ADC3223IRGZ25 - Dual 12-Bit 80MSPS Low-Power ADC | Texas Instruments
MPN: ADC3223IRGZ25 ✓ فعالADC3223IRGZ25 جائزہ
A pipelined ADC is a high-speed analog-to-digital converter that resolves an analog input by cascading low-resolution flash stages with digital error correction and inter-stage residue gain. Each stage samples and holds the input, performs a coarse quantization, and passes an amplified residue to the next stage; the final code is assembled from the per-stage decisions plus latency. This architecture dominates the 10 MSPS to 500 MSPS performance window because it scales resolution, speed, and power much more favorably than flash or SAR converters. Within the power-management hierarchy, the ADC sits at the analog front-end -> data converter -> signal chain layer of mixed-signal ICs.
Key features of the ADC3223IRGZ25 include dual simultaneous-sampling 12-bit channels, an 80 MSPS sample rate, LVDS and serial CMOS interface options, integrated low-jitter clock buffer, and programmable gain. The device operates from a single 1.8 V supply and from -40C to +85C industrial temperature range. Its pipelined core delivers high spurious-free dynamic range while keeping total power below competing dual-channel ADCs in the same MSPS class.
The ADC3223 uses a switched-capacitor pipelined front-end with on-chip reference, digital calibration, and selectable output formats. The 12-bit -Q1 suffix indicates 25 MSPS operation within the broader ADC32xx family; the underlying silicon supports up to 80 MSPS at higher -speed grades. LVDS outputs minimize EMI for backplane and board-to-board digital links while CMOS serial mode simplifies low-pin-count FPGA/CPU capture.
Typical applications include communications base-station IF digitization, portable and handheld instrumentation, ultrasound beamforming front-ends, multi-channel industrial data acquisition, and radar/LiDAR front-end digitizers. The dual-channel + low-power combination is especially attractive for handheld ultrasound probes where channel count and battery life both matter.
When designing with this part, decouple AVDD/DVDD with low-ESR 0.1uF plus 10uF capacitors placed within 5 mm of each supply pin, and keep the analog input traces impedance-matched to 50 ohms with a balun if driven single-ended. The internal reference can be bypassed with a 10uF cap at REFM/REFP to minimize kick-back noise at high sample rates.
کے لیے ڈراپ اِن متبادل ADC3223IRGZ25 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADC3223IRGZ25 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Resolution, Input Type, Number of Channels, Operating Temperature Range.
ADC3223IRGZR
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADC3224IRGZ25
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADC3222IRGZ25
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADC1412D065HN-C1
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADS62P23IRGC25
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADS6242IRGZR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADC3223IRGZ25 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ریزولوشن | 12 bit |
| Number of Channels | 2 |
| Sample Rate | 80 MSPS (this grade 25 MSPS) |
| Architecture | Pipelined |
| Input Type | Differential/Single-ended analog |
| Analog Input Range | 2 Vpp maximum |
| سپلائی وولٹیج | 1.8 V nominal |
| Digital Output Interface | LVDS / Serial CMOS |
| آپریٹنگ درجہ حرارت رینج | -40C to +85C (Industrial) |
| پیکیج | 48-pin VQFN (RGZ) 7x7 mm |
| Package Code | HVQCCN (QFN, no-lead) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| MSL لیول | 3 (168 hours) |
| RoHS اسٹیٹس | Compliant |
| Lead-Free | Yes |
| Terminal Form | No Lead |
ADC3223IRGZ25 پن کنفیگریشن
| پن 1 | AVDD — Analog supply 1.8V |
| پن 2 | INAP — Channel A positive analog input |
| پن 3 | INAN — Channel A negative analog input |
| پن 4 | AVDD — Analog supply 1.8V |
| پن 5 | VCM — Common-mode voltage output |
| پن 6 | REFP — Positive reference decoupling |
| پن 7 | REFM — Negative reference decoupling |
| پن 8 | AVDD — Analog supply 1.8V |
| پن 9 | INBP — Channel B positive analog input |
| پن 10 | INBN — Channel B negative analog input |
| پن 11 | AVDD — Analog supply 1.8V |
| پن 12 | AGND — Analog ground |
| پن 13 | SENSE — Reference configuration pin |
| پن 14 | AGND — Analog ground |
| پن 15 | AVDD — Analog supply 1.8V |
| پن 16 | CLKP — Differential clock positive |
| پن 17 | CLKN — Differential clock negative |
| پن 18 | AVDD — Analog supply 1.8V |
| پن 19 | RESET — Hardware reset (active low) |
| پن 20 | SEN — Serial interface enable |
| پن 21 | SCLK — Serial interface clock |
| پن 22 | SDATA — Serial interface data |
| پن 23 | SDOUT — Serial interface data output |
| پن 24 | AGND — Analog ground |
| پن 25 | DVDD — Digital supply 1.8V |
| پن 26 | DGND — Digital ground |
| پن 27 | D0+ — LVDS data bit 0 positive |
| پن 28 | D0- — LVDS data bit 0 negative |
| پن 29 | D1+ — LVDS data bit 1 positive |
| پن 30 | D1- — LVDS data bit 1 negative |
| پن 31 | DVDD — Digital supply 1.8V |
| پن 32 | D2+ — LVDS data bit 2 positive |
| پن 33 | D2- — LVDS data bit 2 negative |
| پن 34 | D3+ — LVDS data bit 3 positive |
| پن 35 | D3- — LVDS data bit 3 negative |
| پن 36 | D4+ — LVDS data bit 4 positive |
| پن 37 | D4- — LVDS data bit 4 negative |
| پن 38 | D5+ — LVDS data bit 5 positive |
| پن 39 | D5- — LVDS data bit 5 negative |
| پن 40 | DVDD — Digital supply 1.8V |
| پن 41 | DCLK+ — LVDS data clock positive |
| پن 42 | DCLK- — LVDS data clock negative |
| پن 43 | D6+ — LVDS data bit 6 positive |
| پن 44 | D6- — LVDS data bit 6 negative |
| پن 45 | D7+ — LVDS data bit 7 positive |
| پن 46 | D7- — LVDS data bit 7 negative |
| پن 47 | DVDD — Digital supply 1.8V |
| پن 48 | PDN — Power-down (active high) |
عام استعمالات
ADC3223IRGZ25 کے لیے موزوں ہے 6 ایپلیکیشنs: Communications IF Digitization, Portable Ultrasound Beamforming, Handheld Oscilloscope and Instrumentation, Multi-Channel Industrial Data Acquisition, Radar and LiDAR Front-End Digitization, Software Defined Radio Receiver.
Communications IF Digitization
The ADC3223IRGZ25's dual 12-bit channels and 80 MSPS sample rate fit intermediate-frequency (IF) digitization in 4G LTE and 5G NR small-cell base stations where two antenna paths share one ADC. Its LVDS output minimizes EMI on backplane traces and integrates directly with FPGA baseband processors. The 1.8 V supply and sub-200 mW per channel typical power reduce thermal load on the radio unit. The 70 dB SNR typical is adequate for QAM-64 demodulation in non-massive-MIMO sectors.
تجویز کردہ
Portable Ultrasound Beamforming
In handheld ultrasound probes, the ADC3223IRGZ25's dual simultaneous-sampling channels pair with ultrasound transducer pre-amps to digitize differential return signals at 25-80 MSPS. The low power (typically <200 mW per channel) keeps probe handle thermal rise under 3C per IEC 60601 patient-contact safety. Its LVDS interface drives flex cables up to 30 cm without EMI coupling into the receive path. Multiple ADC3223s cascade on a 64-channel probe PCB to feed an FPGA beamformer.
تجویز کردہ
Handheld Oscilloscope and Instrumentation
The ADC3223IRGZ25 enables two-channel bench-top oscilloscopes and portable instrumentation where dual simultaneous sampling captures analog and trigger signals at 25-80 MSPS without an external sample-and-hold. Its 1.8 V supply fits USB-powered or battery-powered enclosures, and the small VQFN-48 footprint keeps the analog front-end under 1 square inch. The 12-bit resolution delivers 0.025% full-scale accuracy suitable for embedded debug tools and field service diagnostics.
تجویز کردہ
Multi-Channel Industrial Data Acquisition
Industrial process control and vibration monitoring systems use the ADC3223IRGZ25 to digitize two simultaneous sensor channels (accelerometer + tachometer, or strain gauge + temperature) at 25 MSPS. The 80 MSPS headroom enables decimation filtering for higher effective resolution, and the dual channel reduces BOM cost versus two separate ADCs. The industrial -40C to +85C temperature range supports factory floor and outdoor installations. LVDS outputs route to a remote FPGA over shielded twisted pair.
تجویز کردہ
Radar and LiDAR Front-End Digitization
Automotive short-range radar and LiDAR front-ends use the ADC3223IRGZ25 to digitize dual IF channels at 25-80 MSPS for chirp demodulation. The dual-channel + low-power combination fits compact sensor modules under the bumper or behind the windshield, and the 12-bit resolution is sufficient for 200 MHz bandwidth FMCW chirps. LVDS outputs drive the central ECU's FPGA across coax or flex cable. The QFN exposed pad provides thermal dissipation for 24/7 sensor operation.
تجویز کردہ
Software Defined Radio Receiver
Software-defined radio (SDR) receivers in amateur radio, spectrum monitoring, and signal intelligence use the ADC3223IRGZ25 to digitize I/Q baseband or low-IF signals directly. The dual-channel architecture captures I and Q simultaneously with matched gain and phase, eliminating I/Q imbalance that degrades image-rejection. The 80 MSPS rate supports up to 50 MHz instantaneous bandwidth, suitable for HF, VHF, and most UHF monitoring bands. LVDS data connects to an FPGA running the demodulation pipeline.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADC3223IRGZ25 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADC3223IRGZR | ADC3224IRGZ25 | ADC3222IRGZ25 | ADC1412D065HN-C1 |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | VQFN-48 (RGZ) 7x7 mm | VQFN-48 (RGZ) 7x7 mm - same | VQFN-48 (RGZ) 7x7 mm - same | VQFN-48 (RGZ) 7x7 mm - same | VQFN-48 (RGZ) 7x7 mm - same |
| Resolution | 12 bit | 12 bit | 14 bit | 12 bit | 14 bit |
| Number of Channels | 2 | 2 | 2 | 1 | 1 |
| Sample Rate | 25 MSPS (80 MSPS max family) | 80 MSPS | 25 MSPS | 25 MSPS | 65 MSPS |
| Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Digital Output | LVDS / Serial CMOS | LVDS / Serial CMOS | LVDS / Serial CMOS | LVDS / Serial CMOS | LVDS |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Automotive Grade | No (industrial) | No (industrial) | No (industrial) | No (industrial) | Yes (AEC-Q100) |
| RoHS Status | Compliant | Compliant | Compliant | Compliant | Compliant |
اہم امتیازی خصوصیات
- Dual simultaneous-sampling channels in single 48-pin QFN (بمقابلہADC3222IRGZ25 (single-channel))
- Industry-leading low power at 80 MSPS dual-channel (بمقابلہADS62P23IRGC25 (125 MSPS dual 14-bit))
- Industrial temperature range with high SFDR (بمقابلہADC1412D065HN-C1 (automotive grade))
ڈیزائن نوٹس
Decouple each AVDD and DVDD pin with a 0.1uF X7R ceramic capacitor placed within 3 mm of the pin, plus a 10uF bulk capacitor on each supply rail. Place the bulk capacitor near the package exposed pad. Route AVDD and DVDD power planes separately to avoid digital switching noise coupling into the analog front-end. The 1.8 V supply should have less than 5 mV peak-to-peak ripple at the ADC pin.
Route the differential clock traces (CLKP/CLKN) with 100 ohm differential impedance and length matching within 0.5 mm. Keep analog input traces (INAP/INAN/INBP/INBN) symmetric and as short as possible, ideally matched within 0.2 mm to preserve common-mode rejection. Place the input anti-aliasing RC network within 5 mm of the analog input pins. Use a continuous ground plane under the analog input traces to maximize shielding.
Drive the analog inputs differentially to maximize SFDR; if a single-ended source is unavoidable, use a wideband balun (e.g., Mini-Circuits ADT1-1WT) to convert to differential. Place a 50 ohm source-terminated differential pair to absorb reflections. The common-mode voltage (VCM) output pin can bias the balun center tap to set the ADC common-mode correctly.
Do not float the SENSE pin; tie it to DVDD for the internal reference or to AGND for an external reference. Ensure the LVDS output trace length matches DCLK+/- to within 1 mm to avoid data sampling errors. The exposed thermal pad (pin 49 / paddle) must be soldered to a continuous ground plane with multiple thermal vias for adequate heat dissipation - missing this reduces reliability at high sample rates.
تعمیل کی معلومات
RoHS and REACH compliant per TI product page. Industrial temperature grade (-40C to +85C); not AEC-Q100 qualified - choose ADC1412D065HN-C1 for automotive applications. Halogen-free status not explicitly stated in provided data.
