STMicroelectronics

LM258YDT - Dual 1.1 MHz Op Amp, 8-SOIC | STMicroelectronics

MPN: LM258YDT ✓ فعال
100 dB Vdss 20 nA Id 8-SOIC Package Internally frequency compensated Speed
MOQ: 1 |

LM258YDT جائزہ

The STMicroelectronics LM258YDT is a dual, internally frequency-compensated operational amplifier with two amplifier circuits, 100 dB DC voltage gain, 1.1 MHz unity-gain bandwidth, and 0.6 V/us slew rate in an 8-pin SOIC package. Designed for general-purpose signal amplification, the LM258YDT supports low-power applications requiring two amplifiers in one package.

An operational amplifier is an analog semiconductor that uses high open-loop gain to amplify voltage differences. Its broader hierarchy is operational amplifier, analog amplifier, linear integrated circuit, and semiconductor. Internally frequency-compensated devices simplify closed-loop design because they do not require an external compensation network for common gain configurations. The LM258 family is therefore useful when designers need stable voltage gain with fewer external components.

The principal published characteristics include a large DC voltage gain of 100 dB, a unity-gain bandwidth of 1.1 MHz, and low input bias current of 20 nA. Its low-power architecture provides very low supply current per amplifier, essentially independent of supply voltage according to the manufacturer datasheet. The two independent amplifier channels can implement separate gain stages, buffers, comparators, or active-filter sections within one package.

The internally compensated architecture provides stable operation in voltage-follower and non-inverting configurations. A 1.1 MHz unity-gain bandwidth makes the device suitable for audio-frequency signal conditioning, sensor interfaces, and low-frequency control loops. Input bias current of 20 nA helps limit bias-current error when the source impedance is high, while the 0.6 V/us slew rate supports changing waveforms without excessive distortion.

Typical uses include audio preamplification, low-voltage sensor conditioning, active filtering, industrial instrumentation, and general-purpose buffering. Because the package contains two amplifiers, it can reduce board area where two independent analog functions are required. Common-mode range, output swing, supply limits, input offset voltage, and exact channel behavior must be checked against the manufacturer datasheet before final circuit release.

Design the PCB with short feedback paths, stable reference connections, and decoupling capacitors placed close to the supply pins. Confirm output swing and input common-mode limits for the selected supply voltage. Verify noise, offset, and stability requirements with the closed-loop gain and source impedance used in the finished circuit.

This page combines the published LM258YDT characteristics with package details, application guidance, comparison information, and drop-in replacement considerations. It is designed to help engineers identify whether the LM258YDT matches a dual-amplifier requirement before moving to detailed schematic review and qualification.

کے لیے ڈراپ اِن متبادل LM258YDT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM258YDT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Input Bias Current, Slew Rate.

STMicroelectronics
Package: 8-pin SOIC
موازنہ کریں LM258YDT →
STMicroelectronics
Package: SOIC-8 (SO-8)
Input Bias Current: 45 nA (typical)
Slew Rate: 0.6 V/µs
موازنہ کریں LM258YDT →

LM258DT

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
STMicroelectronics
📦 8-SOIC
Dual low-power operational amplifier · 2 amplifiers · 2 circuits · 3 V to 30 V · 1.1 MHz · 0.6 V/us · 100 dB · 500 uA

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM258ADT

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-SOIC
Same LM258 family and 8-SOIC footprint; ordering grade differs, with the primary 1.1 MHz bandwidth and 0.6 V/us slew-rate ratings unchanged (0% change).

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM258AYDT

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-SOIC
Same LM258 family, automotive ordering option, and 8-SOIC footprint; grade-specific offset and temperature details may differ, while 1.1 MHz bandwidth is unchanged (0% change).

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM358DT

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
STMicroelectronics
📦 8-SOIC
2 · 3 V to 32 V · ±1.5 V to ±16 V · 350 µA (typical) · 2 mV (typical) · 45 nA (typical) · 1.1 MHz · 0.6 V/µs

✗ اسٹاک سے باہر

$0.0509 / یونٹ

ڈیٹا شیٹ دیکھیں →

LM358YDT

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-SOIC
Automotive-oriented LM358 ordering option in the same 8-SOIC footprint; nominal bandwidth is 1.0 MHz versus 1.1 MHz, approximately 9% lower, and slew rate is 0.5 V/us versus 0.6 V/us, approximately 17% lower.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM258YDT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Dual operational amplifier
Number of Amplifier Circuits 2 circuits
DC Voltage Gain 100 dB
Unity-Gain Bandwidth 1.1 MHz
Slew Rate 0.6 V/us
Input Bias Current 20 nA
Frequency Compensation Internally frequency compensated
Supply Current Per Amplifier Very low and essentially independent of supply voltage
Automotive Grade Yes
پیکیج 8-SOIC
ماؤنٹنگ ٹائپ Surface mount
پنز کی تعداد 8 pins

LM258YDT 8-soic پن کنفیگریشن گائیڈ

LM258YDT (8-soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

LM258YDT کے لیے 8-soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LM258YDT.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LM258YDT کے لیے موزوں ہے 6 ایپلیکیشنs: Audio Preamplifier, Industrial Sensor Conditioning, Active Filtering, Voltage Buffer, Motor and Control Signal Conditioning, Portable Instrumentation.

🎧

Audio Preamplifier

The LM258YDT fits dual-channel audio preamplification because its 1.1 MHz unity-gain bandwidth and 0.6 V/us slew rate support audio-frequency waveforms while the two channels can handle left and right signals independently. Its internally compensated architecture simplifies the gain stage and reduces the need for external compensation components. The 100 dB DC voltage gain provides ample open-loop gain for closed-loop audio amplification. Designers should still confirm output swing against the selected supply voltage and evaluate distortion and noise against the manufacturer datasheet limits.

🏭

Industrial Sensor Conditioning

The LM258YDT is suitable for conditioning low-bandwidth industrial sensor signals when the source impedance is high and input bias current matters. Its published input bias current of 20 nA helps minimize bias-induced error, while the dual package can amplify or buffer two related channels. The 1.1 MHz unity-gain bandwidth covers many process-control and instrumentation signals. Verify the sensor output range against the LM258YDT common-mode and supply limits, and check the automotive temperature qualification required by the target installation.

🔧

Active Filtering

The LM258YDT can implement active low-pass, high-pass, or notch-filter sections because the internally compensated dual amplifier provides two signal-processing channels in one 8-SOIC package. A 1.1 MHz unity-gain bandwidth supports filter designs well above conventional audio baseband frequencies, while 100 dB DC gain helps reduce closed-loop gain error. Component tolerances and amplifier stability requirements must be considered for higher-Q filters. Confirm the datasheet gain-bandwidth, noise, and output-swing curves against the selected filter topology.

⚡

Voltage Buffer

The LM258YDT works well as a dual voltage buffer when a higher-impedance source must drive a downstream measurement or control stage. Internally frequency compensation supports unity-gain voltage-follower use without an external compensation network, and the 0.6 V/us slew rate limits large-signal behavior during rapid input transitions. Both channels can buffer complementary control signals in a compact 8-SOIC footprint. Validate the source and sink current capabilities, output swing, capacitive-load stability, and input common-mode range for the actual operating conditions.

🚗

Motor and Control Signal Conditioning

The LM258YDT can condition low-frequency position, current, or feedback signals in industrial and automotive control systems. Its 100 dB DC gain is useful when a control-loop amplifier needs high closed-loop accuracy, while the 1.1 MHz unity-gain bandwidth can accommodate feedback signals with moderate frequency content. The dual configuration can process command and feedback channels independently. Because switching nodes and motor returns can create large transients, use careful grounding, isolation, filtering, and common-mode analysis before connecting the amplifier.

📱

Portable Instrumentation

The LM258YDT is appropriate for compact, low-power instrumentation because it combines two amplifier channels in an 8-SOIC package and is specified as having very low supply current per amplifier, essentially independent of supply voltage. The 20 nA input bias current is favorable for high-impedance probes, and the 1.1 MHz bandwidth supports measurements beyond the slowest DC regime. A portable design should still examine supply range, shutdown strategy, quiescent current, temperature rise, and battery-voltage variation before selecting operating points and passive components.

تجویز کردہ پروڈکٹس کا خلاصہ

What is the LM258YDT?
The LM258YDT is an STMicroelectronics dual operational amplifier with two amplifier circuits, 100 dB DC voltage gain, and a 1.1 MHz unity-gain bandwidth in an 8-SOIC package. According to the manufacturer datasheet, it is internally frequency compensated, allowing common closed-loop configurations without an external compensation network. The device is intended for general-purpose low-power signal amplification and buffer applications.
What are the key specifications of LM258YDT that engineers should know?
The LM258YDT combines two amplifier channels, 100 dB DC voltage gain, 1.1 MHz unity-gain bandwidth, 0.6 V/us slew rate, and 20 nA input bias current in an 8-SOIC package. According to the manufacturer datasheet, it is internally frequency compensated and has very low supply current per amplifier, essentially independent of supply voltage. These parameters position it for low-power audio, instrumentation, buffering, and sensor-conditioning circuits.
Where can I download the LM258YDT datasheet PDF?
The LM258YDT datasheet documentation is available through the listed LM258YDT datasheet PDF page, which identifies the component as a low-power dual operational amplifier. Use the manufacturer pin-description and electrical-characteristics tables when defining connections, supply limits, and design margins. The document provides the authoritative basis for common-mode range, output swing, offset, current, and compensation details.
Where can I find the LM258YDT pinout?
The LM258YDT uses an 8-SOIC footprint, and its pin assignments should be taken from the manufacturer datasheet pin configuration. Confirm amplifier inputs, outputs, supply connections, and package orientation directly against that diagram before laying out a PCB. The SOIC footprint is also the basis for evaluating the listed drop-in alternatives.
Is the LM258YDT suitable for audio applications?
Yes, the LM258YDT is suitable for many low-frequency audio stages because it provides 1.1 MHz unity-gain bandwidth and 0.6 V/us slew rate in a dual package. According to the manufacturer datasheet, the two channels can support preamplifier, mixer, or buffer functions. Check output swing and supply-voltage limits in the target circuit to preserve waveform headroom.
What is the input bias current of LM258YDT?
The LM258YDT has a published input bias current of 20 nA according to the manufacturer datasheet. This low value helps reduce bias-induced output error when driving a high-impedance source, particularly in sensor and instrumentation circuits. Actual error also depends on source resistance, temperature, input offset voltage, and the selected feedback network, so evaluate those parameters together.
What is the unity-gain bandwidth of LM258YDT?
The LM258YDT has a unity-gain bandwidth of 1.1 MHz according to the manufacturer datasheet. This defines the approximate bandwidth available when configured as a voltage follower with unity closed-loop gain. It also sets a practical ceiling for useful closed-loop response because higher closed-loop gains generally reduce bandwidth.
Does the LM258YDT require an external compensation capacitor?
No, the LM258YDT is internally frequency compensated for common amplifier configurations. The manufacturer datasheet identifies internal frequency compensation as a defining feature, reducing the number of external components required for stable gain stages. Designers should still use the datasheet stability guidance when unusual noise gain, load capacitance, or feedback layouts are involved.
How does LM258YDT compare with LM358DT?
The LM358DT is the closest same-manufacturer general-purpose dual-op-amp comparison because it also uses an 8-SOIC package, but the LM258YDT is the automotive-grade LM258-family option. The LM258YDT is published at 1.1 MHz unity-gain bandwidth and 0.6 V/us slew rate, while LM358-family ratings should be confirmed separately before substitution. Verify pinout, supply range, common-mode range, and temperature grade in the manufacturer datasheet.
LM258YDT vs LM258DT - which is better for automotive use?
The LM258YDT is generally the appropriate choice when an automotive-grade LM258 configuration is required, because the product listing identifies it as automotive grade. LM258DT represents the related non-Y ordering option, while both families are associated with the 8-SOIC footprint. Confirm the exact temperature range, qualification status, and shipment format before releasing a production BOM.
When should I choose LM258YDT over another dual op amp?
Choose the LM258YDT when the design needs two internally compensated amplifiers in an 8-SOIC package and values a published 1.1 MHz bandwidth, 100 dB DC gain, and automotive-grade designation. It is less suitable when the circuit requires rail-to-rail output, wider supply voltage, lower offset, or substantially faster slew rate. Choose those features first, then confirm pin compatibility.
Is the LM258YDT suitable for industrial sensor conditioning?
The LM258YDT can suit industrial sensor-conditioning designs that operate within its supply, common-mode, and output-swing limits. Its 20 nA input bias current and 1.1 MHz unity-gain bandwidth are useful for high-impedance sensors and moderate-bandwidth filtering. The manufacturer datasheet should be used to confirm operating temperature, common-mode range, offset, and noise behavior for the selected production grade.
What can replace the LM258YDT?
The LM258DT is the most direct same-manufacturer replacement candidate because it belongs to the same dual general-purpose amplifier family and uses an 8-SOIC package. LM258ADT and LM258AYDT are related ordering options, while LM358DT is a broader same-manufacturer alternative whose electrical ratings require separate verification. The LM358YDT adds an automotive-oriented ordering option. Confirm pinout and all operating limits before substitution.
Is LM258YDT the same as LM358YDT?
The LM258YDT and LM358YDT are related STMicroelectronics dual general-purpose operational amplifiers with an 8-SOIC package, but they belong to different device families and should not be assumed electrically identical. The LM258YDT is published at 1.1 MHz unity-gain bandwidth, 0.6 V/us slew rate, 100 dB DC gain, and 20 nA input bias current. Check the LM358YDT datasheet for differences in offset, output swing, supply range, and stability.
Where can I buy LM258YDT online and what is the lead time?
Use the Request a Quote form on this page to request LM258YDT pricing, current availability, lead time, and shipment details. The part is identified as an 8-SOIC, dual general-purpose operational amplifier from STMicroelectronics, with a 1.1 MHz unity-gain bandwidth. The quote desk can confirm the exact order code, package quantity, and supply status for your production requirements.
What is the price and stock status of LM258YDT?
Current LM258YDT price and stock should be requested through the Request a Quote form on this page. The component is an STMicroelectronics dual operational amplifier in an 8-SOIC package, and the quote response should confirm the exact suffix, standard reel quantity, and available quantity. No static price should be used for planning because commercial terms and inventory can change.
What are the best practices for decoupling and PCB layout with LM258YDT?
Place the supply bypass capacitor close to the LM258YDT supply pins, keep the feedback loop compact, and route inputs and outputs away from noisy switching paths. The manufacturer datasheet identifies the LM258YDT as an internally compensated, low-power dual amplifier, but normal grounding and decoupling practices remain essential. Confirm polarity and pin numbering against the package drawing before manufacturing.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM258YDT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the LM258YDT when the design needs two internally compensated general-purpose amplifiers in an 8-SOIC package, with published 100 dB DC gain, 1.1 MHz unity-gain bandwidth, 0.6 V/us slew rate, 20 nA input bias current, and an automotive-oriented ordering option. LM258DT is the direct non-automotive ordering choice when that grade is preferable. LM258ADT and LM258AYDT are related family options that require grade-specific offset and temperature review. LM358DT and LM358YDT are reasonable broader-family alternatives when slightly lower bandwidth and slew rate are acceptable, but pinout, common-mode range, output swing, offset, and temperature requirements must be confirmed before substitution.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM258DT LM258ADT LM258AYDT LM358DT LM358YDT
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Amplifier Channels 2 2 2 2 2 2
Frequency Compensation Internal Internal Internal Internal Internal Internal
Automotive Ordering Option Yes No Y ordering designation No Y ordering designation Yes No Y ordering designation Yes
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

اہم امتیازی خصوصیات

  • Combines two amplifier channels with automotive-oriented ordering (بمقابلہLM258DT)
  • Higher nominal bandwidth than the LM358 alternatives (بمقابلہLM358DT)
  • Faster nominal slew rate than the LM358 alternatives (بمقابلہLM358YDT)

ڈیزائن نوٹس

Place the supply bypass capacitor immediately adjacent to the LM258YDT supply pins and provide a low-impedance return path to the device ground. Keep input and output traces short, particularly around high-gain feedback loops, and avoid routing sensitive inputs beneath digital or switching nodes. Confirm the physical pin-1 orientation and SOIC land pattern against the manufacturer package drawing before layout release.

Keep the LM258YDT feedback components close to the amplifier pins and minimize the feedback-loop area to reduce susceptibility to parasitic capacitance and noise pickup. The device is internally frequency compensated for common configurations, but unusually high noise gain, large capacitive loads, or long feedback traces can still affect stability. Use the manufacturer stability and capacitive-load guidance when the operating conditions differ from the standard test setup.

Check the selected supply voltage against the LM258YDT operating range and verify that every signal remains within the usable input common-mode range. Also confirm output swing at the intended load because a low-power amplifier can approach its output limits before reaching the nominal supply rail. Decoupling capacitance, stability, and maximum output current should be evaluated together rather than treated as independent constraints.

Do not assume that every LM358-family ordering option is an automatic substitute for the LM258YDT. Although related devices can share an 8-SOIC footprint, DC offset, input bias current, common-mode range, output swing, temperature grade, and automotive qualification can differ. Compare the manufacturer datasheet for every production substitution and perform stability, offset, output-swing, and thermal checks on the assembled board.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The product listing identifies the LM258YDT as automotive grade. Formal RoHS, REACH, AEC-Q100 qualification, lead-free, halogen-free, and conflict-minerals statements are not established by the available component documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

lm258 datasheet lm258 datasheet pdf LM258YDT datasheet LM258YDT pinout LM258YDT 8-SOIC LM258YDT 1.1 MHz LM258YDT 0.6 V/us LM258YDT automotive op amp LM258YDT vs LM358DT LM258YDT drop-in replacement LM258YDT equivalent STMicroelectronics LM258YDT LM258YDT price LM258YDT stock LM258YDT application circuit

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics LM258YDT LM258DT LM258ADT LM258AYDT LM358DT LM358YDT dual operational amplifier analog amplifier operational amplifier linear integrated circuit semiconductor low-dropout voltage DC voltage gain unity-gain bandwidth slew rate input bias current frequency compensation 8-SOIC SOIC package family surface-mount technology SMD automotive electronics sensor conditioning active filtering
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں