Texas Instruments

DS90CR581MTD 24-Bit LVDS FPD Transmitter | TI

MPN: DS90CR581MTD ✓ فعال
56-lead TSSOP Package Phase-locked transmit clock transmitted in parallel Speed
MOQ: 1 |

DS90CR581MTD جائزہ

The Texas Instruments DS90CR581MTD is a 24-bit color flat-panel-display LVDS transmitter that converts 28 bits of CMOS/TTL pixel data into four LVDS data streams and transmits a phase-locked clock in parallel. It is packaged in a low-profile 56-lead TSSOP and operates as a commercial-temperature interface IC for flat-panel display links. The device supports data rates up to 140 megabytes per second and uses narrow differential signaling to reduce cable size, connector count, and system cost. Its LVDS output swing is 290 mV, which is compatible with TIA/EIA-644 signaling practice and is intended for low-EMI display interconnects.

An LVDS transmitter is a high-speed interface device that transmits balanced differential signals over a reduced-voltage physical layer. In the display hierarchy, the DS90CR581MTD is a display interface controller, an interface IC, and ultimately a semiconductor-level signal-conditioning device. Parallel CMOS pixel data enters the transmitter, an internal phase-locked loop derives the transmitted clock, and four differential LVDS lanes carry pixel information plus synchronized data-strobe information.

Key features include support for 24-bit color data, four LVDS outputs, transmission of a phase-locked clock in parallel, rising-edge data strobes, and a power-down mode. The narrow-bus architecture replaces many single-ended interconnects with fewer differential pairs, reducing board routing and cable demands. The internal PLL requires no external components according to the product documentation, simplifying system implementation. A 290 mV LVDS swing also supports low-EMI operation compared with larger single-ended transitions.

The DS90CR581MTD is positioned for legacy flat-panel LCD systems, including monitor and digital display controllers that provide TTL or CMOS pixel data and require conversion to an LVDS panel link. The transmitter handles 28 bits of source data, allowing the system to carry 24 color bits together with synchronization and control information. Its phase-locked transmit clock helps the receiving panel interface recover a stable timing reference.

Use the manufacturer datasheet pin-description table to assign PCB tracks because a complete 56-pin map is not reproduced on this page. Confirm panel-side clock polarity, lane mapping, and input data-strobe timing before releasing a layout. The 56-TSSOP package also requires careful power and ground-plane arrangement to prevent data corruption at high pixel-clock rates.

This page organizes the display-interface details, application fit, package information, and verified comparison points into a practical engineering reference for LCD panel-link designers.

کے لیے ڈراپ اِن متبادل DS90CR581MTD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

DS90CR581MTD تفصیلات

Product Type LVDS Transmitter
Application 24-Bit Color Flat Panel Display Link
Input Data 28 bits CMOS/TTL
Color Data Width 24 bits
LVDS Data Streams 4
Maximum Data Rate 140 MB/s
LVDS Output Swing 290 mV
Clock Transmission Phase-locked transmit clock transmitted in parallel
Data Strobe Edge Rising edge
Power-Down Mode Supported
PLL External Components None required
LVDS Standard Compatibility TIA/EIA-644
Temperature Grade Commercial
Package Type 56-lead TSSOP
Package Shape Rectangular
Terminal Form Gull wing
ماؤنٹنگ ٹائپ Surface mount

DS90CR581MTD rectangular پن کنفیگریشن گائیڈ

DS90CR581MTD (rectangular پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

DS90CR581MTD کے لیے rectangular پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں DS90CR581MTD.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

DS90CR581MTD کے لیے موزوں ہے 6 ایپلیکیشنs: Legacy LCD Monitor Panel Interface, Industrial Flat-Panel Display Controller, TTL-to-LVDS Video Adapter, Digital Signage Panel Link, Medical Display Panel Interface, Test and Measurement Display Module.

🔧

Legacy LCD Monitor Panel Interface

The DS90CR581MTD fits an LCD monitor design in which the display controller still outputs parallel CMOS/TTL pixel data but the panel expects LVDS. The transmitter accepts 28 source bits, supports 24-bit color information, and produces four differential data streams with a nominal 290 mV swing. That arrangement reduces the number of panel interconnects compared with a wide parallel bus. The 140 MB/s maximum data rate must be checked against the target resolution and refresh rate, including timing margins for the selected panel timing controller.

🔧

Industrial Flat-Panel Display Controller

The DS90CR581MTD can bridge a legacy industrial display controller to an LVDS panel that requires low-EMI differential signaling. Its four-lane narrow-bus architecture helps reduce connector and cable requirements, while the transmitted phase-locked clock gives the panel interface a synchronized timing reference. For factory-floor equipment, confirm operating-temperature limits, panel timing, cable length, and grounding strategy before layout release. Commercial temperature grade is documented, and additional environmental qualification should be reviewed for the finished system.

🔧

TTL-to-LVDS Video Adapter

A TTL-to-LVDS adapter built around the DS90CR581MTD is useful when an existing video or graphics controller cannot directly drive a differential panel. The device converts 28 CMOS/TTL bits into four LVDS streams and provides a parallel phase-locked transmit clock. Its low-voltage differential output reduces EMI relative to a comparably wide single-ended link and limits the number of traces crossing between logic and panel sections of the board. Panel lane order, clock polarity, and data-strobe timing must be verified against both endpoint devices.

🔧

Digital Signage Panel Link

The DS90CR581MTD can support a digital-signage panel that retains a legacy parallel display interface but benefits from a lower-EMI connection to the panel electronics. Four LVDS outputs carry the pixel stream at up to 140 MB/s, and the 290 mV swing targets the TIA/EIA-644 signaling approach. Design the system so the controller timing matches the panel's accepted format, then validate the complete chain with long-cable and power-sequencing tests. Cable length and connector construction influence achievable data integrity more than the nominal swing alone.

🔧

Medical Display Panel Interface

The DS90CR581MTD may be used in a medical monitoring display when the display module retains a legacy TTL pixel interface and the system can supply a deterministic LVDS link. Differential signaling reduces common-mode noise and helps maintain image integrity in panels exposed to nearby switching or high-current circuitry. The transmitter itself does not provide medical certification, so the finished display requires appropriate validation. Review panel timing, isolation strategy, fault behavior, and EMI performance as part of the complete system assessment.

🔧

Test and Measurement Display Module

Instrumentation and test equipment can use the DS90CR581MTD when a legacy graphics engine requires conversion to an LVDS panel connection. The integrated four-channel transmitter reduces the component count compared with building a complete LVDS serialization path from discrete logic. The internal PLL requires no external components according to the manufacturer feature list, simplifying implementation. Keep the transmitter's clock and data routing isolated from high-current switching stages, and verify the panel's supported resolution, refresh rate, and synchronization inputs before selecting the module.

What is the DS90CR581MTD used for?
The DS90CR581MTD is a 24-bit color flat-panel-display LVDS transmitter used to convert 28 bits of CMOS/TTL pixel data into four differential LVDS data streams. It also transmits a phase-locked clock in parallel. According to the manufacturer documentation, the device supports data rates up to 140 MB/s and is intended for digital flat-panel display links such as LCD monitors and other legacy TTL-to-LVDS panel interfaces.
How many LVDS data streams does the DS90CR581MTD transmit?
The DS90CR581MTD transmits four LVDS data streams in addition to the phase-locked clock information. Its architecture accepts 28 bits of CMOS/TTL source data, representing 24 color bits plus synchronization and control information. The four-lane narrow-bus arrangement reduces the number of interconnects required between the display controller and the LVDS panel interface compared with a parallel single-ended link.
What is the maximum data rate of the DS90CR581MTD?
The DS90CR581MTD supports data rates up to 140 megabytes per second. The manufacturer documentation identifies this as the bandwidth capability of the 24-bit color flat-panel-display transmitter. When designing the link, verify the required pixel clock against this limit while also accounting for panel timing margins, cable length, connector characteristics, and the selected receiver implementation.
Is the DS90CR581MTD compatible with TIA/EIA-644 LVDS signaling?
Yes, the DS90CR581MTD is compatible with the TIA/EIA-644 LVDS standard for low-voltage differential signaling. Its documented output swing is 290 mV, and the device uses a narrow-bus architecture intended to reduce cable size, system cost, and EMI. Compliance should still be confirmed with the panel receiver and the complete transmitter-to-panel cable configuration.
Does the DS90CR581MTD PLL require external components?
The DS90CR581MTD phase-locked loop requires no external components. The manufacturer feature list specifically identifies the internal PLL design as a simplification for display-link designs. This removes the need for an external loop filter or discrete timing network associated with the transmit clock, while the device still provides a phase-locked clock alongside the four LVDS data outputs.
What package does the DS90CR581MTD use?
The DS90CR581MTD is supplied in a low-profile 56-lead TSSOP package with gull-wing terminals and a rectangular surface-mount body. The 56-lead designation is confirmed by distributor listings and product documentation. Use the package drawing and pin-description table in the manufacturer datasheet for land pattern, pin numbering, and exposed-pad or thermal-layout requirements.
Where can I download the DS90CR581MTD datasheet PDF?
The DS90CR581MTD datasheet PDF is available from the manufacturer-document link on this page and from the National Semiconductor archive mirror listed in the data sources. The document covers the transmitter architecture, electrical characteristics, timing, and pin assignments. Confirm the original National Semiconductor document for the 56-TSSOP version because related DS90CR581 order codes can differ in package or temperature designation.
Where is the DS90CR581MTD pinout documented?
The DS90CR581MTD pinout is documented in the pin-assignment section of the manufacturer datasheet for the 56-lead TSSOP package. A complete 56-terminal map is not reproduced on this page to avoid introducing an incorrect connection. Assign PCB nets from the datasheet table, then verify lane order, synchronization inputs, transmit-clock output, power pins, ground pins, and power-down control against the exact ordering code.
What is the best drop-in replacement for the DS90CR581MTD?
No independently verified drop-in replacement was identified for the DS90CR581MTD. The available cross-reference search did not document a part with the same 56-TSSOP pin assignment, 28-bit CMOS input, four LVDS outputs, and matching panel-interface timing. Use the Texas Instruments cross-reference search tool and compare the complete pin list and timing diagrams before treating any candidate as a substitution.
Can a DS90CF562MTD replace the DS90CR581MTD?
The DS90CF562MTD is not a confirmed drop-in replacement for the DS90CR581MTD. Although both are listed in the Texas Instruments display-interface portfolio and use related 56-TSSOP packaging, a transmitter and a companion interface function must match pin-for-pin and signal-for-signal before substitution. Check the DS90CF562MTD function, LVDS direction, data width, clock architecture, and timing against the DS90CR581MTD datasheets.
When should I choose the DS90CR581MTD instead of a discrete LVDS transmitter solution?
Choose the DS90CR581MTD when a legacy display controller already produces parallel CMOS/TTL pixel data and the panel requires an LVDS link. The integrated transmitter reduces the number of external interface components, provides four LVDS outputs with a 290 mV swing, and avoids external PLL components. A discrete solution remains appropriate when the source already provides differential LVDS or requires a fundamentally different serializer architecture.
Is the DS90CR581MTD suitable for an LCD monitor panel interface?
The DS90CR581MTD is suitable for legacy LCD monitor and flat-panel interfaces that accept 28-bit CMOS/TTL data and require an LVDS panel link. Its 24-bit color capability, four LVDS streams, 140 MB/s maximum data rate, and 290 mV differential output match the stated function for 24-bit color flat-panel displays. Panel-specific resolution, refresh rate, and timing must still be verified against the display controller.
How much LVDS output voltage does the DS90CR581MTD produce?
The DS90CR581MTD produces a nominal 290 mV LVDS output swing. According to the manufacturer feature description, this differential swing supports low-EMI operation and the TIA/EIA-644 signaling approach. When evaluating a complete panel link, include receiver threshold, cable loss, connector loss, and ESD-protection component capacitance because the transmitter specification alone does not guarantee margin at the panel connector.
What are the key specifications engineers should know about the DS90CR581MTD?
The DS90CR581MTD is a 56-TSSOP LVDS transmitter for 24-bit color flat-panel displays. Its principal ratings are 28 CMOS/TTL input bits, four LVDS outputs, a 140 MB/s maximum data rate, a 290 mV output swing, transmitted phase-locked clock, rising-edge data strobe, power-down mode, and an internal PLL requiring no external components. It also conforms to the documented TIA/EIA-644 LVDS signaling approach.
Where can I buy the DS90CR581MTD and what is its lead time?
Use the Request a Quote form on this page to request DS90CR581MTD availability, current lead time, and order confirmation from XAIPART. The distributor listing confirms the exact 56-TSSOP ordering code, but stock and lead time change with market conditions. Provide the required quantity, target date, and whether you need tape-and-reel, tray, or cut-tape packaging when submitting the request.
How should power and ground be routed for a DS90CR581MTD design?
Route the DS90CR581MTD power and ground connections directly to the nearest solid ground and power planes, and place local bypass capacitors close to the device supply pins. Keep the 290 mV differential pairs short, length-matched, and routed away from clocks and switching regulators. Use the datasheet pin table and recommended-layout guidance for exact connections, and check return paths so LVDS currents do not share noisy supply traces.

کے لیے انجینئرنگ ریفرنس ڈیٹا DS90CR581MTD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the DS90CR581MTD when the source is a legacy 28-bit CMOS/TTL display controller and the destination panel requires a four-lane LVDS interface. Its documented 140 MB/s rate, 290 mV differential swing, internal PLL without external components, and 56-lead TSSOP package make it suitable for established flat-panel link architectures. Choose a different transmitter when the source already produces LVDS, the panel requires a different lane count or clock format, or the required pixel clock exceeds 140 MB/s. Treat the DS90CF562MTD as a related interface device rather than a drop-in substitute until pin direction, data width, and timing are matched line by line. For new designs with an available LVDS-capable controller, an integrated controller-plus-transmitter solution can reduce board area and design effort.

ڈیزائن نوٹس

Route the four LVDS differential pairs as tightly coupled pairs with matched length and continuous reference planes beneath them. Keep the pairs away from switching-regulator inductors, crystal circuits, and high-current return paths. Because the device uses only a 290 mV nominal differential swing, unnecessary loop area and crosstalk can matter more than they would with a large-amplitude single-ended interface. Confirm the final stack-up and trace geometry against the manufacturer layout guidance.

Place bypass capacitors immediately across the device supply and ground pins, using the values and connection sequence specified in the manufacturer datasheet. Route the transmitter return current through the same reference plane as the outgoing LVDS pairs to limit loop impedance. If the panel link shares a board with switching converters or display backlight drivers, separate their high-current paths and verify supply noise at the transmitter with an oscilloscope under worst-case pixel activity.

Validate lane mapping, transmitted-clock polarity, and rising-edge data-strobe timing with the exact panel receiver rather than assuming compatibility from connector pin order alone. The four data streams and parallel phase-locked clock must meet the receiver's setup and hold requirements at the maximum supported data rate. Include eye-quality, jitter, and power-sequencing checks with representative cables and connectors because transmitter specifications alone do not guarantee end-to-end margin.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The commercial-temperature classification and TIA/EIA-644 signaling compatibility are documented. RoHS, REACH, halogen-free, lead-free, and conflict-minerals statuses were not stated in the product information and remain unknown.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

DS90CR581MTD datasheet DS90CR581MTD pinout DS90CR581MTD datasheet pdf Texas Instruments DS90CR581MTD DS90CR581MTD equivalent DS90CR581MTD drop-in replacement DS90CR581MTD cross reference DS90CR581MTD vs DS90CF562MTD DS90CR581MTD price DS90CR581MTD stock 56-TSSOP LVDS transmitter DS90CR581MTD 24-bit flat panel link

متعلقہ اجزاء اور اصطلاحات

Texas Instruments National Semiconductor DS90CR581MTD DS90CR581 DS90CF562MTD LVDS transmitter flat-panel display link display interface controller interface IC CMOS/TTL input LVDS output TIA/EIA-644 phase-locked loop phase-locked transmit clock 24-bit color 290 mV output swing 140 MB/s data rate power-down mode rising-edge data strobe 56-lead TSSOP surface-mount package low-EMI signaling narrow-bus architecture LCD monitor
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں