Texas Instruments

LM393BIDSGR - 38V Dual Open-Collector Comparator | TI

MPN: LM393BIDSGR ✓ فعال
38 V Vdss 3.5 nA Id 8-WSON (2x2 mm) Package
MOQ: 1 |

LM393BIDSGR جائزہ

The Texas Instruments LM393BIDSGR is a dual general-purpose voltage comparator with an open-collector output, packaged in an 8-WSON (2x2 mm) surface-mount package. Its headline specifications are a maximum supply rating of 38 V, an input offset voltage as low as 0.37 mV, and a supply current of 200 µA per comparator. The two comparator channels are independent, allowing each channel to monitor a separate signal while operating from one supply.

A comparator is an analog integrated circuit that compares two input voltages and changes its output state when one input crosses the other. The LM393 family belongs to the hierarchy of linear integrated circuits, voltage comparators, and general-purpose interface ICs. Its open-collector outputs can sink current from multiple downstream devices while remaining electrically isolated from the supply rail, making the device useful for wired logic, relay drivers, and open-drain bus arrangements.

The B-version LM393B improves several characteristics over the original LM393 family. Maximum supply voltage increases to 38 V, input offset voltage decreases to 0.37 mV, and input bias current decreases to 3.5 nA. The supply current is 200 µA per comparator, and dedicated ESD clamps provide a 2 kV human-body-model ESD rating with improved input ruggedness. Quiescent current remains independent of the supply voltage according to the manufacturer product page.

Each channel contains a differential input stage and an open-collector output stage. The common-mode input range and output behavior determine where the device can operate in a system, so the pin-description and electrical-characteristics tables in the Texas Instruments LM393B datasheet should be checked against the actual signal levels. Because the outputs are open collector, an external pull-up resistor is required when the output must reach a high voltage. Two pull-up resistors can also be tied together to form a wired-AND arrangement.

Typical uses include overvoltage detection, window comparison with both channels, zero-cross detection, sensor signal conditioning, and battery or power-supply supervision. The wide supply range also suits industrial control systems, while the low input bias current reduces loading on high-impedance dividers. The compact 2x2 mm WSON package supports space-constrained portable and embedded designs.

Designers should place decoupling capacitors close to the supply and ground pins, route sensitive input traces away from switching nodes, and account for the pull-up network when setting output rise times. The exposed pad and low-profile package also require attention to solder-paste layout and thermal spreading under continuous comparator activity.

This page combines the manufacturer device information with practical guidance on pin assignment, open-collector interfacing, supply bypassing, input protection, and qualified drop-in alternatives, providing engineering context beyond a basic distributor listing.

کے لیے ڈراپ اِن متبادل LM393BIDSGR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

LM393BDSGR

✅ ڈراپ-اِن
📦 8-WSON (2x2 mm)
Same LM393B family and 8-WSON land pattern; temperature-grade designation differs from the I-grade target, so confirm the operating-temperature requirement before substitution.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM2903BIDSGR

✅ ڈراپ-اِن
Texas Instruments
📦 8-WSON (2x2 mm)
Dual differential comparator · 2 channels · 38 V · -38 V to +38 V · Includes ground · 0.37 mV · 3.5 nA · 200 uA per comparator

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM393BIDGKT

✅ ڈراپ-اِن
📦 8-WSON (2x2 mm)
Same electrical device and 8-WSON pin arrangement in cut-tape presentation rather than reel presentation; component parameters are unchanged but order handling differs.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM393BIDSGR زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Comparator Type Dual general-purpose voltage comparator
Number of Channels 2 independent comparators
Maximum Supply Voltage 38 V
Input Offset Voltage 0.37 mV
Input Bias Current 3.5 nA
سپلائی کرنٹ 200 µA per comparator
ESD Rating 2 kV HBM
آؤٹ پٹ کی قسم Open-collector
Supply Type Single supply
Commercial Grade Dual commercial-grade standard comparator
پیکیج 8-WSON (2x2 mm)
ماؤنٹنگ ٹائپ Surface mount
Product Family LM393B / LM2903B dual comparator family
Input Protection Dedicated ESD clamps
Quiescent Current Behavior Independent of supply voltage

LM393BIDSGR پن کنفیگریشن

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
پن 1 OUT1 — Comparator 1 open-collector output
پن 2 IN1- — Comparator 1 inverting input
پن 3 IN1+ — Comparator 1 non-inverting input
پن 4 GND — Ground connection
پن 5 IN2+ — Comparator 2 non-inverting input
پن 6 IN2- — Comparator 2 inverting input
پن 7 OUT2 — Comparator 2 open-collector output
پن 8 VCC — Positive supply connection

عام استعمالات

LM393BIDSGR کے لیے موزوں ہے 6 ایپلیکیشنs: Power-Supply Overvoltage Detection, Battery Threshold Monitoring, Sensor Signal Conditioning, Window Comparator for Limit Detection, Relay and Solenoid Drive Interface, Zero-Cross and Edge Detection.

⚡

Power-Supply Overvoltage Detection

The LM393BIDSGR fits overvoltage supervision because one channel can compare a divided output rail against a reference and the 38 V maximum supply rating provides margin for monitored industrial sources. Its 0.37 mV input offset and 3.5 nA input bias current limit errors from high-impedance divider networks. Use the open-collector output to pull down a system fault signal through an external pull-up, adding hysteresis around the threshold to prevent repeated switching near the trip point.

🔋

Battery Threshold Monitoring

The LM393BIDSGR can monitor a battery pack by comparing a scaled cell voltage against a precision reference on each of its two independent channels. The low 3.5 nA bias current is valuable with a high-value divider, while the 200 µA-per-comparator supply current limits the load on low-energy systems. The compact 8-WSON (2x2 mm) package also leaves room for protection components in portable battery packs and energy-storage monitoring modules.

🏭

Sensor Signal Conditioning

The LM393BIDSGR works well as a front-end threshold detector for resistive, optical, or industrial sensor signals because its 3.5 nA input bias current produces minimal loading. One channel can establish a fixed threshold while the other compares the sensor against a programmable reference. With a 38 V maximum rating and dedicated 2 kV HBM input clamps, the device is suitable for industrial sensing systems where inputs are exposed to electrically noisy environments.

📊

Window Comparator for Limit Detection

Both channels of the LM393BIDSGR can be assigned to the upper and lower limits of a measurement window, making the device effective for undervoltage and overvoltage detection in a single package. Its 0.37 mV offset supports accurate threshold placement near mid-supply, and the two open-collector outputs can share a pull-up to create a fault signal. Add positive feedback to each channel as hysteresis and verify that the reference and input voltages remain within the specified common-mode range.

🔧

Relay and Solenoid Drive Interface

The open-collector output of the LM393BIDSGR can sink the base or gate current of an external transistor that drives a relay, solenoid, or motor stage. This keeps the comparator output separate from the load supply and avoids driving a high-voltage coil directly from the IC. Select the pull-up value from the required sink current, add a flyback diode for an inductive load, and use the comparator's common-mode range to verify that the sensing signal is valid during switching.

📈

Zero-Cross and Edge Detection

The LM393BIDSGR can detect when a signal crosses a reference level, supporting zero-cross, phase, or edge-detection functions in motor control and signal-conditioning circuits. Its dual-channel arrangement permits one channel to handle zero-cross detection while the other monitors a separate trip condition. The open-collector output drives a pull-up network, so the pull-up value and board capacitance set the edge rate; add hysteresis or filtering when noise near the crossing point is significant.

تجویز کردہ پروڈکٹس کا خلاصہ

LM393BDSGR Same-family dual comparator with matching 8-WSON footprint استعمال ہوتا ہے: Power-Supply Overvoltage Detection, Sensor Signal Conditioning, Relay and Solenoid Drive Interface LM2903BIDSGR Texas Instruments استعمال ہوتا ہے: Power-Supply Overvoltage Detection, Battery Threshold Monitoring, Sensor Signal Conditioning, Window Comparator for Limit Detection, Relay and Solenoid Drive Interface, Zero-Cross and Edge Detection LM393BIDGKT Same electrical function with alternate order presentation استعمال ہوتا ہے: Battery Threshold Monitoring, Window Comparator for Limit Detection, Zero-Cross and Edge Detection
What is the operating voltage range of LM393BIDSGR?
The LM393BIDSGR operates from a single supply and carries a maximum supply rating of 38 V. According to the Texas Instruments LM393B datasheet, the B version increases the maximum rating to 38 V compared with the original LM393 family. Use the common-mode input range from the electrical-characteristics table to determine how close each input can operate to the supply rails. External clamping or protection may still be required when a signal can exceed the absolute maximum rating.
What are the key specifications of LM393BIDSGR that engineers should know?
The LM393BIDSGR is a dual, open-collector comparator with a maximum supply rating of 38 V, input offset voltage of 0.37 mV, input bias current of 3.5 nA, and supply current of 200 µA per comparator. It also provides a 2 kV HBM ESD rating through dedicated input clamps. These characteristics make it appropriate for low-power sensing, threshold detection, and open-drain interfacing where input loading must remain low.
Where can I download the LM393BIDSGR datasheet PDF?
The official LM393B datasheet is available through the Texas Instruments literature link on this page. The manufacturer document covers the LM393B, LM2903B, LM193, LM293, LM393, and LM2903 families, including electrical characteristics, pin descriptions, typical applications, and package drawings. Use the device-specific package section for the 8-WSON (2x2 mm) land pattern before releasing a PCB layout.
Where can I find the LM393BIDSGR pinout?
The LM393BIDSGR pinout is published in the pin-configuration section of the Texas Instruments LM393B datasheet. The 8-WSON device contains two independent comparator channels, each with a non-inverting input, an inverting input, and an open-collector output, plus common supply and ground pins. Assign PCB tracks from the manufacturer pin table because the exposed thermal pad is not a substitute for the electrical ground connection.
Does LM393BIDSGR need a pull-up resistor on its output?
Yes, each open-collector output requires an external pull-up resistor to establish a high output level. The resistor value determines the output rise time, the available sink current, and the power dissipated when the output is low. Two output pins can share a pull-up when wired-AND behavior is acceptable. Follow the output-capacitance and sink-current limits in the manufacturer datasheet when selecting the value.
Is LM393BIDSGR pin-compatible with LM393B?
The LM393BIDSGR is a member of the LM393B family and uses the 8-WSON (2x2 mm) package identified for this ordering code. Same-package LM393B variants that preserve the terminal assignments can serve as drop-in options. Before substitution, verify the input common-mode range, supply limits, output-sink capability, temperature grade, and exposed-pad requirements in the datasheet for the exact replacement MPN.
What is the best drop-in replacement for LM393BIDSGR?
The closest drop-in replacement is an LM393B ordering code with the same 8-WSON (2x2 mm) footprint, the same pin assignments, and a compatible temperature grade. Same-package variants from the LM2903B family may also function as drop-ins because the two devices implement dual comparators with the same basic interface. Request the current availability of qualified alternatives through the Request a Quote form on this page, and validate timing and output levels before release.
What can replace LM393BIDSGR?
A device can replace LM393BIDSGR only if it preserves the 8-WSON (2x2 mm) land pattern, all eight terminal functions, open-collector output behavior, and the required electrical limits. Same-package LM393B and LM2903B family variants are the natural starting point for review. Confirm the maximum supply voltage, input common-mode range, propagation delay, input offset, and output-current ratings in each candidate datasheet rather than relying on package similarity alone.
When should I choose LM393BIDSGR instead of a CMOS comparator?
Choose LM393BIDSGR when a wide single-supply range, open-collector interface, and low 200 µA-per-comparator supply current are more important than the very low current and fast response of a CMOS comparator. Its 38 V maximum rating also exceeds the operating range of many low-voltage CMOS alternatives. The trade-off is that open-collector outputs require pull-up resistors and can respond more slowly than modern rail-to-rail CMOS comparators.
Can LM393BIDSGR be used for window monitoring?
Yes, the two independent channels of the LM393BIDSGR can monitor an upper and a lower threshold, provided both reference voltages remain inside the device's specified common-mode range. Configure the channel polarity by choosing which input is non-inverting and which is inverting, then combine the two open-collector outputs through a wired-AND pull-up network. Add input filtering and verify hysteresis separately if the monitored signal crosses the thresholds slowly.
How should I protect the inputs of LM393BIDSGR from ESD?
The LM393B has dedicated ESD clamps and a 2 kV HBM ESD rating, but that rating does not remove the need for application-level protection. Keep input traces short, place series resistors where surge current must be limited, and use external clamping networks when a protected connector can expose the inputs to voltages beyond the absolute maximum. The manufacturer input-protection and recommended-operating-condition sections define the acceptable limits.
What is the input bias current of LM393BIDSGR and why does it matter?
The LM393BIDSGR has a maximum specified input bias current of 3.5 nA in the B-version family data. Low bias current minimizes the error introduced when the comparator is driven by a high-impedance divider or sensor. The offset error caused by bias current is approximately the bias current multiplied by the source impedance, so a 10 MΩ source can still create a relevant error even with a 3.5 nA input current.
How much supply current does LM393BIDSGR consume?
The LM393BIDSGR consumes 200 µA per comparator, or approximately 400 µA for both channels under the conditions described in the family data. The manufacturer product page states that quiescent current is independent of supply voltage. Because open-collector outputs draw no supply current while low when no pull-up current is present, the load connected to the output can dominate the total system consumption.
Is LM393BIDSGR suitable for industrial control systems?
The LM393BIDSGR is suitable for many industrial control tasks because it operates from a single supply with a 38 V maximum rating and provides 2 kV HBM input protection. The industrial ordering designation identifies its intended temperature grade, but the exact operating range should be confirmed for the specific MPN. For safety-critical or automotive systems, check the qualification requirements separately rather than assuming general-purpose compliance.
Where can I buy LM393BIDSGR online?
Use the Request a Quote form on this page to request LM393BIDSGR pricing, current stock, and a shipment commitment from XAIPART. The form is the appropriate route for a formal purchase because component availability and commercial terms can change by day and quantity. For technical acceptance, download the LM393B datasheet and confirm the 8-WSON (2x2 mm) footprint and pin mapping before releasing the order.
What is the lead time for LM393BIDSGR?
Request the current LM393BIDSGR lead time and minimum order quantity through the Request a Quote form on this page. The manufacturer lists the device as active, but production schedules, reel quantities, and allocation can change independently of lifecycle status. For scheduled builds, request a dated supply commitment and confirm the exact 8-WSON ordering code before the purchasing deadline.
Is LM393BIDSGR in stock?
The current LM393BIDSGR inventory status should be confirmed through the Request a Quote form on this page. Stock levels change with supplier allocation, reel quantities, and order volume, so a general listing is not a reservation. Specify your required quantity, target date, and acceptable packaging method when submitting the request to obtain a firm availability response.
What is the price of LM393BIDSGR?
Current LM393BIDSGR pricing is available through the Request a Quote form on this page. Because the part is ordered by quantity and packaging configuration, a quotation gives the most reliable commercial response for production planning. Include the annual usage, order quantity, target ship date, and whether tape-and-reel presentation is required so the request can be evaluated without further clarification.
LM393BIDSGR vs LM393BDSGR - which is better for industrial designs?
LM393BIDSGR and LM393BDSGR are closely related dual-comparator options, but the ordering suffix identifies the temperature grade. The I designation on LM393BIDSGR indicates the industrial-grade option, making it the better choice when the required ambient temperature exceeds the commercial-grade range. Confirm the full operating-temperature table for the replacement MPN before treating it as a drop-in substitution.
LM393BIDSGR vs LM2903BIDSGR - which is the better replacement?
LM2903BIDSGR is the natural alternative when an industrial-grade dual comparator is required and the same 8-WSON footprint and terminal functions are preserved. Both families provide two independent comparators with open-collector outputs, but device-level differences can include offset, timing, input common-mode limits, and qualification details. Compare the exact electrical-characteristics tables before selecting the substitute for a new design.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM393BIDSGR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LM393BIDSGR when your design needs a dual, open-collector comparator with a 38 V maximum supply rating, low 3.5 nA input bias current, and a compact 8-WSON (2x2 mm) footprint. It is a strong fit for industrial threshold detection, battery supervision, window comparison, and open-drain fault signaling where the input signal may approach the practical common-mode limits of the device. Choose LM393BDSGR when the commercial temperature grade is sufficient and the same electrical family is preferred. Consider LM2903BIDSGR when a related dual-comparator family meets your timing and common-mode requirements, after comparing its electrical table against the target. Choose LM393BIDGKT when the same electrical device is needed in cut-tape order presentation. For any substitution, verify pin functions, maximum supply voltage, common-mode range, offset, propagation delay, output sink current, and exposed-pad layout before release.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM393BDSGR LM2903BIDSGR LM393BIDGKT
Package 8-WSON (2x2 mm) 8-WSON (2x2 mm) 8-WSON (2x2 mm) 8-WSON (2x2 mm)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Comparator Type Dual general-purpose voltage comparator Dual general-purpose voltage comparator Dual voltage comparator Dual general-purpose voltage comparator
Maximum Supply Voltage 38 V 38 V 38 V 38 V
Output Type Open-collector Open-collector Open-collector Open-collector
Number of Channels 2 2 2 2

اہم امتیازی خصوصیات

  • B-version input accuracy supports tighter threshold detection (بمقابلہLM393BDSGR)
  • Low input loading preserves high-impedance sensor signals (بمقابلہLM2903BIDSGR)
  • Compact 2x2 mm package preserves board area (بمقابلہLM393BIDGKT)

ڈیزائن نوٹس

Place the supply-decoupling capacitor and the two ground connections as close to the device as the 8-WSON (2x2 mm) land pattern permits. Route the non-inverting and inverting inputs as matched, short traces, and keep them away from switching-node copper. The exposed pad must be tied to the ground plane and connected with multiple thermal-vias where the PCB design rules permit, because heat from the device and both output channels is removed through that pad.

Add external pull-up resistors to both open-collector outputs unless another device on the board already provides the required pull-up network. Size the resistor for the available sink current and the required rise time; a smaller value produces a faster edge but increases low-state current. Place the pull-up resistor close to the output node when long traces are involved. The pull-up voltage must remain within the absolute maximum rating of every connected device.

Do not assume the two comparator inputs can swing across the complete supply range. Check the specified common-mode range for the operating supply, and use a resistor divider or level shift when a sensor output can exceed it. The 2 kV HBM ESD rating adds input ruggedness but does not authorize operation beyond absolute maximum conditions. Also avoid connecting an open-collector output to a supply directly without confirming that the pull-up voltage and output leakage are acceptable.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The device is a general-purpose industrial-grade comparator. A 2 kV HBM ESD rating is specified, but AEC-Q100 automotive qualification and material-compliance declarations are not established by the cited device information.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LM393BIDSGR LM393BIDSGR datasheet LM393BIDSGR datasheet pdf LM393BIDSGR pinout LM393BIDSGR equivalent LM393BIDSGR replacement LM393BIDSGR cross reference LM393BIDSGR vs LM2903BIDSGR LM393BIDSGR footprint LM393BIDSGR 38V comparator LM393BIDSGR open collector output Texas Instruments LM393BIDSGR LM393BIDSGR price LM393BIDSGR stock 8-WSON dual comparator drop-in replacement

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM393BIDSGR LM393B LM2903B LM393BDSGR LM2903BIDSGR LM393BIDGKT dual comparator voltage comparator analog integrated circuit general-purpose comparator open-collector output wired-AND input offset voltage input bias current quiescent current common-mode input range propagation delay ESD protection 2 kV HBM ESD single power supply 8-WSON 2x2 mm package surface mount industrial control
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں