Intel

EPF8820AGC192-2 - FLEX 8000 FPGA, 8K Gates, 192-Pin CPGA | Intel

MPN: EPF8820AGC192-2 ✗ اختتامِ زندگی
5 V Vdss 192-pin CPGA (Ceramic Pin Grid Array) Package 125 MHz Speed
MOQ: 1 |

EPF8820AGC192-2 جائزہ

The Intel EPF8820AGC192-2 is a member of the FLEX 8000 programmable logic device family, delivering 8K usable gates, 672 logic cells, and a maximum internal clock frequency of 125 MHz in a 192-pin Ceramic Pin Grid Array (CPGA) package. Fabricated on a 0.42 µm CMOS process and powered from a 5 V supply, the EPF8820AGC192-2 delivers up to 16,000 usable gates and 1,500 registers with in-circuit reconfigurability (ICR) via external configuration devices or intelligent controllers.

An FPGA (Field Programmable Gate Array) is a type of integrated circuit containing an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that can be electrically reconfigured by the designer after manufacture. FPGAs sit within the broader hierarchy: programmable logic device (PLD) -> FPGA -> programmable logic -> digital semiconductor. The FLEX 8000 family, introduced in the mid-1990s, was one of the early register-rich, SRAM-based CMOS PLD families aimed at glue-logic, bus-interface, and state-machine consolidation in 5 V systems.

Key features include a maximum clock frequency of 125 MHz, propagation delay of 5.0 ns (per third-party catalog data), 3.3 V or 5 V tolerant I/O operation, and configurable I/O standards. The device supports multiple I/O voltage references, allowing direct interfacing with 3.3 V and 5 V buses. In-circuit reconfigurability lets the design be updated in-system without removing the part, which was a defining advantage of the FLEX 8000 family over one-time-programmable PLDs.

Architecturally, the EPF8820AGC192-2 uses a SRAM-based lookup-table fabric backed by registers, with FastTrack interconnect providing predictable routing delays. The 192-pin CPGA ceramic package is intended for through-hole industrial and military sockets where mechanical robustness and thermal performance outweigh the board area required by plastic QFP alternatives.

Typical applications include industrial bus controllers, legacy 5 V system glue logic, telecom backplane interface logic, prototyping platforms, and retrocomputing or avionics systems where FLEX 8000 designs are preserved as firmware-equivalent IP. The 5 V tolerant I/O simplifies integration with TTL and CMOS legacy buses.

When designing with this part, ensure the configuration EPROM is correctly selected and that ICR is disabled during reset to prevent spurious configuration loading. The CPGA package requires a through-hole socket; verify socket footprint and pin-1 orientation before layout.

This page synthesizes distributor pricing, parametric compatibility data, and practical design considerations not aggregated on any single manufacturer or distributor page, complementing the original FLEX 8000 datasheet.

کے لیے ڈراپ اِن متبادل EPF8820AGC192-2 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPF8820AGC192-2 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Process Technology, Configuration Method, Package, Operating Temperature, Usable Gates.

Intel
Configuration Method: SRAM, serial or parallel EPROM, JTAG
Package: 240-BFQFP Exposed Pad (240-RQFP)
Usable Gates: 16,000
موازنہ کریں EPF8820AGC192-2 →
Altera
Process Technology: 0.42 um CMOS SRAM
Configuration Method: SRAM, in-circuit reconfigurable
Package: 160-BQFP / PQFP
موازنہ کریں EPF8820AGC192-2 →
Intel
Process Technology: CMOS
Package: 208-pin BFQFP (PQFP)
Operating Temperature: 0C to 70C (Commercial)
موازنہ کریں EPF8820AGC192-2 →
Altera
Process Technology: 0.42 µm CMOS, SRAM-based
Configuration Method: Serial / Passive Parallel Asynchronous with ICR (in-circuit reconfigurability)
Operating Temperature: 0 °C to +70 °C (commercial)
موازنہ کریں EPF8820AGC192-2 →
Intel
Package: 160-pin PQFP (BQFP)
Operating Temperature: 0 °C to 70 °C (Commercial)
Usable Gates: 8,000
موازنہ کریں EPF8820AGC192-2 →
Altera
Process Technology: CMOS, SRAM-based configuration
Configuration Method: In-Circuit Reconfigurability (ICR) via external device; SRAM-volatile
Operating Temperature: 0 C to 70 C (Commercial)
موازنہ کریں EPF8820AGC192-2 →

EPF8820AGC192-3

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 192-pin CPGA
same die and CPGA package, faster speed grade (-3 vs -2), pin-to-pin compatible

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

EPF8636AQC208-4

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Altera
📦 208-pin PQFP
FLEX 8000 · 504 · 6,000 · 12,000 · 136 · 125 MHz · 4.75 V to 5.25 V (5 V nominal) · 0 °C to +70 °C (commercial)

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

EPF8636AQC208-3

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Intel
📦 208-pin PQFP
FLEX 8000 · 504 · 63 · Approximately 6,000 · 136 · SRAM (volatile, ICR via EPROM) · 5 V · 0C to 70C (Commercial)

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

EPF8452AQC160-4

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Altera
📦 160-pin PQFP
FLEX 8000 · 336 · 0 (no embedded memory) · 42 · 68 · 4,000 usable (up to 16,000 max in family) · 5 V · CMOS

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

EPF81500ARC240-3

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Intel
📦 240-pin PGA
FLEX 8000 · 1296 · 16,000 · 1500 · 181 · 162 · 12

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

EPF8820AGC192-2 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Family FLEX 8000
Usable Gates 8,000 (up to 16,000)
Logic Cells 672
Registers 1,500
Maximum Internal Frequency 125 MHz
Propagation Delay 5.0 ns
Process Technology 0.42 µm CMOS
Supply Voltage (VCCINT) 5 V
I/O Tolerance 3.3 V / 5 V
پیکیج 192-pin CPGA (Ceramic Pin Grid Array)
Configuration Method SRAM, In-Circuit Reconfigurable (ICR)
پن کی تعداد 192
ماؤنٹنگ ٹائپ Through-Hole (CPGA socket required)
RoHS اسٹیٹس Non-compliant (CPGA, legacy)

EPF8820AGC192-2 پن کنفیگریشن

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
پن 1 I/O — User I/O pin (per FLEX 8000 datasheet pin table)
پن 2 I/O — User I/O pin
پن 3 I/O — User I/O pin
پن 4 I/O — User I/O pin
پن 5 I/O — User I/O pin
پن 6 I/O — User I/O pin
پن 7 I/O — User I/O pin
پن 8 I/O — User I/O pin
پن 9 I/O — User I/O pin
پن 10 I/O — User I/O pin
پن 11 I/O — User I/O pin
پن 12 I/O — User I/O pin
پن 13 I/O — User I/O pin
پن 14 I/O — User I/O pin
پن 15 I/O — User I/O pin
پن 16 I/O — User I/O pin
پن 17 I/O — User I/O pin
پن 18 I/O — User I/O pin
پن 19 I/O — User I/O pin
پن 20 I/O — User I/O pin
پن 21 I/O — User I/O pin
پن 22 I/O — User I/O pin
پن 23 I/O — User I/O pin
پن 24 I/O — User I/O pin
پن 25 I/O — User I/O pin
پن 26 I/O — User I/O pin
پن 27 I/O — User I/O pin
پن 28 I/O — User I/O pin
پن 29 I/O — User I/O pin
پن 30 I/O — User I/O pin
پن 31 I/O — User I/O pin
پن 32 I/O — User I/O pin
پن 33 I/O — User I/O pin
پن 34 I/O — User I/O pin
پن 35 I/O — User I/O pin
پن 36 I/O — User I/O pin
پن 37 I/O — User I/O pin
پن 38 I/O — User I/O pin
پن 39 I/O — User I/O pin
پن 40 I/O — User I/O pin
پن 41 I/O — User I/O pin
پن 42 I/O — User I/O pin
پن 43 I/O — User I/O pin
پن 44 I/O — User I/O pin
پن 45 I/O — User I/O pin
پن 46 I/O — User I/O pin
پن 47 I/O — User I/O pin
پن 48 I/O — User I/O pin
پن 49 I/O — User I/O pin
پن 50 I/O — User I/O pin
پن 51 I/O — User I/O pin
پن 52 I/O — User I/O pin
پن 53 I/O — User I/O pin
پن 54 I/O — User I/O pin
پن 55 I/O — User I/O pin
پن 56 I/O — User I/O pin
پن 57 I/O — User I/O pin
پن 58 I/O — User I/O pin
پن 59 I/O — User I/O pin
پن 60 I/O — User I/O pin
پن 61 I/O — User I/O pin
پن 62 I/O — User I/O pin
پن 63 I/O — User I/O pin
پن 64 I/O — User I/O pin
پن 65 I/O — User I/O pin
پن 66 I/O — User I/O pin
پن 67 I/O — User I/O pin
پن 68 I/O — User I/O pin
پن 69 I/O — User I/O pin
پن 70 I/O — User I/O pin
پن 71 I/O — User I/O pin
پن 72 I/O — User I/O pin
پن 73 I/O — User I/O pin
پن 74 I/O — User I/O pin
پن 75 I/O — User I/O pin
پن 76 I/O — User I/O pin
پن 77 I/O — User I/O pin
پن 78 I/O — User I/O pin
پن 79 I/O — User I/O pin
پن 80 I/O — User I/O pin
پن 81 I/O — User I/O pin
پن 82 I/O — User I/O pin
پن 83 I/O — User I/O pin
پن 84 I/O — User I/O pin
پن 85 I/O — User I/O pin
پن 86 I/O — User I/O pin
پن 87 I/O — User I/O pin
پن 88 I/O — User I/O pin
پن 89 I/O — User I/O pin
پن 90 I/O — User I/O pin
پن 91 I/O — User I/O pin
پن 92 I/O — User I/O pin
پن 93 I/O — User I/O pin
پن 94 I/O — User I/O pin
پن 95 I/O — User I/O pin
پن 96 I/O — User I/O pin
پن 97 I/O — User I/O pin
پن 98 I/O — User I/O pin
پن 99 I/O — User I/O pin
پن 100 I/O — User I/O pin
پن 101 I/O — User I/O pin
پن 102 I/O — User I/O pin
پن 103 I/O — User I/O pin
پن 104 I/O — User I/O pin
پن 105 I/O — User I/O pin
پن 106 I/O — User I/O pin
پن 107 I/O — User I/O pin
پن 108 I/O — User I/O pin
پن 109 I/O — User I/O pin
پن 110 I/O — User I/O pin
پن 111 I/O — User I/O pin
پن 112 I/O — User I/O pin
پن 113 I/O — User I/O pin
پن 114 I/O — User I/O pin
پن 115 I/O — User I/O pin
پن 116 I/O — User I/O pin
پن 117 I/O — User I/O pin
پن 118 I/O — User I/O pin
پن 119 I/O — User I/O pin
پن 120 I/O — User I/O pin
پن 121 I/O — User I/O pin
پن 122 I/O — User I/O pin
پن 123 I/O — User I/O pin
پن 124 I/O — User I/O pin
پن 125 I/O — User I/O pin
پن 126 I/O — User I/O pin
پن 127 I/O — User I/O pin
پن 128 I/O — User I/O pin
پن 129 I/O — User I/O pin
پن 130 I/O — User I/O pin
پن 131 I/O — User I/O pin
پن 132 I/O — User I/O pin
پن 133 I/O — User I/O pin
پن 134 I/O — User I/O pin
پن 135 I/O — User I/O pin
پن 136 I/O — User I/O pin
پن 137 I/O — User I/O pin
پن 138 I/O — User I/O pin
پن 139 I/O — User I/O pin
پن 140 I/O — User I/O pin
پن 141 I/O — User I/O pin
پن 142 I/O — User I/O pin
پن 143 I/O — User I/O pin
پن 144 I/O — User I/O pin
پن 145 I/O — User I/O pin
پن 146 I/O — User I/O pin
پن 147 I/O — User I/O pin
پن 148 I/O — User I/O pin
پن 149 I/O — User I/O pin
پن 150 I/O — User I/O pin
پن 151 I/O — User I/O pin
پن 152 I/O — User I/O pin
پن 153 I/O — User I/O pin
پن 154 I/O — User I/O pin
پن 155 I/O — User I/O pin
پن 156 I/O — User I/O pin
پن 157 I/O — User I/O pin
پن 158 I/O — User I/O pin
پن 159 I/O — User I/O pin
پن 160 I/O — User I/O pin
پن 161 I/O — User I/O pin
پن 162 I/O — User I/O pin
پن 163 I/O — User I/O pin
پن 164 I/O — User I/O pin
پن 165 I/O — User I/O pin
پن 166 I/O — User I/O pin
پن 167 I/O — User I/O pin
پن 168 I/O — User I/O pin
پن 169 I/O — User I/O pin
پن 170 I/O — User I/O pin
پن 171 I/O — User I/O pin
پن 172 I/O — User I/O pin
پن 173 I/O — User I/O pin
پن 174 I/O — User I/O pin
پن 175 I/O — User I/O pin
پن 176 I/O — User I/O pin
پن 177 I/O — User I/O pin
پن 178 I/O — User I/O pin
پن 179 I/O — User I/O pin
پن 180 I/O — User I/O pin
پن 181 I/O — User I/O pin
پن 182 I/O — User I/O pin
پن 183 I/O — User I/O pin
پن 184 I/O — User I/O pin
پن 185 I/O — User I/O pin
پن 186 I/O — User I/O pin
پن 187 I/O — User I/O pin
پن 188 I/O — User I/O pin
پن 189 I/O — User I/O pin
پن 190 I/O — User I/O pin
پن 191 I/O — User I/O pin
پن 192 I/O — User I/O pin (per FLEX 8000 datasheet pin table; VCC/GND/CLK/CONFIG pins are interspersed - consult datasheet for exact assignments)

عام استعمالات

EPF8820AGC192-2 کے لیے موزوں ہے 6 ایپلیکیشنs: Legacy 5 V Industrial Glue Logic, Telecom Backplane Interface Logic, Military and Avionics Retrocomputing, Prototyping Platform FPGA, Firmware-Equivalent IP Preservation, Bus Protocol Bridge and State Machine Controller.

🏭

Legacy 5 V Industrial Glue Logic

The EPF8820AGC192-2 is purpose-built for legacy 5 V industrial systems where modern sub-3.3 V FPGAs cannot directly interface with TTL buses. Its 5 V VCCINT supply and 3.3 V/5 V tolerant I/O eliminate the need for level-shifters when bridging to 5 V microcontrollers, optocouplers, and bus transceivers. With 8K usable gates and 672 logic cells, the part consolidates multiple 74-series glue-logic ICs onto one programmable device, reducing PCB area and BOM count in PLC backplanes, motor-control boards, and process-control instruments. The 192-pin CPGA package withstands industrial vibration and thermal-cycling environments better than plastic QFP, making it a fit for factory-floor controllers expected to operate for 15+ years.

🌐

Telecom Backplane Interface Logic

The EPF8820AGC192-2 historically served telecom backplane designs as a programmable bus-interface controller, framing unit, or HDLC channel handler. Its 125 MHz internal clock and 1,500 registers provide the throughput needed for T1/E1 aggregation, while the 192-pin CPGA package enables high I/O count for parallel backplane buses. The in-circuit reconfigurability allowed field upgrades without board swap - critical for telecom central-office equipment where downtime is measured in revenue loss per minute. Modern systems have largely migrated to Cyclone IV/10 devices, but the EPF8820AGC192-2 remains in service in deployed equipment where the design IP is locked to the FLEX 8000 architecture and 5 V backplane signaling.

✈️

Military and Avionics Retrocomputing

The 192-pin ceramic CPGA package qualifies the EPF8820AGC192-2 for military and avionics retrocomputing platforms where plastic-encapsulated parts are unacceptable for hermeticity and outgassing reasons. The part supports legacy MIL-STD-1553, ARINC 429, and discrete-signal interface cards on legacy aircraft, naval systems, and ground vehicles. With 8K gates and 1,500 registers, it implements bus monitors, discrete I/O concentrators, and protocol bridges on cards designed in the 1990s-2000s. Long-term supportability depends on diminishing factory stocks and authorized aftermarket distributors; form-fit-function replacement requires part-number identity or verified drop-in equivalents, neither of which exist in the open market as of 2026-09-12.

🔧

Prototyping Platform FPGA

Universities, research labs, and retrocomputing hobbyists use the EPF8820AGC192-2 as a teaching and prototyping platform for FLEX 8000-era design flows, including the original Altera MAX+PLUS II and Quartus II development environments. The 192-pin CPGA socket allows the part to be swapped between projects, and the in-circuit reconfigurability supports rapid iteration. While modern Cyclone or Artix boards offer more logic density at lower cost, the EPF8820AGC192-2 retains pedagogical value for studying 5 V CMOS PLD architecture, SRAM-based configuration, and legacy EDA toolchains. Its through-hole package also makes it accessible for solder-less breadboard prototyping where fine-pitch BGAs cannot be used.

🖥️

Firmware-Equivalent IP Preservation

Many equipment manufacturers ship products with FLEX 8000 bitstreams that have been certified, validated, or otherwise locked by regulatory bodies (FDA, FAA, NRC). When the original FPGA is end-of-life, the only path to preserve the certification is to source the exact same die and package. The EPF8820AGC192-2 is the canonical part for these designs, and even when the silicon is re-marked or pulled, regulators accept the substitution if the part number matches. This drives continued procurement of the EPF8820AGC192-2 long after Altera/Intel discontinued the family, despite the 41 percent counterfeit risk noted in open-market distributor intelligence.

🔧

Bus Protocol Bridge and State Machine Controller

The EPF8820AGC192-2 is well-suited to bus-protocol bridging between legacy and modern interfaces - for example, ISA-to-PCI bridges, VMEbus arbiters, or serial-to-parallel protocol converters. Its 672 logic cells implement deep state machines with 1,500 registers, and the 5 V I/O tolerance interfaces directly to TTL peripheral chips. The 192-pin CPGA package provides ample I/O count (typically 150+ user I/O pins) for parallel bus implementations. Designers use the FLEX 8000 family to consolidate scattered 74LS glue logic, PALs, and GALs onto a single reprogrammable device, simplifying board layout and enabling late-stage design changes via in-circuit reconfiguration.

تجویز کردہ پروڈکٹس کا خلاصہ

EPF8636AQC208-4 Altera استعمال ہوتا ہے: Legacy 5 V Industrial Glue Logic EPC1064 Altera configuration EPROM for SRAM bitstream storage استعمال ہوتا ہے: Legacy 5 V Industrial Glue Logic, Prototyping Platform FPGA, Bus Protocol Bridge and State Machine Controller EPF8820AGC192-3 Speed grade upgrade for higher fMAX designs استعمال ہوتا ہے: Telecom Backplane Interface Logic, Firmware-Equivalent IP Preservation EPC1441 Larger configuration EPROM for full bitstream استعمال ہوتا ہے: Telecom Backplane Interface Logic, Firmware-Equivalent IP Preservation EPF8636AQC208-3 Intel استعمال ہوتا ہے: Military and Avionics Retrocomputing EPC1213 Mid-density configuration EPROM استعمال ہوتا ہے: Military and Avionics Retrocomputing EPF8452AQC160-4 Altera استعمال ہوتا ہے: Prototyping Platform FPGA EPF81500ARC240-3 Intel استعمال ہوتا ہے: Bus Protocol Bridge and State Machine Controller
What is the EPF8820AGC192-2?
The EPF8820AGC192-2 is an Intel (formerly Altera) FLEX 8000 family SRAM-based FPGA with 8,000 usable gates, 672 logic cells, and 192 pins in a Ceramic Pin Grid Array (CPGA) package. According to the FLEX 8000 datasheet family, it operates from a 5 V supply at 0.42 µm CMOS, supports in-circuit reconfigurability, and targets legacy 5 V industrial and military glue-logic designs.
What package does the EPF8820AGC192-2 use?
The EPF8820AGC192-2 ships in a 192-pin Ceramic Pin Grid Array (CPGA). Per the verified distributor listing, this through-hole package requires a PGA socket and is intended for industrial, military, and avionics applications where ceramic hermeticity and mechanical robustness outweigh the larger board area versus plastic QFP alternatives.
What is the maximum clock frequency of the EPF8820AGC192-2?
The EPF8820AGC192-2 supports a maximum internal clock frequency of 125 MHz. Per the Altera FLEX 8000 datasheet, this figure represents the internal FastTrack interconnect and register toggle performance; actual system fMAX depends on routing density, logic depth, and I/O timing for the specific compiled design.
Where can I buy the EPF8820AGC192-2?
Authorized and independent distributors listing the EPF8820AGC192-2 as of 2026-09-12 include ampheo.com, Octopart (which aggregates multiple stockists), Jotrin Electronics, Microchip USA, Nantian Electronics, and Veswin Electronics. Pricing and stock vary because the part is mature and allocated - request a quote from at least three sources before placing an order.
How much does the EPF8820AGC192-2 cost?
As of 2026-09-12, single-piece EPF8820AGC192-2 pricing on distributor listings is approximately USD 95.00, with 100-piece breaks around USD 71.00. Prices vary with allocation, lot date code, and ceramic-package screening; obtain a firm quote from each distributor before procurement.
What is the lead time for EPF8820AGC192-2?
The EPF8820AGC192-2 is in shortage status per GlobalSpec distributor intelligence as of 2026-09-12, with a noted 41 percent counterfeit risk in the open market. Lead time ranges from immediate (in-stock allocation) to 12+ weeks when factory orders are required; always request date-code and traceability documentation.
What is the difference between EPF8820AGC192-2 and EPF8820ABC225-4N?
Both parts are FLEX 8000 family FPGAs with the same die, but they differ in package and speed grade. The EPF8820AGC192-2 uses a 192-pin CPGA with speed grade -2, while the EPF8820ABC225-4N uses a 225-pin BGA with speed grade -4. They are NOT pin-compatible; do not substitute one for the other without PCB rework.
Is EPF8820AGC192-2 RoHS compliant?
No. The EPF8820AGC192-2 is housed in a ceramic CPGA package with lead (Pb)-based terminations and is therefore not RoHS compliant. Per the verified distributor data, RoHS status is 'Non-compliant (CPGA, legacy)'. For RoHS-compliant replacements, consider the plastic QFP variants of the FLEX 8000 family.
When should I choose EPF8820AGC192-2 over a modern FPGA?
Choose the EPF8820AGC192-2 only when you must preserve an existing FLEX 8000 firmware design, maintain form/fit/function for legacy through-hole sockets, or operate in a 5 V-only environment where modern sub-28 nm FPGAs are unsuitable. For all new designs, prefer Cyclone IV or Cyclone 10 devices from Intel.
Is there a drop-in replacement for EPF8820AGC192-2 in the same 192-pin CPGA?
No drop-in alternative exists in the 192-pin CPGA footprint from any major manufacturer as of 2026-09-12. The verified cross-reference data returned only generic search tools, not part-number-specific equivalents. Functional replacements exist only with PCB rework (different package). See the alternatives section for compatible-but-not-pin-compatible FLEX 8000 options.
Where do I download the EPF8820AGC192-2 datasheet PDF?
The EPF8820AGC192-2 datasheet is part of the Altera FLEX 8000 Device Family datasheet, mirrored at chipdig.com and fpgaey.com. The original Altera/Intel datasheet document number is not republished on the current Intel FPGA website because the family is obsolete; obtain it from the chipdig.com mirror linked in this page's data sources.
Where can I find the EPF8820AGC192-2 pinout?
The 192-pin CPGA pin assignment is published in the FLEX 8000 datasheet family. The CPGA pin numbering follows the standard JEDEC PGA convention with pin 1 at the index marker; consult the FLEX 8000 datasheet pin table for the EPF8820A device variant. The pinout for this part is included in the pinout array on this page.
What configuration EPROM works with EPF8820AGC192-2?
The EPF8820AGC192-2 supports in-circuit reconfigurability via Altera EPC configuration devices such as the EPC1064, EPC1213, or EPC1441, depending on configuration bitstream length. The FLEX 8000 family datasheet contains the configuration waveform and timing diagrams; select EPC size with at least 20 percent margin above the .rbf file size.
What are the key specifications of EPF8820AGC192-2 that engineers should know?
The EPF8820AGC192-2 is a FLEX 8000 family FPGA with 8,000 usable gates, 672 logic cells, 1,500 registers, 125 MHz maximum internal frequency, 5.0 ns propagation delay, 5 V VCCINT, 3.3 V/5 V tolerant I/O, 192-pin CPGA package, and SRAM-based in-circuit reconfigurable configuration. It is obsolete, non-RoHS, and currently in shortage with elevated counterfeit risk as of 2026-09-12.

کے لیے انجینئرنگ ریفرنس ڈیٹا EPF8820AGC192-2 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the EPF8820AGC192-2 when you need an exact form-fit-function replacement for a deployed FLEX 8000 design that requires the 192-pin CPGA through-hole footprint - typically military, avionics, or industrial systems designed in the 1990s-2000s where the bitstream is certified. Do not choose it for new designs: prefer Cyclone IV or Cyclone 10 devices for cost, density, and tool support. Choose EPF8820AGC192-3 instead only if you need higher fMAX and can absorb the price premium. Choose EPF8636AQC208-4 only if you can rework the PCB to accept a 208-pin PQFP - it offers lower density and is not pin-compatible. The EPF81500ARC240-3 is the upgrade path when the design overflows the EPF8820's 8K gates but still requires FLEX 8000 architecture.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ EPF8820AGC192-3 EPF8636AQC208-4 EPF8636AQC208-3 EPF8452AQC160-4 EPF81500ARC240-3
Package 192-pin CPGA 192-pin CPGA (same) 208-pin PQFP (different) 208-pin PQFP (different) 160-pin PQFP (different) 240-pin PGA (different)
Brand Intel (formerly Altera) Intel (same brand) Intel (same brand) Intel (same brand) Intel (same brand) Intel (same brand)
Usable Gates 8,000 8,000 (same die) 6,000 (-25%) 6,000 (-25%) 4,000 (-50%) 15,000 (+88%)
Speed Grade -2 -3 (faster) -4 (slower) -3 (faster) -4 (slower) -3 (faster)
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
I/O Tolerance 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V
Lifecycle Status Obsolete Obsolete Obsolete Obsolete Obsolete Obsolete
Configuration Method SRAM, ICR SRAM, ICR SRAM, ICR SRAM, ICR SRAM, ICR SRAM, ICR

اہم امتیازی خصوصیات

  • Ceramic CPGA package for high-reliability through-hole designs (بمقابلہEPF8636AQC208-4)
  • Exact 8K gate density with 1,500 registers (بمقابلہEPF8452AQC160-4)
  • Speed grade -2 versus -3 or -4 alternatives (بمقابلہEPF8820AGC192-3)

ڈیزائن نوٹس

Counterfeit risk is significant: per GlobalSpec distributor intelligence as of 2026-09-12, the EPF8820AGC192-2 has a 41 percent counterfeit threat in the open market. Always procure from authorized distributors or independent sources that provide traceability, date-code, and lot documentation. Re-marked pulls from the 1990s-2000s are common; X-ray and decapsulation inspection may be required for high-reliability applications.

The 192-pin CPGA package requires a through-hole PGA socket (e.g., 3M Textool or equivalent). Verify the socket pin numbering matches the FLEX 8000 datasheet pin table before PCB layout. The CPGA ceramic package is heavier than plastic equivalents - use mechanical support standoffs if the board is subject to vibration or shock (e.g., MIL-STD-810 environments).

FLEX 8000 I/O are 3.3 V/5 V tolerant but the VCCINT core is 5 V only. Do not interface 1.8 V or 2.5 V signals directly without level shifters. For multi-voltage buses, use external transceivers (e.g., 74LVTH245 for 3.3 V, 74HCT245 for 5 V TTL). Decouple VCCINT with 0.1 µF ceramic + 10 µF tantalum per supply pin per the FLEX 8000 datasheet decoupling recommendations.

تعمیل کی معلومات

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
No
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Ceramic CPGA package with lead-based terminations; RoHS non-compliant by virtue of package. Operating temperature grade not stated in verified data - default to commercial 0C to +70C unless otherwise specified.

ڈیٹا کی تصدیق کی تاریخ: 2026-09-12 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

EPF8820AGC192-2 EPF8820AGC192-2 datasheet FLEX 8000 FPGA 192 CPGA Altera FLEX 8000 8K gates Intel EPF8820 obsolete replacement EPF8820AGC192-2 vs EPF8820ABC225-4N FLEX 8000 192-pin CPGA buy EPF8820AGC192-2 lead time 2026 EPF8820 price stock distributor FLEX 8000 configuration EPROM EPC1064 5 V FPGA legacy replacement EPF8820AGC192-2 counterfeit risk

متعلقہ اجزاء اور اصطلاحات

Intel Altera EPF8820AGC192-2 FLEX 8000 FPGA Programmable Logic Device PLD SRAM configuration In-Circuit Reconfigurability CPGA package 192-pin PGA JEDEC PGA RoHS configuration EPROM EPC1064 EPC1441 MAX+PLUS II Quartus II industrial glue logic telecom backplane MIL-STD-1553 ARINC 429 0.42 µm CMOS 5 V tolerant I/O
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں