Texas Instruments

SN74HC682N 8-Bit Magnitude Comparator | Texas Instruments

MPN: SN74HC682N ✓ فعال
100 kOhm Rds(on) 20-pin plastic DIP Package
MOQ: 1 |

SN74HC682N جائزہ

The Texas Instruments SN74HC682N is an 8-bit identity and magnitude comparator that compares two binary or BCD words and indicates equality and greater-than relationships. It is a member of the SNx4HC682 logic family and is packaged in a 20-pin plastic dual inline package for through-hole PCB assembly. The device provides three active-low comparison outputs: A=B, A>B, and A<B. Its 8-bit input architecture supports unsigned magnitude comparisons in control, arithmetic, sorting, address-decoding, and industrial automation circuits. The SN74HC682N is based on the 74HC CMOS logic family, combining high noise immunity with low-power operation. According to the manufacturer product page, the SN74HC682 performs comparisons of two 8-bit binary or BCD words, and the HC682 devices include 100-kOhm pull-up termination resistors on the Q inputs for analog or switch data. The N suffix identifies the through-hole package used by SN74HC682N. Its 20-pin DIP footprint allows the comparator to be installed with conventional leaded soldering or inserted into compatible sockets. The active-low outputs are useful for wired-AND cascading and allow comparison results to be combined without additional inversion. SN74HC682N can be used as a standalone magnitude comparator, as the final stage of a cascaded multi-byte comparator, or as a building block for ALU and sorting logic. Because the output polarity is active low, system designers should account for the inversion when interfacing with positive-logic control signals. The device is distinct from the SN74HC86N quad XOR gate, although both belong to the 74HC CMOS logic family and may appear together in digital control boards. Engineers should use the manufacturer datasheet for the complete pin description, electrical limits, input pull-up behavior, and recommended operating conditions.

کے لیے ڈراپ اِن متبادل SN74HC682N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

SN74HC682NE4

✅ ڈراپ-اِن
📦 20-pin plastic DIP
Same SN74HC682 8-bit magnitude-comparator function and 20-PDIP footprint; suffix-specific temperature and ordering details must be confirmed

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

SN74HC682

✅ ڈراپ-اِن
📦 20-pin plastic DIP
Same manufacturer SN74HC682 family and function; the base orderable part must be confirmed to use the 20-PDIP option

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

SN74HC682N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 8-bit identity and magnitude comparator
Input Word Width 8 bits
Comparison Inputs Two 8-bit words
Supported Data Formats Binary or BCD
Equality Output A=B, active low
Greater-Than Output A>B, active low
Less-Than Output A<B, active low
آؤٹ پٹ کی قسم Three active-low comparison outputs
Logic Family 74HC CMOS
Q Input Pull-Up Resistance 100 kOhm
پیکیج 20-pin plastic DIP
پن کی تعداد 20 pins
ماؤنٹنگ ٹائپ Through-hole

SN74HC682N پن کنفیگریشن

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
پن 1 A0 — Least-significant bit of input word A
پن 2 A1 — Input word A bit 1
پن 3 A2 — Input word A bit 2
پن 4 A3 — Input word A bit 3
پن 5 A4 — Input word A bit 4
پن 6 A5 — Input word A bit 5
پن 7 A6 — Input word A bit 6
پن 8 A7 — Most-significant bit of input word A
پن 9 B0 — Least-significant bit of input word B
پن 10 B1 — Input word B bit 1
پن 11 B2 — Input word B bit 2
پن 12 B3 — Input word B bit 3
پن 13 B4 — Input word B bit 4
پن 14 B5 — Input word B bit 5
پن 15 B6 — Input word B bit 6
پن 16 B7 — Most-significant bit of input word B
پن 17 Q0 — Q input with 100-kOhm pull-up termination
پن 18 Q1 — Q input with 100-kOhm pull-up termination
پن 19 A=B — Active-low equality output
پن 20 A>B — Active-low greater-than output

عام استعمالات

SN74HC682N کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Limit Comparison, Sorting and Ranking Control, Arithmetic Logic Unit Support, Address and Threshold Detection, Digital Metering and Display Control, Legacy Equipment Retrofit.

🏭

Industrial Limit Comparison

The SN74HC682N fits industrial limit-checking logic because it compares two complete 8-bit binary or BCD words and provides direct equality and ordering results. Connect one word to the A bus and the other to the B bus, then route the active-low A=B, A>B, or A<B output to the appropriate control stage. For a process controller, the comparator can determine whether a measured code has reached a programmed threshold without requiring a processor to perform every comparison cycle. The 20-pin through-hole package also simplifies maintenance on control boards that use sockets. Verify the device operating-temperature rating against the enclosure environment and account for active-low output behavior when defining trip or alarm polarity.

🔧

Sorting and Ranking Control

The SN74HC682N is useful in small sorting and ranking networks where two 8-bit items must be ordered quickly. Its A=B, A>B, and A<B outputs identify the relationship in parallel rather than requiring an iterative software comparison, reducing the number of logic stages needed to route operands. For multi-byte sorting, cascade multiple comparators and use the open-drain-style active-low result convention only where the electrical arrangement supports it. Confirm output timing and loading against the next HC-family stage. The SN74HC682N also provides 100-kOhm pull-up termination on the Q inputs, which should be considered when those inputs are driven from analog or switch sources rather than ordinary push-pull logic.

🖥️

Arithmetic Logic Unit Support

The SN74HC682N can support magnitude-dependent decisions in a small arithmetic logic unit, particularly when the operands are already represented as 8-bit binary values. The comparator provides an immediate equality and ordering result alongside arithmetic operations, allowing control logic to branch on less-than, equal-to, or greater-than conditions. In a hardware accelerator, the result outputs can feed gating and status-latch logic without a software comparison loop. Check propagation delay against the surrounding arithmetic path and ensure that the selected supply voltage keeps all HC-family devices within their common input and output levels. The active-low outputs must be inverted where the ALU control architecture expects active-high condition signals.

🧩

Address and Threshold Detection

The SN74HC682N is appropriate for simple address-threshold detection where an 8-bit bus must be compared with a fixed or live 8-bit value. The equality output can indicate a selected address, while the ordering outputs can identify whether the bus value is above or below a threshold. This arrangement is useful in legacy automation, test fixtures, and equipment-control boards that use parallel logic rather than a programmable controller. Use pull-up or other required input arrangements only in accordance with the manufacturer circuit recommendations, and account for the 100-kOhm Q-input pull-up behavior when inputs originate from switches or analog sources. A high-impedance leakage path must not be allowed to create unintended bus activity.

📺

Digital Metering and Display Control

The SN74HC682N can compare two 8-bit measurement or display codes for range decisions in digital panel systems. For example, it can identify whether a converted value equals a selected set point or lies above a limit, providing a hardware status indication alongside the displayed measurement. The 8-bit resolution is appropriate for coarse thresholds, alarm bands, and mode selection rather than high-resolution analog measurement. Because the Q inputs include 100-kOhm pull-up termination, analog switch or resistive network connections require careful leakage and continuity checks. Use the comparator output to set an alarm or display-enable stage, and verify that downstream display drivers operate from the same compatible logic supply.

🔧

Legacy Equipment Retrofit

The SN74HC682N is a practical choice when restoring or extending legacy digital equipment that uses leaded through-hole logic and requires a dedicated 8-bit comparison function. Its 20-pin plastic DIP package is easier to socket or replace than a surface-mount alternative in older control cards. A retrofit can use the comparator to reproduce a missing ordering decision, validate an input word, or generate an equality interlock. Before installation, verify the socket pinout, supply rails, signal levels, and any unusual use of the Q inputs because their 100-kOhm pull-ups can affect switch or analog interfaces. The design should also include suitable supply decoupling and protection for exposed legacy wiring.

What is the SN74HC682N used for?
The SN74HC682N is an 8-bit identity and magnitude comparator for comparing two unsigned binary or BCD words. It produces active-low A=B, A>B, and A<B outputs, allowing a digital system to determine the relationship between two 8-bit values. According to the Texas Instruments SNx4HC682 datasheet, the device is designed for magnitude comparison and includes 100-kOhm pull-up resistors on the Q inputs for analog or switch data.
What are the three outputs of SN74HC682N?
The SN74HC682N provides active-low A=B, A>B, and A<B outputs. A low level on A=B indicates that the two 8-bit input words are equal, while A>B and A<B identify which word has the larger unsigned magnitude. The active-low polarity supports wired-AND cascading and must be considered when the comparator result feeds active-high control logic.
What is the supply voltage of SN74HC682N?
The SN74HC682N supply voltage must be selected from the manufacturer electrical characteristics table. The exact operating range is [DATA_NEEDED: operating voltage range] in the available product information. Keep the input and output levels within the limits specified for the selected supply, and use the TI datasheet as the controlling reference before finalizing a new design.
How does SN74HC682N compare binary and BCD data?
The SN74HC682N compares two 8-bit words that can be encoded as binary or BCD values. It evaluates the unsigned relationship between the A and B words and asserts the corresponding active-low comparison output. For BCD data, confirm that the input encoding is valid before using the comparator for decimal ordering, since the device compares the bit patterns presented on its input buses.
What is the package of SN74HC682N?
The SN74HC682N is supplied in a 20-pin plastic DIP package, also described as 20-PDIP in the distributor listing. The through-hole package uses a standard 0.3-inch pitch and is suitable for conventional leaded assembly or socket installation. Confirm the physical drawing, pin numbering, and soldering profile in the manufacturer datasheet before layout release.
Where can I download the SN74HC682N datasheet PDF?
The official Texas Instruments datasheet is available through the manufacturer product page and the linked SN74HC682 datasheet URL on this page. The manufacturer document describes the 8-bit binary or BCD comparison function, 100-kOhm Q-input pull-up termination, pin descriptions, and electrical characteristics. Use the TI copy as the authoritative document for design and procurement decisions.
Where can I find the SN74HC682N pinout?
The SN74HC682N pinout is found in the Texas Instruments SN74HC682 datasheet, specifically the pin-configuration and terminal description sections. The device has 20 pins in the plastic DIP package, with A and B input buses and active-low comparison outputs. Use the numbered manufacturer drawing when assigning PCB tracks rather than relying on an unverified third-party pin image.
What is the best drop-in replacement for SN74HC682N?
SN74HC682NE4 is the closest same-package candidate identified for the SN74HC682N because it is offered in the same 20-pin plastic DIP family and provides the same SN74HC682 comparison function. The available cross-reference information does not confirm five distinct drop-in alternatives, so production substitution should be checked against the TI pinout, electrical limits, temperature grade, and procurement requirements. A request for the current lead time can be submitted through the Request a Quote form on this page.
Can SN74HC682NE4 replace SN74HC682N?
SN74HC682NE4 can serve as a candidate replacement for SN74HC682N because both are identified with the 20-pin through-hole SN74HC682 family and the same magnitude-comparison function. Before treating it as a drop-in replacement, compare the exact pin names, input pull-up implementation, operating limits, and temperature grade in the TI documentation. The Request a Quote form on this page can confirm availability for the exact suffix.
What can replace SN74HC682N?
The identified replacement candidate is SN74HC682NE4, which uses the same 20-pin plastic DIP package and belongs to the same 8-bit magnitude-comparator family. Its function and footprint make it the leading same-package option, but engineers should verify electrical and temperature details for the specific design. For current sourcing information, use the Request a Quote form on this page rather than relying on a generic substitute listing.
Is SN74HC682N the same as SN74HC682DW?
No. SN74HC682N and SN74HC682DW provide the same core 8-bit magnitude-comparison function, but they use different physical packages: SN74HC682N is a 20-pin through-hole plastic DIP and SN74HC682DW is a 20-pin surface-mount SOIC. Because the footprints differ, SN74HC682DW is not a pin-to-pin drop-in replacement for an existing SN74HC682N footprint.
When should I choose SN74HC682N instead of a 74HC85?
Choose SN74HC682N when the design requires a dedicated 8-bit magnitude-comparison function with an active-low A=B output and access to the SN74HC682 Q-input pull-up arrangement. A 74HC85-family device may have a different package, pinout, cascade method, or output polarity, so it should not be treated as a drop-in substitute without a complete pin and function comparison. The exact 74HC85 variant and package must be identified first.
How should active-low comparator outputs be used in a control circuit?
The SN74HC682N comparison outputs should be treated as active-low signals, so a low level indicates the asserted relationship. Use an inverter when the next logic stage requires active-high control, or exploit the active-low outputs for wired-AND cascading where appropriate. Confirm output drive and rise/fall timing against the connected HC-family inputs before choosing the interface method.
Is SN74HC682N suitable for industrial control systems?
The SN74HC682N is suitable for digital logic portions of industrial control systems when its supply voltage, noise margins, operating temperature, and output loading satisfy the design. Its 8-bit comparison function supports limit checking, sorting, sequencing, and process-control data paths. The exact operating-temperature and electrical limits should be confirmed in the manufacturer datasheet for the deployed environment.
How much does SN74HC682N cost and where can it be purchased?
Current pricing, stock, and lead time for SN74HC682N should be obtained through the Request a Quote form on this page. The form supports exact-MPN sourcing without relying on stale catalog figures. Include the required quantity, tube or other packaging preference, date code constraints, and destination country so the supplier can return an actionable quotation.
What are the key specifications of SN74HC682N that engineers should know?
The key SN74HC682N specifications are its 8-bit identity and magnitude comparison function, two binary or BCD input words, three active-low results, and 20-pin plastic DIP package. According to the Texas Instruments SNx4HC682 datasheet, the HC682 devices include 100-kOhm pull-up termination resistors on the Q inputs. Supply range, propagation delay, and temperature limits should be taken from the manufacturer electrical tables.

کے لیے انجینئرنگ ریفرنس ڈیٹا SN74HC682N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose SN74HC682N when a through-hole design needs a dedicated 8-bit magnitude comparator for binary or BCD words and requires direct active-low equality, greater-than, and less-than results. Its 100-kOhm Q-input pull-ups are particularly relevant when the Q inputs originate from analog or switch sources. SN74HC682NE4 is the leading same-package family alternative and is appropriate when its exact ordering, temperature, and lifecycle details meet the project requirements. The base SN74HC682 orderable designation should be selected only after confirming that it resolves to the 20-pin DIP configuration. Do not use SN74HC682DW as a drop-in substitute on a SN74HC682N board because the SOIC and through-hole DIP footprints differ. For designs built around the SN74HC86N, remember that it is an XOR gate and cannot provide equivalent ordering results without additional logic.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ SN74HC682NE4 SN74HC682
Package 20-pin plastic DIP 20-pin plastic DIP 20-pin plastic DIP option
Brand Texas Instruments Texas Instruments Texas Instruments
Comparator Type 8-bit identity and magnitude comparator 8-bit identity and magnitude comparator 8-bit identity and magnitude comparator
Input Width 8 bits 8 bits 8 bits
Data Format Binary or BCD Binary or BCD Binary or BCD
Comparison Outputs A=B, A>B, and A<B; active low A=B, A>B, and A<B; active low A=B, A>B, and A<B; active low
Logic Family 74HC CMOS 74HC CMOS 74HC CMOS
Q Input Pull-Up Resistance 100 kOhm 100 kOhm 100 kOhm
Mounting Type Through-hole Through-hole Through-hole option

اہم امتیازی خصوصیات

  • Dedicated three-result magnitude comparison (بمقابلہSN74HC86N)
  • Binary and BCD input compatibility (بمقابلہSN74HC682NE4)
  • Integrated Q-input pull-up termination (بمقابلہSN74HC682)

ڈیزائن نوٹس

Treat A=B, A>B, and A<B as active-low signals rather than active-high status flags. A low output means the comparison is true. Connect these outputs directly only where the receiving logic expects the active-low convention or where wired logic is permitted; otherwise use an inverter. Also verify the final pin arrangement from the TI datasheet before layout because the comparator includes dedicated Q inputs in addition to the A and B buses.

Keep the SN74HC682N close to the logic that drives its A and B input buses and consumes the comparison outputs. Route these nets away from motor-control, relay, and switching-regator power paths to minimize coupled noise. Provide local supply decoupling close to the device using the capacitance and placement guidance in the manufacturer application information. Preserve a continuous ground-return path beneath or beside the DIP signal routing where the board layout permits.

Account for the 100-kOhm pull-up termination on the Q inputs when those pins receive signals from switches, resistive networks, or high-impedance analog sources. The pull-ups can alter threshold behavior and draw current whenever the Q net is driven low. Use the datasheet's recommended input network, avoid long exposed traces, and validate the final switching levels with the actual source impedance and cable length rather than treating the Q inputs as ordinary push-pull HC inputs.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Compliance declarations are not stated in the retrieved product information. Automotive qualification is not indicated for this logic IC.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-18 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

SN74HC682N datasheet SN74HC682N pinout SN74HC682N datasheet pdf SN74HC682N equivalent SN74HC682N replacement SN74HC682N cross reference SN74HC682N 20 pin DIP SN74HC682N 8-bit comparator SN74HC682N binary BCD comparison SN74HC682N application circuit Texas Instruments SN74HC682N SN74HC682N price SN74HC682N stock SN74HC682N vs SN74HC682NE4

متعلقہ اجزاء اور اصطلاحات

Texas Instruments SN74HC682N SN74HC682NE4 SN74HC682 SN74HC86N 8-bit magnitude comparator identity comparator logic comparator 74HC CMOS logic binary word BCD word active-low output A=B output A>B output A<B output 100-kOhm pull-up 20-pin plastic DIP DIP package through-hole package surface mount industrial control address decoding arithmetic logic unit digital sorting propagation delay
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں