DS90LV001TMX - 800 Mbps LVDS Buffer | Texas Instruments
MPN: DS90LV001TMX ✗ اختتامِ زندگیDS90LV001TMX جائزہ
An LVDS buffer is a digital interface component in the LVDS interface IC family. LVDS, or Low-Voltage Differential Signaling, uses low-amplitude differential voltage to transmit high-speed data with common-mode noise rejection and reduced electromagnetic emissions. A buffer placed in the signal path can extend usable distribution distance, isolate a transmitter from capacitive loading, and reduce the effect of imperfect terminations. The DS90LV001 family is therefore positioned between an LVDS transmitter and downstream LVDS receivers within the broader interface IC and semiconductor hierarchy.
The principal electrical characteristic is an 800-Mbps data rate, suitable for high-speed backplane links, industrial control systems, communications equipment, and test platforms. The verified distributor description identifies the DS90LV001TMX as a single-channel LVDS buffer in an 8-SOIC package with an industrial temperature range from -40°C to +85°C. The output-enable pin allows the output to be disabled for bus sharing, controlled test modes, power-management schemes, or designs that need a high-impedance state during transitions.
The device is designed to address signal-conditioning problems caused by transmission-line reflections, loading, and stub length. In large systems, the distance between a transmission line and an unterminated receiver on an individual card can limit system speed. A dedicated LVDS buffer can be placed near the receiver or at a card boundary to create a controlled signal path. Designers must still use suitable transmission-line geometry, correct source and load terminations, and a return-path reference to obtain reliable operation.
Typical applications include LVDS backplane buffering, point-to-point high-speed links, industrial data acquisition, communications racks, and instrumentation platforms. The 800-Mbps capability makes the device appropriate for systems that need one LVDS signal to be redistributed or isolated without changing the underlying differential signaling format. The output-enable function is especially useful where multiple buffers share a bus or where the receiver must be disconnected during a controlled system state.
When laying out a circuit using the DS90LV001TMX, place the device close to the source or receiver whose loading is being isolated. Route the differential pair as a controlled-impedance transmission line, keep the pair geometry consistent, and terminate the line according to the system architecture. Check the datasheet's absolute maximum ratings, supply recommendations, and propagation-delay information before finalizing a high-speed design.
This page combines the manufacturer identification, package information, lifecycle status, verified distributor references, practical interface-design guidance, and a conservative comparison of available replacement information. It is intended to help engineers evaluate whether the DS90LV001TMX remains appropriate for an existing LVDS design or whether an alternate sourcing strategy is required.
کے لیے ڈراپ اِن متبادل DS90LV001TMX — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں DS90LV001TMX (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Operating Temperature Range.
DS90LV001TMX/NOPB
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DS90LV001TM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DS90LV001TMX تفصیلات
| Device Type | LVDS-to-LVDS buffer |
| ڈیٹا ریٹ | 800 Mbps |
| Channel Count | 1 channel |
| Input Signal | LVDS |
| Output Signal | LVDS |
| Output Enable | Available; supports TRI-STATE output |
| پیکیج | 8-SOIC |
| آپریٹنگ درجہ حرارت | -40°C to +85°C |
| Logic Family | LVDS |
| Application | Backplane and high-speed data distribution |
| Signal Integrity Role | Signal buffering and receiver isolation |
| ماؤنٹنگ ٹائپ | Surface mount |
| Manufacturer | Texas Instruments |
| لائف سائیکل کی حالت | Obsolete and no longer manufactured |
DS90LV001TMX 8-soic پن کنفیگریشن گائیڈ
DS90LV001TMX (8-soic پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں DS90LV001TMX.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
DS90LV001TMX کے لیے موزوں ہے 6 ایپلیکیشنs: High-Speed Backplane Buffering, Point-to-Point LVDS Link Isolation, Industrial Data Acquisition, Communications Rack Interconnect, Test and Measurement Front Ends, Synchronized Video and Imaging Systems.
High-Speed Backplane Buffering
The DS90LV001TMX fits at a card boundary or receiver input in an 800-Mbps LVDS backplane, where a controlled buffer can isolate the upstream transmitter from downstream board capacitance. Its LVDS-to-LVDS signal path preserves the differential signaling format while the 8-SOIC package supports conventional surface-mount assembly. The design must still use controlled-impedance routing, suitable terminations, and a continuous reference plane to preserve signal integrity.
تجویز کردہ
Point-to-Point LVDS Link Isolation
Use the DS90LV001TMX when a point-to-point 800-Mbps LVDS link needs source or receiver isolation. The buffer can reduce the loading seen by the original transmitter when placed near the receiving endpoint, helping separate the signal source from cable, connector, and board capacitance. Its output-enable function also permits the output to enter TRI-STATE during controlled bus states, although timing and state sequencing should follow the manufacturer guidance.
تجویز کردہ
Industrial Data Acquisition
The DS90LV001TMX is suitable for industrial data-acquisition equipment that distributes differential clock or data signals at up to 800 Mbps. Its -40°C to +85°C operating range supports industrial-temperature environments, while the LVDS interface provides a practical basis for reliable transfer across cables or inter-card links. Engineers should verify grounding, connector return paths, and termination values for the complete acquisition channel.
تجویز کردہ
Communications Rack Interconnect
In a communications rack, the DS90LV001TMX can buffer an 800-Mbps LVDS signal between line cards where stub length or loading would otherwise degrade margin. Placing it close to the receiving card helps control the electrical environment seen by that card. The single-channel SOIC-8 implementation is particularly useful when only one differential route requires buffering and additional fan-out is not needed.
تجویز کردہ
Test and Measurement Front Ends
The DS90LV001TMX can serve as a signal-conditioning element in test and measurement front ends that distribute high-speed differential clock or data signals. Buffering near the instrument input can reduce sensitivity to source loading and provide controlled high-impedance output states. For accurate measurements, keep the differential pair geometry consistent, minimize discontinuities, and confirm that probe, connector, and termination effects do not dominate the channel behavior.
تجویز کردہ
Synchronized Video and Imaging Systems
The 800-Mbps DS90LV001TMX can buffer differential synchronization or data links in imaging systems where multiple circuit blocks require consistent signal arrival. Its output-enable pin supports controlled isolation during operating states, while the LVDS electrical interface suits compact, high-speed boards. Layout should preserve differential symmetry and maintain adequate return-path continuity across board and connector transitions.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا DS90LV001TMX — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | DS90LV001TMX/NOPB | DS90LV001TM |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-SOIC | 8-SOIC - same package | 8-SOIC - same package |
| Function | Single-channel LVDS-to-LVDS buffer | Single-channel LVDS-to-LVDS buffer | DS90LV001 LVDS buffer |
| Data Rate | 800 Mbps | 800 Mbps | 800 Mbps |
| Output Enable | Yes; TRI-STATE supported | Yes; functional and terminal characteristics are consistent | Yes; same DS90LV001 family |
اہم امتیازی خصوصیات
- Documented drop-in ordering option (بمقابلہDS90LV001TMX/NOPB)
- Same 800-Mbps LVDS buffer function (بمقابلہDS90LV001TM)
- Output control for isolated bus states (بمقابلہDS90LV001TMX/NOPB)
ڈیزائن نوٹس
Place the DS90LV001TMX close to the endpoint that requires isolation, especially on a card with connector, trace, or receiver capacitance. Route the differential pair with continuous reference-plane return and matched spacing. The buffer can isolate loading, but it cannot correct mismatched impedance, discontinuity, or improper terminations in the complete channel.
Use the manufacturer pin-description table to assign the 8-SOIC connections and preserve the differential geometry from the input through the device to the output. Keep supply and ground connections short, provide a solid ground reference, and avoid routing the LVDS pair beneath switching or other high-current paths. Validate the final stack-up with controlled-impedance calculations.
Do not assume that a family-member suffix is automatically interchangeable in every purchasing environment. Compare the exact orderable drawing, pin names, electrical limits, temperature grade, lead finish, and traceability requirements with the Texas Instruments datasheet. The verified comparison supports DS90LV001TMX/NOPB as package and terminal compatible, but production approval should still be based on the exact suffix documentation.
Use a clean, low-impedance supply and ground arrangement around the 8-SOIC device. Place local high-frequency bypassing at the supply pins according to the manufacturer layout recommendations and keep return-current paths continuous. Confirm the actual supply voltage, current, and bypass values in the manufacturer datasheet before release because those numerical requirements are not stated in the product-page references.
تعمیل کی معلومات
The verified references discuss the obsolete lifecycle state and device function but do not explicitly establish the requested compliance categories. The NOPB suffix commonly denotes a lead-free ordering option, but that is not treated as explicit lead-free evidence without the relevant manufacturer declaration.