ADS8681IPW - 16-Bit 1-MSPS SAR ADC | Texas Instruments
MPN: ADS8681IPW ✓ Hoạt độngADS8681IPW Tóm tắt
An analog-to-digital converter is a data-acquisition IC that converts an analog voltage into a numeric code for processing by a microcontroller, FPGA, or industrial controller. The ADS8681 belongs to the SAR ADC hierarchy, where a successive-approximation internal DAC determines the input voltage during each conversion. It also belongs to the broader ADC, data-converter, and semiconductor categories, making it suitable for precision measurement systems that must accept high-voltage industrial signals.
Key features include 16-bit resolution, a 1 MSPS conversion rate, one analog input channel, and programmable input ranges extending to ±12 V. The integrated analog front end accepts bipolar industrial signals, while the overvoltage-protection circuit extends tolerance to ±20 V. An on-chip 4.096 V reference provides the conversion baseline and is specified as having extremely low temperature drift. The device also uses an integrated reference and input-driver structure to simplify acquisition-circuit design.
The 5 V single-supply architecture supports compact mixed-signal designs where the analog input can exceed the supply rails. The SAR conversion principle provides predictable sampling behavior, while the programmable input ranges allow one board design to cover several conventional voltage classes. Its 16-TSSOP package has a 0.173 inch, 4.40 mm body width, and the IPW ordering option is supplied in a tube according to the product listing.
Typical applications include industrial process-control instrumentation, factory data acquisition, PLC analog-input modules, power-system monitoring, laboratory measurement equipment, and embedded data-logging systems. The ±12 V input capability is particularly useful when the source is a transducer or sensor-conditioning circuit rather than a ground-referenced 0-to-5 V signal.
The main design consideration is analog conditioning. Place input filtering close to the ADC pins, use the manufacturer’s recommended reference and supply bypassing, and account for the input-filter bandwidth limitation identified in TI’s support material. Check settling behavior and acquisition timing before sampling signals whose frequency approaches the converter’s 1 MSPS capability.
This page combines the manufacturer’s device information with package details, practical implementation guidance, application guidance, and a parameter-by-parameter comparison with pin-compatible ADS868x options. It is intended to help engineers assess package reuse, input-range compatibility, acquisition timing, and production sourcing before selecting the ADS8681IPW.
Bộ thay thế dễ dàng lắp đặt cho ADS8681IPW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
ADS8685IPW
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADS8689IPW
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADS8681IPWR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS8681IPW Tỷ lệ tối đa & tính chất điện
| ADC Type | Successive-approximation SAR ADC |
| Độ phân giải | 16 bit |
| Maximum Sampling Rate | 1 MSPS |
| Number of Analog Input Channels | 1 channel |
| Programmable Input Ranges | ±12 V, ±10 V, ±6 V, ±5 V, and ±2.5 V |
| Analog Supply Voltage | 5 V |
| Internal Reference Voltage | 4.096 V |
| Reference Temperature Drift | Extremely low; exact value not stated |
| Overvoltage Protection | Up to ±20 V |
| Analog Front End | Integrated input-driver circuit |
| Hộp | 16-TSSOP, 0.173 inch (4.40 mm) body width |
| Kiểu lắp đặt | Surface mount |
| Ordering Package | Tube |
Hướng dẫn cấu hình chân ADS8681IPW tube
Cấu hình chân cho ADS8681IPW (tube gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho ADS8681IPW.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADS8681IPW phù hợp cho 6 Áp dụngs: Industrial Process Measurement, PLC Analog Input Module, Factory Automation Data Acquisition, Power-System Monitoring, Laboratory Instrumentation, Embedded Sensor Logging.
Industrial Process Measurement
The ADS8681IPW suits process-control inputs where a sensor or transmitter produces a bipolar industrial voltage rather than a low-level 0-to-5 V signal. Its programmable ranges include ±12 V, ±10 V, ±6 V, ±5 V, and ±2.5 V, while 16-bit resolution preserves fine numerical distinctions in the converted result. Place the selected input-range network and filtering close to the converter, and use the integrated 4.096 V reference to establish a stable conversion baseline. The 1 MSPS SAR rate provides margin for supervisory measurements while the ±20 V overvoltage capability helps manage transients encountered around industrial wiring.
Được đề xuất
PLC Analog Input Module
The ADS8681IPW can form the analog front end of a PLC or remote I/O module that must monitor bipolar plant signals. Its 16-TSSOP package supports compact board layouts, and the 1 MSPS conversion rate is more than adequate for many continuously monitored process variables. The broad range-selection options allow the same converter family to cover voltage levels commonly encountered in automation cabinets. Engineers should place protection and input filtering at the connector, keep those high-impedance analog traces short, and separate them from digital communication traces to preserve conversion quality.
Được đề xuất
Factory Automation Data Acquisition
Factory systems often combine slow-changing sensor values with occasional high-speed diagnostics, making the ADS8681IPW a useful channel converter when 16-bit precision is more important than maximum throughput. The single-channel SAR architecture performs deterministic successive-approximation conversion at up to 1 MSPS and includes the analog input driver needed for direct acquisition-system implementation. A practical design can select the correct bipolar range in hardware, acquire the code over the serial interface, and periodically check the status signals. Filtering should be sized against both the 1 MSPS conversion capability and the lower 15 kHz analog bandwidth identified by TI support material.
Được đề xuất
Power-System Monitoring
The ADS8681IPW can digitize bipolar voltage-monitoring signals used in power-control and laboratory systems where the measured quantity may exceed the 5 V supply. Programmable input ranges up to ±12 V reduce the need for a separate attenuator, and the integrated 4.096 V reference avoids an additional precision reference component in basic designs. The converter’s 16-bit resolution provides 65,536 code levels, allowing small changes in a conditioned measurement to remain distinguishable. Protection components, isolation boundaries, reference grounding, and safety-rated PCB spacing remain system-level requirements and should not be inferred from the ADC’s ±20 V input tolerance.
Được đề xuất
Laboratory Instrumentation
The ADS8681IPW is appropriate for compact laboratory instruments that acquire bipolar voltage measurements with moderate bandwidth. Its 16-bit resolution, integrated reference, and selectable voltage ranges reduce the component count compared with a discrete ADC and reference design. The SAR conversion process can provide a straightforward acquisition sequence for a microcontroller-controlled instrument. For oscilloscope-like measurements, use an external front end with suitable attenuation and bandwidth; the ADC’s 15 kHz analog-filter limitation means higher-frequency waveforms require additional design work rather than direct connection to the input pin.
Được đề xuất
Embedded Sensor Logging
Battery-powered or embedded monitoring systems can use the ADS8681IPW when a sensor produces a bipolar voltage and the logger needs higher resolution than an 8- or 12-bit converter. The integrated reference and analog driver reduce external circuitry, while the 16-pin TSSOP package supports compact assembly. Program the range that best uses the converter’s conversion span, and condition the sensor output close to the ADC to minimize noise pickup. The same device can capture slow environmental signals with substantial numerical resolution, although the complete system’s power budget and sampling interval should account for the 5 V analog supply and external interface circuitry.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADS8681IPW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADS8685IPW | ADS8689IPW | ADS8681IPWR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit |
| Maximum Sampling Rate | 1 MSPS | 1 MSPS | 1 MSPS | 1 MSPS |
| Number of Input Channels | 1 channel | 1 channel | 1 channel | 1 channel |
| Analog Supply | 5 V | 5 V | 5 V | 5 V |
| Internal Reference | 4.096 V | 4.096 V | 4.096 V | 4.096 V |
| Orderable Packing | Tube | Tube | Tube | Tape and reel |
Bảo phân biệt quan trọng
- Broad programmable bipolar input selection (vsADS8685IPW)
- Integrated precision conversion baseline (vsADS8689IPW)
- Exact electrical equivalent with assembly flexibility (vsADS8681IPWR)
Ghi chú thiết kế
Place the input protection, range-selection, and filtering components close to the ADS8681IPW analog input and reference pins. Keep the sensitive input trace short, avoid routing it beneath digital clock or serial-data paths, and provide an uninterrupted ground plane. Follow the reference and decoupling network shown in the manufacturer’s application circuit. The 4.096 V internal reference simplifies the BOM, but its bypass and routing still require careful implementation to avoid introducing acquisition noise.
Account for acquisition time and input settling before interpreting the 1 MSPS figure as usable signal bandwidth. TI support material identifies a 15 kHz input-filter bandwidth for ADS8681, so use an explicit low-pass network when aliasing must be controlled. Establish the cutoff from the source impedance, permitted transition area, and required attenuation rather than treating 1 MSPS as the input bandwidth. Validate settling and noise with the selected range and the actual converter timing.
Use a clean 5 V analog supply and place the recommended bypass capacitors directly between the supply and ground pins. Decouple noisy digital or switching supplies before they reach the ADC, and route return current away from the sensitive input reference. The integrated overvoltage protection to ±20 V is not a substitute for a correctly selected external surge or ESD network. Verify that external protection leakage and capacitance do not degrade input accuracy or acquisition settling.
Thông tin tuân thủ
Compliance status requires confirmation from the manufacturer’s current product documentation. No standardized compliance designation should be inferred solely from the surface-mount package.