S9S08AW60E5MFGE - 60KB Flash 8-Bit MCU 44-LQFP | NXP (Tape & Reel)
MPN: S9S08AW60E5MFGE ✓ فعالS9S08AW60E5MFGE جائزہ
An 8-bit microcontroller (MCU) is a single-chip processor integrating CPU, RAM, Flash program memory, EEPROM/Flash data, and a rich set of peripherals including timers, ADCs, communication ports, and GPIO. Positioned within the broader category hierarchy, the 8-bit MCU sits below 16-bit and 32-bit MCUs in computation throughput but excels in deterministic interrupt response, low power, low cost per unit, and simple toolchain development - characteristics that explain its enduring dominance in body, chassis, and appliance subsystems.
Key features of the S9S08AW60E5MFGE include a CISC-style S08 core with BDM (Background Debug Mode) for in-circuit debugging, on-chip 60 KB Flash program memory, multiple timers including TPM channels for PWM generation, ADC, I2C, SCI, and SPI peripherals, plus low-power run/wait/stop modes. The device supports both 3.3 V and 5 V rails, simplifying power-tree design across 3.3 V and 5 V sub-systems in one PCB.
The MC9S08AW60 family uses an enhanced HCS08 core executing most instructions in 1-2 bus cycles, plus a BDM interface for non-intrusive debug and a wide operating temperature range. Integrated peripherals include a multi-channel 10-bit ADC, multiple TIM/TPM modules, SCI, SPI, and I2C, supporting a wide variety of motor, sensor, and human-machine-interface (HMI) tasks.
Typical applications of the S9S08AW60E5MFGE include automotive body controllers, instrument clusters, HVAC control modules, industrial sensor conditioning, household appliances, white goods motor control, and low-cost HMI panels with LCD segment displays. The 44-pin LQFP package is well suited for compact PCBs and reflow assembly.
When designing with this part, plan BDM/reset pin pull-ups, place decoupling capacitors within 5 mm of VDD/VSS pairs, and reserve a dedicated 4.7 kohm pull-up on the BKGD pin for in-circuit programming. The internal Flash is rated for typical endurance of 10K cycles - sufficient for most consumer/industrial field-reprogrammable designs.
This page synthesizes distributor pricing (as of 2026-10-19), drop-in compatible alternatives from the S08/S12 family, and PCB-level design notes not found in the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل S9S08AW60E5MFGE — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں S9S08AW60E5MFGE (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Core, ADC, Program Memory, Debug Interface.
MC9S08AW60CFGE
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S08AW60CFGER
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S08AW48CFGE
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S08AW60CPUE
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S12DT128MPVE
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →S9S08AW60E5MFGE زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | HCS08 (S08 enhanced), 8-bit CISC |
| CPU Clock (Max) | 40 MHz (20 MHz bus) |
| Program Flash | 60 KB (60K x 8) |
| سپلائی وولٹیج | 3 V / 3.3 V / 5 V |
| پیکیج | 44-pin LQFP (10 x 10 mm) |
| ADC | Multi-channel 10-bit (per family) |
| Communication | SCI (UART), SPI, I2C |
| Timers | TPM modules with PWM channels |
| Debug Interface | BDM (Background Debug Mode) |
| آپریٹنگ درجہ حرارت | -40C to +125C (automotive range) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Family | S08 / MC9S08AW60 series |
| Automotive/Industrial | Dual-targeted |
| Lead Free / RoHS | Yes (per suffix "E" = Pb-free, "R" = tape & reel) |
S9S08AW60E5MFGE پن کنفیگریشن
| پن 1 | PTA0/KBIP0 — Port A bit 0 / keyboard interrupt |
| پن 2 | PTA1/KBIP1 — Port A bit 1 / keyboard interrupt |
| پن 3 | PTA2 — Port A bit 2 |
| پن 4 | PTA3 — Port A bit 3 |
| پن 5 | PTA4 — Port A bit 4 |
| پن 6 | PTA5 — Port A bit 5 |
| پن 7 | PTA6 — Port A bit 6 |
| پن 8 | PTA7 — Port A bit 7 |
| پن 9 | VREFH — ADC reference high |
| پن 10 | VREFL — ADC reference low |
| پن 11 | AVDDS — Analog supply |
| پن 12 | PTB0/AD0 — Port B bit 0 / ADC input 0 |
| پن 13 | PTB1/AD1 — Port B bit 1 / ADC input 1 |
| پن 14 | PTB2/AD2 — Port B bit 2 / ADC input 2 |
| پن 15 | PTB3/AD3 — Port B bit 3 / ADC input 3 |
| پن 16 | PTB4/AD4 — Port B bit 4 / ADC input 4 |
| پن 17 | PTB5/AD5 — Port B bit 5 / ADC input 5 |
| پن 18 | PTB6/AD6 — Port B bit 6 / ADC input 6 |
| پن 19 | PTB7/AD7 — Port B bit 7 / ADC input 7 |
| پن 20 | PTC0 — Port C bit 0 |
| پن 21 | PTC1 — Port C bit 1 |
| پن 22 | PTC2 — Port C bit 2 |
| پن 23 | PTC3 — Port C bit 3 |
| پن 24 | PTC4 — Port C bit 4 |
| پن 25 | PTC5 — Port C bit 5 |
| پن 26 | PTC6 — Port C bit 6 |
| پن 27 | PTC7 — Port C bit 7 |
| پن 28 | BKGD/MS — Background Debug Mode / Mode Select |
| پن 29 | RESET — External reset, active low |
| پن 30 | PTD0/SPSCK — Port D bit 0 / SPI clock |
| پن 31 | PTD1/MOSI — Port D bit 1 / SPI MOSI |
| پن 32 | PTD2/MISO — Port D bit 2 / SPI MISO |
| پن 33 | PTD3/SS — Port D bit 3 / SPI slave select |
| پن 34 | PTD4/TCLK1 — Port D bit 4 / timer clock |
| پن 35 | PTD5/TCLK2 — Port D bit 5 / timer clock |
| پن 36 | PTE0/TXD — Port E bit 0 / SCI TXD |
| پن 37 | PTE1/RXD — Port E bit 1 / SCI RXD |
| پن 38 | PTE2/SDA — Port E bit 2 / I2C SDA |
| پن 39 | PTE3/SCL — Port E bit 3 / I2C SCL |
| پن 40 | VDD — Digital supply |
| پن 41 | VSS — Digital ground |
| پن 42 | VDDA — Analog supply |
| پن 43 | VSSA — Analog ground |
| پن 44 | VSS — Digital ground |
عام استعمالات
S9S08AW60E5MFGE کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Control Module, HVAC Climate Control Module, White Goods and Home Appliances, Industrial Sensor Conditioning and Field Instrumentation, Low-Cost HMI and Segment LCD Panels, BLDC / Small Motor Control.
Automotive Body Control Module
The S9S08AW60E5MFGE is a strong fit for automotive body controllers (BCM) thanks to its 60 KB Flash headroom, 40 MHz HCS08 CPU, and automotive-grade -40C to +125C operating range. Within a BCM, the part typically drives multiple low-side drivers for lighting and door locks, polls digital switch inputs, and runs LIN-slavestack - tasks for which its on-chip SCI (UART), SPI, and timer/PWM peripherals are well suited. The S08 core's deterministic interrupt latency outperforms many 32-bit cores for hard-real-time body tasks, and the 44-LQFP footprint fits in space-constrained behind-the-dash PCBAs. According to the NXP MC9S08AW60 family datasheet, the device integrates a 10-bit ADC for battery voltage and temperature monitoring - the typical BCM parameter set.
تجویز کردہ
HVAC Climate Control Module
In HVAC climate-control modules, the S9S08AW60E5MFGE drives blower-motor PWM, mixes blend/door actuators, reads cabin NTC temperature sensors, and handles user HMI inputs from the rotary knob or touchscreen. The 60 KB Flash accommodates lookup-table-based airflow algorithms and diagnostic routines, while the multi-channel 10-bit ADC digitizes thermistor and potentiometer inputs with sufficient resolution for the +/-1C control dead-band. Operating at 3.3 V or 5 V, the part integrates directly with 5 V actuator drivers and 3.3 V LIN transceivers, eliminating level shifters. Its 44-LQFP small footprint suits in-dash PCBs where board area is limited. The 40 MHz CPU and one-cycle BDM debug simplify calibration tuning during development.
تجویز کردہ
White Goods and Home Appliances
The S9S08AW60E5MFGE is widely deployed in white-goods main controllers - washing machines, dishwashers, ovens, and refrigerators - where deterministic motor and pump timing, plus long Flash endurance, are more critical than raw CPU throughput. The S08 core runs the wash-cycle finite-state machine, AC triac zero-cross detection, water-level sensing, and door-switch polling while leaving headroom for fuzzy-logic cycle optimization in 60 KB Flash. The 44-LQFP is a low-cost surface-mount package compatible with wave-solderable lead-free reflow profiles. AEC-Q-derived family test flow also provides long-term reliability data helpful in 10-year-life white-goods designs.
تجویز کردہ
Industrial Sensor Conditioning and Field Instrumentation
In industrial sensor signal-conditioning and field-instrumentation products (pressure transmitters, level probes, RTU I/O modules), the S9S08AW60E5MFGE provides enough CPU headroom for linearization and HART-style digital communication stacks with 60 KB Flash and on-chip ADC, SCI, SPI, and I2C peripherals. The wide 3 V to 5 V supply range simplifies battery- or loop-powered designs. The -40C to +125C operating range covers both outdoor instrumentation enclosures and inside-control-cabinet environments. The 44-LQFP and BDM debug pin allow easy in-circuit firmware iteration during sensor-calibration tuning - a common task in industrial measurement products.
تجویز کردہ
Low-Cost HMI and Segment LCD Panels
The S9S08AW60E5MFGE is well-matched to low-cost segment-LCD human-machine interface (HMI) panels found in printers, copiers, security alarms, and small appliances. The HCS08 core scans keypad matrices, drives LCD segments via timer PWM, and handles serial updates from a master controller via SCI or I2C. The 60 KB Flash stores multilanguage character tables and menu structures. The 44-LQFP allows compact PCBAs behind the LCD glass. Low-power stop modes support battery-backed RTC operation in security panels.
تجویز کردہ
BLDC / Small Motor Control
Although the S9S08AW60E5MFGE is not a dedicated motor-control IC, it is widely used as a low-cost supervisory MCU alongside a motor-driver IC for small BLDC and stepper applications (fans, pumps, valves, small appliances). The HCS08 core's deterministic interrupt response and TPM-PWM channels drive the commutation logic, while the on-chip ADC samples back-EMF or current-sense signals to close the speed loop. The 60 KB Flash holds the speed-torque curve and PI gains. The 44-LQFP enables PCB layouts with short traces between the MCU and the gate-driver, minimizing EMI.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا S9S08AW60E5MFGE — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MC9S08AW60CFGE | MC9S08AW60CFGER | MC9S08AW48CFGE | MC9S08AW60CPUE | MC9S12DT128MPVE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 44-LQFP | 44-LQFP - same | 44-LQFP - same | 44-LQFP - same | 44-LQFP - same | 44-LQFP - same |
| Core | HCS08, 8-bit | HCS08, 8-bit | HCS08, 8-bit | HCS08, 8-bit | HCS08, 8-bit | HCS12, 16-bit |
| Program Flash | 60 KB | 60 KB | 60 KB | 48 KB (-20%) | 60 KB | 128 KB (+113%) |
| CPU Clock (Max) | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 25 MHz bus |
| Supply Voltage | 3 V / 3.3 V / 5 V | 3 V / 3.3 V / 5 V | 3 V / 3.3 V / 5 V | 3 V / 3.3 V / 5 V | 3 V / 3.3 V / 5 V | 5 V |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +125C |
| Debug Interface | BDM | BDM | BDM | BDM | BDM | BDM |
اہم امتیازی خصوصیات
- 60 KB Flash and 40 MHz core in a compact 44-LQFP (بمقابلہMC9S08AW48CFGE)
- Automotive-grade -40C to +125C temperature range (بمقابلہMC9S08AW60CPUE)
- Tape-and-reel packaging for SMT assembly (بمقابلہMC9S08AW60CFGE)
- Pure HCS08 8-bit cost-effectiveness (بمقابلہMC9S12DT128MPVE)
ڈیزائن نوٹس
Place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pin pair (typically within 5 mm trace length). Add a bulk 4.7 uF tantalum or 10 uF ceramic capacitor on the main 3.3 V or 5 V rail. The S9S08AW60E5MFGE has separate VDDA/VSSA analog supply pins - power these from the same rail through a ferrite bead and a dedicated 100 nF cap to reject switching noise from the digital core.
Always install a 4.7 kohm pull-up on the BKGD/MS pin and a 10 kohm pull-up on the RESET pin. Without the BKGD pull-up the part will not enter BDM debug mode and may power up in an undefined state on some reset events. Estimated: reset and BDM pin external requirements based on industry-standard S08 practice - verify with the family datasheet for the exact RESET debounce timing.
The 44-LQFP has a 0.8 mm lead pitch - use a 4-layer PCB with continuous ground plane under the part for best EMI performance. Keep ADC traces (PTB[0:7]) short and away from PWM outputs; if possible, route analog and digital signals on opposite PCB layers separated by ground. The exposed thermal pad is not present on this 44-LQFP package - thermal performance relies solely on the LQFP leads dissipating into inner copper layers.
For SPI and I2C buses above 1 MHz, add 10-33 ohm series resistors near the MCU pins to dampen reflections on long PCB traces. The S08 SCI/UART is robust but should still be matched with the appropriate transceiver (e.g., MAX232 for RS-232, or an isolated RS-485 transceiver for industrial networks). For SCI baud rates above 115200 verify the bus-clock-derived baud-rate error stays within +/-2%.
Estimated: at 40 MHz CPU clock, 3.3 V VDD, all peripherals enabled, the 44-LQFP package dissipates roughly 50-80 mW active - typical theta_JA of 65-75 C/W on a 4-layer PCB results in a junction temperature rise of 3-6C above ambient. The S9S08AW60E5MFGE therefore does not require a heatsink in normal embedded environments. At 5 V and full peripheral activity, dissipation can rise to ~120 mW; ensure maximum ambient does not exceed 105C.
تعمیل کی معلومات
RoHS and lead-free confirmed by NXP product page; AEC-Q100 implied by the -40C to +125C automotive temperature range and family datasheet; REACH and conflict-mineral status not explicitly listed and marked unknown.
