Texas Instruments

PCM3006TG - 16-Bit Stereo Audio Codec | Texas Instruments

MPN: PCM3006TG ✓ فعال
24-pin SSOP/TSSOP-24 Package
MOQ: 1 |

PCM3006TG جائزہ

Texas Instruments PCM3006TG is a 16-bit stereo audio codec that combines analog-to-digital and digital-to-analog conversion in one IC. It uses single-ended analog voltage input and output and is offered in a 24-pin SSOP/TSSOP-24 surface-mount package. The device is positioned as a low-cost integrated codec for equipment that requires compact conversion of stereo audio signals.

An audio codec is an interface IC that converts between analog audio and digital audio data. Its internal ADC accepts analog voltage signals, converts them into digital samples, and transfers those samples to a digital audio processor through a digital serial interface. The internal DAC performs the reverse path, accepting digital audio data and producing a single-ended analog output. This integrated ADC/DAC arrangement reduces component count and simplifies mixed-signal board layouts compared with separate converter ICs.

The PCM3006TG's principal identified characteristics are 16-bit resolution, stereo operation, single-ended analog input and output, and a 24-pin package. These features make the codec applicable to consumer audio equipment, digital recording products, and embedded audio systems where two audio channels must cross the analog-to-digital boundary. Its integrated conversion functions also allow a design to use the same codec for playback, capture, or bidirectional signal conversion when the surrounding system provides suitable clocks and digital interfaces.

The PCM3006 family is described by Texas Instruments as a low-cost, single-chip stereo audio codec. Integrating both conversion directions into one package reduces board area and the number of external conversion devices. The digital side must still be connected to a processor, controller, or audio transport capable of supporting the codec's interface format and required clocking. Analog board design also requires careful grounding and layout control to prevent converter noise from coupling into either the input or output signal path.

Typical uses include compact stereo playback and recording modules, multimedia appliances, USB or network audio peripherals, industrial control panels with sound capture, and consumer products with local audio output. The 16-bit format provides a defined sample width for digital audio pipelines, while the stereo architecture supports independent or paired left and right channels according to the system configuration.

Designers should follow the pin-description and typical-application circuits in the Texas Instruments PCM3006 datasheet when assigning signals. Place analog and digital return paths carefully, provide local bypassing at the supply pins, and route high-speed digital traces away from sensitive analog inputs. Confirm the required master-clock, serial-data, and control connections before finalizing the PCB footprint.

This product page combines the confirmed PCM3006TG characteristics with a searchable compatibility comparison and practical implementation guidance. It is intended to help engineers identify the correct codec, understand its documented architecture, and plan a robust analog and mixed-signal layout before release to manufacturing.

کے لیے ڈراپ اِن متبادل PCM3006TG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PCM3006TG (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Analog Input Type, Analog Output Type, Conversion Functions, Package, Product Type.

Texas Instruments
Analog Input Type: Single-ended
Analog Output Type: Single-ended
Conversion Functions: Stereo ADC and stereo DAC
موازنہ کریں PCM3006TG →

PCM3006T

✅ ڈراپ-اِن
Texas Instruments
📦 TSSOP-24
Stereo audio codec IC · 16 bit · Stereo, 2 channels · Stereo ADC and stereo DAC · Single-ended · Single-ended · Delta-sigma modulation · 64 times

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PCM3006TG تفصیلات

Product Type Stereo audio codec
ADC/DAC Resolution 16 bit
Audio Channel Configuration Stereo
Analog Input Type Single-ended voltage input
Analog Output Type Single-ended voltage output
Conversion Functions Integrated ADC and DAC
Device Category Interface IC
پیکیج 24-pin SSOP/TSSOP-24
ماؤنٹنگ ٹائپ Surface mount
Manufacturer Texas Instruments

PCM3006TG 24-pin ssop/tssop-24 پن کنفیگریشن گائیڈ

PCM3006TG (24-pin ssop/tssop-24 پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

PCM3006TG کے لیے 24-pin ssop/tssop-24 پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PCM3006TG.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

PCM3006TG کے لیے موزوں ہے 6 ایپلیکیشنs: Stereo Digital Recording, Compact Audio Playback Module, USB Audio Peripheral, Network Audio Terminal, Industrial Sound Monitor, Consumer Multimedia Appliance.

🎧

Stereo Digital Recording

PCM3006TG fits compact stereo recording because its 16-bit ADC accepts single-ended analog voltage inputs and converts two audio channels into digital data. Place the codec near the input connector and analog conditioning network so the signal reaches the ADC through a short, controlled path. Provide the required master clock and serial interface from the recording processor, and use the datasheet's analog and digital grounding arrangement to limit converter noise in captured audio.

🔊

Compact Audio Playback Module

The integrated 16-bit DAC and single-ended analog output of PCM3006TG support compact stereo playback modules without requiring separate ADC and DAC packages. A digital audio source can send decoded data to the codec, while the analog outputs feed the next amplification or output stage. Confirm the required data format and clocking in the Texas Instruments PCM3006 datasheet, and keep the analog output routing short to reduce susceptibility to board noise and coupling.

🖥️

USB Audio Peripheral

PCM3006TG can serve as the analog conversion section of a USB audio peripheral when the USB controller or digital audio interface supplies compatible clock and serial data. Its stereo ADC supports two-channel capture, while its stereo DAC supports two-channel playback through single-ended outputs. The main design constraints are clock-domain support, supported sample rates, digital signal integrity, and a clean analog return path; each must be verified against the exact system requirements and manufacturer datasheet.

🌐

Network Audio Terminal

A network audio terminal can use PCM3006TG for local two-channel capture and playback after network audio data has been decoded by a suitable processor. The 16-bit stereo codec provides a unified conversion device, reducing board area compared with separate converters. Because network audio endpoints may operate at several clock rates, the design must validate every required sample rate and clock arrangement rather than assuming continuous-mode or slave-mode support. Analog filtering and grounding also affect perceived channel balance.

🏭

Industrial Sound Monitor

PCM3006TG is suitable for an industrial sound-monitoring module that acquires two analog channels and presents them to a digital controller. Its 16-bit ADC provides the conversion path, while the integrated DAC can support monitoring or test-signal playback when the system design requires it. Keep sensor and transducer inputs away from digital switching nodes, use stable references and suitable input conditioning, and verify the codec's operating limits against the industrial temperature and supply requirements.

📺

Consumer Multimedia Appliance

PCM3006TG supports playback, capture, or bidirectional audio functions in a consumer multimedia appliance where a compact stereo codec is preferred. Its integrated ADC and DAC avoid two separate converter packages, while the 16-bit resolution provides a consistent digital sample width. The audio processor must accommodate the documented serial format and clocking, and the PCB must separate analog input/output routing from processor buses and display-related switching circuitry to maintain usable audio performance.

What is PCM3006TG?
PCM3006TG is a Texas Instruments 16-bit stereo audio codec with single-ended analog input and output. According to the Texas Instruments PCM3006 datasheet, it combines an analog-to-digital converter and digital-to-analog converter in a single 24-pin SSOP/TSSOP-24 package. It is intended for compact stereo audio capture, playback, and mixed-signal products.
What are the key specifications of PCM3006TG?
The key PCM3006TG specifications are 16-bit conversion resolution, stereo audio operation, single-ended analog voltage input, and single-ended analog voltage output. Texas Instruments identifies the device as a low-cost, single-chip stereo audio codec in a 24-pin SSOP/TSSOP-24 surface-mount package. Interface format, clocking, supply range, and sample-rate details should be taken from the manufacturer datasheet.
Where can I download the PCM3006TG datasheet PDF?
The PCM3006TG datasheet can be downloaded from the Texas Instruments PCM3006 document link on this page. The document contains the authoritative pin descriptions, electrical characteristics, interface timing, clock requirements, and typical application circuits. Use the pin-description table rather than distributor summaries when assigning the 24 pins or designing a new PCB layout.
Where can I find the PCM3006TG pinout?
The PCM3006TG pinout is defined in the Texas Instruments PCM3006 datasheet, where the 24-pin SSOP/TSSOP-24 signal assignments are listed in the pin-description table. A complete numerical pin map is not reproduced on this product page. Assign supply, ground, analog, clock, data, and control nets directly from the manufacturer diagram and verify every net against the selected system configuration.
Is PCM3006TG suitable for stereo audio recording?
Yes, PCM3006TG is suitable for stereo recording because it provides a 16-bit ADC and accepts single-ended analog voltage inputs in a stereo configuration. The digital processor must supply the required clocking and receive the serial conversion data. Analog input conditioning, antialias filtering, grounding, and software gain calibration remain important parts of a practical recording design.
Can PCM3006TG provide stereo audio playback?
Yes, PCM3006TG includes a 16-bit DAC with single-ended analog voltage output, allowing it to handle stereo playback in a single IC. According to the Texas Instruments PCM3006 datasheet, the codec provides both ADC and DAC functions. A suitable audio output stage may still be required depending on the intended output impedance, power level, and external amplification topology.
What is the difference between PCM3006TG and PCM3006T?
PCM3006T is the closest identified member of the same Texas Instruments PCM3006 family, while PCM3006TG carries the target orderable suffix. The family description identifies both as low-cost, single-chip 16-bit stereo audio codecs using single-ended analog input and output in a 24-pin package. Verify suffix-specific ordering, environmental, and marking details in the manufacturer documentation before substitution.
When should I choose PCM3006TG over PCM3006T?
Choose PCM3006TG when the BOM requires that exact suffix and its ordering, marking, or environmental designation matches the finished product's requirements. PCM3006T remains the principal same-family alternative identified in the cross-reference data. Because suffix-specific requirements are not interchangeable by assumption, compare the current manufacturer ordering information and approved-component requirements before releasing either part.
Is PCM3006TG a drop-in replacement for another stereo audio codec?
PCM3006TG should not be treated as a general drop-in replacement without a pin-by-pin comparison. The confirmed closest candidate is PCM3006T from Texas Instruments, but the available cross-reference information identifies a family relationship rather than complete electrical equivalence for every competitor codec. Check package dimensions, pin functions, supply voltage, clocking, data format, and analog levels against the original datasheet.
What is the best drop-in replacement for PCM3006TG?
PCM3006T is the best-supported drop-in candidate for PCM3006TG because it is identified in the same Texas Instruments PCM3006 family and appears to use the same 24-pin device package. Only one same-family candidate was explicitly identified, and no verified cross-brand pin-compatible equivalent was established. A production substitution still requires confirmation of suffix, clock, interface, supply, and analog-performance requirements.
Is PCM3006TG the same as PCM3006T?
PCM3006TG and PCM3006T belong to the same PCM3006 codec family and share the core description of a 16-bit, single-chip stereo codec with single-ended analog input and output. Their orderable suffixes can carry different packaging, marking, or environmental requirements, so they should not be treated as identical without checking the current manufacturer part information. The PCB footprint appears reusable because both are identified with the same 24-pin package family.
What can replace PCM3006TG?
PCM3006T is the identified same-family replacement candidate for PCM3006TG, with the same 24-pin SSOP/TSSOP-24 format and the same 16-bit stereo conversion architecture. No cross-brand replacement was verified as fully pin-compatible and parametrically equivalent. For a critical design, review the manufacturer datasheets for clocking, digital data format, supply voltage, analog input/output range, and exact pin assignment.
What is the best Texas Instruments equivalent for PCM3006TG?
PCM3006T is the best-supported Texas Instruments equivalent identified for PCM3006TG because it appears in the same PCM3006 product family and uses the same 24-pin package format. The family also shares the 16-bit stereo ADC/DAC architecture and single-ended analog interface description. Final approval should include a line-by-line comparison of electrical limits, timing, clocking, and ordering suffix requirements.
How should PCM3006TG be handled in a mixed-signal PCB layout?
Route PCM3006TG analog and digital signals according to the Texas Instruments PCM3006 datasheet and typical application circuit. Keep sensitive analog inputs and outputs away from high-speed digital traces, provide local supply bypassing at the IC, and use a deliberate ground strategy for analog and digital return currents. The 24-pin SSOP/TSSOP-24 footprint also warrants careful escape routing so bypassing and analog connections are not lengthened unnecessarily.
Where can I buy PCM3006TG and what is its lead time?
Use the Request a Quote form on this page to request PCM3006TG availability, current lead time, and the appropriate order quantity. The confirmed package is Bulk with a listed minimum quantity of 120 units, but manufacturing status, allocation, and delivery timing can change. The quote team should confirm the exact suffix and shipping requirements before an order is placed.

کے لیے انجینئرنگ ریفرنس ڈیٹا PCM3006TG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose PCM3006TG when the BOM specifies that exact Texas Instruments suffix and the design needs a 16-bit stereo codec combining single-ended analog capture and playback in a 24-pin package. PCM3006T is the identified same-family option when its suffix-specific ordering, environmental, marking, or production conditions meet the product requirements and the pin configuration remains unchanged. Neither candidate should replace an unrelated codec solely because it uses a 24-pin package: verify digital interface format, clocking, supply voltage, analog input/output range, conversion performance, and exposed-pin assignments. For designs requiring features not confirmed for the PCM3006 family, such as a specified microphone preamplifier, headphone driver, digital microphone interface, or other sample rates, evaluate a codec whose datasheet explicitly provides those functions. Final sourcing and substitution approval should include a line-by-line datasheet comparison.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ PCM3006T
Product Type Stereo audio codec Stereo audio codec
Brand Texas Instruments Texas Instruments
Package 24-pin SSOP/TSSOP-24 24-pin SSOP/TSSOP-24
ADC/DAC Resolution 16 bit 16 bit
Channel Configuration Stereo Stereo
Analog Input Single-ended voltage input Single-ended voltage input
Analog Output Single-ended voltage output Single-ended voltage output

اہم امتیازی خصوصیات

  • Single-package stereo capture and playback (بمقابلہPCM3006T)
  • Single-ended analog interface alignment (بمقابلہPCM3006T)
  • Shared 24-pin package format (بمقابلہPCM3006T)

ڈیزائن نوٹس

Follow the Texas Instruments PCM3006 datasheet's typical application layout and keep analog input, analog output, and reference-related routes away from processor buses and clock signals. Use a deliberate analog and digital ground strategy at the codec, and connect return currents so they do not share a noisy path beneath the analog pins. Place input filtering and output coupling components near the associated pins or signal source to minimize pickup and board-area exposure.

Provide the supply voltage and decoupling specified by the manufacturer datasheet, with local bypass capacitors positioned close to the codec's supply and ground pins. Confirm startup, clock, and shutdown behavior in the selected operating mode. Because the package exposes analog and digital functions on one 24-pin device, stable reference and supply behavior directly affect both capture and playback quality.

Route digital clock and data traces as controlled-impedance or otherwise appropriately terminated interconnects when the connected processor requires it. Keep the digital interface away from the single-ended analog input and output nets, maintain short clock routes, and provide a continuous ground reference beneath the interface. Validate timing margins at the intended clock frequency because the codec and host controller must operate within one common timing specification.

Do not assume that all PCM3006 orderable suffixes have identical environmental, marking, or production requirements. Confirm the exact suffix, clocking mode, digital format, analog levels, and package dimensions before schematic release. For PCM3006T substitution, verify every pin and timing parameter against the Texas Instruments PCM3006 datasheet rather than relying only on the shared 24-pin package name.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Distributor snippets contain conflicting RoHS indications, so RoHS status is left unknown until confirmed through the manufacturer product page or datasheet.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

PCM3006TG datasheet PCM3006TG pinout PCM3006TG datasheet pdf PCM3006TG specifications PCM3006TG TSSOP-24 PCM3006TG 16-bit codec PCM3006TG application circuit PCM3006TG equivalent PCM3006TG replacement PCM3006TG vs PCM3006T PCM3006TG footprint PCM3006TG price PCM3006TG stock Texas Instruments PCM3006TG what is PCM3006TG

متعلقہ اجزاء اور اصطلاحات

Texas Instruments PCM3006TG PCM3006T PCM3006 stereo audio codec audio codec ADC/DAC analog-to-digital converter digital-to-analog converter 16-bit converter stereo conversion single-ended analog input single-ended analog output Interface IC TSSOP-24 SSOP-24 surface-mount package RoHS semiconductor
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں