LM2903ST - Dual Low-Power Comparator, 36V | STMicroelectronics
MPN: LM2903ST ✓ فعالLM2903ST جائزہ
A voltage comparator is an analog integrated circuit that compares two input voltages and drives its output to indicate which input is higher. Comparators sit within the broader amplifier and analog signal-chain hierarchy: comparator -> amplifier IC -> analog IC -> semiconductor. Unlike operational amplifiers, comparators are designed for fast, saturated switching between output states, and the LM2903's open-collector output stage lets the output be pulled to any logic level via an external pull-up resistor, enabling interfacing between different voltage domains.
Key features of the LM2903ST include the very wide 2 V to 36 V supply range, which covers 3.3 V, 5 V, 12 V, 24 V, and industrial 36 V rails from a single device; a very low supply current of 0.4 mA that is largely independent of supply voltage (approximately 1 mW per comparator at +5 V); a low input bias current of 25 nA typical; and a low input offset current of ±5 nA typical. The common-mode input range extends to ground, allowing sensing of signals referenced to the negative rail.
Technically, the LM2903ST uses a bipolar process optimized for low quiescent power rather than speed. Its open-collector outputs can be wire-ORed, and the device is qualified and characterized for automotive use per AEC-Q100 within the LM2903 family, making it robust across industrial and vehicular temperature environments. Propagation behavior suits threshold detection, level shifting, and slow-to-medium-speed switching rather than high-speed clocking.
Typical applications include battery chargers and battery-powered instruments, industrial limit comparators and window detectors, automotive sensor threshold detection, square-wave and relaxation oscillators, and level-shifting interfaces between logic families with different supply rails.
When designing with this part, always fit an external pull-up resistor on each output (typically 3 kOhm to 15 kOhm) since the outputs are open collector; also account for input differential voltage limits at high supply rails.
This page adds value beyond the manufacturer datasheet by combining verified specifications, drop-in alternatives, practical design notes, and application guidance in a single citable reference. Request current pricing and stock through the Request a Quote form on this page.
کے لیے ڈراپ اِن متبادل LM2903ST — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM2903ST (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Output Type, Comparator Type, Input Bias Current, Supply Current.
LM2903YPT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM393
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2903BIDR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2903ST زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Number of Channels | 2 |
| Comparator Type | General purpose, open-collector output |
| Supply Voltage Range (Single) | +2 V to +36 V |
| Supply Voltage Range (Dual) | ±1 V to ±18 V |
| سپلائی کرنٹ | 0.4 mA (typical, independent of supply voltage) |
| Power per Comparator | 1 mW at +5 V |
| Input Bias Current | 25 nA (typical) |
| Input Offset Current | ±5 nA (typical) |
| Common-Mode Input Range | Extends to negative rail (ground on single supply) |
| آؤٹ پٹ کی قسم | Open collector |
| پیکیج | 8-pin MiniSO (ST suffix) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified (LM2903 family) |
| Packing | Tape and Reel |
LM2903ST پن کنفیگریشن
| پن 1 | OUT A — Comparator A output (open collector, requires pull-up resistor) |
| پن 2 | IN A- — Comparator A inverting input |
| پن 3 | IN A+ — Comparator A non-inverting input |
| پن 4 | GND / V- — Ground or negative supply |
| پن 5 | IN B+ — Comparator B non-inverting input |
| پن 6 | IN B- — Comparator B inverting input |
| پن 7 | OUT B — Comparator B output (open collector, requires pull-up resistor) |
| پن 8 | VCC / V+ — Positive supply |
عام استعمالات
LM2903ST کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Instrument Threshold Detection, Industrial Limit and Window Comparators, Automotive Sensor Threshold Monitoring, Level Shifting and Logic Interfacing, Square-Wave and Relaxation Oscillators, Zero-Crossing and Power-Supply Detection.
Battery-Powered Instrument Threshold Detection
In battery chargers, portable meters, and battery management circuits, the LM2903ST's 0.4 mA supply current keeps quiescent drain negligible on a cell-based energy budget, while the +2 V minimum supply supports operation directly from single-cell or 3.3 V rails. Each open-collector output can be pulled up to the microcontroller's logic rail, directly flagging over-voltage, under-voltage, or end-of-charge conditions without level-shifting circuitry. Because the common-mode input range extends to ground, low-side current-sense thresholds near 0 V are sensed accurately. With two channels in one 8-pin MiniSO package, over-charge and over-discharge windows are monitored by a single low-cost IC, minimizing board area and BOM cost.
تجویز کردہ
Industrial Limit and Window Comparators
Industrial 24 V control panels and process instrumentation benefit directly from the LM2903ST's +36 V single-supply maximum, which permits direct connection to 24 V rails without pre-regulation. The dual channels are ideal for window comparators that flag process variables straying outside upper and lower limits, and the wire-OR capability of the open-collector outputs lets multiple comparators share a single fault line. Input bias current of 25 nA typical means high-value divider networks sense thresholds without loading errors, and operation is stable across factory floor temperature extremes. The low 1 mW-per-comparator power at 5 V also suits always-on monitoring in energy-conscious installations.
تجویز کردہ
Automotive Sensor Threshold Monitoring
The LM2903 family is qualified and characterized according to AEC-Q100 and AEC-Q003 or equivalent, with advanced screening per AEC-Q001 and AEC-Q002, which makes the LM2903ST appropriate for vehicular threshold detection tasks such as coolant level switches, door-status sensing, seat-belt interlocks, and battery voltage supervision. The wide supply range tolerates load-dump-adjacent rail conditions when paired with upstream protection, and the open-collector output interfaces cleanly with 5 V or 12 V automotive logic via a pull-up resistor. With 25 nA typical input bias current, resistive sensor networks - thermistors, potentiometers, and float switches - are sensed without noticeable loading, preserving threshold accuracy over vehicle lifetime.
تجویز کردہ
Level Shifting and Logic Interfacing
Because each LM2903ST output is an open collector, the output high level is set by whatever rail the external pull-up resistor connects to, not by the comparator supply. This makes the device a simple, robust level shifter between analog domains and digital systems: run the comparator from a 12 V or 24 V industrial rail, pull the output up to a 3.3 V microcontroller rail, and the interface is complete with one resistor. The comparison action also cleans up slow or noisy analog transitions into crisp logic edges. With two independent channels, bidirectional or multi-domain interfaces are implemented in one MiniSO-8 footprint at minimal cost and power draw.
تجویز کردہ
Square-Wave and Relaxation Oscillators
The LM2903ST's two comparators, wide supply range, and saturated open-collector switching make it a natural fit for RC relaxation oscillators, clock sources, and tone generators used in alarm panels, indicators, and low-cost timing circuits. Configured with positive feedback and an RC network, each comparator toggles at a frequency set by the RC time constant, and the open-collector output swings cleanly between the pull-up rail and saturation, producing well-defined logic-compatible edges. The 0.4 mA supply current keeps oscillator power negligible, and the +2 V minimum supply supports battery-powered signaling. Frequency accuracy depends on RC component tolerance, so use precision passive parts where timing matters.
تجویز کردہ
Zero-Crossing and Power-Supply Detection
Power-supply supervision and AC zero-crossing detection circuits exploit the LM2903ST's ground-inclusive common-mode input range: signals referenced to 0 V, including rectified AC waveforms and low-side sense voltages, are compared directly without negative supplies. In switch-mode power supplies, one channel monitors the output rail against a reference for over/under-voltage flagging, while the second channel implements power-good or brownout detection, both in a single MiniSO-8 package. The open-collector output integrates easily with optocoupler-based isolation schemes in offline converters, and the 36 V maximum supply tolerates harsh auxiliary rail conditions commonly encountered in industrial power electronics.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LM2903ST — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | LM2903YPT | LM393 | LM2903 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | Texas Instruments | Texas Instruments |
| Package | 8-pin MiniSO | 8-pin MiniSO - same footprint | 8-pin SOIC/MiniSO variants - select matching package | 8-pin SOIC/MiniSO variants - select matching package |
| Supply Voltage (Single) | +2 V to +36 V | +2 V to +36 V | +2 V to +36 V | +2 V to +36 V |
| Supply Current | 0.4 mA typ | 0.4 mA typ | 0.4 mA typ | 0.4 mA typ |
| Input Bias Current | 25 nA typ | 25 nA typ | 25 nA typ | 25 nA typ |
| Output Type | Open collector | Open collector | Open collector | Open collector |
| Automotive Qualification | AEC-Q100 qualified family | Automotive-grade screened | Commercial grade | AEC-Q100 qualified family |
| Number of Channels | 2 | 2 | 2 | 2 |
اہم امتیازی خصوصیات
- 36 V single-supply tolerance in an 8-pin package (بمقابلہLM393 (commercial grade ordering variants))
- Ground-inclusive common-mode input range (بمقابلہLM2904)
- Ultra-low 0.4 mA supply current independent of voltage (بمقابلہLM393)
ڈیزائن نوٹس
The LM2903ST outputs are open collector - they cannot drive high on their own. Every output must have an external pull-up resistor (typically 3 kOhm to 15 kOhm) to the desired logic or supply rail. Forgetting the pull-up is the most common cause of 'comparator stuck low' failures. Also, unused comparators should have their inputs tied to defined potentials (for example, one input to ground and the other to mid-supply) to prevent undefined oscillation of the open-collector output.
For noisy or slowly moving input signals near the threshold, add hysteresis with positive feedback: connect a resistor from output to the non-inverting input (typically 100 kOhm to 1 MOhm range, sized against the source impedance) to create a few tens of millivolts of hysteresis and prevent output chatter. Note that the open-collector output's high level depends on the pull-up rail, so calculate the hysteresis window at both output states. Bypass the supply with 100 nF close to pin 8 for clean switching.
The 0.4 mA supply current is largely independent of supply voltage, so at 36 V the device dissipates roughly 14.4 mW - negligible thermally, but relevant to total battery budgets in always-on monitors. Estimated: at +5 V, per the ST datasheet, each comparator consumes about 1 mW. Account separately for pull-up resistor current when the output is low: a 3 kOhm pull-up to 5 V sinks about 1.7 mA, which usually dominates the comparator's own consumption in duty-cycled designs.
تعمیل کی معلومات
The STMicroelectronics LM2903 datasheet states the device is qualified and characterized according to AEC Q100 and Q003 or equivalent, with advanced screening according to AEC Q001 and Q002 or equivalent. RoHS/REACH status should be confirmed on the ST product page for the specific ordering code.