SPC5601PEF0MLL6 - 32-bit Power Arch MCU, 192KB Flash, 100-LQFP | NXP
MPN: SPC5601PEF0MLL6 ✓ فعالSPC5601PEF0MLL6 جائزہ
A 32-bit MCU (microcontroller unit) is a single-chip computer that combines a processor core, program and data memory, and a rich set of on-chip peripherals. Within NXP's automotive portfolio it belongs to the MPC56xx Qorivva family, which targets chassis, body, and industrial real-time control. SPC5601PEF0MLL6 specifically uses the Power Architecture e200z0h core - a single-issue, in-order 32-bit RISC core tuned for deterministic interrupt response, making it a step up in performance from legacy 16-bit MCUs in the same chassis-electronics design space.
Key features include 192 KB on-chip Flash with ECC, 12 KB SRAM, 79 general-purpose I/O pins, and an integrated peripheral set: DMA, PWM, watchdog, POR (power-on reset), and a connectivity block combining CAN, LIN, SCI (UART), and SPI. The device supports single 5 V supply operation typical of automotive body controllers, and the 100-LQFP package offers a thermally efficient 14x14 mm footprint with a JEDEC-compatible reflow profile (peak 260C). The -40C to +125C operating range and AEC-Q100-style qualification make it automotive-grade.
Typical applications include automotive chassis control (electric power steering, suspension, braking sensor fusion), body-electronics modules (BCM, lighting, HVAC), industrial drives, and safety-relevant sensor preprocessing. The combination of CAN/LIN connectivity and a deterministic e200z0h core makes the part especially well suited to act as a sub-MCU in zonal architectures, offloading deterministic tasks from a central vehicle computer.
When designing with this device, ensure that the 5 V supply ramp meets the POR thresholds and place the decoupling network (typically 100 nF + 1 uF) within 5 mm of the VDD pins. Use the on-chip DMA to offload SPI and CAN transactions from the core when targeting deterministic interrupt latency under load. Verify toolchain compatibility with NXP's SPC5Studio IDE and PowerPC GCC before committing firmware.
کے لیے ڈراپ اِن متبادل SPC5601PEF0MLL6 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں SPC5601PEF0MLL6 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Connectivity, Core Processor, RAM Size, Core Size, Maximum Clock Frequency.
SPC5602BF2MLL6
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →SPC5644AF0MLU2
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →SPC5602BK0MLL6
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SPC5746BSK1MKU2
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →SPC5601PEF0MLL6 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Processor | e200z0h (Power Architecture) |
| Core Size | 32-Bit Single-Core |
| Core Architecture | Power Architecture, single-issue, in-order |
| Speed (Max) | 64 MHz |
| Program Memory Size (Flash) | 192 KB (192K x 8) |
| RAM Size | 12 KB |
| Connectivity | CANbus, LINbus, SCI (UART), SPI |
| Peripherals | DMA, POR, PWM, WDT (Watchdog) |
| Number of I/O | 79 |
| پیکیج / کیس | 100-LQFP (14x14 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Terminal Form | GULL WING |
| Peak Reflow Temperature | 260C (JEDEC lead-free profile) |
| آپریٹنگ درجہ حرارت رینج | -40C to +125C |
| Grade | Automotive Grade (AEC-Q100) |
| Series / Family | MPC56xx Qorivva |
| RoHS اسٹیٹس | Compliant (lead-free per package datasheet) |
SPC5601PEF0MLL6 100-lqfp (14x14 mm) پن کنفیگریشن گائیڈ
SPC5601PEF0MLL6 (100-lqfp (14x14 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SPC5601PEF0MLL6.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
SPC5601PEF0MLL6 کے لیے موزوں ہے 7 ایپلیکیشنs: Automotive Chassis Control Module, Body Control Module (BCM), Industrial Sensor Hub / Field I/O Node, Automotive LIN Slave Node, Battery Management Sub-Controller (Sub-MCU), Drone / UAV Flight Controller (Safety-Limited), HVAC Actuator Module.
Automotive Chassis Control Module
The SPC5601PEF0MLL6 fits automotive chassis modules - electric power steering, suspension, and brake sensor fusion - where deterministic interrupt response and CAN/LIN connectivity are mandatory. The e200z0h core at 64 MHz executes chassis-control loops with predictable timing, while the on-chip PWM block drives actuator references and the DMA offloads sensor-bus traffic without CPU stalls. The 100-LQFP package and -40C to +125C operating range support under-hood and chassis-mounted ECU placement, and 192 KB Flash accommodates bootloader plus communication stacks.
تجویز کردہ
Body Control Module (BCM)
The SPC5601PEF0MLL6 is well matched to body-electronics modules controlling lighting, HVAC, mirrors, and wipers. Its CAN/LIN connectivity integrates directly with vehicle multiplexing networks, while 79 GPIO drive LEDs, relays, and switch inputs without external expanders. The 192 KB Flash is sized for typical BCM application code plus bootloader, and 12 KB SRAM is sufficient for stack and small diagnostic buffers. The 5 V supply tolerance typical of the MPC56xx family simplifies design versus lower-voltage rails used elsewhere.
تجویز کردہ
Industrial Sensor Hub / Field I/O Node
For industrial sensor hubs and field I/O nodes, the SPC5601PEF0MLL6 supplies the deterministic compute, RS232/RS485-class SCI communications, and PWM outputs required for closed-loop control and instrumentation aggregation. Its 64 MHz e200z0h core handles multi-rate sampling loops comfortably, while the on-chip DMA moves SPI-burst sensor data without interrupting control tasks. The -40C to +125C operating range supports deployment inside unshielded industrial cabinets; 79 GPIO often eliminates the need for an external I/O expander.
تجویز کردہ
Automotive LIN Slave Node
The SPC5601PEF0MLL6 is a natural fit for LIN-bus slave nodes in window lifters, seat controllers, and mirror modules, where cost and footprint dominate. Its integrated SCI block drives LIN through an external transceiver, the PWM block directly controls motors, and the watchdog timer supports the LIN-specified fault-detection timing. The 100-LQFP's 14x14 mm footprint is appropriate for distributed zonal ECUs, and 192 KB Flash supports ISO 17987 LIN conformance plus diagnostic routines.
تجویز کردہ
Battery Management Sub-Controller (Sub-MCU)
In zonal battery-management architectures, the SPC5601PEF0MLL6 acts as a sub-MCU performing cell-balancing and local monitoring before forwarding aggregated telemetry over CAN to a central BMS host. The e200z0h core's deterministic interrupt handling ensures precise cell-voltage sampling windows, while DMA offloads SPI ADC reads. The 192 KB Flash stores look-up tables and balancing algorithms, and 12 KB SRAM holds sample buffers between transmissions.
تجویز کردہ
Drone / UAV Flight Controller (Safety-Limited)
For cost- and safety-limited UAV flight controllers and tethered-drone ESCs, the SPC5601PEF0MLL6 offers the deterministic timing, automotive-grade temperature range, and PWM channels required for brushless motor control. Its 64 MHz e200z0h core runs classic PID loops at kilohertz rates, and the on-chip DMA minimizes jitter on sensor-bus reads. Designers targeting FAA-relevant safety cases should however verify the part's qualification status for the chosen UAV category and consider higher-end SPC57 or Aurix parts for level-A failure coverage.
تجویز کردہ
HVAC Actuator Module
The SPC5601PEF0MLL6 serves as a tightly integrated HVAC actuator controller, driving blower motors and damper servos via PWM while reading temperature and pressure inputs via SPI/ADC. Its 79 GPIO support multiple airflow sensors and mode-position feedback switches without external multiplexers. AEC-Q100 automotive qualification and the -40C to +125C operating range cover cabin and underhood HVAC placements, and 192 KB Flash accommodates both legacy and modern CAN-based HVAC command sets.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا SPC5601PEF0MLL6 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | SPC5602BF2MLL6 | SPC5644AF0MLU2 | SPC5602BK0MLL6 | SPC5746BSK1MKU2 |
|---|---|---|---|---|---|
| Package | 100-LQFP (14x14 mm) | 100-LQFP - same | 100-LQFP - same | 100-LQFP - same | 100-LQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | e200z0h (Power Architecture) | e200z0h (Power Architecture) | e200z4 (Power Architecture, higher-perf) | e200z0h (Power Architecture) | e200z4 (Power Architecture, lockstep) |
| Speed (Max) | 64 MHz | 64 MHz | 60-80 MHz | 64 MHz | Up to 200 MHz class |
| Flash Size | 192 KB | Larger Flash in family | Larger Flash | Comparable in MPC56xx family | Multi-MB Flash tier |
| RAM Size | 12 KB | Larger SRAM in family | Larger SRAM | Comparable in MPC56xx family | Multi-MB SRAM tier |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| Connectivity | CAN, LIN, SCI, SPI | CAN, LIN, SCI, SPI | CAN, LIN, SCI, SPI, FlexRay | CAN, LIN, SCI, SPI | CAN-FD, LIN, FlexRay, Ethernet |
| Grade | Automotive (AEC-Q100) | Automotive (AEC-Q100) | Automotive (AEC-Q100) | Automotive (AEC-Q100) | Automotive ASIL-D capable |
| Unit Price (qty 1, USD) | 13.23 | Higher tier (more Flash) | Higher tier | Comparable tier | Substantially higher (premium tier) |
اہم امتیازی خصوصیات
- Lowest-cost MPC56xx 100-LQFP option with e200z0h core (بمقابلہSPC5602BF2MLL6)
- Predictable deterministic core for hard real-time loops (بمقابلہSPC5746BSK1MKU2)
- Power Architecture ecosystem with mature automotive toolchain (بمقابلہMC9S12DT128MPVE (HCS12 family))
ڈیزائن نوٹس
Decouple the VDD and VDDA pins with 100 nF + 1 uF ceramic capacitor pairs placed within 5 mm of the package pins, matching NXP MPC56xx layout guidelines. The POR block is sensitive to slow or noisy supply ramps; ensure VDD reaches the nominal value within the published rise-time spec, otherwise the device may enter or exit reset unpredictably. Use a bulk 10 uF or larger tantalum/polymer cap at the regulator output for transient load events on motor-driven rails.
Route the CAN/LIN/SPI buses with characteristic impedances appropriate for the ECU harness (typically 100-120 ohm differential for CAN). Keep oscillator traces short and symmetric, place the crystal near the XTAL pins with a guard ring tied to ground, and avoid routing switching signals across the analog supply islands. Maintain a continuous ground plane under the MCU and stitch vias around the LQFP perimeter for thermal dissipation.
The SPC5601PEF0MLL6's 12 KB SRAM is the tightest resource when adding Ethernet or large diagnostic buffers - plan firmware partitioning to leave headroom. Do not assume that 'AEC-Q100 automotive grade' equals 'ASIL-D capable'; the SPC5601 family supports QM / ASIL-A safety levels only - use SPC5746 or Aurix TC2xx for ASIL-C / D. Verify the toolchain (SPC5Studio, GCC, Green Hills) version is on NXP's validated list before committing to production firmware.
At 64 MHz with typical automotive IO toggling, the SPC5601PEF0MLL6 dissipation in the 100-LQFP is modest, but inside a sealed ECU without airflow the junction temperature can rise significantly. Apply the JEDEC EIA/JESD51 thermal resistance values for 100-LQFP and derate to ambient + 20C; consider adding copper pours on the PCB top layer to spread heat and improve Theta_JA. For harsh environments validate with a thermocouple or thermal camera during functional test.
تعمیل کی معلومات
AEC-Q100 qualified per NXP automotive-grade family positioning per https://www.nxp.com/part/SPC5601PEF0MLL6; however the SPC5601 family supports QM / ASIL-A safety levels only. Halogen-free status not explicitly stated in verified data; mark unknown.