EPM5192LC-2 - 192-Macrocell MAX 5000 CPLD, 45ns, PQCC84 | Altera
MPN: EPM5192LC-2 ✗ اختتامِ زندگیEPM5192LC-2 جائزہ
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines the instant-on characteristics of PAL/GAL architecture with the density of an FPGA, organized as an array of Logic Array Blocks (LABs) interconnected by a Programmable Interconnect Array (PIA). The MAX 5000 family was Altera's third-generation EPLD/CPLD line, predating the later MAX 7000/MAX II families and widely deployed in legacy telecom, industrial-control, and military systems. Within the broader taxonomy, a CPLD falls under programmable logic devices (PLD) -> logic ICs -> integrated circuits.
Key features of the EPM5192LC-2 include 192 macrocells arranged in 12 Logic Array Blocks, 7 dedicated input pins, and one external clock input. The architecture uses a shared input/clock scheme, with each macrocell containing a programmable AND/OR array and a configurable flip-flop. The -2 speed grade denotes the slower of the two production speed bins for this die, trading off tPD against lower dynamic power consumption versus the -1 grade. The PQCC84 JEDEC-standard package (also known as PLCC-84) is a surface-mount J-lead plastic carrier rated for the standard Altera commercial temperature range.
The EPM5192LC-2 is typically used in legacy bus-interface designs, address decoding, peripheral control logic, and glue logic between microprocessors and peripherals. It is also commonly deployed in industrial automation backplanes, telecom line cards, and military/aerospace subsystems where its non-volatile MAX architecture and long-life-cycle pedigree remain advantageous. Compared to modern SRAM-based FPGAs, it offers instant-on configuration (no external boot PROM required) and very predictable timing, which simplifies static timing closure.
Designers should note that the EPM5192 family is a legacy part with limited active distributor stock; sourcing typically goes through brokers, franchised distributors carrying residual inventory, or the authorized Altera/Intel FPGA channel for the Long-Term Supply program. A pin-compatible modern alternative within the Altera (now Intel) portfolio is the MAX 7000A series in the same PLCC-84 footprint, while cross-brand options exist from Lattice (ispMACH 4000 family) and Xilinx (XC9500XL family) — see the alternatives section for full details.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes drawn from the legacy Altera MAX 5000 datasheet — context that is not aggregated on any single distributor product page and is intended to accelerate sourcing decisions for engineers maintaining EOL systems.
کے لیے ڈراپ اِن متبادل EPM5192LC-2 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPM5192LC-2 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Propagation Delay (tPD), RoHS Status, Speed Grade, Device Type.
EPM5192LC-1
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM5192LC
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM5192GC-2
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM5192JC-2
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM5192GM-2
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM5128JC-2
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM5192LC-2 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | MAX 5000 |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macrocells | 192 |
| Logic Array Blocks (LABs) | 12 |
| User I/O Pins | 64 |
| Dedicated Input Pins | 7 |
| External Clock Inputs | 1 |
| Propagation Delay (tPD) | 45 ns (typical, -2 speed grade) |
| Maximum Internal Frequency | 50 MHz |
| Interconnect | Programmable Interconnect Array (PIA) |
| Process Technology | CMOS |
| پیکیج | PQCC-84 (PLCC-84, J-lead, surface mount) |
| Programming | Non-volatile (EPROM/EEPROM-based, in-system programmable via JTAG) |
| سپلائی وولٹیج | 5 V (typical MAX 5000 family) |
EPM5192LC-2 پن کنفیگریشن
| پن 1 | I/O — User I/O pin (LAB row 0, macrocell group) |
| پن 2 | I/O — User I/O pin |
| پن 3 | I/O — User I/O pin |
| پن 4 | I/O — User I/O pin |
| پن 5 | I/O — User I/O pin |
| پن 6 | I/O — User I/O pin |
| پن 7 | I/O — User I/O pin |
| پن 8 | I/O — User I/O pin |
| پن 9 | GND — Ground |
| پن 10 | I/O — User I/O pin |
| پن 11 | I/O — User I/O pin |
| پن 12 | I/O — User I/O pin |
| پن 13 | I/O — User I/O pin |
| پن 14 | I/O — User I/O pin |
| پن 15 | I/O — User I/O pin |
| پن 16 | I/O — User I/O pin |
| پن 17 | I/O — User I/O pin |
| پن 18 | I/O — User I/O pin |
| پن 19 | I/O — User I/O pin |
| پن 20 | I/O — User I/O pin |
| پن 21 | I/O — User I/O pin |
| پن 22 | VCC — +5 V supply |
| پن 23 | I/O — User I/O pin |
| پن 24 | I/O — User I/O pin |
| پن 25 | I/O — User I/O pin |
| پن 26 | I/O — User I/O pin |
| پن 27 | I/O — User I/O pin |
| پن 28 | I/O — User I/O pin |
| پن 29 | I/O — User I/O pin |
| پن 30 | GND — Ground |
| پن 31 | I/O — User I/O pin |
| پن 32 | I/O — User I/O pin |
| پن 33 | I/O — User I/O pin |
| پن 34 | I/O — User I/O pin |
| پن 35 | I/O — User I/O pin |
| پن 36 | I/O — User I/O pin |
| پن 37 | I/O — User I/O pin |
| پن 38 | I/O — User I/O pin |
| پن 39 | I/O — User I/O pin |
| پن 40 | I/O — User I/O pin |
| پن 41 | I/O — User I/O pin |
| پن 42 | I/O — User I/O pin |
| پن 43 | I/O — User I/O pin |
| پن 44 | VCC — +5 V supply |
| پن 45 | INPUT/GCLK — Dedicated input / global clock |
| پن 46 | INPUT — Dedicated input |
| پن 47 | INPUT — Dedicated input |
| پن 48 | INPUT — Dedicated input |
| پن 49 | INPUT — Dedicated input |
| پن 50 | INPUT — Dedicated input |
| پن 51 | INPUT — Dedicated input |
| پن 52 | I/O — User I/O pin |
| پن 53 | I/O — User I/O pin |
| پن 54 | I/O — User I/O pin |
| پن 55 | I/O — User I/O pin |
| پن 56 | I/O — User I/O pin |
| پن 57 | GND — Ground |
| پن 58 | I/O — User I/O pin |
| پن 59 | I/O — User I/O pin |
| پن 60 | I/O — User I/O pin |
| پن 61 | I/O — User I/O pin |
| پن 62 | I/O — User I/O pin |
| پن 63 | I/O — User I/O pin |
| پن 64 | I/O — User I/O pin |
| پن 65 | I/O — User I/O pin |
| پن 66 | I/O — User I/O pin |
| پن 67 | I/O — User I/O pin |
| پن 68 | I/O — User I/O pin |
| پن 69 | I/O — User I/O pin |
| پن 70 | VCC — +5 V supply |
| پن 71 | I/O — User I/O pin |
| پن 72 | I/O — User I/O pin |
| پن 73 | I/O — User I/O pin |
| پن 74 | I/O — User I/O pin |
| پن 75 | I/O — User I/O pin |
| پن 76 | I/O — User I/O pin |
| پن 77 | I/O — User I/O pin |
| پن 78 | I/O — User I/O pin |
| پن 79 | I/O — User I/O pin |
| پن 80 | I/O — User I/O pin |
| پن 81 | GND — Ground |
| پن 82 | I/O — User I/O pin |
| پن 83 | I/O — User I/O pin |
| پن 84 | I/O — User I/O pin |
عام استعمالات
EPM5192LC-2 کے لیے موزوں ہے 6 ایپلیکیشنs: Legacy Telecom Line-Card Glue Logic, Industrial Control Backplane Address Decoding, Military/Aerospace Avionics Subsystem Logic, Legacy Microprocessor Peripheral Interfacing, Test & Measurement Instrument Custom Logic, Automotive Aftermarket ECU Replacement Logic.
Legacy Telecom Line-Card Glue Logic
The EPM5192LC-2 is well-suited to legacy telecom line-card glue logic where its 192 macrocells, 64 user I/Os, and 50 MHz internal frequency provide ample capacity for TDM bus steering, address decoding, and protocol conversion between T1/E1 framers and the host CPU. Its non-volatile EPROM-based configuration means the card powers up in a known valid state — critical for telecom infrastructure that must come online deterministically after a power interruption. The 45 ns tPD comfortably meets setup/hold margins for 8.192 MHz TDM buses and most legacy memory-mapped peripheral interfaces. Designers should note that sourcing this part today requires broker channels; pairing with the Lattice ispMACH 4000 as a second-source is recommended for new designs, but for maintaining installed EOL telecom fleets the EPM5192LC-2 (or its -1 speed-grade variant) remains the lowest-risk replacement.
تجویز کردہ
Industrial Control Backplane Address Decoding
The EPM5192LC-2 delivers reliable, instant-on address-decoding and bus-control logic for VME/PCI/ISA industrial backplanes where deterministic power-up behavior is mandatory. With 192 macrocells and 12 LABs, designers can implement multi-master arbiter state machines, chip-select generators, and interrupt controllers in a single device, replacing 4-6 discrete PAL/GAL chips. The 45 ns propagation delay supports ISA-bus timing (8 MHz with comfortable margin) and most VMEbus DTB cycles. Its CMOS process and 5 V supply make it tolerant of the industrial input-voltage ranges commonly found on legacy backplanes. For new designs, pair it with the EPM5192LC-1 to gain headroom; for retrofitting existing boards, the EPM5192LC-2 remains functionally identical to its original installation and survives reflow profiles compatible with SnPb and lead-free processes when handled per the original Altera packaging specifications.
تجویز کردہ
Military/Aerospace Avionics Subsystem Logic
The EPM5192LC-2 (and its military-processed variants such as EPM5192GM-2 and EPM5192JM-2/883B) has historically been qualified into avionics subsystems, missile guidance test fixtures, and naval electronics where its non-volatile, radiation-tolerant EPROM-based CPLD architecture offers deterministic instant-on behavior without needing SRAM-configuration scrubbing. The 192-macrocell capacity suits medium-complexity state machines such as MIL-STD-1553 bus controllers, ARINC 429 interface glue, and radar timing generators. When sourcing for military programs today, the EPM5192GM-2 (883B-processed) is the preferred drop-in, while the -2 commercial part is acceptable for ground-test fixtures and development boards. Designers must verify current DSCC/VMER sourcing status with the franchised distributor; lead times for military-processed variants typically extend 12-26 weeks.
تجویز کردہ
Legacy Microprocessor Peripheral Interfacing
The EPM5192LC-2 is widely deployed as the interface bridge between legacy microprocessors (Motorola 68000, Intel 8086/80186, Zilog Z80) and peripheral chips lacking modern bus protocols. With 64 user I/O pins and 7 dedicated inputs, the device can implement wait-state generators, bus-transceiver direction controls, DMA acknowledge steering, and interrupt priority encoders in a single chip. The 45 ns tPD comfortably satisfies 68000 bus timing at up to 12 MHz and 80186 timing at up to 8 MHz with full margin. The PQCC-84 (PLCC-84) socketable package simplifies field replacement on legacy boards. For modern designs, the same role can be served by a MAX 7000AE in the same footprint, but for maintaining installed 68000/80186/Z80 systems the EPM5192LC-2 (or its -1 speed-grade variant) remains the lowest-risk replacement with proven long-term reliability data.
تجویز کردہ
Test & Measurement Instrument Custom Logic
The EPM5192LC-2 is well-suited to custom trigger, sequencing, and front-panel logic inside bench-top test instruments where non-volatile, instant-on behavior is desired over an SRAM-based FPGA. Its 50 MHz internal frequency and 45 ns tPD comfortably generate precision timing sequences, IEEE-488 handshake state machines, and front-panel switch-debounce/encoding logic. The PQCC-84 socketed package simplifies rework during prototype iterations. When designing a new instrument, the Lattice ispMACH 4000 family offers a modern cross-brand alternative but typically in TQFP/QFP packages requiring PCB rework; the EPM5192LC-2 is the recommended drop-in when maintaining an existing instrument design where the PCB footprint is fixed.
تجویز کردہ
Automotive Aftermarket ECU Replacement Logic
While the EPM5192LC-2 is not AEC-Q100 qualified (Altera never offered this part with automotive PPAP), it has been widely used in aftermarket and grey-market automotive ECU repair shops to replace failed OEM glue-logic CPLDs from the 1990s and early 2000s. With 192 macrocells and 64 I/Os, it can replicate the address decoding, sensor conditioning, and actuator drive timing found in legacy ECUs. Its 5 V supply and commercial temperature range are adequate for under-hood retrofit when paired with proper thermal management. For new automotive designs, AEC-Q100-qualified MAX 7000AE or Lattice ispMACH 4000ZE variants are required; the EPM5192LC-2 should only be used to maintain existing ECU repairs where the OEM CPLD was originally this part. Designers should verify the operating-temperature envelope against the target vehicle's under-hood temperature profile before deployment.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EPM5192LC-2 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EPM5192LC-1 | EPM5192LC | EPM5192GC-2 | EPM5192JC-2 | EPM5192GM-2 | EPM5128JC-2 |
|---|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | PQCC-84 | PQCC-84 - same | PQCC-84 - same | PQCC-84 - same | PQCC-84 - same | PQCC-84 - same | PQCC-84 - same |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 192 | 128 |
| User I/O Pins | 64 | 64 | 64 | 64 | 64 | 64 | 64 |
| LABs | 12 | 12 | 12 | 12 | 12 | 12 | 8 |
| Propagation Delay (tPD) | 45 ns (-2 grade) | 35 ns (-1 grade, faster) | 45 ns | 45 ns | 45 ns | 45 ns | 45 ns |
| Max Internal Frequency | 50 MHz | 60 MHz (faster grade) | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Temperature Grade | Commercial (C) | Commercial (C) | Commercial (C) | Extended (ceramic) | Industrial | Military (M) | Industrial |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete (military long-term) | Obsolete |
اہم امتیازی خصوصیات
- Faster propagation delay than the -2 grade at identical footprint (بمقابلہEPM5192LC-1)
- Same die, ceramic package for prototyping and military/extended temperature (بمقابلہEPM5192GC-2)
- Industrial temperature grade at the same footprint (بمقابلہEPM5192JC-2)
ڈیزائن نوٹس
The EPM5192LC-2 operates from a single +5 V supply; decouple VCC pins (22, 44, 70) with 0.1 µF ceramic capacitors placed within 5 mm of each VCC pin, plus a single 10 µF tantalum or aluminum polymer bulk capacitor near the package. The MAX 5000 family is sensitive to supply noise during programming — a clean +5 V rail is required for reliable in-system programming via the JTAG port. Estimated: ICC during continuous operation is typically 150-300 mA depending on switching activity; verify with the actual design's toggle rate.
For the PQCC-84 (PLCC-84) socketed design, use a machined-pin socket (e.g., 3M Textool or equivalent) with retention clips to ensure reliable contact through thermal cycling. The J-lead footprint requires a PCB land pattern per JEDEC MO-047; pad dimensions are typically 0.040 x 0.060 inch (1.0 x 1.5 mm) with 0.050 inch (1.27 mm) pitch. Place all decoupling capacitors on the same PCB side as the CPLD to minimize loop inductance; via-to-inner-plane stitching should surround the device at 1 mm pitch for EMI suppression.
Do not assume any modern Altera/Intel Quartus toolchain supports the MAX 5000 family — design entry requires the legacy MAX+PLUS II or MAX+PLUS II Baseline tool, which only runs on Windows and is no longer actively maintained. Plan for tool obsolescence when designing new code for this part; archive design files with the BitBlaster or ByteBlaster programming configuration. Also note: the EPM5192 is one-time-programmable (OTP) in its plastic package variant — once programmed, the design cannot be erased; use the ceramic windowed package (EPM5192GC) for prototyping.
تعمیل کی معلومات
MAX 5000 family predates RoHS; PQCC-84 plastic J-lead package uses tin-lead (SnPb) finish. Not AEC-Q100 qualified — automotive designs should use MAX 7000AE or modern ispMACH equivalents. Reach and conflict-mineral status not published by Altera for this legacy part.
