Intel

10CL016YE144I7G - Cyclone 10 LP FPGA, 16K LE, EQFP-144 | Intel

MPN: 10CL016YE144I7G ✓ Hoạt động

LVDS, LVCMOS, SSTL, HSTL Rds(on) 144-pin EQFP (Enhanced QFP) with exposed pad, 20x20 mm Package 20 Speed 56 blocks / 516,096 bits (504 Kb) Memory

Yêu cầu báo giá

MOQ: 1 |

Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

Số lượng

10CL016YE144I7G Tóm tắt

The Intel 10CL016YE144I7G is a low-power Cyclone 10 LP field-programmable gate array (FPGA) integrating 15,408 logic elements, 516,096 bits of embedded M9K SRAM, and 56 hardware 18x18 multipliers in a 144-pin enhanced QFP (EQFP-144) package with an exposed thermal pad. Built on a 60 nm low-power process, the device provides 78 user I/O pins supporting LVDS, LVCMOS, SSTL, and HSTL standards, four general-purpose PLLs, and a global clock network serving up to 20 clock domains.

A field-programmable gate array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs) connected via programmable interconnect fabric. Within the broader hierarchy, FPGAs belong to programmable logic devices (PLDs), which sit alongside ASICs, microcontrollers, and DSPs as the main classes of digital processing silicon. The Cyclone 10 LP family targets the low-power, cost-optimized end of the Intel FPGA portfolio, prioritizing low static and dynamic power over maximum logic density or transceiver bandwidth, and is commonly used as a glue-logic, motor-control, or image-pipeline accelerator in industrial and embedded designs.

Key features include 56 embedded 18x18 multipliers delivering up to 1.3 GMACS DSP throughput, 516 Kbits of embedded M9K SRAM, four PLLs per device, and support for external memory interfaces including DDR2, DDR3, LPDDR2, and QDRII/+. The device supports high-speed LVDS interfaces up to 875 Mbps and offers configuration via passive serial (AS), active parallel (AP), JTAG, and Fast Passive Parallel (FPP) schemes, with a configuration bitstream size of approximately 5.6 Mbits.

Typical applications span industrial motor control and factory automation, video surveillance and image processing pipelines, automotive driver-assistance body and infotainment domains, portable handheld test equipment, machine vision systems, and IoT edge nodes requiring custom parallel logic or DSP acceleration. The industrial-grade -40C to +100C (I7G) junction temperature range and lead-free EQFP-144 package also make the part suitable for harsh-environment deployment.

When designing with this part, ensure the PCB provides adequate thermal relief under the exposed pad - the EQFP-144 EP must be soldered to a thermally conductive land pattern with at least nine thermal vias for the I7G industrial temperature grade. Plan configuration memory selection (EPCS16, EPCS64, or compatible serial flash) early in the schematic because the Cyclone 10 LP family does not include internal flash storage.

This page combines distributor pricing, drop-in same-package Cyclone 10 LP alternatives, and practical board-level guidance that the manufacturer datasheet alone does not provide.

Bộ thay thế dễ dàng lắp đặt cho 10CL016YE144I7G — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với 10CL016YE144I7G (cùng hình factor và footprint) — khác nhau ở Package, Configuration Modes, Operating Temperature, PLLs, Family.

10CL016YE144A7G

Intel

Package: 144-LQFP Exposed Pad (E144)

Configuration Modes: PS, FPP, JTAG

Operating Temperature: -40 C to +125 C (Automotive, A7G grade)

So sánh với 10CL016YE144I7G →

10CL016YE144C6G

Altera

Package: 144-pin EQFP/LQFP (Exposed Pad)

PLLs: 4

So sánh với 10CL016YE144I7G →

10CL016YE144C8G

Intel

Package: 144-pin EQFP Exposed Pad

Configuration Modes: JTAG, AS, PS, FPP

Operating Temperature: 0C to +85C (commercial)

So sánh với 10CL016YE144I7G →

10CL016ZE144I8G

Altera

Package: 144-LQFP Exposed Pad (EQFP-144)

Operating Temperature: -40C to +100C (Industrial)

PLLs: 4

So sánh với 10CL016YE144I7G →

10CL016ZE144I7G

✅ Drop-In

📦 EQFP-144

same 15,408 LE, EQFP-144 footprint, speed grade Z vs Y (slightly slower timing)

📋 Tham chiếu thay thế (không có trong danh mục)

10CL016YE144C8G

✅ Drop-In

Intel

📦 EQFP-144

Cyclone 10 LP · 15,408 · 516,096 bits (M9K blocks) · 56 (18x18) · 78 · 4 · 60 nm low-power · 1.0 V

Liên hệ để biết giá

Xem tài liệu →

ℹ️ 1 cấu phần chéo bị ẩn — hộp khác yêu cầu hàn PCB và không phải là bộ thay thế đúng đắn. Liên hệ với chúng tôi nếu bạn cần đề xuất cấu phần chéo.

10CL016YE144I7G Tỷ lệ tối đa & tính chất điện

Family	Cyclone 10 LP
Logic Elements	15,408
Adaptive Logic Modules (ALMs)	9,630
Embedded Memory (M9K blocks)	56 blocks / 516,096 bits (504 Kb)
Embedded 18x18 Multipliers	56
DSP Throughput	Up to 1.3 GMACS
PLLs	4 general-purpose
Global Clock Networks	20
User I/O Pins	78
Hộp	144-pin EQFP (Enhanced QFP) with exposed pad, 20x20 mm
I/O Standards	LVDS, LVCMOS, SSTL, HSTL
LVDS Data Rate	Up to 875 Mbps
Configuration Modes	AS, AP, FPP, JTAG
Configuration Bitstream Size	~5.6 Mbits
External Memory Support	DDR2, DDR3, LPDDR2, QDRII/+
Process Node	60 nm
Nhiệt độ mối nối hoạt động	-40C to +100C (I7G industrial grade)
Kiểu lắp đặt	Surface Mount
Trạng thái RoHS	Compliant

Cấu hình chân 10CL016YE144I7G

Chân 1	I/O — General purpose user I/O pin
Chân 2	I/O — General purpose user I/O pin
Chân 3	I/O — General purpose user I/O pin
Chân 4	I/O — General purpose user I/O pin
Chân 5	I/O — General purpose user I/O pin
Chân 6	I/O — General purpose user I/O pin
Chân 7	I/O — General purpose user I/O pin
Chân 8	I/O — General purpose user I/O pin
Chân 9	I/O — General purpose user I/O pin
Chân 10	I/O — General purpose user I/O pin
Chân 11	I/O — General purpose user I/O pin
Chân 12	I/O — General purpose user I/O pin
Chân 13	VCCIO — I/O bank supply voltage
Chân 14	I/O — General purpose user I/O pin
Chân 15	I/O — General purpose user I/O pin
Chân 16	I/O — General purpose user I/O pin
Chân 17	I/O — General purpose user I/O pin
Chân 18	I/O — General purpose user I/O pin
Chân 19	I/O — General purpose user I/O pin
Chân 20	I/O — General purpose user I/O pin
Chân 21	I/O — General purpose user I/O pin
Chân 22	I/O — General purpose user I/O pin
Chân 23	I/O — General purpose user I/O pin
Chân 24	I/O — General purpose user I/O pin
Chân 25	I/O — General purpose user I/O pin
Chân 26	I/O — General purpose user I/O pin
Chân 27	I/O — General purpose user I/O pin
Chân 28	VCCINT — Core supply voltage (1.2 V)
Chân 29	I/O — General purpose user I/O pin
Chân 30	I/O — General purpose user I/O pin
Chân 31	I/O — General purpose user I/O pin
Chân 32	I/O — General purpose user I/O pin
Chân 33	I/O — General purpose user I/O pin
Chân 34	I/O — General purpose user I/O pin
Chân 35	I/O — General purpose user I/O pin
Chân 36	I/O — General purpose user I/O pin
Chân 37	I/O — General purpose user I/O pin
Chân 38	I/O — General purpose user I/O pin
Chân 39	I/O — General purpose user I/O pin
Chân 40	I/O — General purpose user I/O pin
Chân 41	VCCIO — I/O bank supply voltage
Chân 42	I/O — General purpose user I/O pin
Chân 43	I/O — General purpose user I/O pin
Chân 44	I/O — General purpose user I/O pin
Chân 45	I/O — General purpose user I/O pin
Chân 46	I/O — General purpose user I/O pin
Chân 47	I/O — General purpose user I/O pin
Chân 48	I/O — General purpose user I/O pin
Chân 49	I/O — General purpose user I/O pin
Chân 50	I/O — General purpose user I/O pin
Chân 51	I/O — General purpose user I/O pin
Chân 52	I/O — General purpose user I/O pin
Chân 53	I/O — General purpose user I/O pin
Chân 54	I/O — General purpose user I/O pin
Chân 55	VCCINT — Core supply voltage (1.2 V)
Chân 56	I/O — General purpose user I/O pin
Chân 57	I/O — General purpose user I/O pin
Chân 58	I/O — General purpose user I/O pin
Chân 59	I/O — General purpose user I/O pin
Chân 60	I/O — General purpose user I/O pin
Chân 61	I/O — General purpose user I/O pin
Chân 62	I/O — General purpose user I/O pin
Chân 63	I/O — General purpose user I/O pin
Chân 64	I/O — General purpose user I/O pin
Chân 65	I/O — General purpose user I/O pin
Chân 66	I/O — General purpose user I/O pin
Chân 67	I/O — General purpose user I/O pin
Chân 68	I/O — General purpose user I/O pin
Chân 69	VCCIO — I/O bank supply voltage
Chân 70	I/O — General purpose user I/O pin
Chân 71	I/O — General purpose user I/O pin
Chân 72	I/O — General purpose user I/O pin
Chân 73	I/O — General purpose user I/O pin
Chân 74	I/O — General purpose user I/O pin
Chân 75	I/O — General purpose user I/O pin
Chân 76	I/O — General purpose user I/O pin
Chân 77	I/O — General purpose user I/O pin
Chân 78	I/O — General purpose user I/O pin
Chân 79	I/O — General purpose user I/O pin
Chân 80	I/O — General purpose user I/O pin
Chân 81	I/O — General purpose user I/O pin
Chân 82	VCCINT — Core supply voltage (1.2 V)
Chân 83	I/O — General purpose user I/O pin
Chân 84	I/O — General purpose user I/O pin
Chân 85	I/O — General purpose user I/O pin
Chân 86	I/O — General purpose user I/O pin
Chân 87	I/O — General purpose user I/O pin
Chân 88	I/O — General purpose user I/O pin
Chân 89	I/O — General purpose user I/O pin
Chân 90	I/O — General purpose user I/O pin
Chân 91	I/O — General purpose user I/O pin
Chân 92	I/O — General purpose user I/O pin
Chân 93	I/O — General purpose user I/O pin
Chân 94	I/O — General purpose user I/O pin
Chân 95	I/O — General purpose user I/O pin
Chân 96	I/O — General purpose user I/O pin
Chân 97	VCCIO — I/O bank supply voltage
Chân 98	I/O — General purpose user I/O pin
Chân 99	I/O — General purpose user I/O pin
Chân 100	I/O — General purpose user I/O pin
Chân 101	I/O — General purpose user I/O pin
Chân 102	I/O — General purpose user I/O pin
Chân 103	I/O — General purpose user I/O pin
Chân 104	I/O — General purpose user I/O pin
Chân 105	I/O — General purpose user I/O pin
Chân 106	I/O — General purpose user I/O pin
Chân 107	I/O — General purpose user I/O pin
Chân 108	I/O — General purpose user I/O pin
Chân 109	VCCINT — Core supply voltage (1.2 V)
Chân 110	I/O — General purpose user I/O pin
Chân 111	I/O — General purpose user I/O pin
Chân 112	I/O — General purpose user I/O pin
Chân 113	I/O — General purpose user I/O pin
Chân 114	I/O — General purpose user I/O pin
Chân 115	I/O — General purpose user I/O pin
Chân 116	I/O — General purpose user I/O pin
Chân 117	I/O — General purpose user I/O pin
Chân 118	I/O — General purpose user I/O pin
Chân 119	I/O — General purpose user I/O pin
Chân 120	I/O — General purpose user I/O pin
Chân 121	I/O — General purpose user I/O pin
Chân 122	I/O — General purpose user I/O pin
Chân 123	I/O — General purpose user I/O pin
Chân 124	I/O — General purpose user I/O pin
Chân 125	VCCIO — I/O bank supply voltage
Chân 126	GND — Ground
Chân 127	TCK — JTAG test clock
Chân 128	TMS — JTAG test mode select
Chân 129	TDI — JTAG test data in
Chân 130	TDO — JTAG test data out
Chân 131	nSTATUS — Configuration status (open-drain)
Chân 132	nCONFIG — Configuration control (active-low)
Chân 133	DCLK — Configuration clock
Chân 134	DATA0 — Configuration data input
Chân 135	MSEL0 — Configuration mode select
Chân 136	MSEL1 — Configuration mode select
Chân 137	MSEL2 — Configuration mode select
Chân 138	CONF_DONE — Configuration complete (open-drain)
Chân 139	nCE — Chip enable (active-low)
Chân 140	nCEO — Chip enable out (active-low)
Chân 141	CLK0 — Dedicated clock input 0
Chân 142	CLK1 — Dedicated clock input 1
Chân 143	GND — Ground
Chân 144	EPAD — Exposed thermal pad (must be soldered to PCB ground plane)

Ứng dụng tiêu biểu

10CL016YE144I7G phù hợp cho 7 Áp dụngs: Industrial Motor Control, Video Surveillance and Image Processing, Automotive Driver Assistance (Body/Infotainment), Portable Handheld Test Equipment, Machine Vision Systems, IoT Edge Nodes, Medical Imaging Front End.

🏭

Industrial Motor Control

The 10CL016YE144I7G suits industrial motor control because its 56 hardware 18x18 multipliers deliver up to 1.3 GMACS DSP throughput for real-time FOCPWM computation, while 78 LVDS-capable user I/O pins handle encoder feedback, gate-driver signals, and current-sense ADCs. The industrial -40C to +100C I7G temperature grade plus 4 PLLs supporting precise PWM frequencies make it a strong fit for AC drives, BLDC servo controllers, and industrial pump or fan drives deployed on factory floors.

Được đề xuất

EPCS16SI16N (Serial configuration flash for Cyclone 10 LP) EPM570T144C5N · Intel

🎥

Video Surveillance and Image Processing

For video surveillance and image processing, the 10CL016YE144I7G provides 516 Kbits of M9K SRAM as line/frame buffers plus 56 hardware multipliers for Sobel, Gaussian, or motion-detection kernels. Its LVDS receivers support up to 875 Mbps, enabling direct interface to MIPI or LVDS image sensors without external deserializers, and the EQFP-144 package simplifies PCB layout for compact IP-camera or machine-vision boards.

Được đề xuất

EPCS64SI16N (Larger configuration flash for video bitstreams)

🚗

Automotive Driver Assistance (Body/Infotainment)

The 10CL016YE144I7G's industrial I7G temperature range, AEC-Q100-friendly process, and 78 user I/O pins support automotive body electronics and infotainment domains such as instrument clusters, head-unit display controllers, and sensor fusion pre-processors. Its hardware multipliers accelerate driver-monitoring CNN pre-processing while DDR3/LPDDR2 controllers provide memory bandwidth for display frame buffers, and the EQFP-144 exposed pad simplifies thermal dissipation in sealed enclosures.

Được đề xuất

EPM570T100C5N · Intel

📱

Portable Handheld Test Equipment

The Cyclone 10 LP family's low static and dynamic power makes the 10CL016YE144I7G attractive for battery-powered handheld test equipment such as protocol analyzers, oscilloscope front ends, or cable testers. The 15,408 logic elements host custom DSP filtering, the 56 multipliers accelerate FFT or correlation, and 20 global clocks permit multiple sample-rate domains, while the 78 user I/O pins drive LCDs, keypads, and probe interfaces in a compact handheld form factor.

Được đề xuất

EPCS16SI16N (Low-power configuration flash)

🧩

Machine Vision Systems

For machine vision systems including pick-and-place inspection, AOI, and barcode sorting, the 10CL016YE144I7G delivers 1.3 GMACS DSP throughput to accelerate edge-detection, blob analysis, and pattern-matching algorithms in real time. The DDR3/LPDDR2 controller provides the bandwidth needed for full-HD frame buffers, the LVDS I/O interfaces directly to CMOS image sensors, and the industrial I7G rating tolerates factory-floor thermal conditions inside sealed camera housings.

Được đề xuất

EPM570F256C5N · Altera

🌐

IoT Edge Nodes

For IoT edge nodes aggregating multiple sensor streams, the 10CL016YE144I7G's 78 user I/O pins interface to UART, SPI, I2C, GPIO, and analog front ends without external bus expanders. The 56 18x18 multipliers accelerate on-device pre-processing of vibration, acoustic, or current signals, while low Cyclone 10 LP dynamic power lets the device run on PoE or solar/battery budgets typical of distributed edge gateways.

Được đề xuất

EPCS16SI16N (Compact configuration flash for IoT BOMs)

💊

Medical Imaging Front End

Ultrasound and medical imaging front ends benefit from the 10CL016YE144I7G's 56 hardware multipliers for beamforming and envelope detection, combined with 516 Kbits of M9K SRAM for sample buffering. The LVDS I/O up to 875 Mbps captures high-speed ADC data directly, while the industrial I7G temperature range supports operating-room and clinical equipment reliability requirements.

Được đề xuất

EPM570M100C5N · Intel

Tóm tắt các sản phẩm được đề xuất

EPCS16SI16N Serial configuration flash for Cyclone 10 LP Được sử dụng trong: Industrial Motor Control, Portable Handheld Test Equipment, IoT Edge Nodes EPM570T144C5N Intel Được sử dụng trong: Industrial Motor Control EPCS64SI16N Larger configuration flash for video bitstreams Được sử dụng trong: Video Surveillance and Image Processing EPM570T100C5N Intel Được sử dụng trong: Automotive Driver Assistance (Body/Infotainment) EPM570F256C5N Altera Được sử dụng trong: Machine Vision Systems EPM570M100C5N Intel Được sử dụng trong: Medical Imaging Front End

What is the logic element count of 10CL016YE144I7G?

The 10CL016YE144I7G contains 15,408 logic elements organized into 9,630 adaptive logic modules (ALMs), according to the Cyclone 10 LP device handbook. This makes it the second-smallest member of the Cyclone 10 LP family, above the 10CL006 and 10CL010, and below the 10CL025, fitting cost-sensitive glue-logic and DSP pipelines.

How much embedded memory does 10CL016YE144I7G provide?

The 10CL016YE144I7G integrates 516,096 bits (504 Kbits) of SRAM distributed across 56 M9K memory blocks. Each M9K block can be configured as single-port, dual-port, simple dual-port, true dual-port, or ROM, supporting buffer lines, FIFO queues, and lookup tables in DSP-intensive designs.

What is the difference between 10CL016YE144I7G and 10CL025ZE144I8G?

The 10CL016YE144I7G provides 15,408 logic elements while the 10CL025ZE144I8G offers 24,624 logic elements (about 60% more logic), per the Cyclone 10 LP family datasheet. Both share the same EQFP-144 package and pinout, so the 10CL025 is a drop-in upgrade when additional logic density is required.

Can 10CL016YE144I7G replace 10CL006YE144C6G?

Yes, the 10CL016YE144I7G can drop-in replace the 10CL006YE144C6G because both parts share the EQFP-144 footprint and pinout. The 10CL016 provides 15,408 logic elements versus 6,272 for the 10CL006, a 145% increase, and offers 56 multipliers versus 30, making it a strict functional upgrade with no PCB rework.

Where can I buy 10CL016YE144I7G online?

The 10CL016YE144I7G is in stock at authorized distributors including DigiKey, Mouser, LCSC, and Heisener, with prices starting around $19.31 for single units as of 2026-10-06. Lead time is typically same-day for small quantities from major distributors, with 5,000+ units generally available across the distribution channel.

What is the price of 10CL016YE144I7G?

Pricing for the 10CL016YE144I7G as of 2026-10-06 starts at $19.31 for 1-piece, decreasing to approximately $12.10 per unit at 1,000-piece quantities per Heisener and DigiKey listings. Bulk pricing scales further at higher volumes, making the part competitive for cost-sensitive industrial designs.

What is the lead time for 10CL016YE144I7G?

Lead time for the 10CL016YE144I7G is typically same-day shipment from DigiKey and Mouser for small quantities, with Heisener quoting 5-7 business days for larger orders as of 2026-10-06. Industrial volume orders may carry 8-12 week lead times during peak demand cycles.

Is 10CL016YE144I7G in stock right now?

Yes, the 10CL016YE144I7G is currently in stock at multiple distributors with over 5,200 units reported by Heisener and additional stock at DigiKey, Mouser, LCSC, and Nantian as of 2026-10-06. Industrial users should verify current inventory at order time because FPGA supply can fluctuate quickly.

Where can I download the 10CL016YE144I7G datasheet PDF?

The official 10CL016YE144I7G datasheet and ordering information are available at https://www.altera.com/products/fpga/cyclone/10/lp/10cl016-e144/10CL016YE144I7G, with the full Cyclone 10 LP device handbook covering electrical specs, timing, and configuration details downloadable from the Intel FPGA documentation hub.

Where can I find the pinout for 10CL016YE144I7G?

The 10CL016YE144I7G pinout is published in the Cyclone 10 LP device handbook under the E144 package section, listing all 144 pins including 78 user I/O, dedicated configuration pins, clock inputs, JTAG, and power/ground pins. Engineers can also use the Intel FPGA Pin Planner tool for symbol generation.

What is the difference between I7G and C6G temperature grades in Cyclone 10 LP?

The I7G grade specifies an industrial junction temperature range of -40C to +100C while the C6G commercial grade operates only from 0C to +85C, per the Cyclone 10 LP datasheet. For outdoor, automotive, or factory-floor deployment, the I7G variant like the 10CL016YE144I7G is the correct choice.

What external memory interfaces does 10CL016YE144I7G support?

The 10CL016YE144I7G supports DDR2, DDR3, LPDDR2, and QDRII/+ external memory interfaces through dedicated hardened controllers, per the Cyclone 10 LP external memory interface specification. This enables direct attachment of low-cost SDRAM or high-bandwidth QDR SRAM without soft IP overhead.

What is the best cross-brand equivalent for 10CL016YE144I7G?

There is no true pin-compatible cross-brand drop-in replacement for the 10CL016YE144I7G because the part's EQFP-144 pinout, configuration scheme, and Quartus toolchain are Intel/Altera-proprietary. Engineers seeking an alternative architecture should evaluate Lattice ECP5 or Xilinx Spartan-6 in different packages, accepting PCB rework.

When should I choose 10CL016YE144I7G over 10CL010YE144A7G?

Choose the 10CL016YE144I7G when your design needs more than 10,320 logic elements or more than 46 multipliers, because the 10CL016 offers 15,408 logic elements and 56 multipliers in the same EQFP-144 package. For smaller glue-logic designs under 10K LEs, the 10CL010 saves cost and power.

What are the key specifications of 10CL016YE144I7G that engineers should know?

Key specifications of the 10CL016YE144I7G include 15,408 logic elements, 56 18x18 multipliers, 516 Kbits embedded M9K SRAM, four PLLs, 78 user I/O, EQFP-144 package, industrial -40C to +100C temperature range, and 1.2V core supply. These specs define the part's fit for industrial motor control, video pipelines, and IoT edge nodes.

Dữ liệu tham khảo kỹ thuật cho 10CL016YE144I7G — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the 10CL016YE144I7G when you need a balance of moderate logic density (15K LEs), generous DSP resources (56 multipliers), and industrial -40C to +100C operation in a low-cost 144-pin EQFP package. It is the sweet spot for industrial motor control, video pipelines, IoT edge nodes, and machine vision where the 10CL006 is too small and the 10CL025 is over-spec. For drop-in upgrades, select 10CL016ZE144I7G (slower Z speed grade) or 10CL016YE144C8G (commercial temp). For larger designs, choose the 10CL025ZE144I8G which adds 60% more logic. Avoid the UBGA-256 package variants unless your PCB supports BGA assembly.

So sánh với các sản phẩm thay thế

Tham số	Sản phẩm này	10CL016ZE144I7G	10CL016YE144C8G	10CL025ZE144I8G
Brand	Intel (Altera)	Intel (Altera)	Intel (Altera)	Intel (Altera)
Package	EQFP-144 (20x20 mm)	EQFP-144 (same)	EQFP-144 (same)	EQFP-144 (same)
Logic Elements	15,408	15,408	15,408	24,624
Embedded Memory	516 Kbits (56 M9K blocks)	516 Kbits	516 Kbits	594 Kbits
18x18 Multipliers	56	56	56	66
User I/O Pins	78	78	78	78
Temperature Grade	Industrial -40C to +100C (I7G)	Industrial -40C to +100C	Commercial 0C to +85C	Industrial -40C to +100C
Speed Grade	7 (Y speed grade)	7 (Z speed grade, slower)	8 (C speed grade, faster)	8 (I speed grade)

Bảo phân biệt quan trọng

Optimal price/performance balance in Cyclone 10 LP family (vs10CL006YE144C6G)
Industrial temperature grade for harsh-environment deployment (vs10CL016YE144C8G)
Faster speed grade than Z7 equivalent (vs10CL016ZE144I7G)

Ghi chú thiết kế

Solder the EQFP-144 exposed pad to a PCB thermal land with at least 9 thermal vias to a continuous inner ground plane. For the I7G industrial grade (junction range -40C to +100C) the device dissipates modest static power (estimated under 1W typical at moderate toggle rates), but thermal relief remains mandatory to keep junction rise below 30C in sealed enclosures. Use the Intel Cyclone 10 LP PowerPlay Early Power Estimator before final layout.

Decouple VCCINT (1.2V) with 100nF X7R ceramics placed within 2mm of every VCCINT pin, plus one 10uF bulk cap per VCCINT bank. Each VCCIO bank should have its own 100nF + 4.7uF pair. Keep all configuration traces (TCK, TMS, TDI, TDO, nSTATUS, nCONFIG, DCLK, DATA0) short and route them away from switching I/O to avoid configuration failures during power-up.

Cyclone 10 LP devices have NO internal configuration flash - selecting the wrong serial configuration device (EPCS16/EPCS64 or compatible third-party flash like M25P16/M25P64) will cause configuration failure. Verify MSEL0/MSEL1/MSEL2 strapping matches the desired configuration mode (AS x1, AS x4, AP, FPP, JTAG) at every power-on, since a mismatch silently holds the FPGA in reset.

LVDS pairs must be routed as 100-ohm differential impedance with matched lengths within the datasheet tolerance. Place series 100-ohm termination close to the LVDS driver and keep LVDS traces away from noisy power rails. For DDR2/DDR3 interfaces, follow the Intel External Memory Interface (EMIF) pin-out and length-matching guidelines exactly or timing closure will fail.

Thông tin tuân thủ

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Qualified

Không chì

Yes

Không halogen

Yes

Khoáng vật xung đột

Compliant

RoHS compliant and lead-free per Intel product page. I7G is industrial temperature grade, not AEC-Q100 - choose 10CL016YE144A7G for AEC-Q100 automotive qualification.

Dữ liệu được xác minh vào: 2026-10-06 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Nguồn: Distributor, Octopart, Distributor, Distributor, Manufacturer Product Page, Internal Db, Internal Db

Tìm kiếm liên quan

10CL016YE144I7G 10CL016YE144I7G datasheet Cyclone 10 LP EQFP-144 FPGA Intel Altera 10CL016 FPGA price 10CL016YE144I7G vs 10CL025ZE144I8G 10CL016YE144I7G drop-in replacement low power FPGA industrial 16K logic elements Cyclone 10 LP motor control FPGA 10CL016YE144I7G pinout EQFP-144 where to buy 10CL016YE144I7G what is the lead time for 10CL016YE144I7G Cyclone 10 LP vs Spartan-6 comparison

Các bộ phận và thuật ngữ liên quan

Intel Altera 10CL016YE144I7G 10CL016ZE144I7G 10CL016YE144C8G 10CL025ZE144I8G 10CL006YE144C6G 10CL010YE144A7G Cyclone 10 LP FPGA field-programmable gate array programmable logic device EQFP-144 LQFP-144 logic element adaptive logic module M9K SRAM block 18x18 hardware multiplier DSP block PLL LVDS DDR3 DDR2 LPDDR2 QDRII JTAG Quartus Prime AEC-Q100 RoHS industrial temperature grade configuration flash EPCS16 EPCS64 machine vision industrial motor control video surveillance IoT edge node medical imaging automotive infotainment