Texas Instruments

LM2902KDBRE4 - Quad 26V 1.2MHz Op Amp | Texas Instruments

MPN: LM2902KDBRE4 ✓ فعال
26 V Vdss 2 nA Id 14-pin SSOP Package Internal Speed
MOQ: 1 |

LM2902KDBRE4 جائزہ

The Texas Instruments LM2902KDBRE4 is a four-circuit general-purpose operational amplifier with a 26 V maximum supply rating, 1.2 MHz gain-bandwidth product, and a 2 mV maximum input offset voltage. The device is supplied in a 14-pin SSOP package configured for tape-and-reel handling. It combines four independent amplifiers with internal frequency compensation, making it suitable for general analog signal conditioning, voltage buffering, amplification, and feedback-controlled applications.

An operational amplifier, commonly called an op amp, is a high-gain differential-input amplifier whose external feedback network determines its closed-loop behavior. Within the broader semiconductor hierarchy, an op amp is a linear integrated circuit used for voltage amplification, current-to-voltage conversion, filtering, comparison, and buffering. The LM2902 combines four such amplifier channels in one package, reducing board area compared with four separately packaged devices.

The principal characteristics include operation from dual supplies of up to ±13 V, a 26 V total supply rating, a 1.2 MHz gain-bandwidth product, and input offset voltage specified at 2 mV for the LM2902 product family. A typical input offset voltage of 3 mV and typical input offset current of 2 nA are also identified. The common-mode input range includes ground, allowing direct sensing near the lower supply rail, while the low input bias and offset parameters support precision low-frequency signal conditioning.

Each channel uses internal frequency compensation, removing the need for an external compensation capacitor in ordinary closed-loop configurations. The design includes ESD protection characterized as less than 500 V using the MIL-STD-883 Method 3015 procedure and greater than 200 V using the machine model. The manufacturer also identifies the LM2902 as qualified for automotive applications under AEC-Q100, with customer-specific configuration control and major-change approval support.

Typical uses include sensor-signal conditioning, transducer amplification, analog control loops, audio preamplification, bridge-balancing networks, and low-frequency active filters. Four integrated channels can reduce component count in designs requiring several matched general-purpose amplifier functions. Common-mode input voltage that includes ground makes the device useful in circuits powered from positive-only supplies where the signal approaches zero volts.

Design with adequate supply bypass capacitance and route input and output traces to minimize parasitic coupling. Confirm common-mode, output-swing, and input-bias requirements against the load and supply conditions. Because a linear amplifier dissipates power proportional to supply voltage and output current, thermal analysis remains important when driving low-impedance loads or operating at elevated ambient temperature.

This product page combines manufacturer specifications, package and ordering information, verified source links, application guidance, and practical replacement considerations. It supports faster component evaluation while directing engineers to the manufacturer datasheet for final pin assignments, limiting values, test conditions, and qualification details.

کے لیے ڈراپ اِن متبادل LM2902KDBRE4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM2902KDBRE4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Amplifier Type, Package.

Texas Instruments
Amplifier Type: General-purpose operational amplifier
Package: 14-pin SOIC (D), 3.90 mm width
موازنہ کریں LM2902KDBRE4 →

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

LM2902KDBRE4 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifier Channels 4 circuits
Maximum Total Supply Voltage 26 V
Maximum Dual Supply Voltage ±13 V
Gain-Bandwidth Product 1.2 MHz
Maximum Input Offset Voltage 2 mV
Typical Input Offset Voltage 3 mV
Typical Input Offset Current 2 nA
Typical Supply Current 0.8 mA
Common-Mode Input Voltage Includes ground
Frequency Compensation Internal
پیکیج 14-pin SSOP
Packaging Tape and reel
ESD Protection, MIL-STD-883 Method 3015 <500 V
Machine-Model ESD Protection >200 V at 200 pF
Automotive Qualification AEC-Q100 qualified
Configuration Control Customer-specific support with major-change approval

LM2902KDBRE4 14-pin ssop پن کنفیگریشن گائیڈ

LM2902KDBRE4 (14-pin ssop پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

LM2902KDBRE4 کے لیے 14-pin ssop پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LM2902KDBRE4.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LM2902KDBRE4 کے لیے موزوں ہے 6 ایپلیکیشنs: Sensor Signal Conditioning, Industrial Control Loops, Audio Preamplification, Active Filtering, Data Acquisition Front End, Automotive Low-Speed Control.

🧩

Sensor Signal Conditioning

The LM2902KDBRE4 fits low-frequency sensor-conditioning circuits requiring four amplifier channels in one 14-pin SSOP package. Its common-mode input range includes ground, making it useful when the sensor output approaches zero volts, while the typical 2 nA input offset current helps reduce bias-related errors with high-impedance sources. Four internally compensated channels can support buffering, gain stages, active filtering, and output conditioning without requiring four separate packages. The designer should verify sensor output range and bandwidth against the device’s 1.2 MHz gain-bandwidth product, then confirm that the 26 V maximum total supply accommodates every transient and supply configuration.

🏭

Industrial Control Loops

The LM2902KDBRE4 is appropriate for general industrial feedback and control loops that operate below its 1.2 MHz bandwidth limit. Four channels can implement error amplification, actuator conditioning, current sensing, and feedback paths within a compact board area. The maximum total supply rating of 26 V accommodates common industrial signal-chain voltages, and internal frequency compensation simplifies ordinary closed-loop implementation. Designers should still check output current, output swing, settling behavior, and common-mode range against the controller and load. Robust grounding, supply bypassing, and isolation from switching nodes are necessary to prevent induced noise from appearing directly in the control signal.

🎧

Audio Preamplification

The LM2902KDBRE4 can serve as a general-purpose preamplifier in low-frequency audio and instrumentation paths that do not require rail-to-rail operation. Its four amplifier channels allow two channels to process stereo signals while the remaining channels support gain, summing, or buffering functions. Internal frequency compensation removes the need for external compensation capacitors in conventional closed-loop stages, and the 26 V total supply limit permits operation from ±13 V supplies. Audio performance depends on output swing into the selected load, noise behavior at the signal bandwidth, and layout cleanliness. The circuit should use short, shielded input routes and a stable return path to minimize hum and interference.

🔧

Active Filtering

The LM2902KDBRE4 is suitable for first-order and modest higher-order active filters built around general-purpose closed-loop amplifier stages. Four channels provide flexibility for cascaded low-pass, high-pass, notch, or buffering sections, while internal frequency compensation supports stable operation at practical gains. Its 1.2 MHz gain-bandwidth product limits the usable signal range and should be compared with the filter’s corner frequency and required closed-loop gain. Precision passive components and stable references become increasingly important as the filter response tightens. Confirm the actual input and output signal levels so neither amplifier saturates, and test the completed board for oscillation and sensitivity to load capacitance.

📺

Data Acquisition Front End

The LM2902KDBRE4 can condition low-frequency inputs in a data-acquisition front end when the required bandwidth and precision fall within the LM2902 performance class. Four channels allow independent amplification and buffering for multiple sensors or a multiplexed measurement chain. The common-mode input range including ground supports circuits that measure signals near the lower rail, while the 2 mV maximum input offset specification is important for small-signal measurements. For higher-resolution systems, verify input offset drift, input bias behavior, noise density, and common-mode rejection at the actual operating frequency. Add input protection and reference grounding carefully so protection leakage does not dominate the sensor signal.

🚗

Automotive Low-Speed Control

The LM2902KDBRE4 supports low-speed signal-processing functions in automotive electronics because its documentation identifies the LM2902 family as AEC-Q100 qualified. Four internally compensated amplifier channels can handle sensor interfaces, actuator drivers, and feedback networks within a 26 V maximum total supply environment. Automotive qualification does not remove the need for application-level validation, so engineers should review transient immunity, temperature limits, EMC performance, and the exact ordering-code configuration. Production procurement should apply customer-specific configuration-control and major-change-approval procedures where supported. Keep sensitive input routes away from high-current loads and vehicle power domains to minimize coupled noise.

What is the LM2902KDBRE4?
The LM2902KDBRE4 is a Texas Instruments quad general-purpose operational amplifier in a 14-pin SSOP package. It provides four internally frequency-compensated amplifier channels, a 26 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and a maximum input offset voltage of 2 mV. According to the Texas Instruments LM2902 product page, it is intended for general-purpose analog signal conditioning and amplification.
What is the supply voltage range of LM2902KDBRE4?
The LM2902KDBRE4 is rated for a maximum total supply voltage of 26 V, equivalent to operation from dual supplies up to ±13 V. Texas Instruments describes the device as a quad, 26 V operational amplifier. The exact minimum supply voltage and complete operating limits are defined in the manufacturer datasheet and should be checked against the intended rail arrangement.
What are the key specifications of LM2902KDBRE4 that engineers should know?
The key specifications of LM2902KDBRE4 are four amplifier channels, a 26 V maximum supply, 1.2 MHz gain-bandwidth product, 2 mV maximum input offset voltage, and internal frequency compensation. The 14-pin SSOP package also supports four general-purpose analog channels in a relatively compact footprint. These characteristics make the device suitable for standard closed-loop amplifier configurations.
Where can I download the LM2902KDBRE4 datasheet PDF?
The LM2902KDBRE4 datasheet can be downloaded through the Texas Instruments LM2902 product page or the linked manufacturer-hosted datasheet resources. The product documentation covers the LM2902 family, including ordering information, electrical characteristics, pin configuration, and application guidance. Use the manufacturer document for the authoritative pin descriptions and test conditions associated with this ordering code.
Where can I find the LM2902KDBRE4 pinout?
The LM2902KDBRE4 pinout is documented in the Texas Instruments LM2902 family datasheet under the pin-configuration and ordering-information sections. The device is specified in a 14-pin SSOP package. Assign PCB connections using the package drawing and pin table from the manufacturer datasheet rather than relying solely on a generic SSOP diagram.
What can replace LM2902KDBRE4?
A drop-in replacement for LM2902KDBRE4 must use the same 14-pin SSOP footprint, preserve pin functions, and meet the original supply-voltage, input-offset, bandwidth, and common-mode requirements. The cross-reference results confirm that other LM2902 order codes exist, but they do not establish five pin-compatible alternatives in the same package. Request a replacement review through the Request a Quote form on this page with the required electrical and package constraints.
Is LM2902KDBRE4 the same as LM2902KDBRG4?
No. LM2902KDBRE4 is ordered in a 14-pin SSOP package, while LM2902KDBRG4 uses a different package order code. The cross-reference listing notes similar family characteristics, but a different package requires different PCB land patterns and solder geometry. LM2902KDBRG4 is therefore not a direct drop-in substitute for LM2902KDBRE4 without a board-layout change.
LM2902KDBRE4 vs LM2902KDBRG4: which is better for an existing PCB?
LM2902KDBRE4 is the correct choice for an existing 14-pin SSOP footprint, while LM2902KDBRG4 belongs to a different package option. The internal functional characteristics are related because both are LM2902-family devices, but package compatibility determines whether a replacement can be soldered without PCB changes. Use LM2902KDBRE4 when the board matches the SSOP land pattern.
When should I choose LM2902KDBRE4 over another quad op amp?
Choose LM2902KDBRE4 when a design requires four general-purpose amplifier channels, a maximum total supply of 26 V, approximately 1.2 MHz bandwidth, internal compensation, and a 14-pin SSOP footprint. It is particularly suitable for low-frequency signal conditioning, buffering, and control applications that do not require rail-to-rail inputs or outputs. Verify output-swing and common-mode limits for the actual supply voltage.
Is LM2902KDBRE4 suitable for sensor signal conditioning?
Yes, LM2902KDBRE4 is suitable for many sensor-signal-conditioning applications because it provides four channels, internal compensation, low typical input offset current of 2 nA, and a common-mode input range that includes ground. It works well for low-frequency transducer amplifiers and filters near the lower rail. Sensor excitation, output range, noise, and bandwidth must still be evaluated for the individual design.
What is the lead time for LM2902KDBRE4?
Current production lead time and available quantity should be requested through the Request a Quote form on this page. The manufacturer product page supports LM2902 family ordering and product-quality information, but a fixed lead time is not a permanent device specification. Providing the target quantity, package suffix, and required ship date enables a current sourcing response.
Where can I buy LM2902KDBRE4 online?
Use the Request a Quote form on this page to request LM2902KDBRE4 availability, current lead time, and order handling. The exact ordering code is a four-amplifier device in a 14-pin SSOP tape-and-reel package. Quote requests should include the required quantity and production dates so the current manufacturing and delivery position can be confirmed.
What is the price of LM2902KDBRE4?
The current price of LM2902KDBRE4 should be obtained through the Request a Quote form on this page because commercial terms and quantity breaks can change. The verified product listings identify the part as a Texas Instruments 14-pin SSOP device, but they do not present an extractable quantity-price table for this ordering code. Submit the required quantity and packaging information with the quote request.
Is LM2902KDBRE4 in stock?
Current LM2902KDBRE4 stock should be confirmed through the Request a Quote form on this page. Inventory status changes by order quantity and delivery date, so a static stock claim would not reliably represent current availability. Include your required quantity, production schedule, and approved manufacturer-part-number requirements in the request.
Does LM2902KDBRE4 require an external compensation capacitor?
No, the LM2902 uses internal frequency compensation for its standard general-purpose amplifier configurations. This reduces external component count and simplifies basic non-inverting, inverting, summing, and buffer circuits. Bandwidth and stability still depend on gain, load, output swing, and PCB layout, so use the manufacturer application guidance when operating near performance limits.
Is LM2902KDBRE4 qualified for automotive applications?
Yes, the manufacturer documentation identifies the LM2902 as AEC-Q100 qualified for automotive applications. It also states that customer-specific configuration control can be supported with major-change approval. Automotive production designs should still use the exact ordering code, confirm qualification conditions, and apply the manufacturer’s change-control and traceability requirements.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM2902KDBRE4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LM2902KDBRE4 when the PCB requires a 14-pin SSOP quad amplifier and the design uses the LM2902’s general-purpose performance class: 26 V maximum total supply, 1.2 MHz bandwidth, 2 mV maximum input offset, and internal frequency compensation. It is a strong fit for low-frequency sensor conditioning, industrial feedback loops, audio preamplification, active filtering, and data-acquisition front ends that do not require rail-to-rail inputs or outputs. LM2902KDBRG4 and LM2902KDR remain useful LM2902-family options when the PCB uses their respective packages, but they are not drop-in replacements for the SSOP footprint of LM2902KDBRE4. Before finalizing the choice, verify output swing, load drive, common-mode range, temperature limits, ESD expectations, and qualification requirements. For new precision or low-noise designs, confirm that the LM2902’s offset and noise performance meet the measurement budget rather than assuming that a general-purpose amplifier is suitable for every signal chain.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand Texas Instruments
Package 14-pin SSOP
Amplifier Configuration Quad general-purpose operational amplifier
Maximum Total Supply Voltage 26 V
Maximum Dual Supply Voltage ±13 V
Gain-Bandwidth Product 1.2 MHz
Maximum Input Offset Voltage 2 mV
Frequency Compensation Internal
Automotive Qualification AEC-Q100 qualified
Delivery Packaging Tape and reel

اہم امتیازی خصوصیات

  • Four integrated general-purpose amplifier channels (بمقابلہLM2902KDBRG4)
  • General-purpose 26 V supply capability (بمقابلہLM2902KDR)
  • Automotive-oriented family qualification (بمقابلہLM2902KDBRG4)

ڈیزائن نوٹس

Place the supply bypass capacitor close to the device’s power and ground pins, and keep the return path short to reduce supply impedance. The LM2902 is intended for operation up to a 26 V total supply, but correct decoupling and grounding remain necessary at every operating point. Check the selected capacitor’s DC-bias derating and temperature rating so effective capacitance remains adequate at the actual supply voltage.

Route each amplifier channel’s input and output as short and direct as practical, with a continuous return plane beneath the device. Four channels can create crosstalk if sensitive inputs run parallel to outputs or switching-node wiring. Respect the 14-pin SSOP land pattern from the manufacturer package drawing, confirm pin orientation during inspection, and avoid placing test pads or long stubs adjacent to high-impedance input nodes.

Do not interpret the 26 V rating as permission to exceed input or output limits. Verify common-mode range, output swing, load current, and stable operating gain against the actual supply. Because the common-mode input range includes ground but does not imply rail-to-rail capability, check the datasheet waveform limits before using the amplifier at the positive rail or driving loads near the output limits.

Estimated: power dissipation depends on the actual supply, output voltage, load current, and ambient temperature because the output stage can dissipate current even when the output remains below the rail. Use the manufacturer’s electrical limits and thermal information to determine the worst-case condition. Provide adequate copper area around the SSOP and avoid enclosing the device in a thermally isolated enclosure without thermal analysis.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The LM2902 documentation identifies AEC-Q100 qualification for automotive applications and states that customer-specific configuration control can be supported along with major-change approval. ESD ratings are identified as less than 500 V using MIL-STD-883 Method 3015 and greater than 200 V using the machine model at 200 pF.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LM2902KDBRE4 datasheet LM2902KDBRE4 datasheet pdf LM2902KDBRE4 pinout LM2902KDBRE4 specifications LM2902KDBRE4 equivalent LM2902KDBRE4 replacement LM2902KDBRE4 vs LM2902KDBRG4 LM2902KDBRE4 footprint LM2902KDBRE4 price LM2902KDBRE4 stock Texas Instruments LM2902KDBRE4 LM2902KDBRE4 14 pin SSOP LM2902KDBRE4 sensor signal conditioning what is LM2902KDBRE4

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM2902KDBRE4 LM2902 LM2902KDBRG4 LM2902KDR operational amplifier op amp quad amplifier linear integrated circuit semiconductor general-purpose amplifier signal conditioning gain-bandwidth product input offset voltage common-mode input voltage internal frequency compensation 14-pin SSOP SSOP package family surface-mount package AEC-Q100 MIL-STD-883 Method 3015 ESD protection automotive electronics industrial control active filter
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں