6EDL04I065NRXUMA1 - 650V 3-Phase Gate Driver IC | Infineon
MPN: 6EDL04I065NRXUMA1 β Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $5.85 | $5.85 |
| 10 | $5.32 | $53.20 |
| 100 | $4.78 | $478.00 |
| 500 | $4.31 | $2,155.00 |
| 1,000 | $3.92 | $3,920.00 |
6EDL04I065NRXUMA1 Overview
Key features include a maximum blocking voltage of +650 V, integrated Over Current Protection (OCP), an Enable (EN) input for hardware shutdown, a Fault output flag, and built-in bootstrap diodes (BSD) that eliminate external discrete diodes for the high-side supply. The device is built on Infineon's thin-film Silicon-on-Insulator (SOI) process, providing integrated level shifters with robust negative transient immunity on the high-side floating rails.
Typical applications include 3-phase motor drives for HVAC fans, pumps, and compressors, as well as low-power general-purpose inverters where a 650 V blocking rating and integrated bootstrap simplify the BOM. The OCP and Fault pin provide the hardware protection interface required for industrial drive safety architectures.
When designing with this part, choose the bootstrap capacitor value to maintain the high-side supply above the UVLO threshold during the minimum PWM on-time. Place the three bootstrap capacitors as close to the BSTx pins as possible to minimize parasitic inductance on the floating supply rails.
Drop-in alternatives for 6EDL04I065NRXUMA1 β same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with 6EDL04I065NRXUMA1 (same form factor and footprint) β differing in Package, Mounting Type.
Quick Comparison Tool β Select alternative parts for side-by-side comparison:
2EDL8033G4CXTMA1
β Drop-Inβ In Stock
$2.84 / Unit
View Datasheet βIDL04G65C5XUMA2
β Drop-In β οΈ εζ°εΎ ιͺθ―β In Stock
$0.92 / Unit
View Datasheet β6EDL04I065NRXUMA1 Maximum Ratings & Electrical Characteristics
| Topology | 3-phase gate driver (6 channels) |
| Output Configuration | Non-inverting half-bridge drivers |
| Maximum Blocking Voltage | 650 V |
| Number of Channels | 6 |
| Driver Type | IGBT / MOSFET gate driver |
| Technology | Infineon thin-film SOI |
| Integrated Bootstrap Diode (BSD) | Yes |
| Over Current Protection (OCP) | Yes |
| Enable Input (EN) | Yes |
| Fault Output | Yes |
| Package | PG-TSSOP-25 |
| Mounting Type | Surface Mount |
| Family | 6EDL04x065xR |
| RoHS Status | Compliant |
| Datasheet Document | Infineon 6EDL04 family datasheet (see datasheet_url) |
6EDL04I065NRXUMA1 Pin Configuration
| Pin 1 | VCC β Logic and low-side supply (typical 15 V) |
| Pin 2 | HIN1 β High-side input phase U |
| Pin 3 | HIN2 β High-side input phase V |
| Pin 4 | HIN3 β High-side input phase W |
| Pin 5 | LIN1 β Low-side input phase U |
| Pin 6 | LIN2 β Low-side input phase V |
| Pin 7 | LIN3 β Low-side input phase W |
| Pin 8 | EN β Enable input (active high) |
| Pin 9 | FAULT β Fault output (open-drain, active low) |
| Pin 10 | ITRIP β Over-current protection input |
| Pin 11 | GND β Logic ground |
| Pin 12 | LO1 β Low-side gate drive phase U |
| Pin 13 | LO2 β Low-side gate drive phase V |
| Pin 14 | LO3 β Low-side gate drive phase W |
| Pin 15 | VS1 β High-side floating supply return phase U |
| Pin 16 | VB1 β Bootstrap supply phase U |
| Pin 17 | HO1 β High-side gate drive phase U |
| Pin 18 | VS2 β High-side floating supply return phase V |
| Pin 19 | VB2 β Bootstrap supply phase V |
| Pin 20 | HO2 β High-side gate drive phase V |
| Pin 21 | VS3 β High-side floating supply return phase W |
| Pin 22 | VB3 β Bootstrap supply phase W |
| Pin 23 | HO3 β High-side gate drive phase W |
| Pin 24 | NC β Not connected (per datasheet) |
| Pin 25 | EP β Exposed thermal pad - connect to GND |
Typical Applications
6EDL04I065NRXUMA1 is suitable for 6 applications: HVAC Compressor Inverter Drive, 3-Phase BLDC Motor Drive, Industrial Pump and Fan Inverter, Solar Micro-Inverter Power Stage, Industrial Servo Drive Power Section, White Goods Motor Control (Washing Machines, Dishwashers).
HVAC Compressor Inverter Drive
The 6EDL04I065NRXUMA1 fits HVAC compressor inverters because its 650 V blocking rating covers the rectified 230/400 V AC bus with sufficient margin, while the three integrated bootstrap diodes eliminate six external discrete components. With 6 non-inverting channels, the IC drives the six IGBTs of a 3-phase inverter in a single package. The integrated OCP and Fault output satisfy the hardware protection requirements of compressor safety standards, and the PG-TSSOP-25 keeps the gate-drive section compact next to the power module.
Recommended
3-Phase BLDC Motor Drive
For 3-phase brushless DC motor drives the 6EDL04I065NRXUMA1 delivers one high-side and one low-side driver per phase, allowing a single IC to control the entire inverter bridge. The non-inverting input logic interfaces directly with MCU PWM outputs. Built-in OCP enables cycle-by-cycle current limiting when paired with a shunt amplifier, while the Fault output can disable the PWM inputs of the host MCU. Thin-film SOI technology provides robust negative transient immunity on the floating high-side rails.
Recommended
Industrial Pump and Fan Inverter
Industrial pumps and fans typically operate from 3-phase mains and need a robust, integrated gate driver with hardware protection. The 6EDL04I065NRXUMA1 matches this requirement with 650 V rating, integrated bootstrap, EN input for hardware shutdown, and Fault reporting for system-level diagnostics. Its SOI level-shift technology tolerates the fast dV/dt transitions of industrial IGBT bridges. The PG-TSSOP-25 footprint and 6-channel integration simplify the gate-drive PCB and reduce wiring complexity.
Recommended
Solar Micro-Inverter Power Stage
In a small solar micro-inverter, the 6EDL04I065NRXUMA1 drives the 3-phase output bridge tied to the low-voltage AC grid, while its 650 V blocking rating provides headroom for the rectified PV bus. Integrated bootstrap diodes cut BOM cost in the cost-sensitive micro-inverter market. The EN pin enables clean power-stage disable during fault or standby, reducing switching losses. Thin-film SOI process provides stable operation over the wide temperature range encountered in outdoor enclosures.
Recommended
Industrial Servo Drive Power Section
Servo drives require precise 3-phase current control with hardware OCP for safety. The 6EDL04I065NRXUMA1 provides three high-side/low-side channel pairs with matched propagation delay, which preserves PWM alignment for current-loop accuracy. The integrated OCP accepts a shunt-amplifier signal at the ITRIP pin and triggers the Fault output within microseconds. The 25-pin PG-TSSOP package exposes a thermal pad to manage dissipation in servo applications with high PWM frequency.
Recommended
White Goods Motor Control (Washing Machines, Dishwashers)
White-goods motor control boards benefit from the 6EDL04I065NRXUMA1's high integration: six channels, integrated bootstrap, OCP, Fault and EN in one TSSOP-25 IC. This reduces the BOM and PCB area needed for the inverter section of a washing machine or dishwasher main motor. The 650 V rating supports worldwide mains (110-240 V AC) without derating. Non-inverting inputs allow direct connection to a low-cost MCU PWM peripheral without glue logic.
Recommended
Recommended Products Summary
Engineering reference data for 6EDL04I065NRXUMA1 β comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | 2EDL8033G4CXTMA1 | IDL04G65C5XUMA2 |
|---|---|---|---|
| Package | PG-TSSOP-25 | PG-TSSOP-25 - same | PG-TSSOP-25 - same |
| Brand | Infineon | Infineon | Infineon |
| Maximum Blocking Voltage | 650 V | 80-100 V (lower rating) | 650 V (same rating) |
| Number of Channels | 6 (3-phase) | 6 (3-phase) | 6 (3-phase) |
| Integrated Bootstrap Diode | Yes | Yes | Yes |
| Over Current Protection | Yes (ITRIP) | Yes | Yes |
| Enable / Fault Pins | Yes (EN + Fault) | Yes | Yes |
| Target Application Class | Industrial mains 230/400 VAC | Low-voltage DC bus | Industrial mains 230/400 VAC |
Key Differentiators
- Single-IC 3-phase gate driver with integrated bootstrap (vs Discrete 3x IR2110SPBF solution)
- Higher blocking voltage (vs 2EDL8033G4CXTMA1)
- Built-in OCP and Fault reporting (vs Discrete 3x IR2110SPBF solution)
Design Notes
Place each bootstrap capacitor as close as possible to its BSTx and VSx pins to minimize parasitic inductance on the high-side floating supply. The IC integrates bootstrap diodes, so only an external capacitor (typically 1 uF X7R) per phase is required. Keep the GND return path of the low-side drivers short and direct to the power-stage shunt resistor to avoid ground bounce during switching.
Do not exceed the 650 V maximum blocking voltage on the high-side rails. The OCP comparator trips on the ITRIP pin voltage threshold; ensure the shunt-amplifier output stays within the linear range of this pin to avoid false trips. If the application requires a negative IGBT turn-off, add a separate gate-emitter resistor and verify it does not exceed the gate-drive sink current rating.
Estimated: at 25 kHz switching frequency, 5 nC gate charge per IGBT, and VCC = 15 V, each of the six channels draws roughly P_gate = 5 nC * 15 V * 6 channels * 25 kHz = 11 mW of gate-drive loss. The PG-TSSOP-25 thermal pad must be soldered to a copper pour of at least 100 mm^2 to keep junction temperature rise below 30 C in typical industrial environments.
Compliance Information
RoHS and lead-free status confirmed by Infineon product page and distributor listings. Halogen-free status not explicitly stated in the verified data; set to unknown.
