated bootstrap simplify the BOM. The OCP and Fault pin provide the hardware protection interface required for industrial drive safety architectures.
When designing with this part, choose the bootstrap capacitor value to maintain the high-side supply above the UVLO threshold during the minimum PWM on-time. Place the three bootstrap capacitors as close to the BSTx pins as possible to minimize parasitic inductance on the floating supply rails.
کے لیے ڈراپ اِن متبادل 6EDL04I065NRXUMA1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں 6EDL04I065NRXUMA1 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Mounting Type.
2EDL8033G4CXTMA1
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →IDL04G65C5XUMA2
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →6EDL04I065NRXUMA1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ٹوپولوجی | 3-phase gate driver (6 channels) |
| آؤٹ پٹ کنفیگریشن | Non-inverting half-bridge drivers |
| Maximum Blocking Voltage | 650 V |
| Number of Channels | 6 |
| Driver Type | IGBT / MOSFET gate driver |
| Technology | Infineon thin-film SOI |
| Integrated Bootstrap Diode (BSD) | Yes |
| Over Current Protection (OCP) | Yes |
| Enable Input (EN) | Yes |
| Fault Output | Yes |
| پیکیج | PG-TSSOP-25 |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Family | 6EDL04x065xR |
| RoHS اسٹیٹس | Compliant |
| Datasheet Document | Infineon 6EDL04 family datasheet (see datasheet_url) |
6EDL04I065NRXUMA1 پن کنفیگریشن
| پن 1 | VCC — Logic and low-side supply (typical 15 V) |
| پن 2 | HIN1 — High-side input phase U |
| پن 3 | HIN2 — High-side input phase V |
| پن 4 | HIN3 — High-side input phase W |
| پن 5 | LIN1 — Low-side input phase U |
| پن 6 | LIN2 — Low-side input phase V |
| پن 7 | LIN3 — Low-side input phase W |
| پن 8 | EN — Enable input (active high) |
| پن 9 | FAULT — Fault output (open-drain, active low) |
| پن 10 | ITRIP — Over-current protection input |
| پن 11 | GND — Logic ground |
| پن 12 | LO1 — Low-side gate drive phase U |
| پن 13 | LO2 — Low-side gate drive phase V |
| پن 14 | LO3 — Low-side gate drive phase W |
| پن 15 | VS1 — High-side floating supply return phase U |
| پن 16 | VB1 — Bootstrap supply phase U |
| پن 17 | HO1 — High-side gate drive phase U |
| پن 18 | VS2 — High-side floating supply return phase V |
| پن 19 | VB2 — Bootstrap supply phase V |
| پن 20 | HO2 — High-side gate drive phase V |
| پن 21 | VS3 — High-side floating supply return phase W |
| پن 22 | VB3 — Bootstrap supply phase W |
| پن 23 | HO3 — High-side gate drive phase W |
| پن 24 | NC — Not connected (per datasheet) |
| پن 25 | EP — Exposed thermal pad - connect to GND |
عام استعمالات
6EDL04I065NRXUMA1 کے لیے موزوں ہے 6 ایپلیکیشنs: HVAC Compressor Inverter Drive, 3-Phase BLDC Motor Drive, Industrial Pump and Fan Inverter, Solar Micro-Inverter Power Stage, Industrial Servo Drive Power Section, White Goods Motor Control (Washing Machines, Dishwashers).
HVAC Compressor Inverter Drive
The 6EDL04I065NRXUMA1 fits HVAC compressor inverters because its 650 V blocking rating covers the rectified 230/400 V AC bus with sufficient margin, while the three integrated bootstrap diodes eliminate six external discrete components. With 6 non-inverting channels, the IC drives the six IGBTs of a 3-phase inverter in a single package. The integrated OCP and Fault output satisfy the hardware protection requirements of compressor safety standards, and the PG-TSSOP-25 keeps the gate-drive section compact next to the power module.
تجویز کردہ
3-Phase BLDC Motor Drive
For 3-phase brushless DC motor drives the 6EDL04I065NRXUMA1 delivers one high-side and one low-side driver per phase, allowing a single IC to control the entire inverter bridge. The non-inverting input logic interfaces directly with MCU PWM outputs. Built-in OCP enables cycle-by-cycle current limiting when paired with a shunt amplifier, while the Fault output can disable the PWM inputs of the host MCU. Thin-film SOI technology provides robust negative transient immunity on the floating high-side rails.
تجویز کردہ
Industrial Pump and Fan Inverter
Industrial pumps and fans typically operate from 3-phase mains and need a robust, integrated gate driver with hardware protection. The 6EDL04I065NRXUMA1 matches this requirement with 650 V rating, integrated bootstrap, EN input for hardware shutdown, and Fault reporting for system-level diagnostics. Its SOI level-shift technology tolerates the fast dV/dt transitions of industrial IGBT bridges. The PG-TSSOP-25 footprint and 6-channel integration simplify the gate-drive PCB and reduce wiring complexity.
تجویز کردہ
Solar Micro-Inverter Power Stage
In a small solar micro-inverter, the 6EDL04I065NRXUMA1 drives the 3-phase output bridge tied to the low-voltage AC grid, while its 650 V blocking rating provides headroom for the rectified PV bus. Integrated bootstrap diodes cut BOM cost in the cost-sensitive micro-inverter market. The EN pin enables clean power-stage disable during fault or standby, reducing switching losses. Thin-film SOI process provides stable operation over the wide temperature range encountered in outdoor enclosures.
تجویز کردہ
Industrial Servo Drive Power Section
Servo drives require precise 3-phase current control with hardware OCP for safety. The 6EDL04I065NRXUMA1 provides three high-side/low-side channel pairs with matched propagation delay, which preserves PWM alignment for current-loop accuracy. The integrated OCP accepts a shunt-amplifier signal at the ITRIP pin and triggers the Fault output within microseconds. The 25-pin PG-TSSOP package exposes a thermal pad to manage dissipation in servo applications with high PWM frequency.
تجویز کردہ
White Goods Motor Control (Washing Machines, Dishwashers)
White-goods motor control boards benefit from the 6EDL04I065NRXUMA1's high integration: six channels, integrated bootstrap, OCP, Fault and EN in one TSSOP-25 IC. This reduces the BOM and PCB area needed for the inverter section of a washing machine or dishwasher main motor. The 650 V rating supports worldwide mains (110-240 V AC) without derating. Non-inverting inputs allow direct connection to a low-cost MCU PWM peripheral without glue logic.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا 6EDL04I065NRXUMA1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | 2EDL8033G4CXTMA1 | IDL04G65C5XUMA2 |
|---|---|---|---|
| Package | PG-TSSOP-25 | PG-TSSOP-25 - same | PG-TSSOP-25 - same |
| Brand | Infineon | Infineon | Infineon |
| Maximum Blocking Voltage | 650 V | 80-100 V (lower rating) | 650 V (same rating) |
| Number of Channels | 6 (3-phase) | 6 (3-phase) | 6 (3-phase) |
| Integrated Bootstrap Diode | Yes | Yes | Yes |
| Over Current Protection | Yes (ITRIP) | Yes | Yes |
| Enable / Fault Pins | Yes (EN + Fault) | Yes | Yes |
| Target Application Class | Industrial mains 230/400 VAC | Low-voltage DC bus | Industrial mains 230/400 VAC |
اہم امتیازی خصوصیات
- Single-IC 3-phase gate driver with integrated bootstrap (بمقابلہDiscrete 3x IR2110SPBF solution)
- Higher blocking voltage (بمقابلہ2EDL8033G4CXTMA1)
- Built-in OCP and Fault reporting (بمقابلہDiscrete 3x IR2110SPBF solution)
ڈیزائن نوٹس
Place each bootstrap capacitor as close as possible to its BSTx and VSx pins to minimize parasitic inductance on the high-side floating supply. The IC integrates bootstrap diodes, so only an external capacitor (typically 1 uF X7R) per phase is required. Keep the GND return path of the low-side drivers short and direct to the power-stage shunt resistor to avoid ground bounce during switching.
Do not exceed the 650 V maximum blocking voltage on the high-side rails. The OCP comparator trips on the ITRIP pin voltage threshold; ensure the shunt-amplifier output stays within the linear range of this pin to avoid false trips. If the application requires a negative IGBT turn-off, add a separate gate-emitter resistor and verify it does not exceed the gate-drive sink current rating.
Estimated: at 25 kHz switching frequency, 5 nC gate charge per IGBT, and VCC = 15 V, each of the six channels draws roughly P_gate = 5 nC * 15 V * 6 channels * 25 kHz = 11 mW of gate-drive loss. The PG-TSSOP-25 thermal pad must be soldered to a copper pour of at least 100 mm^2 to keep junction temperature rise below 30 C in typical industrial environments.
تعمیل کی معلومات
RoHS and lead-free status confirmed by Infineon product page and distributor listings. Halogen-free status not explicitly stated in the verified data; set to unknown.
