MP3H6115A6T1 vs MP3H6115A6U So sánh

So sánh chi tiết song song của MP3H6115A6T1 bằng NXP Semiconductors và MP3H6115A6U bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MP3H6115A6T1 MP3H6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP

MP3H6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP

MP3H6115A6T1 ✓ Hoạt động
NXP Semiconductors
MP3H6115A6U MP3H6115A6U - 15-115 kPa Absolute Pressure Sensor | NXP

MP3H6115A6U - 15-115 kPa Absolute Pressure Sensor | NXP

MP3H6115A6U ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MP3H6115A6T1 MP3H6115A6U
Thương hiệu NXP Semiconductors NXP Semiconductors
Danh mục Pressure Sensors Pressure Sensors
Trạng thái vòng đời Hoạt động Hoạt động
Pressure Type Absolute —
Operating Pressure Range 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) —
Kiểu đầu ra Analog voltage, ratiometric Analog, ratiometric
Khoảng điện áp đầu ra 0.12 V to 2.8 V (at Vdd = 3.0 V) 0.12 V to 2.8 V
Điện áp cung cấp 3.0 V typical 3 V
Điện áp cung cấp [DATA_NEEDED: supply current typical mA] —
Khoảng nhiệt độ hoạt động -40 C to +125 C —
Compensated Temperature Range -40 C to +125 C —
Pressure Port Male - 0.13 inch (3.3 mm) tube Male - 0.13 inch (3.3 mm) tube
Hộp 8-SOIC (0.295 inch, 7.50 mm width) 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width
Kiểu lắp đặt Surface Mount Surface Mount
Sensor Technology MEMS piezo-resistive with on-chip bipolar op-amp —
On-Chip Signal Conditioning Yes (amplifier + temperature compensation + thin-film resistor network) —
Output Type Detail Ratiometric to Vdd —
Trạng thái RoHS [DATA_NEEDED: RoHS status] Compliant
Kiểu cảm biến — Absolute pressure sensor
Pressure Range — 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI)
Operating Pressure — 15 kPa ~ 115 kPa
Accuracy — High accuracy at high temperature (per datasheet)
Temperature Compensation — -40 C to +125 C
Technology — Piezoresistive (MEMS) with bipolar signal conditioning
Signal Conditioning — On-chip bipolar op-amp and thin-film resistor network
Output Ratiometric — Yes (output proportional to VDD)
Nhiệt độ hoạt động — -40 C to +125 C
Package Material — Durable thermoplastic (PPS) surface-mount package

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá