Texas Instruments

ADS8341EB - 16-Bit 4-Channel 100 kHz ADC | Texas Instruments

MPN: ADS8341EB ✓ Hoạt động
2.7 V to 5 V Vdss 16-pin SSOP Package
MOQ: 1 |

ADS8341EB Tóm tắt

Texas Instruments ADS8341EB is a 16-bit, 4-channel serial-output sampling analog-to-digital converter with a maximum conversion rate of 100 kHz, configured for either four single-ended or two differential inputs. It is packaged in a 16-pin SSOP and operates from a 2.7 V to 5 V supply range. The converter delivers 86 dB SINAD and 0.0092% linearity error for precision signal-acquisition systems.

A sampling ADC is a semiconductor that samples an analog voltage at a controlled interval and converts each sample into a digital code. The ADS8341 belongs to the SAR ADC family, where a successive-approximation conversion architecture produces a digital result through a sequence of internal comparisons. Its serial interface integrates directly with microcontrollers, DSPs, and programmable logic while minimizing external data-bus wiring.

The four input channels can be arranged as four single-ended inputs or two differential inputs. This flexibility supports sensor interfaces, process-control instrumentation, and measurement systems in which common-mode noise rejection is important. The 100 kHz conversion rate provides sufficient throughput for many industrial, communications, and control applications, while 16-bit resolution preserves fine detail in slow or precision-oriented measurements.

According to the Texas Instruments product documentation, typical power dissipation is 8 mW with a 5 V supply at a 100 kHz throughput rate. The device uses a synchronous serial interface, allowing conversion data to be transferred in a predictable clocked sequence. Its 86 dB SINAD specification quantifies signal-to-noise plus distortion performance and is the key figure for assessing usable conversion accuracy in the intended analog bandwidth.

Typical applications include factory process monitoring, portable measurement equipment, industrial data acquisition, and embedded sensor conditioning. Differential operation is particularly useful when the source is centered around a common-mode voltage or when cable noise could otherwise influence the measurement. The low power consumption also suits compact systems in which converter throughput must be balanced against thermal and battery requirements.

Design the input network so that source impedance, settling time, and the acquisition interval meet the converter’s sampling requirements. Use a stable reference voltage, place input and reference decoupling capacitors close to their pins, and route the serial clock and data signals away from noisy switching nodes. Confirm timing for CS, SCLK, and data-valid signals against the interface timing in the manufacturer datasheet.

This page consolidates the key electrical limits, channel configurations, package information, interface considerations, and drop-in replacement guidance for the ADS8341EB. It also adds practical selection and PCB guidance so engineers can evaluate the converter alongside pin-compatible family options before committing to a design.

Bộ thay thế dễ dàng lắp đặt cho ADS8341EB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADS8341EB (cùng hình factor và footprint) — khác nhau ở Number of Input Channels, Package, Resolution, RoHS Status, SINAD.

Texas Instruments
Number of Input Channels: 4 single-ended / 2 differential
Package: SSOP-16 (QSOP-16)
Resolution: 12 bits (also 8-bit mode)

ADS7841E/2K5G4

✅ Drop-In
Texas Instruments
📦 16-pin SSOP
12 bits (also 8-bit mode) · 4 single-ended / 2 differential · SAR (Successive Approximation Register) · 200 kHz (max) · 3.75 us · ±1 LSB · ±1 LSB · None (12-bit guaranteed)

Liên hệ để biết giá

Xem tài liệu →

ADS8341EB Tỷ lệ tối đa & tính chất điện

Converter Type Successive-approximation sampling ADC
Độ phân giải 16 bit
Number of Input Channels 4 channels
Input Configuration 4 single-ended or 2 differential inputs
Maximum Conversion Rate 100 kHz
Output Interface Synchronous serial interface
SINAD 86 dB
Linearity Error 0.0092%
Supply Voltage Range 2.7 V to 5 V
Typical Power Dissipation 8 mW at 5 V supply and 100 kHz throughput
Khoảng nhiệt độ hoạt động -40°C to +85°C
Hộp 16-pin SSOP
Kiểu lắp đặt Surface mount
Analog Input Type Single-ended or differential
Trạng thái RoHS unknown

Hướng dẫn cấu hình chân ADS8341EB 16-pin ssop

Cấu hình chân cho ADS8341EB (16-pin ssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 16-pin ssop cho ADS8341EB

Không có dữ liệu chân cụ thể sẵn có cho ADS8341EB.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADS8341EB phù hợp cho 6 Áp dụngs: Industrial Sensor Acquisition, Process Control Monitoring, Portable Measurement Equipment, Instrumentation and Data Loggers, Communication Receive-Path Monitoring, Automated Test Equipment.

🏭

Industrial Sensor Acquisition

The ADS8341EB suits multi-sensor industrial acquisition because it combines four single-ended inputs with 16-bit conversion resolution and throughput up to 100 kHz. A controller can select a channel, acquire the analog value, and transfer the result through the synchronous serial interface without requiring four separate converters. The 86 dB SINAD and 0.0092% linearity error are important when the measured quantity is smaller than the full-scale signal. Use differential mode when two sensors or a sensor plus reference share the same conversion network. Front-end protection, guarding, and a stable reference are still required when sensors are exposed to industrial electrical noise or ground-potential differences.

⚡

Process Control Monitoring

The ADS8341EB fits closed-loop process monitoring where pressure, temperature, flow, or position signals must be digitized with repeatable performance. Its conversion rate of up to 100 kHz provides a substantial margin above slow industrial control loops, while four channels permit related variables to be measured with one converter. Differential input capability can reduce common-mode pickup when sensor wiring is longer or shares ground paths with actuators. The 16-bit code width and 86 dB SINAD support precise control decisions, although the complete loop must also account for sensor accuracy, reference stability, isolation, filtering, and control-loop timing.

📱

Portable Measurement Equipment

The ADS8341EB is useful in handheld or compact measurement equipment because it provides four channels at 16-bit resolution while typically dissipating 8 mW at a 5 V supply and 100 kHz throughput. Its 2.7 V to 5 V operating range supports multiple embedded supply configurations. Low channel count per package also reduces board area compared with four separate converters. For battery-powered products, verify the actual conversion rate, digital interface activity, reference circuit, and analog front-end current because the typical 8 mW figure describes one defined operating condition. Low-power sleep modes, if used, should be confirmed in the datasheet before they are relied upon in an energy budget.

🖥️

Instrumentation and Data Loggers

The ADS8341EB works well in instrumentation and data loggers that need accurate conversion of several slowly changing or moderate-speed analog signals. Four single-ended channels can capture thermocouple conditioning outputs, bridge signals, potentiometer positions, or auxiliary measurements without multiplying the converter count. Differential operation is appropriate when a bridge or differential sensor is centered around a common-mode voltage. The synchronous serial interface reduces pin count and supports deterministic communication with a microcontroller or DSP. For logged data, ensure that the selected sample interval satisfies both the 100 kHz conversion capability and the required acquisition time for the source impedance.

🌐

Communication Receive-Path Monitoring

The ADS8341EB can monitor received or transmitted signal levels in communication equipment when four independent analog measurement points must be digitized. Its 100 kHz conversion rate is suitable for supervisory envelope, supply, temperature, and calibration measurements rather than direct wideband waveform capture. The 16-bit resolution and 86 dB SINAD are useful when monitoring small changes around a large operating point. Use differential channels where available to suppress common-mode noise. The serial interface enables transfer to a baseband processor, but signal bandwidth, aliasing, input bandwidth, and filtering must be evaluated separately from the nominal conversion rate.

🔧

Automated Test Equipment

The ADS8341EB can serve as the measurement converter in automated test equipment that evaluates several analog nodes during board characterization. Four channels enable concurrent sampling or rapid channel sequencing, while 16-bit resolution supports calibration and fault-detection tasks with fine code widths. The 100 kHz throughput supports test systems that need frequent measurements rather than ultra-high-rate waveform analysis. Differential input mode improves measurement integrity for balanced fixtures and low-level signals. Test engineers should characterize offset, gain, linearity, and reference behavior over the intended temperature range, because converter resolution alone does not establish complete instrument accuracy.

Tóm tắt các sản phẩm được đề xuất

ADS8341EB Texas Instruments Được sử dụng trong: Industrial Sensor Acquisition, Process Control Monitoring, Portable Measurement Equipment, Instrumentation and Data Loggers, Communication Receive-Path Monitoring, Automated Test Equipment ADS7841 Pin-compatible two-channel ADC family option Được sử dụng trong: Industrial Sensor Acquisition, Process Control Monitoring, Portable Measurement Equipment, Instrumentation and Data Loggers, Communication Receive-Path Monitoring, Automated Test Equipment
What are the key specifications of ADS8341EB that engineers should know?
The ADS8341EB is a 16-bit, four-channel sampling ADC that supports four single-ended or two differential inputs, converts at up to 100 kHz, and uses a synchronous serial interface. Texas Instruments specifies 86 dB SINAD, 0.0092% linearity error, and a 2.7 V to 5 V operating range. The device is packaged in a 16-pin SSOP and typically dissipates 8 mW with a 5 V supply at the maximum stated throughput.
What is the operating voltage of ADS8341EB?
The ADS8341EB operates from 2.7 V to 5 V. This range allows the converter to work with both 3.3 V and 5 V systems while covering common embedded, industrial, and instrumentation supply rails. According to the Texas Instruments product documentation, typical power dissipation is 8 mW at a 5 V supply and 100 kHz throughput rate. Input and reference levels must also remain compatible with the selected supply configuration.
How many input channels does ADS8341EB have?
The ADS8341EB provides four analog input channels and can operate as four single-ended inputs or two differential inputs. According to the Texas Instruments ADS8341 datasheet, this dual arrangement allows the same converter to support multiple unipolar measurements or two differential measurements. Differential operation is useful when rejecting common-mode voltage and noise on sensor or instrumentation signals.
What is the conversion rate of ADS8341EB?
The ADS8341EB supports a maximum conversion rate of 100 kHz. According to the Texas Instruments product documentation, the converter is a 4-channel, 16-bit sampling ADC with a synchronous serial interface. This throughput is suitable for many process-control, sensor-acquisition, communications, and industrial measurement tasks, while the required acquisition and serial-transfer timing must be observed for accurate results.
Where can I download the ADS8341EB datasheet PDF?
The official ADS8341 datasheet and supporting product information are available through the Texas Instruments ADS8341 product page at https://www.ti.com/product/ADS8341. The page provides the manufacturer’s electrical characteristics, ordering information, application details, and package documentation. Use the ADS8341 family datasheet for the ADS8341EB because the EB designation identifies a specific lead-free ordering configuration within that family.
Where can I find the ADS8341EB pinout?
The ADS8341EB pin assignment is shown in the pin-configuration and pin-description tables in the Texas Instruments ADS8341 datasheet. The converter uses a 16-pin SSOP, so the diagram includes every physical lead and its associated analog, reference, digital, and supply function. Use that diagram when assigning PCB nets and when checking compatibility with any proposed replacement rather than inferring pin functions from package position alone.
Is ADS8341EB suitable for high-precision sensor measurement?
The ADS8341EB is suitable for precision single-ended and differential sensor measurement because it combines 16-bit resolution with 86 dB SINAD and 0.0092% linearity error. Its four-channel configuration can reduce the number of converters needed in multi-sensor systems. According to the Texas Instruments product documentation, its differential mode supports rejecting common-mode disturbances that could otherwise influence precision measurements.
Does ADS8341EB need a heatsink?
The ADS8341EB generally does not require a dedicated heatsink because Texas Instruments specifies typical power dissipation of 8 mW at a 5 V supply and 100 kHz throughput rate. Layout should still provide thermal copper around the SSOP and unobstructed airflow. Actual dissipation depends on supply voltage, conversion activity, and operating temperature, so thermal analysis should use the highest expected operating condition.
What is the difference between ADS8341EB and ADS7841?
The principal documented difference is the input capability: Texas Instruments describes ADS8341 as a four-channel converter supporting four single-ended or two differential inputs, while ADS7841 is a two-channel single-ended converter. The ADS8341 datasheet identifies ADS7841 as pin-for-pin compatible, but engineers should still verify the reference, supply, acquisition-time, and interface requirements of the specific board and operating mode before using it as a replacement.
ADS8341EB vs ADS8344E - which is better for a 16-bit application?
ADS8341EB is the better choice when the design needs four channels, two differential inputs, and a 100 kHz conversion rate. ADS8344E is a separate 16-bit serial-output ADC whose input and channel characteristics differ, so it should not be assumed to be a direct replacement. Texas Instruments lists typical ADS8344E power dissipation as 10 mW at 100 kHz with a 5 V supply, compared with 8 mW for ADS8341EB under the stated condition.
When should I choose ADS8341EB over a lower-channel ADC?
Choose ADS8341EB when a design needs four single-ended channels, two differential channels, 16-bit resolution, and conversion throughput up to 100 kHz. A lower-channel ADC may be appropriate when fewer analog inputs are required, but ADS8341EB can consolidate multiple sensors into one converter. Its differential mode is also valuable when source signals require common-mode rejection and the system must preserve low-noise measurement performance.
Is ADS8341EB suitable for industrial data acquisition?
The ADS8341EB fits many industrial data-acquisition systems because it combines a wide 2.7 V to 5 V supply range, four input channels, differential-input capability, and a 100 kHz conversion rate. Its 86 dB SINAD specification supports precision-oriented acquisition. For factory environments, use suitable input protection, shielding, grounding, and isolation where the measured signal or ground path could expose the converter to hazardous voltages.
Where to buy ADS8341EB online?
The ADS8341EB can be requested through the Request a Quote form on this page for current commercial availability, lot traceability, and order handling. The Texas Instruments product page at https://www.ti.com/product/ADS8341 provides the authoritative family documentation and ordering information. Quote responses should confirm the exact ADS8341EB ordering code, SSOP-16 package, lead-free status, delivery schedule, and any required date-code controls.
What is the price of ADS8341EB?
Current ADS8341EB pricing and available quantity breaks are handled through the Request a Quote form on this page. The quote should reflect the exact ordering code, package, production volume, delivery schedule, and traceability requirements. Because pricing and inventory can change with market conditions and order configuration, use the returned quotation rather than relying on a stale historical price reference.
What is the lead time for ADS8341EB and is it in stock?
Request the current lead time, stock position, and minimum order quantity through the Request a Quote form on this page. Texas Instruments lists the ADS8341 family as an active product, but family activity does not guarantee immediate availability for every order quantity. The quotation should confirm manufacturing allocation, package-specific inventory, authorized distribution status, and the planned delivery date for the requested quantity.
What can replace ADS8341EB?
ADS7841 is the clearest documented replacement candidate because the Texas Instruments ADS8341 datasheet states that ADS8341 is pin-for-pin compatible with ADS7841. The functional trade-off is that ADS7841 provides two single-ended channels rather than ADS8341’s four-channel single-ended or two-channel differential configuration. Before substitution, verify reference voltage, acquisition time, conversion timing, electrical limits, and the required channel configuration on the target PCB.
Is ADS8341EB the same as ADS8344E?
No. ADS8341EB and ADS8344E are different Texas Instruments 16-bit serial-output ADCs with different channel and input characteristics, so they are not interchangeable without a PCB-level compatibility review. ADS8341EB supports four single-ended or two differential inputs at up to 100 kHz. ADS8344E has a different input architecture and is cited as having 10 mW typical dissipation at 100 kHz and 5 V, versus 8 mW for ADS8341EB.

Dữ liệu tham khảo kỹ thuật cho ADS8341EB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose ADS8341EB when the design requires 16-bit resolution, up to 100 kHz conversion throughput, and the flexibility of four single-ended or two differential analog inputs. It is particularly appropriate for multi-sensor acquisition, process monitoring, portable instrumentation, and automated test equipment. ADS7841 is the relevant drop-in family alternative when only two single-ended inputs are required and the board can be checked for reference, timing, and acquisition compatibility. Other 16-bit ADC families should not be treated as direct replacements without a complete pin, package, interface, voltage, and performance review. For very high sample rates, wide analog bandwidth, or advanced integrated reference and converter functions, specify a device whose architecture and acquisition timing match those requirements rather than assuming that all 16-bit serial ADCs are interchangeable.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADS7841
Brand Texas Instruments Texas Instruments
Package 16-pin SSOP 16-pin SSOP
Input Configuration 4 single-ended or 2 differential inputs 2 single-ended inputs

Bảo phân biệt quan trọng

  • Broader analog input configuration than ADS7841 (vsADS7841)
  • Specified precision performance (vsADS7841)
  • Defined operating and thermal benchmark (vsADS7841)

Ghi chú thiết kế

Treat channel count as a functional as well as a pin-level decision. ADS8341EB supports four single-ended or two differential inputs, whereas ADS7841 is a two-channel single-ended device. A board that routes all four ADS8341 channels will not function equivalently with ADS7841 even though the family is described as pin-for-pin compatible. Create the schematic around the required input mode and verify unused-channel connections against the manufacturer pin-description table.

Place the reference bypass capacitor and analog input filtering components close to their associated SSOP pins. Route the synchronous serial clock, chip select, and data paths away from switching nodes and power inductors, and use a continuous ground reference beneath the device where the PCB stackup permits it. Differential inputs should use symmetrical routing and matched component placement to limit conversion of common-mode noise into differential error.

Verify source impedance and acquisition time before selecting the conversion interval. The ADC can operate at up to 100 kHz, but the external network driving each input must settle to the required accuracy within that interval. Keep the reference voltage stable, decouple it locally, and confirm the SCLK, CS, and data-valid timing in the manufacturer datasheet. These checks are especially important when the analog source has high impedance or a long acquisition interval.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The ADS8341 family documentation does not establish all requested compliance attributes. The EB ordering suffix should be checked against the current manufacturer ordering information when lead-free status is required.

Tìm kiếm liên quan

ADS8341EB datasheet ADS8341 datasheet pdf ADS8341EB pinout ADS8341EB specifications ADS8341EB 16 bit ADC ADS8341EB 100 kHz ADS8341EB SSOP-16 Texas Instruments ADS8341EB ADS8341EB application circuit ADS8341EB equivalent ADS8341EB replacement ADS8341EB vs ADS7841 ADS8341EB price ADS8341EB stock ADS8341EB lead time

Các bộ phận và thuật ngữ liên quan

Texas Instruments ADS8341EB ADS8341 ADS7841 successive-approximation register SAR ADC sampling ADC analog-to-digital converter ADC synchronous serial interface 16-bit resolution single-ended input differential input 100 kHz conversion rate 86 dB SINAD 0.0092% linearity error 2.7 V to 5 V supply 16-pin SSOP surface-mount package industrial data acquisition process control instrumentation reference voltage common-mode rejection Texas Instruments ADS8341 datasheet
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ