SN65HVD230QDRQ1 vs SN65HVD234DR So sánh

So sánh chi tiết song song của SN65HVD230QDRQ1 bằng Texas Instruments và SN65HVD234DR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD230QDRQ1 SN65HVD230QDRQ1 - 3.3V CAN Transceiver AEC-Q100 | Texas Instruments

SN65HVD230QDRQ1 - 3.3V CAN Transceiver AEC-Q100 | Texas Instruments

SN65HVD230QDRQ1 ✓ Hoạt động
Texas Instruments
SN65HVD234DR SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments

SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments

SN65HVD234DR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD230QDRQ1 SN65HVD234DR
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Giá đơn vị (USD) $1,11 $1,30
Transceiver Type CAN (Half-duplex, 1 driver / 1 receiver) —
Tốc độ dữ liệu Up to 1 Mbps —
Điện áp cung cấp 3.3 V —
Standby Mode Current 370 uA (typical) —
Bus Pin ESD Protection Exceeds 15 kV HBM —
Device ESD Rating Exceeds 2000 V per MIL-STD-883 —
Protocol Compatibility ISO 11898-2 High Speed CAN Physical Layer —
Standby Mode Yes (RS pin controlled) —
Dominant Timeout Yes —
Slew Rate Control Yes (RS pin) —
Unpowered Node Behavior Does not disturb the bus —
Khoảng nhiệt độ hoạt động -40C to +125C -40C to +125C
AEC-Q100 Qualification Qualified (Automotive Catalog) —
Hộp 8-SOIC (D), 3.90 mm width SOIC-8 (D)
Kiểu lắp đặt Surface Mount Surface Mount
Packaging Tape & Reel (DR) —
Product Type — CAN Bus Transceiver
Protocol — ISO 11898-1 CAN 2.0A/B
Supply Voltage (VCC) — 3.0 V to 3.6 V
Logic Supply Voltage (VIO) — Not required (3.3V logic)
Maximum Signaling Rate — 1 Mbps
Number of Drivers/Receivers — 1/1
Bus Fault Protection — +/-36 V
ESD Protection (Bus Pins, HBM) — >16 kV
Common-Mode Input Range — +/-12 V (extended)
Maximum Nodes Supported — 120
I/O Logic Level — LVTTL, 5V-tolerant
Sleep Mode Supply Current — 0.05 uA (typical)
Standby Mode Supply Current — 370 uA (typical)
Trạng thái RoHS — Compliant
Modes of Operation (RS Pin) — High-speed, Slope Control, Low-power Standby
Dominant Time-Out Protection — Yes
Tắt nhiệt — Yes

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá