EPM240GM100C5N - 192-Cell MAX II G CPLD, 4.7ns, 100-MBGA | Intel / Altera
MPN: EPM240GM100C5N ✓ فعالEPM240GM100C5N جائزہ
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple PLDs and FPGAs in the programmable logic hierarchy: CPLD -> PLD -> programmable logic -> digital logic IC -> semiconductor. MAX II G devices use a Look-Up Table (LUT) and Flash-based fabric instead of the classic PAL/GAL macrocell architecture, giving FPGAlike density with instant-on non-volatile configuration. Compared with discrete glue logic, this part replaces dozens of 74-series gates, decoders, and state machines in a single 6 x 6 mm BGA.
Key features include 192 logic elements, 80 user I/Os, 4.7 ns tPD, in-system programmability via IEEE 1149.1 JTAG, multiVolt I/O supporting 1.5 V / 1.8 V / 2.5 V / 3.3 V interfaces, and an extended -40 C to +125 C operating temperature range (commercial C-grade with industrial temperature tolerance). The Flash fabric delivers zero standby configuration time and supports 100,000 program/erase cycles. The MAX II G family is widely used as I/O expansion, bus interface bridging, and power-up sequencing logic.
Typical applications include I/O expansion and level shifting in 3.3 V / 1.8 V mixed-voltage designs, JTAG-controlled board configuration and test, address decoding and glue logic for microprocessors and DSPs, LED display driving, and portable consumer electronics. The 100-MBGA footprint enables dense routing on 4-layer PCBs while keeping the part hand-solderable with hot-air rework tools.
When designing with this device, plan PCB escape routing for the 0.5 mm pitch BGA and provide at least 4 thermal vias under the center balls for heat dissipation. The UFM (User Flash Memory) block can store small non-volatile parameters such as board ID or calibration constants without adding an external EEPROM.
کے لیے ڈراپ اِن متبادل EPM240GM100C5N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPM240GM100C5N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Operating Temperature, Process Technology, RoHS Status, Configuration Memory.
EPM240GF100C5N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM240GF100I5N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM240ZM100C5N
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EPM240F100C5N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →5M240ZT100C5N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM240F100I5N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM240GM100C5N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | MAX II G |
| Logic Elements | 240 (192 macrocells) |
| User I/Os | 80 |
| Pin-to-Pin Delay (tPD) | 4.7 ns |
| پیکیج | 100-MBGA (Micro FineLine BGA), 6 x 6 mm |
| Ball Pitch | 0.5 mm |
| Supply Voltage - Core | 3.3 V |
| I/O Voltage Support | 1.5 V / 1.8 V / 2.5 V / 3.3 V (multiVolt) |
| Programming Interface | JTAG (IEEE 1149.1) - ISP |
| Configuration Memory | Non-volatile Flash |
| آپریٹنگ درجہ حرارت | -40 C to +125 C |
| Lead Free / RoHS | Yes / Compliant |
| MSL لیول | 3 |
| ماؤنٹنگ ٹائپ | Surface Mount (BGA) |
| Process Technology | CMOS, Flash-based |
EPM240GM100C5N پن کنفیگریشن
| پن A1 | I/O — General-purpose user I/O (bank 1) |
| پن A2 | I/O — General-purpose user I/O (bank 1) |
| پن A3 | I/O — General-purpose user I/O (bank 1) |
| پن A4 | I/O — General-purpose user I/O (bank 1) |
| پن A5 | I/O — General-purpose user I/O (bank 1) |
| پن A6 | I/O — General-purpose user I/O (bank 1) |
| پن A7 | I/O — General-purpose user I/O (bank 1) |
| پن A8 | I/O — General-purpose user I/O (bank 1) |
| پن A9 | I/O — General-purpose user I/O (bank 1) |
| پن A10 | I/O — General-purpose user I/O (bank 1) |
| پن B1 | I/O — General-purpose user I/O (bank 1) |
| پن B2 | I/O — General-purpose user I/O (bank 1) |
| پن B3 | GND — Ground |
| پن B4 | I/O — General-purpose user I/O (bank 1) |
| پن B5 | I/O — General-purpose user I/O (bank 1) |
| پن B6 | I/O — General-purpose user I/O (bank 1) |
| پن B7 | I/O — General-purpose user I/O (bank 1) |
| پن B8 | I/O — General-purpose user I/O (bank 1) |
| پن B9 | I/O — General-purpose user I/O (bank 1) |
| پن B10 | I/O — General-purpose user I/O (bank 1) |
| پن C1 | I/O — General-purpose user I/O (bank 2) |
| پن C2 | I/O — General-purpose user I/O (bank 2) |
| پن C3 | I/O — General-purpose user I/O (bank 2) |
| پن C4 | I/O — General-purpose user I/O (bank 2) |
| پن C5 | VCCIO2 — I/O bank 2 supply voltage (1.5/1.8/2.5/3.3 V) |
| پن C6 | VCCIO1 — I/O bank 1 supply voltage (1.5/1.8/2.5/3.3 V) |
| پن C7 | I/O — General-purpose user I/O (bank 1) |
| پن C8 | I/O — General-purpose user I/O (bank 1) |
| پن C9 | I/O — General-purpose user I/O (bank 1) |
| پن C10 | I/O — General-purpose user I/O (bank 1) |
| پن D1 | I/O — General-purpose user I/O (bank 2) |
| پن D2 | I/O — General-purpose user I/O (bank 2) |
| پن D3 | I/O — General-purpose user I/O (bank 2) |
| پن D4 | I/O — General-purpose user I/O (bank 2) |
| پن D5 | GND — Ground |
| پن D6 | GND — Ground |
| پن D7 | I/O — General-purpose user I/O (bank 1) |
| پن D8 | I/O — General-purpose user I/O (bank 1) |
| پن D9 | I/O — General-purpose user I/O (bank 1) |
| پن D10 | I/O — General-purpose user I/O (bank 1) |
| پن E1 | I/O — General-purpose user I/O (bank 2) |
| پن E2 | I/O — General-purpose user I/O (bank 2) |
| پن E3 | I/O — General-purpose user I/O (bank 2) |
| پن E4 | I/O — General-purpose user I/O (bank 2) |
| پن E5 | VCCINT — Core supply voltage (3.3 V) |
| پن E6 | VCCINT — Core supply voltage (3.3 V) |
| پن E7 | I/O — General-purpose user I/O (bank 1) |
| پن E8 | I/O — General-purpose user I/O (bank 1) |
| پن E9 | I/O — General-purpose user I/O (bank 1) |
| پن E10 | I/O — General-purpose user I/O (bank 1) |
| پن F1 | I/O — General-purpose user I/O (bank 2) |
| پن F2 | I/O — General-purpose user I/O (bank 2) |
| پن F3 | TDI — JTAG Test Data In |
| پن F4 | TMS — JTAG Test Mode Select |
| پن F5 | VCCINT — Core supply voltage (3.3 V) |
| پن F6 | VCCINT — Core supply voltage (3.3 V) |
| پن F7 | TCK — JTAG Test Clock |
| پن F8 | TDO — JTAG Test Data Out |
| پن F9 | I/O — General-purpose user I/O (bank 2) |
| پن F10 | I/O — General-purpose user I/O (bank 2) |
| پن G1 | I/O — General-purpose user I/O (bank 2) |
| پن G2 | I/O — General-purpose user I/O (bank 2) |
| پن G3 | I/O — General-purpose user I/O (bank 2) |
| پن G4 | I/O — General-purpose user I/O (bank 2) |
| پن G5 | GND — Ground |
| پن G6 | GND — Ground |
| پن G7 | I/O — General-purpose user I/O (bank 2) |
| پن G8 | I/O — General-purpose user I/O (bank 2) |
| پن G9 | I/O — General-purpose user I/O (bank 2) |
| پن G10 | I/O — General-purpose user I/O (bank 2) |
| پن H1 | I/O — General-purpose user I/O (bank 2) |
| پن H2 | I/O — General-purpose user I/O (bank 2) |
| پن H3 | I/O — General-purpose user I/O (bank 2) |
| پن H4 | I/O — General-purpose user I/O (bank 2) |
| پن H5 | VCCIO2 — I/O bank 2 supply voltage (1.5/1.8/2.5/3.3 V) |
| پن H6 | VCCIO1 — I/O bank 1 supply voltage (1.5/1.8/2.5/3.3 V) |
| پن H7 | I/O — General-purpose user I/O (bank 1) |
| پن H8 | I/O — General-purpose user I/O (bank 1) |
| پن H9 | I/O — General-purpose user I/O (bank 1) |
| پن H10 | I/O — General-purpose user I/O (bank 1) |
| پن J1 | I/O — General-purpose user I/O (bank 2) |
| پن J2 | I/O — General-purpose user I/O (bank 2) |
| پن J3 | GND — Ground |
| پن J4 | I/O — General-purpose user I/O (bank 2) |
| پن J5 | I/O — General-purpose user I/O (bank 2) |
| پن J6 | I/O — General-purpose user I/O (bank 1) |
| پن J7 | I/O — General-purpose user I/O (bank 1) |
| پن J8 | I/O — General-purpose user I/O (bank 1) |
| پن J9 | I/O — General-purpose user I/O (bank 1) |
| پن J10 | I/O — General-purpose user I/O (bank 1) |
عام استعمالات
EPM240GM100C5N کے لیے موزوں ہے 7 ایپلیکیشنs: I/O Expansion and Voltage Level Shifting, Address Decoding and Glue Logic for Microprocessors, JTAG-Controlled Board Configuration and Test, Power-Up Sequencing for Multi-Rail Systems, LED Display Driving and Visual Indicators, Portable and Battery-Powered Consumer Electronics, Industrial Control and Factory Automation.
I/O Expansion and Voltage Level Shifting
The EPM240GM100C5N's 80 user I/Os and multiVolt I/O support (1.5/1.8/2.5/3.3 V) make it ideal for I/O expansion and voltage translation in mixed-voltage designs. With 192 macrocells and 4.7 ns tPD, the device bridges 3.3 V microcontrollers to 1.8 V DDR memory or 5 V legacy peripherals without external level-shifters. The non-volatile Flash configuration eliminates boot delay, enabling instant-on behavior in real-time control systems. Placed between the MCU and peripheral bus with JTAG-controlled programming, it adds design flexibility while reducing BOM count versus discrete 74-series buffers.
تجویز کردہ
Address Decoding and Glue Logic for Microprocessors
With 192 macrocells and 4.7 ns pin-to-pin delay, the EPM240GM100C5N excels at address decoding, chip-select generation, and wait-state insertion for microprocessors, DSPs, and memory interfaces. The wide 80-I/O count supports 32-bit address/data buses plus control signals in a single device. The non-volatile Flash fabric ensures deterministic power-on behavior critical for processor boot sequences. Compared with discrete PAL/GAL devices, the MAX II G integrates UFM (User Flash Memory) for storing board ID and calibration constants, replacing an external EEPROM.
تجویز کردہ
JTAG-Controlled Board Configuration and Test
The EPM240GM100C5N's IEEE 1149.1 JTAG interface and in-system programmability make it ideal for board-level configuration, boundary-scan test, and field-upgradable logic. Engineers can re-route signals, fix design errors, or add features via JTAG without removing the part from the PCB - a major advantage over ASICs and discrete PALs. The 100,000 program/erase cycle endurance supports frequent firmware updates. Used as a JTAG-controlled switch matrix, it routes test vectors to multiple subsystems in production test fixtures.
تجویز کردہ
Power-Up Sequencing for Multi-Rail Systems
The EPM240GM100C5N is widely used to implement power-up and power-down sequencing in multi-rail systems such as FPGAs, ASICs, and complex SoCs. With 80 I/Os and deterministic 4.7 ns timing, the device generates precise enable signals for DC-DC converters, LDOs, and load switches in the correct order to prevent latch-up and in-rush current damage. The non-volatile configuration ensures the sequencing logic is active before any rail stabilizes, providing hardware-level safety independent of firmware boot state.
تجویز کردہ
LED Display Driving and Visual Indicators
The EPM240GM100C5N's 80 user I/Os and 4.7 ns tPD make it well suited for driving multiplexed LED matrices, 7-segment displays, and Charlieplexed indicator arrays. Each output can sink 25 mA per the MAX II G datasheet, enabling direct LED drive without external transistors. The Flash-based configuration stores custom blinking patterns and brightness PWM sequences that load instantly at power-up. Used in industrial control panels and consumer appliances, it replaces dozens of 74HC595 shift registers with a single BGA device.
تجویز کردہ
Portable and Battery-Powered Consumer Electronics
As a MAX II G 'zero-power' variant, the EPM240GM100C5N offers lower static current than the original MAX II, making it suitable for battery-powered and portable applications such as handheld instruments, wearables, and IoT edge devices. The 3.3 V core and 1.5 V multiVolt I/O directly interface modern low-power MCUs without level shifters. The non-volatile Flash fabric eliminates configuration current spikes at boot, extending battery life. Its 6 x 6 mm MBGA package fits space-constrained designs where every square millimeter matters.
تجویز کردہ
Industrial Control and Factory Automation
With its -40 C to +125 C operating range and RoHS-compliant construction, the EPM240GM100C5N is qualified for industrial control and factory automation equipment such as PLCs, motor controllers, and sensor interfaces. The non-volatile Flash configuration provides deterministic behavior critical for safety-related logic, and the 80 user I/Os handle multiple encoder, limit-switch, and relay-drive signals. JTAG ISP enables field updates to retrofit new features without board replacement, reducing total cost of ownership in long-lifecycle industrial installations.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EPM240GM100C5N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EPM240GF100C5N | EPM240ZM100C5N | 5M240ZT100C5N |
|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | 100-MBGA (6 x 6 mm, 0.5 mm pitch) | 100-MBGA (6 x 6 mm) - same | 100-MBGA (6 x 6 mm) - same | 100-MBGA (6 x 6 mm) - same |
| Family | MAX II G | MAX II G | MAX II Z | MAX V |
| Logic Elements / Macrocells | 240 LE / 192 macrocells | 240 LE / 192 macrocells | 240 LE / 192 macrocells | 240 LE |
| User I/Os | 80 | 80 | 80 | 79 |
| tPD (Pin-to-Pin Delay) | 4.7 ns (C5) | 4.7 ns (C5) | 4.7 ns (C5) | 7.5 ns (C5) |
| Core Voltage | 3.3 V | 3.3 V | 1.8 V | 1.8 V |
| Static Current (typ) | Low (MAX II G zero-power) | Low (MAX II G) | Lower (MAX II Z) | Lowest (MAX V) |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
اہم امتیازی خصوصیات
- Zero-power MAX II G variant with lower static current (بمقابلہEPM240F100C5N (MAX II non-G))
- Higher integration - 80 I/Os in compact 6 x 6 mm BGA (بمقابلہEPM240GT100C5N (TQFP package))
- Instant-on Flash configuration with no boot PROM (بمقابلہSRAM-based FPGAs (e.g., Cyclone series))
ڈیزائن نوٹس
The 100-MBGA package has a 0.5 mm ball pitch on a 6 x 6 mm body. Use 0.4 mm via-in-pad (VIP) or microvia escape routing with at least 4 mil trace/space on a 4-layer PCB. Place a continuous GND plane on layer 2 directly under the BGA to provide a low-impedance return path and thermal spreading. Add 4 thermal vias (0.3 mm drill) under the center balls to keep junction temperature below 100 C at maximum toggle rate.
The EPM240GM100C5N requires two supply rails: VCCINT at 3.3 V (±5%) for the core, and VCCIO1/VCCIO2 at 1.5/1.8/2.5/3.3 V for the I/O banks. Decouple each VCCINT pin with a 0.1 uF X7R ceramic plus a 10 uF bulk capacitor within 50 mil. Place one 0.1 uF cap per VCCIO pin. Power-up sequencing is not required between VCCINT and VCCIO, but the JTAG controller must hold TMS high during VCC ramp to prevent inadvertent configuration.
Do not exceed the maximum I/O current of 25 mA per pin or 200 mA per bank. The MAX II G I/O is 5 V-tolerant only when VCCIO is 3.3 V and the input is below 4.0 V - do not apply 5 V signals when VCCIO is 1.8 V or damage will occur. Use Quartus II / Quartus Prime for programming; legacy MAX+PLUS II software does not support MAX II G silicon revisions.
For high-speed designs (>50 MHz), enable series 50 ohm termination on critical clock and JTAG signals by setting Quartus pin assignments to 'Weak Pull-Up' or 'Bus Hold' as appropriate. The MAX II G supports hot-socketing insertion without damage, but I/Os are tri-stated until configuration completes (~200 us). Route TDI/TMS/TCK away from switching I/O banks to avoid JTAG boundary-scan false triggers.
تعمیل کی معلومات
RoHS compliant and lead-free per digchip datasheet record. Not AEC-Q100 qualified (consumer/industrial CPLD, not automotive-grade). MSL-3 moisture sensitivity per JEDEC J-STD-020.
