ISL8323IB-T - Dual 60Ω SPST Analog Switch | Renesas
MPN: ISL8323IB-T ✓ فعالISL8323IB-T جائزہ
An analog switch is an integrated interface IC that routes signals between terminals with controlled impedance. A single-pole, single-throw, or SPST, switch has one conducting path when enabled and an open circuit when disabled. The ISL8323 uses two such paths in one package, making it useful when a design needs to isolate, disconnect, or select two analog signals without using mechanical relays.
The primary electrical characteristics include two switch circuits, 60 ohm on-resistance, and normally open contacts. The manufacturer datasheet information identifies maximum charge injection of 5 pC, off-state channel capacitance of 9 pF, maximum off-state leakage current of 100 pA, and crosstalk of -85 dB at 1 MHz. These parameters determine how much switching transients and signal coupling can affect sensitive downstream circuits.
The ISL8323 family supports single-supply operation, with the documented supply range extending to 12 V. Its low-voltage architecture is appropriate for battery-powered instruments, portable measurement equipment, automated test systems, and low-voltage control systems. Two separate switches can route independent control or sensor signals while sharing a common supply and ground reference.
Use the ISL8323IB-T when normally open behavior is required. The related ISL8324 provides normally closed switches, while the ISL8325 combines one normally open and one normally closed switch for SPDT-style routing. Because contact state changes the logic behavior, these family members are not automatic drop-in substitutes for an existing normally open design.
Layout should minimize trace length around the switched nodes, maintain a continuous ground reference, and keep sensitive signal paths away from noisy supply and control routes. Confirm the control levels, input voltage range, break-before-make behavior, and application leakage budget against the manufacturer datasheet before production release.
This product page combines the switch configuration, electrical limits, package information, family distinctions, and application guidance needed to evaluate the ISL8323IB-T and identify a valid replacement without relying on packaging suffix changes alone.
کے لیے ڈراپ اِن متبادل ISL8323IB-T — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ISL8323IB-T (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Switch Configuration.
ISL8323IB
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ISL8323IBZ-T
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ISL8323IB-T زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Number of Switch Circuits | 2 circuits |
| Switch Configuration | 2 independent normally open SPST switches |
| On-Resistance | 60 ohm |
| Maximum Charge Injection | 5 pC |
| Off-State Channel Capacitance | 9 pF |
| Maximum Off-State Leakage Current | 100 pA |
| Crosstalk | -85 dB at 1 MHz |
| Maximum Supply Voltage | 12 V |
| آپریٹنگ درجہ حرارت | -40°C to +85°C |
| پیکیج | 8-SOIC, 3.90 mm width |
| ماؤنٹنگ ٹائپ | Surface mount |
| Supply Type | Single supply |
| Switch Type | SPST, 1:1 |
| Contact State | Normally open |
| Product Family | ISL8323 low-voltage analog switch series |
ISL8323IB-T 8-soic, 3.90 mm width پن کنفیگریشن گائیڈ
ISL8323IB-T (8-soic, 3.90 mm width پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ISL8323IB-T.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ISL8323IB-T کے لیے موزوں ہے 6 ایپلیکیشنs: Portable Measurement Instrumentation, Battery-Powered Sensor Interfaces, Automated Test Equipment Signal Routing, Low-Voltage Control Signal Multiplexing, Precision Analog Signal Isolation, Industrial Data Acquisition.
Portable Measurement Instrumentation
The ISL8323IB-T fits portable measurement equipment that must route or disconnect two low-level analog signals while operating from a single supply. Its two normally open SPST paths provide independent isolation, and the 60 ohm on-resistance keeps insertion loss manageable for many sensor-conditioning stages. The 5 pC maximum charge injection is especially relevant when the switch drives a high-impedance amplifier input. Place the device close to the protected sensor node, use short traces, and verify that switching transients remain below the measurement uncertainty.
تجویز کردہ
Battery-Powered Sensor Interfaces
The ISL8323IB-T can isolate two sensor signals in battery-operated equipment where a single low-voltage supply is required. Its normally open contacts remain disconnected until enabled, helping prevent unwanted loading or signal coupling between channels. The maximum off-state leakage of 100 pA is useful for high-source-impedance sensing, while the 9 pF off-state capacitance contributes to input loading. Engineers should account for both values when setting source impedance, settling time, and the available power budget.
تجویز کردہ
Automated Test Equipment Signal Routing
The ISL8323IB-T supports two independently switched analog paths in automated test systems where a fixture must connect, isolate, or route DUT signals. A 60 ohm on-resistance is practical for many low-frequency and moderate-impedance test paths. For high-impedance nodes, however, the 5 pC charge-injection limit requires careful timing around switch commands. The 8-SOIC package also allows routing away from a connector-heavy edge region while preserving a conventional surface-mount assembly process.
تجویز کردہ
Low-Voltage Control Signal Multiplexing
The two normally open switches in the ISL8323IB-T can select or disconnect separate control signals in a low-voltage embedded control subsystem. With a documented operating range extending to 12 V, the device suits systems using a single supply rather than split positive and negative rails. Its -85 dB crosstalk at 1 MHz indicates strong isolation between channels at that test frequency. Verify actual signal bandwidth and logic thresholds because those application conditions are not fully characterized by the crosstalk point alone.
تجویز کردہ
Precision Analog Signal Isolation
The ISL8323IB-T is appropriate for isolating one analog signal while routing another in precision front ends. Its normally open behavior provides a defined disconnected state, and the 100 pA maximum off-state leakage limits leakage from high-impedance sources. The 5 pC charge injection must still be included in the settling-time analysis after each control transition. Use a nearby reference return path and avoid long, parallel switched-node traces to minimize capacitive pickup and maintain isolation performance.
تجویز کردہ
Industrial Data Acquisition
The ISL8323IB-T can route two inputs in compact industrial data-acquisition equipment where the analog front end must support channel selection or galvanic-style functional isolation within a single-supply architecture. Its -40°C to +85°C operating-temperature range supports industrial environments when the complete assembly meets its own thermal requirements. The 60 ohm on-resistance should be included in the input-buffer design, and the 9 pF off-state capacitance should be checked against required settling time and bandwidth.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ISL8323IB-T — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ISL8323IB | ISL8323IBZ-T |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 8-SOIC | 8-SOIC | 8-SOIC |
| Switch Circuits | 2 circuits | 2 circuits | 2 circuits |
| Switch Configuration | 1:1 SPST, normally open | 1:1 SPST, normally open | 1:1 SPST, normally open |
| On-Resistance | 60 ohm | 60 ohm | 60 ohm |
| Maximum Charge Injection | 5 pC | 5 pC | 5 pC |
| Off-State Channel Capacitance | 9 pF | 9 pF | 9 pF |
| Maximum Off-State Leakage Current | 100 pA | 100 pA | 100 pA |
| Crosstalk | -85 dB at 1 MHz | -85 dB at 1 MHz | -85 dB at 1 MHz |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
اہم امتیازی خصوصیات
- Two independent normally open analog paths in one package (بمقابلہISL8323IB)
- Low charge injection for precision signal isolation (بمقابلہISL8323IBZ-T)
- Documented channel isolation (بمقابلہISL8323IB)
ڈیزائن نوٹس
Treat the switched nodes as sensitive analog signals. The documented 9 pF off-state capacitance can create settling transients, while 5 pC maximum charge injection can disturb a high-impedance receiver when a control input changes. Keep input and output impedance values realistic, allow adequate settling time after switching, and verify the complete source-switch-load network with an oscilloscope before fixing acquisition timing.
Place the ISL8323IB-T close to the two switched signal paths and use the manufacturer 8-SOIC footprint. Keep input and output traces short and avoid routing them beneath noisy digital or switching-supply traces. Connect the device ground to the quiet analog ground reference with a low-impedance path, and keep the enable or control traces away from high-impedance switched nodes to reduce coupled transitions.
Do not treat the ISL8324 or ISL8325 as automatic replacements: their normally closed or mixed contact states change the circuit logic. Also verify that the on-resistance of 60 ohm is acceptable for the source and load, and that the 100 pA off-state leakage is below the measurement error budget. Confirm the exact ordering suffix, grade, package marking, and control polarity before production procurement.
تعمیل کی معلومات
The target MPN is a general-purpose analog switch rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated for this exact orderable MPN.