Texas Instruments

ADS830E/2K5 - 8-Bit 60 MSPS ADC | Texas Instruments

MPN: ADS830E/2K5 ✓ Hoạt động
+5 V Vdss 20-pin SSOP Package
MOQ: 1 |

ADS830E/2K5 Tóm tắt

The Texas Instruments ADS830E/2K5 is an 8-bit, 60 MSPS pipelined CMOS analog-to-digital converter with single-ended or differential input, selectable internal or external reference, and a 20-pin SSOP package. It operates from a single +5 V supply and consumes 170 mW, making it suitable for compact, high-speed signal-processing systems.

An ADC is a data-converter IC that samples an analog voltage and converts it into a digital code for processing, storage, or transmission. The ADS830 belongs to the pipelined ADC hierarchy, where internal stages operate concurrently to achieve a high sampling rate. Its 8-bit quantizer represents each sampled analog level with eight bits, providing a compact data path for video digitization, medical imaging, communications, and instrumentation.

Principal specifications include a maximum sampling frequency of 60 MSPS, 49.5 dB signal-to-noise ratio, 0.2 LSB differential nonlinearity, and 170 mW power consumption. The analog input can be single-ended or differential, while the input range is programmable to support different signal amplitudes. An internal reference option reduces external circuitry, although an external reference can be selected when system-level accuracy requires it.

The converter uses a high-bandwidth track-and-hold circuit preceding its pipelined 8-bit quantizer. This architecture supports rapid conversion rates and provides separate single-ended or differential operating modes. Texas Instruments describes the device as pin-for-pin compatible with the 8-bit, 80 MSPS ADS831, allowing a board to support a faster sampling option without changing its SSOP-20 footprint.

Typical applications include medical-imaging signal chains, video digitization, communications equipment, and test instrumentation. The 60 MSPS rate is appropriate for digitizing intermediate-frequency or sampled-video waveforms, while differential operation can improve rejection of common-mode noise in balanced analog circuits. The single +5 V supply also simplifies integration with conventional +5 V digital processing logic.

Design the input network for the selected single-ended or differential range and account for the ADC input bandwidth when placing the sampling circuit. Reference and supply decoupling should be placed close to their associated pins, while high-speed routing requires short, controlled-impedance connections and a quiet return path. Confirm timing for the parallel output interface against the acquisition clock and downstream logic.

This page combines the manufacturer specifications, drop-in compatibility information, application guidance, and engineering design notes in one searchable reference. The comparison table and selection guide clarify when the 60 MSPS ADS830E/2K5 or the faster pin-compatible ADS831 is the appropriate choice for a new design.

Bộ thay thế dễ dàng lắp đặt cho ADS830E/2K5 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADS830E/2K5 (cùng hình factor và footprint) — khác nhau ở Package, Architecture, Resolution, Operating Temperature Range, RoHS Status.

Texas Instruments
Package: 20-pin SSOP (DB)
Architecture: Pipelined CMOS
Resolution: 8 bits
Texas Instruments
Package: 10-VSON (DRC) 3x3 mm
Architecture: SAR
Resolution: 16 bit
Texas Instruments
Package: SOIC-28 (DW) wide-body, 7.50 mm
Architecture: Pipelined CMOS
Resolution: 10 bits
Texas Instruments
Package: SOIC-28 (DW) wide-body, 7.50 mm
Architecture: Pipelined CMOS
Resolution: 10 bits

ADS8318IDRCR

✅ Drop-In
Texas Instruments
📦 20-pin SSOP
16 bit · 500 kSPS · Unipolar Differential · 1 · SAR · 4.5 V to 5.5 V · 1.4 us · Serial (SPI/QSPI/MICROWIRE-compatible)

Liên hệ để biết giá

Xem tài liệu →

ADS830E/2K5 Tỷ lệ tối đa & tính chất điện

ADC Resolution 8 bit
Maximum Sampling Rate 60 MSPS
Architecture Pipelined CMOS ADC
Number of Input Channels 1 channel
Input Configuration Single-ended or differential
Programmable Input Range 1 Vpp or 2 Vpp
Single-Ended Input Range 1.5 V to 3.5 V
Signal-to-Noise Ratio 49.5 dB
Differential Nonlinearity 0.2 LSB
Power Consumption 170 mW
Điện áp cung cấp +5 V
Reference Internal or external
Quantizer Resolution 8 bit
Khoảng nhiệt độ hoạt động -40 C to +85 C
Hộp 20-pin SSOP
Output Interface Parallel

Hướng dẫn cấu hình chân ADS830E/2K5 20-pin ssop

Cấu hình chân cho ADS830E/2K5 (20-pin ssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 20-pin ssop cho ADS830E/2K5

Không có dữ liệu chân cụ thể sẵn có cho ADS830E/2K5.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADS830E/2K5 phù hợp cho 6 Áp dụngs: Medical Imaging Signal Acquisition, Video Digitization, Communications IF Signal Processing, Test and Measurement Instrumentation, Industrial Data Acquisition, Portable Diagnostic Equipment.

💊

Medical Imaging Signal Acquisition

The ADS830E/2K5 suits medical-imaging signal acquisition stages that require compact 8-bit digitization at up to 60 MSPS. Its 49.5 dB SNR and 0.2 LSB differential nonlinearity support accurate conversion of sampled analog waveforms, while the 20-pin SSOP package reduces board area. In a typical signal chain, an amplifier drives the single-ended or differential ADC input and the parallel output connects to a digital acquisition controller. Differential operation is useful when the source has balanced geometry or when rejecting common-mode noise is important. The 170 mW power specification also helps limit thermal loading in dense instrumentation. System designers must still validate signal bandwidth, isolation requirements, clock timing, and the medical-device standards applicable to the completed equipment.

📺

Video Digitization

The ADS830E/2K5 can digitize video-related analog signals at up to 60 MSPS when 8-bit resolution and a parallel output are sufficient. Its pipeline architecture supports repetitive sampling, and the programmable 1 Vpp or 2 Vpp input range allows the analog front end to be scaled to the source amplitude. A practical implementation places the video amplifier or attenuator close to the ADC, followed by short traces to the clock and parallel data outputs. The 170 mW operating power is particularly helpful in compact camera and monitor electronics. Before implementation, verify the required pixel clock, analog bandwidth, settling behavior, output timing, and whether the faster 80 MSPS ADS831 would provide a useful acquisition-time margin.

🌐

Communications IF Signal Processing

The ADS830E/2K5 is appropriate for digitizing intermediate-frequency or other communications waveforms when an 8-bit converter operating at 60 MSPS meets the system requirement. The selectable single-ended or differential input supports both simple source interfaces and balanced RF downconverter outputs, while differential operation can reduce common-mode pickup. Its internal-reference option simplifies the basic analog subsystem, and the external-reference option permits clock- or system-level reference architecture. The parallel interface allows direct connection to FPGA or digital logic when timing is correctly aligned. Designers should calculate the required Nyquist margin, inspect harmonic and distortion behavior at the operating signal level, and provide controlled-impedance routing for clocks and data to avoid degrading the available 49.5 dB SNR.

🔧

Test and Measurement Instrumentation

The ADS830E/2K5 can serve as the sampling front end in waveform, communication, or automated test equipment when 8-bit resolution at 60 MSPS is sufficient. The fast track-and-hold stage captures repetitive inputs, while selectable differential operation helps reject offset and common-mode interference in instrumented systems. A practical design routes the measured signal through an attenuator or amplifier into the ADC, then synchronizes the parallel data output with a clocked controller or FPGA. Using the internal reference minimizes support components, while selecting an external reference can support a more controlled measurement calibration scheme. Validate gain accuracy, bandwidth, aperture behavior, clock jitter, and output timing in the final instrument. For workloads needing shorter acquisition intervals, the pin-compatible 80 MSPS ADS831 may reduce conversion time.

🏭

Industrial Data Acquisition

The ADS830E/2K5 supports compact industrial acquisition modules that must convert analog sensor or process signals at up to 60 MSPS. Its single +5 V supply simplifies integration with conventional control electronics, and the 20-pin SSOP package limits footprint requirements compared with larger converter packages. Differential input can be selected for sensor interfaces and balanced lines where common-mode rejection is beneficial, while single-ended operation simplifies less demanding channels. The parallel output connects naturally to acquisition logic or an FPGA when timing margins are managed correctly. At the board level, isolate analog and digital return currents, place bypass capacitance near the supply and reference pins, and use short clock routing. Confirm the sensor bandwidth, environmental temperature range, grounding strategy, and production test requirements before deployment.

📱

Portable Diagnostic Equipment

The ADS830E/2K5 is suitable for portable diagnostic and monitoring equipment where rapid, compact 8-bit conversion is needed within a limited power budget. Its 170 mW operating-power specification helps reduce heat in a battery-powered enclosure, and the SSOP-20 package supports compact assembly. The converter can capture pulsed or repetitive analog events when the front end preserves the required bandwidth and the acquisition clock is synchronized to the source. Differential operation is advantageous for probe, sensor, or balanced test interfaces, whereas single-ended operation reduces analog complexity. The parallel data bus requires enough board area for routing and may drive an FPGA, microcontroller, or dedicated capture logic. Validate battery-energy demand, clock jitter, input settling, data timing, and the thermal rise of the assembled device during worst-case sampling.

What are the key specifications of ADS830E/2K5 that engineers should know?
The ADS830E/2K5 is an 8-bit pipelined ADC with a maximum sampling rate of 60 MSPS, 49.5 dB SNR, 0.2 LSB differential nonlinearity, and 170 mW power consumption. It operates from a single +5 V supply and accepts single-ended or differential input through a programmable 1 Vpp or 2 Vpp input range. According to the Texas Instruments ADS830 datasheet, the converter uses an 8-bit quantizer, a high-bandwidth track-and-hold stage, and an internal reference with an external-reference option. It is packaged in a 20-pin SSOP.
What is the operating voltage of ADS830E/2K5?
The ADS830E/2K5 operates from a single +5 V analog supply. According to the Texas Instruments ADS830 datasheet and product page, the device is designed for single-supply operation while supporting single-ended or differential analog input. The exact minimum and maximum supply limits and allowed input-voltage relationship must be checked against the manufacturer datasheet before final circuit design. The converter also requires appropriate reference and bypass-capacitor connections to preserve signal-to-noise performance.
How fast does ADS830E/2K5 sample analog signals?
The ADS830E/2K5 samples at up to 60 MSPS. Its pipelined CMOS architecture uses an 8-bit quantizer and a high-bandwidth track-and-hold circuit, allowing successive conversions to proceed rapidly. According to the Texas Instruments ADS830 product page, the maximum sampling frequency is 60 MHz. This rate is suitable for video digitization, communications signal chains, medical imaging, and test instrumentation where the analog input bandwidth must be sufficient for the selected sampling rate.
Where can I download the ADS830E/2K5 datasheet PDF?
The official ADS830E/2K5 datasheet is available through Texas Instruments at https://www.ti.com/lit/ds/symlink/ads830.pdf. The manufacturer part-details page at https://www.ti.com/product/ADS830/part-details/ADS830E/2K5 provides the ordering information and product support resources. Use the pin-description table, electrical-characteristics table, and typical-application diagrams from the manufacturer datasheet when assigning PCB nets and validating timing. The converter uses a 20-pin SSOP package.
Where can I find the ADS830E/2K5 pinout?
The ADS830E/2K5 pinout is documented in the pin-configuration section of the Texas Instruments ADS830 datasheet. The device uses a 20-pin SSOP package with a parallel output interface, analog supply and reference connections, analog input, and digital control or data pins. Consult the manufacturer pin-description table before assigning tracks because clock, analog, reference, and digital outputs require different routing practices. The official product page also identifies the converter as pin-for-pin compatible with the 8-bit, 80 MSPS ADS831.
ADS830E/2K5 vs ADS831 - which is better for video digitization?
The ADS830E/2K5 is preferable when 60 MSPS is sufficient and lower power is important, while the ADS831 is preferable when an 80 MSPS conversion rate is needed. Both are 8-bit Texas Instruments converters in a 20-pin SSOP package, and Texas Instruments states that the ADS830 is pin-for-pin compatible with the ADS831. The ADS830E/2K5 consumes 170 mW. For video timing, verify the required pixel clock, analog bandwidth, output latency, and acquisition-clock relationship before selecting the faster option.
What is the difference between ADS830E/2K5 and ADS831?
The primary documented difference is conversion speed: the ADS830E/2K5 operates to 60 MSPS, while the ADS831 reaches 80 MSPS. Both devices provide 8-bit conversion and use the same 20-pin SSOP footprint, with Texas Instruments identifying the ADS830 as pin-for-pin compatible with the ADS831. The higher ADS831 rate can reduce acquisition time for faster waveforms. Conversely, the ADS830E/2K5 may offer a more favorable power profile for designs that do not require the additional sampling rate.
When should I choose ADS830E/2K5 over ADS831?
Choose the ADS830E/2K5 when the design requires 8-bit conversion at no more than 60 MSPS and its 170 mW power specification is preferable to the faster ADS831. The two devices share the same 20-pin SSOP footprint, which simplifies hardware reuse. Select the ADS831 when the acquisition system must sample at up to 80 MSPS or when its timing and conversion performance better matches the source signal. For either choice, verify the analog input bandwidth, SNR, output timing, reference arrangement, and downstream logic interface.
Is ADS830E/2K5 suitable for medical imaging and communications?
The ADS830E/2K5 is suitable for medical imaging, communications, video, and test instrumentation applications identified by Texas Instruments. Its 60 MSPS rate, 8-bit quantization, 49.5 dB SNR, and selectable single-ended or differential input provide a practical combination for many intermediate-frequency and sampled-signal systems. Differential operation can help suppress common-mode disturbance, while internal or external reference selection supports different accuracy architectures. Confirm the required bandwidth, noise performance, isolation needs, and regulatory requirements for the finished equipment.
What can replace ADS830E/2K5?
The ADS831 is the documented drop-in alternative for the ADS830E/2K5 because Texas Instruments states that the ADS830 is pin-for-pin compatible with the 8-bit, 80 MSPS ADS831. Both use a 20-pin SSOP package. The ADS831 increases the maximum sampling rate from 60 MSPS to 80 MSPS, so it is a functional upgrade rather than an exact performance replica. Confirm clock timing, output timing, analog input range, power conditions, and PCB signal integrity before substituting it into an existing design.
What is the best ADS831 equivalent for ADS830E/2K5?
The ADS831 is the best documented pin-compatible equivalent for the ADS830E/2K5. The manufacturer identifies the devices as pin-for-pin compatible in the same 20-pin SSOP package, while both perform 8-bit conversion. The ADS831 raises the maximum sampling frequency from 60 MSPS to 80 MSPS, which can shorten acquisition time but may require review of clock, thermal, and output-timing requirements. No cross-brand drop-in replacement is established by the available manufacturer and cross-reference information.
Is ADS830E/2K5 the same as ADS831?
The ADS830E/2K5 and ADS831 are pin-compatible 8-bit pipeline ADCs in the same 20-pin SSOP package, but they are not identical in performance. The ADS830E/2K5 is specified to 60 MSPS, while the ADS831 reaches 80 MSPS. According to the Texas Instruments ADS830 product page, the devices are pin-for-pin compatible. This makes ADS831 a practical drop-in upgrade when faster sampling is needed, subject to confirming timing, bandwidth, power, and downstream interface requirements.
Where can I buy ADS830E/2K5 and check current availability?
Use the Request a Quote form on this page to request the current ADS830E/2K5 unit price, stock position, lead time, and order quantity from XAIPART. The Texas Instruments ordering page identifies the part as a 20-pin SSOP member of the ADS830 family, while the manufacturer part-details page provides supporting product information. For production planning, request the package quantity and delivery schedule that match your assembly requirements, including any tape-and-reel handling requirements.
What is the price of ADS830E/2K5?
The current ADS830E/2K5 price is generated through the Request a Quote form on this page because quotation status, volume, and inventory can change. Submit the required quantity and packaging preference to receive an actionable quote from XAIPART. For technical confirmation, the manufacturer identifies ADS830E/2K5 as an 8-bit, 60 MSPS, 20-pin SSOP converter with single-ended or differential input. Use the manufacturer datasheet for electrical limits before committing a design to procurement.
What is the lead time and stock status for ADS830E/2K5?
Request the current ADS830E/2K5 stock position and lead time through the Request a Quote form on this page. Enter the quantity, delivery target, and preferred SSOP handling method so the commercial response reflects the actual manufacturing plan. The Texas Instruments part-details page remains the authoritative source for product support and ordering information. For production scheduling, treat the quote response as the current commitment rather than relying on historical catalog availability.

Dữ liệu tham khảo kỹ thuật cho ADS830E/2K5 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ADS830E/2K5 when an 8-bit conversion rate of 60 MSPS is sufficient and the published 170 mW power figure suits the design. It is appropriate for video digitization, communications IF capture, medical-imaging signal chains, and instrumentation requiring single-ended or differential input with selectable internal or external reference. Choose the ADS831 when a shorter acquisition interval or 80 MSPS sampling capability is needed; its pin-for-pin-compatible SSOP-20 package simplifies PCB reuse, but clock timing, output timing, power, and bandwidth must be reviewed. For designs requiring greater than 8-bit resolution, use a higher-resolution ADC and expect a different package and interface. No cross-brand drop-in option is established, so board changes should not be assumed for an unverified substitute.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADS831
Package 20-pin SSOP 20-pin SSOP, pin-for-pin compatible
Brand Texas Instruments Texas Instruments
Resolution 8 bit 8 bit
Maximum Sampling Rate 60 MSPS 80 MSPS
Supply Voltage +5 V +5 V

Bảo phân biệt quan trọng

  • Lower 60 MSPS operating point than the pin-compatible ADS831 (vsADS831)
  • Documented 49.5 dB signal-to-noise performance (vsADS831)
  • 170 mW operating-power specification (vsADS831)
  • Pin-compatible upgrade path without footprint changes (vsADS831)

Ghi chú thiết kế

Keep the acquisition clock, analog input, and parallel output paths short, and provide a continuous return plane beneath high-speed signals. The 60 MSPS conversion rate requires attention to clock jitter and edge quality because timing variation can degrade conversion SNR. Route the clock away from sensitive analog inputs and use a compact, symmetrical output arrangement that minimizes data-bus skew between the ADC and the receiving logic.

Place input, reference, and supply bypass components close to their associated pins, and keep the analog return path separate from digital clock and output currents. Use the datasheet reference and decoupling network unchanged where possible because component placement and loop area can influence noise and distortion. Confirm that the SSOP footprint, pad geometry, solder profile, and assembly orientation match the manufacturer land pattern before releasing a PCB.

Estimated: the converter's stated 170 mW operating power corresponds to approximately 34 mA from a 5 V rail. This estimate uses the published 5 V supply and 170 mW power values. Actual supply current can vary with operating conditions, so validate the regulator headroom and power budget across sampling mode, reference selection, temperature, and load. Provide local bypass capacitance to prevent data-converter switching activity from disturbing adjacent analog circuitry.

Do not assume that a shared package alone guarantees identical operation. The ADS831 is pin-for-pin compatible with the ADS830 but increases the maximum sampling rate from 60 MSPS to 80 MSPS, so review clock timing, acquisition timing, output latency, power, and analog bandwidth before substitution. Also verify the selected single-ended or differential input range; the programmable ranges and reference configuration must match the external signal source.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The ADS830 is an analog-to-digital converter rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer product documentation.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ADS830E/2K5 datasheet ADS830E/2K5 pinout ADS830E/2K5 datasheet pdf Texas Instruments ADS830E/2K5 ADS830E/2K5 60 MSPS ADC ADS830E/2K5 SSOP-20 ADS830E/2K5 video digitization ADS830E/2K5 medical imaging ADC ADS830E/2K5 vs ADS831 ADS830E/2K5 drop-in replacement ADS830E/2K5 equivalent ADS830E/2K5 price ADS830E/2K5 stock ADS830 8-bit 60MHz ADC ADS830 SSOP-20 pinout

Các bộ phận và thuật ngữ liên quan

Texas Instruments ADS830E/2K5 ADS830 ADS831 8-bit ADC analog-to-digital converter pipelined ADC CMOS ADC track-and-hold circuit quantizer single-ended input differential input programmable input range signal-to-noise ratio differential nonlinearity parallel output interface internal reference external reference SSOP-20 surface-mount package video digitization medical imaging communications IF processing test instrumentation 60 MSPS
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ